Where are the commands?

I am just starting with my new Flash CS4 and I'm confused about the Commands menu. I want to create a slide show, and all the instruction that I've read say to start by clicking on Commands->Create Slideshow. But when I look in the commands menu, I don't see "Create Slideshow" or much of anything else, either. Where is Create Slideshow? This is the very first time I've used Flash CS4, so there may be some setup necessary to make the command(s) available, but I don't see anything like that in the instructions that I've found so far. Where is "Create Slideshow"?
Thanks for your help,

I still can't figure this out. This is probably a simple newby issue, but what is the Flash CS4 Commands menu supposed to contain on installation? Might I need to install something else to populate it with the "Make Slideshow". All the information that I've seen online seems to imply that it's part of the initial installation.
Thanks, in advance, for any help you can give me on this.

Similar Messages

  • Where are the home and end buttons

    so i'm new to mac and purchased a mac book pro and that's when it hit me, where are the Insert, Home, End, Page Up, Page Down keys? Where are the arrow keys. I'm not much of a track pad user and although I think it is awesome I like to keep my hands on the keyboard as much as possible.
    Also, is it me or does the Delete key on a Mac move in the wrong direction (from right to left instead of left to right)?

    Welcome to Apple Support Communities.
    The answer is the Fn key...
    Held down in addition to the Left arrow is Home, with the Right arrow key is End, with the Up arrow key is PgUp, with the Down arrow key is PgDn, and with to the Delete key is Forward Delete.
    You might find it helpful to enable the Keyboard Viewer in Hardware, Keyboard, Show Keyboard viewer in menu bar. On OS X 10.6 it displays a flag for your selected country. (Not sure about OS X Lion 10.7 though.) When enabled, click on the flag and select Show Keyboard Viewer. As you press Shift, Fn, Ctrl, Alt/Option, and Command you will see onscreen what keystrokes result, separately and in combination.

  • SYSLOGD gone wild - where are the files?

    Hey all,
    Yesterday I had 15GB of free HD yesterday, it told me today that I was down to 100MB.
    Confused - because I haven't added any files, I check the activity monitor and found that SYSLOGD was running, and using an absurd amount of processor and disc access.
    I searched on it, and it seems to relate to Time Machine, which I'm not using.
    SO... I rebooted, and now it's not running any more.  BUT - the hard disc space is still gone, and I don't know where the files are that I need to delete to free it up.
    I've loaded a disc scanning utility to try to find where a new 15GB file might be hiding, but I'm thinking it's in the hidden area of the disc.
    QUESTION 1 : Where are the files SYSLOGD wrote and how can I delete them?
    QUESTION 2:  What made it run, and how can I keep it from happening again?
    Thanks!

    If you're looking for trash sounds, those are located in /System/Library/Components/CoreAudio.component/Contents/Resources/SystemSounds/ . If you're wanting to change the put stuff in trash and empty trash sounds, then follow these steps.
    Convert your sounds to aif, save them in some convenient location.
    Replace the two sound files *"move to trash"* and *"drag to trash"* inside the Finder and Dock folders, respectively, inside the SystemSounds folder, with the one you want for putting things in the trash and the *"empty trash*" one inside the Finder folder with the new one for emptying the trash.
    Ensure that you rename the new ones the same as the originals. (I usually copy the originals and add a .bak suffix so I can restore the sounds to their original condition.)
    OPTION-click the Finder's Dock icon and select Relaunch.
    Do note that if you'll have to authenticate to copy, rename, and replace these files. I use the Terminal with the sudo command to affect the changes.

  • Where are the results (report) stored

    Running Oracle 10g on Solaris 10 SPARC
    Have run the following commands (get info for fine tuning of Oracle 10g on Solaris 10):
    from SQLPlus
    execute dbms_stats.gather_dictionary_stats;
    and
    execute dbms_stats.gather_fixed_objects_stats;
    Where are the results stored [table name ? path to file ?]
    and is there documentation as to how to interpret the stats data collected?
    Thanks

    1) These two "stats" are run for the sole use of the OptimizerMainly, yes.
    2) Should these be run periodically to provide
    updated information to the system(Oracle)?
    if so, how often..Depends on the tables and what they are being used for.
    Some tables may require daily updating of stats, others less frequently or never.
    Any other infomation you can provide or point me to a
    document that explains this?http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/stats.htm#sthref1466

  • Where are the actual Aperture files located? Only in the application? I am transitioning to Lightroom and would like to only move some of the files. Advice appreciated. Also anyone know how to transfer in with edits?

    Where are the actual Aperture files located? Only in the application? I am transitioning to Lightroom and would like to only move some of the files. Advice appreciated. Also anyone know how to transfer in with edits? Using iMac, OS X, most recent Aperture and Lightroom 5.7 with plugin for Aperture.

    Define "the Aperture files".
    Read this concise guide.
    The files you imported into an Aperture Library can be exported (at any time, and repeatedly) using the command "File ▹ Export ▹ Originals".  Your Originals are never altered.  What went in is what comes out.
    Adjustments and changes to the metadata that you made since creating an Image in Aperture by importing a file are saved to a text file.  This file is combined, on-the-fly, with the Original to create the Image that you see in Aperture.  There is no file saved to disk that is the full-size Image.  Thumbnails are saved, and Previews are saved.  These are JPG files, almost always smaller than the Original.  They are not substitutes for the Image for the use you have.
    When you need a file of an Image to use in another program, you export the Image from Aperture.  "Export" means "Make me a file of this Image according to these file specs I'm providing".  The way to get files of your adjusted Images is simple:  create them by exporting.  Specify "Original size", and use a loss-less image-file format (e.g. TIFF 16-bit) if you want to retain as much visual information as possible.
    Search the Web for information about transitioning from Aperture to Lightroom.  Note that I say "transitioning".  You cannot move a database from one format to another without significant changes, and likely some loss of information.  Adobe provides a tool and some instructions.  I strongly recommend working out the process step-by-step, and then proceeding with first a few Images, then a bushel-ful, and stopping to use the first few, the the bushel-ful, before committing your entire collection to the process.
    As always, never use any computer file without having a back-up.
    We have seen mixed reports here of the success of the LR tool that creates a LR database from your Aperture database.
    If you want to carefully define the process, and test and refine it, use the excellent process-development, analysis, and execution program inShort.
    Sadly, there is not and can never be a good, thorough re-positioning of the digital assets in your Aperture Library to become digital assets in a LR database.  Just as a metaphor for any user contemplating transitioning to another digital asset manager:  that would be like digging up a house in one country, planting it in a hole in another country, and expecting to be able to use the toilet and the sinks, turn on the lights, cook dinner, and sleep soundly.
    HTH,
    Kirby.

  • Where are the portal one lib jars in 6.0?

    i want to know where are the lib jars in portal server 6.0? what directory....

    DSAME installs its packages and files in a directory named SUNWam.
    The file system layout for a Solaris installation is as follows:
    /opt/SUNWam/
    * bin/ ---> contains executables such as amserver & amadmin.
    * docs/ ---> contains DSAME documentation.
    * java/ ---> contains the Java Development Kit.
    * locale/ ---> contains the internationalization resource files.
    * servers/ ---> contains the iPlanet Web Server.
    * config/ ---> contains configuration files such as the iPlanet Directory Server name and port as well as XML files which define DSAME services.
    * dtd/ ---> contains the XML DTDs used by DSAME applications and services.
    * lib/ ---> contains DSAME jar files as well as platform specific C libraries.
    * migration/ ---> contains tools for iPlanet Directory Server data migration from earlier versions to version 5.1.
    * samples/ ---> contains sample java programs on how to use the DSAME Java APIs.
    * web-apps/ ---> contains two WAR-based deployments and their associated files: Services (authentication, policy management,
    identity management, SSO, SMS management, etc.) and Applications (DSAME console).
    /opt/SUNWps
    * Default installation directory for configuration information /etc/opt/SUNWps
    * Default installation directory for SDK /opt/SUNWps/sdk
    * Temporary files /usr/tmp
    * Log files /var/opt/SUNam/log
    * Container and channel display profile /opt/SUNWps/samples/desktop/dp-org.xml
    * Provider display profile /opt/SUNWps/samples/desktop/dp-providers.xml
    * HTML template files /etc/opt/SUNWps/desktop/default/channelname.template
    * JSP template files /etc/opt/SUNWps/desktop/default/JSPchannelname
    * Command-line utilities /opt/SUNWps/bin/
    * Tag library definitions /etc/opt/SUNWps/desktop/default/tld/*.tld
    * Display profile DTD /opt/SUNWps/dtd/psdp.dtd
    * Java properties files /opt/SUNWam/locale
    source: S1PS6 docs

  • Where are the drivers for HP LaserJet 5P for Windows 8.1 (64bit)?

    Had been using HP LaserJet 5p printer with HP LaserJet 5p printer driver, but had printer disconnect for a few months due to not have black toner.  Now I want to use the printer and my control panel does not show HP Laser 5p printer for my tablet but shows it for my laptop.   I can not find the driver on the HP support list and the support list does not recognize  HP LaserJet 5p.   
    Where are the drivers for HP LaserJet 5p for windows 8.1 (64bit)??????

    Hi,
    Basic print drivers are available for the HP Laerjet 5P via Windows Update.
    Follow these steps to install the printer drivers on Windows 8.1:
    http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03470332#N100AA
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Hi there, I pay for extra iCloud space online. However I cannot seem to find any of my photos or account? As my iPod/iPhone only hold 1000 pictures, where are the previous pictures? And how can I access them?

    Hi there, I pay for extra iCloud space online. However I cannot seem to find any of my photos or account? As my iPod/iPhone only hold 1000 pictures, where are the previous pictures? And how can I access them?

    You cannot use iCloud Storage to suppliment your iPad. They are mainly used to backup iPad.
    Free up space on iPad
    Settings>General>Usage>Storage>Delete what is not needed to free up space on iPad.

  • Where are the drivers?

    Alright it's probably a stupid question but I just bought a new mac that came with leopard.I used boot camp to partition and install windows vista on my new mac. Everything worked fine until I had to install the drivers.I don't know where the drivers are. They supposed to be in the leopard dvd that i don't have. Where are the drivers?

    Hi Obe7,
    the Mac OSX install disc that you used to install Leopard on your Mac is a 'hybrid'-disc, which contains an OSX part (only visible while in OSX) and a Windows part (only visible while in Windows).
    The BootCamp 2.0 drivers are on the Windows part of that disc.
    While in Windows insert that disc and usually the driver installation starts automatically.
    If not, use the Windows Explorer to navigate to the disc and start the 'setup.exe' file manually.
    Stefan

  • Where are the older BIOS versions gone?

    Hi
    A few weeks back, I've upgraded the BIOS on my Pavilion G6 1001sq to the latest version (F66). I noticed that the laptop is running considearbly hotter since then and I want to revert to an older BIOS version. When I go to the updates page on the HP website and click on "older versions available" I can only see the F66 version on the page I'm directed to ( http://h10025.www1.hp.com/ewfrf/wc/previousVersions?softwareitem=ob-115746-1&cc=us&dlc=en&lc=en&os=4... ), although a long list with many versions was available till recently. Where are the older versions gone?

    Unfortunately, I do not know where they have gone. HP is working on issues with the suport and driver servers at the moment.
    Since your notebook does have the UEFI Diagnostics installed, you should be able to rollback to the previous version that was installed. Use the firmware management option to do that.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Where are the print drivers found?

    I have a Brother HL 2040 laser printer. THe Brother website has a version 2.2 driver for this printer. I downloaded and installed. When I add the printer I keep getting version 1.4 driver.
    Can someone tell me where are the drivers found on my iMac?
    Also I am trying to get this to print via a Linksys wireless print server. Do I use the ip address for the print server or the printer when adding this.
    I tried using the print server IP but I get a "printer paused" issue. I think I need the new print driver.
    thanks in advance for any help.

    I have not gotten the driver to update to the newest version. I deleted the Brother Folders as mentioned in the replies, no joy. No matter what I do it ends up 1.4 not 2.0.
    Version 1.4 worked OK for a USB connection, so I went forward with trying to get the network connection going. By trying every combination available I got it to work.
    What HP jetdesk-socket has to do with my printer...escapes me. But that combination with version 1.4 driver works.
    I will leave well enough alone.
    I have 2 other computer to update to SL.....maybe.

  • Where are the epson drivers for Mavericks for the artisan 835

    Where are the epson drivers for Mavericks for the artisan 835

    OMT8 wrote:
    Well, I have this printer too, and I get the following response from the System Prefs Printers and Scanners when I select to add this printer:
    "The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software."
    When you go to the Epson website for this particular printer it says:
    "The latest drivers for this product are available only via Apple's Software Update."
    And finally, when you go to Software Update it says: "No updates available"
    I second OMT8.
    Yes, the driver file at http://support.apple.com/kb/DL1398 allowed me to finally install my printer, but does Apple have _any idea_ how long it takes to download a 1.08GB file over a 1.5mbps DSL connection?
    Never mind how much of my pricey new SSD is being consumed by the resulting 1.80GB of driver files all for _one_ printer driver that should maybe occupy 200K?
    Or that the primary article on OS X printer drivers (http://support.apple.com/kb/HT3669) -- which does indicate that the Artisan 830 is supported -- does not mention or link to the driver file that's needed to make it work?
    Or what a complete violation of Apple's "it just works" gestalt it is to be confronted with the above Catch-22 and to have to search the web and then go through all of the above to make a new laptop talk to a two-year-old printer?
    Yes, my printer now works, and yes, Apple's Support Communities were instrumental in getting to this point. But spending all morning (plus download time) getting a printer driver installed tastes way too much like I paid for Apple and got Microsquish.
    -carl-

  • HP Officejet Pro 8600 Wireless - Where are the printing shortcuts?????

    HP Officejet Pro 8600 Wireless Printer
    Windows 7
    Where are the printing shortcuts?????
    I just replaced a canon printer that died that had the concept of PROFILES, so that I could setup a PROFILE for each type of printing, i.e. 4X6 photos/documents/5X7 photos.  So it was easy for our family to print, they would pick each setting.
    Now with latest driver for 8600 there are NO way to save a set of settings for a printer.   I have seen some old discussions on this but I just can't believe HP doesn't have this type of functionality in their drivers.  I don't need the ePrint and all the other bogus stuff installed with the 8600 driver, but I DO NEED the ability to save different sets of printing options so I don't have to remember, borderless or not, landscape or not, etc and keep wasting photo paper/ink/regular paper with incorrect options.
    Here is another posting with similar points -> Customers are NOT getting full print functionality.  We don't care about the extra software, it is minimal.  Full functionality includes the ability to create profiles for different printing situations so that the user can easily choose that profile (and therefore all the myriad settings for that profile).  What HP has done is give us ONE profile, essentially, and every time you want to do something different, you have to change that ONE profile.  How is that helping?
    As I said, if I want to switch from a normal printing job (e-mail, web page, etc.) which uses my ONE setting, and then want to print a 4x6 photo, I have to remember to change at least 6 different settings.  With the shortcut, I would select my "borderless photo" shortcut, and it would automatically switch paper trays, size, color, quality, you name it.  Now you force me to change that each and every time.
    If someone can explain why this is considered full functionality I would be extremely grateful.

    Hello,
    I am sorry you are having trouble with your print experience.
    I am going to make some assumptions here, which could be wrong in your case, but might help others.  Since you mention printing from Windows7 and ePrint in the same thread, can I assume you are trying to print using the HP ePrint driver for windows (www.hp.com/go/eprintsoftware) ?  The ePrint driver also comes preinstalled on all HP laptops and pcs now, so maybe you made a recent pc purchase and therefore have the ePrint driver installed?
    The goal of the ePrint windows driver currently has a lot less to do with providing the hundreds of print features and settings that the full featured, product specific print drivers provide.  The goal is to enable customers to be able to print to any recent or new HP printer through a number of different connection paths from a single installed print driver / print queue.  Once the ePrint driver is installed, printing with that driver will dynamically find direct network printers, cloud enabled printers, public print locations, direct wireless printers, etc., and create the correct print format depending on the print path taken.  If the printer is ePrint cloud enabled and has a good internet connection, the printer and the pc do not have to be in the same location.  For example, you can print from home to your printer at work.  You can send photos of the kids to your mom's printer in another state, etc.  The ePrint solution is also good for the traveling worker who just wants to send the occasional print job to the nearest network or wireless direct printer without having to find and install another print driver for each new printer.  One driver, one queue and you can print to any recent or new HP printer.
    The ePrint driver has a few important print settings that customers may want to use (copies, duplex, grayscale, etc).  More may be added over time depending on demand.
    BTW, because the ePrint driver does not have a ton of print settings to handle, the rendering of print jobs is as simple and efficient as possible and should not bog down your pc.
    If you want all the bells and whistles in the print driver experience and just want to print to a single printer you can download and install the product specific print driver from hp.com  
    I hope that helps out a few people who may be wondering what the purpose of ePrint is!!
    Good luck.
    I am an HP employee, but these are my own thoughts and suggestions

  • What are the commands available to read a file from application server and

    What are the commands available to read a file from application server and store the file into an internal table?

    Hi,
    To read a file from an Application Server to an Object there is a command in ABAP called <b>READ DATASET</b>. After that file is transported to that object you have to do a loop and put that data in an Internal Table.
    This statement exports data from the file specified in dset into the data object dobj. For dobj, variables with elementary data types and flat structures can be specified. In Unicode programs, dobj must be character-type if the file was opened as a text file.
    For dset, a character-type data object is expected - that is, an object that contains the platform-specific name of the file. The content is read from the file starting from the current file pointer. After the data transfer, the file pointer is positioned after the section that was read. Using the MAXIMUM LENGTH addition, the number of characters or bytes to be read from the file can be limited. Using ACTUAL LENGTH, the number of characters or bytes actually used can be determined.
    In a Unicode program, the file must be opened with an arbitrary access type; otherwise, an exception that cannot be handled will be triggered.
    If the file has not yet been opened in anon-Unicode program, it will be implicitly opened as a binary file for read access using the statement
    OPEN DATASET dset FOR INPUT IN BINARY MODE.
    . If a non-existing file is accessed, an exception that can be handled can be triggered.
    Influence of Access Type
    Files can be read independently of the access type. Whether data can be read or not depends solely on the position of the file pointer. If the latter is at the end of the file or after the file, no data can be read and sy-subrc will be set to 4.
    Influence of the Storage Type
    The import function will take place irrespective of the storage type in which the file was opened with the statement OPEN DATASET.
    If the file was opened as a text file or as a legacy text file, the data is normally read from the current position of the file pointer to the next end-of-line marking, and the file pointer is positioned after the end-of-line marking. If the data object dobj is too short for the number of read characters, the superfluous characters and bytes are cut off. If it is longer, it will be filled with blanks to the right.
    If the file was opened as a binary file or as a legacy-binary file, as much data is read that fits into the data object dobj. If the data object dobj is longer than the number of exported characters, it is filled with hexadecimal 0 on the right.
    If the specified storage type makes conversion necessary, this is executed before the assignment to the data object dobj. Afterwards, the read data is placed, byte by byte, into the data object.
    System Fields
    sy-subrc Meaning
    0 Data was read without reaching end of file.
    4 Data was read and the end of the file was reached or there was an attempt to read after the end of the file.
    Thanks,
    Samantak.
    <b>Rewards points for useful answers.</b>

  • Where are the plus and minus keys on a Pavilion dv6-3150us Entertainment Notebook?

    Where are the plus and minus keys on a Pavilion dv6-3150us Entertainment Notebook?  Joe
    Joe B.

    Its on the keyboard somewhere on top center close to the number keys. To be straight, its just below F12 key. 
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

Maybe you are looking for

  • How do I use a xbox360 controller in labview 7?

    So I've just been given a project in my research lab.. We have to control a gantry arm using labview.  The gantry control is already completely written out in labview using a datasocket server.  However, I've never worked with Labview before.  All I

  • More that four decimals in Order quantity in VA01

    In sales order i want to add four digits after the decimals. For example the order quantity is  23.2345 Kgs i should be able to enter, but system at present is allowing 23.456 Kg. If i enter 23.2345 KG the system is giving error that iput data format

  • I don't have the airplay button

    I have a iPhone 4 ios 6.1.3 and for some reason I never get the airplay button. I do not have an apple tv, however I do have the reflector app, which is what i am trying to connect to. I have even once seen the airplay button on my phone. I am connec

  • Changing my App. store I.D

    How can I change my previous App-store I.D for a new one in macbook. beacause i can't do any updates while having the old account that i totally lost.

  • 2 variables on the same characteristic

    Hi Experts, Currently I'm using BEx BI7.x. I restrict a characteristic Scenario with 2 variables for FACT and PLAN. When entering both values on the selection screen and opening a workbook the PLAN variable is Not assigned. When I update the workbook