Where are the explanations for the error codes in Envy 120 EWS Event Log

I have been having trouble with the printer, and following diagnostic recommendations from a separate thread, have looked at the event log.
I see a series of events, mostly 74899 Printer Event and 74741 Network Information.
What I DO NOT SEE is any explanation of these events, and whether they are normal or indications of trouble.
I have also searched online for the Secret Message Decoder but nothing was found with Bing or Google.
Seriously, what value are the codes without a way to interpret them?
I beginning to regret my long-term loyalty to HP products.

Hello @mikerb,
I have read your post on how your desktop computer is displaying an error message in regards to a Kernel event log, and I would be happy to assist you in this matter!
To further diagnose this issue, I recommend following the steps in this document on Windows Kernel event ID 41 error "The system has rebooted without cleanly shutting down first". This should help to resolve the critical error message.
Just to be on the safe side, I also suggest following this resource on Testing for Hardware Failures (Windows 8); which should help determine if there is a hardware defect with one or multiple hardware components on your computer.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

Where are their manufacturing facilities for the iphone?

Where are their manufacturing facilities? And who are their software vendor partners?
Please anyone help me with this information i need it for a computer class.
Thanks its much appreciated!

iPhones, as is the case with most consumer electronics nowadays, are manufactured in China as a web search would have quickly turned up. I don't know what you mean by "software vendor partners".

Error while importing tabledata: There are no readers registered for the

I try to import data from another table. I exported in different types - sql and xml, cvs... Now if Itry to import this data SQLDeveloper is boring me with the Message:
"There are no registered readers for the sql type."
or
"There are no registered readers for the xml type."
or
"There are no registered readers for the cvs type."
So where do I have to register wich readers?
Another Problem: I tried to start the import "semi-" manually while copiieng the INSERT-Statements from the sql-Dataset to SQLDeveloper. So I noticed that the exported Date has Commas instead of points - like here:
.'650.507.9833'.to_date('21.06.99','DD.MM.RR').'SH_CLERK'.2600.null.124.50);
Is it possible to configer the SQLDeveloper, because this statement causes an error.
Thanks a lot
Torsten

My Operating System is Window XP professionel and there is jre 1.4 running. When I execute the SQL-Statement I get the following result:
PARAMETER VALUE
NLS_NUMERIC_CHARACTERS ,.
1 rows selected
The thing that really makes me thoughtful is that SQLdeveloper doesn't know its own export-format...
greets
Torsten

Error -90032 occurred at Error in function centref at line 5 column 8: The indexes are out of bounds for the variable you specified

Sir,
i am running a matlab code in mathscript of labview but getting an error
Error -90032 occurred at Error in function centref at line 5 column 8: The indexes are out of bounds for the variable you specified
this code running successfully in matlab
please help me in this regard
a .vi format file is attached named as mfcc_new.vi
Attachments:
mfcc2.vi ‏35 KB
mfcc_new.vi ‏111 KB

May I see you have 6 inputs to your Mathscript Node. When you test it in Matlab I suposse that you're using some values for this inputs and everything work as expected. Then, run it in Labview using highlight execution, retaining wire values and using single stepping. Check the values which are being inserted to your Mathscript Node and ensure that they are correct. You're having an "indexes out of bounds" mistake, so it probably means that there is something wrong with the inputs according to your expectations. You can also put the MathScript alone in another VI and insert the inputs you're expecting manually and check in the same way.
Good luck!

I had to replace the hard drive on my computer. I am now trying to download Adobe Photoshop CS6, previously purchased. I get an error that files are missing after waiting for the whole download. I have Windows7

I had to replace the hard drive on my computer. I am now trying to download Adobe Photoshop CS6, previously purchased. I get an error that files are missing after waiting for the whole download. I have Windows7

The error msg said that the file archive part of Adobe photoshop CS6 is missing and that I need all parts in the same folder.

Where is the Download Booster for the Samsung Galaxy S5? It's advertised in your pamphlets your stores are handing out...

Where is the Download Booster for the Samsung Galaxy S5? It's advertised in your pamphlets your stores are handing out but yet the software feature appears to be hidden or worse yet stripped out of the phone altogether . This blatant false advertising...Please advise!

It is (My Guess) something in the fine print that says "Subject to change without notice" VZW did some similar things with the S4 and customers were very unhappy with that as well. With those features I think some we enabled later when they sent out a software update and said nothing about it. They also added a feature which they said nothing about and that feature was enabled for everyone as default and if you used it past the trial period they started charging you for it. Now that is very deceptive so I really think VZW is very deceptive to its customers and they won't even keep a straight face about it. They just keep that pretty little smile and we just turn away and walk. Good luck with your endeavor though.

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

Getting the below error when running the Baseline.grf for the first time

I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
     at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
     at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
     at org.jetel.graph.Phase.free(Phase.java:487)
     at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
     at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
     at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
     at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
     at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
     at org.jetel.component.RunGraph.execute(RunGraph.java:302)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
     at org.jetel.component.RunGraph.execute(RunGraph.java:324)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !

It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
     LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com

There are no readers registered for the txt type - Issue importing txt file

Hello guys,
I am working on SQL developer 3.2. and Oracle database 11g. I am trying to import a txt file with only two columns and 100 rows separated with a pipe. I can import the same file if its in *.CSV or *.xls format. I right click on the table > Import table > Choose the *.txt file > and then I get a message "There are no readers registered for the txt type". Why? Where do I get the reader? I am using the same exact method and the same exact data to import using a different file format and I do not get any errors. The wizard comes up and I am ready to load. I have scoured through this forum for a solution and I could not find one. Any help is very much appreciated.
Thank you!

It means we don't support that file type for doing imports. It sounds like a reasonable request to [add to the Exchange|sqldeveloper.oracle.com] though.

The parameters supplied for the batch are not valid.

Error:The parameters supplied for the batch are not valid
Stored Procedure is as follows
CREATE PROCEDURE [dbo].[Usp_TrackVehicleDetails]
@reg_Number NVARCHAR(25)
AS
BEGIN
SET NOCOUNT ON;
DECLARE @Imei_Number NVARCHAR(25),
@Imei_Table
NVARCHAR(MAX),
@Latitude_Val
NVARCHAR(MAX),
@Longitude_Val NVARCHAR(MAX),
@Imei_PK
NVARCHAR(MAX),
@result INT
-- Tracking Device by means of Latitude and Longitude
SELECT @Imei_Number=Imei_No FROM MapDevice_Vehicle WHERE Vehicle_No=@reg_Number;
SELECT @Imei_Table='Imei_'+@Imei_Number
SET @Imei_PK='SELECT(MAX(CAST(Imei_Id AS NVARCHAR(MAX)))) FROM dbo.'+@Imei_Table;
SET @Latitude_Val='SELECT Latitude FROM dbo.' +@Imei_Table+' WHERE CAST(Imei_Id AS NVARCHAR(MAX))='+'('+@Imei_PK+')';
SET @Longitude_Val='SELECT Longitude FROM dbo.' +@Imei_Table+' WHERE CAST(Imei_Id AS NVARCHAR(MAX))='+'('+@Imei_PK+')';
EXEC @result= sp_executesql @Imei_PK,@Latitude_Val,@Longitude_Val
SELECT @result
--RETURN @result
BEGIN TRY
BEGIN TRANSACTION T1
-- Returning Values based on Vehicle_Number
SELECT ISNULL(@Latitude_Val,'')[latitude],
ISNULL(@Longitude_Val,'')[longitude]
IF @@ERROR!=0
BEGIN
ROLLBACK TRANSACTION T1
END
ELSE
COMMIT TRANSACTION T1
END TRY
BEGIN CATCH
SELECT ERROR_MESSAGE() AS ErrMsg, ERROR_LINE() AS ErrLine,ERROR_PROCEDURE() AS ErrProc
END CATCH
END

Your construct is not correct....
EXEC @result= sp_executesql @Imei_PK,@Latitude_Val,@Longitude_Val --These
should be parameters/....
Please try the below(The longitude and latitude to be included...)
/*Test script*/create table MapDevice_Vehicle(vehicle_no nvarchar(25),imei_no nvarchar(25))
Insert into MapDevice_Vehicle Select 'KL8P8234','KL'
create table Imei_KL(Imei_Id nvarchar(25))
Insert into Imei_KL Select 'KL8P8234'
exec [Usp_TrackVehicleDetails] 'KL8P8234'/*Test script*/
CREATE PROCEDURE [dbo].[Usp_TrackVehicleDetails]
@reg_Number NVARCHAR(25)
AS
BEGIN
SET NOCOUNT ON;
DECLARE @Imei_Number NVARCHAR(25),
@Imei_Table NVARCHAR(MAX),
@Latitude_Val NVARCHAR(MAX),
@Longitude_Val NVARCHAR(MAX),
@Imei_PK NVARCHAR(MAX),@paramdefs nvarchar(MAX),@result INT
-- Tracking Device by means of Latitude and Longitude
SELECT @Imei_Number=Imei_No FROM MapDevice_Vehicle WHERE Vehicle_No=@reg_Number;
SELECT @Imei_Table='Imei_'+@Imei_Number
SET @Imei_PK='SELECT(MAX(CAST(Imei_Id AS NVARCHAR(MAX)))) FROM dbo.+@Imei_Table';
SET @paramdefs = N'@Imei_Table nvarchar(255)';
--SET @Latitude_Val='SELECT Latitude FROM dbo.' +@Imei_Table+' WHERE CAST(Imei_Id AS NVARCHAR(MAX))='+'('+@Imei_PK+')';
--SET @Longitude_Val='SELECT Longitude FROM dbo.' +@Imei_Table+' WHERE CAST(Imei_Id AS NVARCHAR(MAX))='+'('+@Imei_PK+')';
EXEC @result= sp_executesql @Imei_PK,@paramdefs,@Imei_Table = @Imei_Table
SELECT @result
--RETURN @result
BEGIN TRY
BEGIN TRANSACTION T1
-- Returning Values based on Vehicle_Number
SELECT ISNULL(@Latitude_Val,'')[latitude],
ISNULL(@Longitude_Val,'')[longitude]
IF @@ERROR!=0
BEGIN
ROLLBACK TRANSACTION T1
END
ELSE
COMMIT TRANSACTION T1
END TRY
BEGIN CATCH
SELECT ERROR_MESSAGE() AS ErrMsg, ERROR_LINE() AS ErrLine,ERROR_PROCEDURE() AS ErrProc
END CATCH
END

Error!! Can not find the delivery details for the delivery Id :

hi all,
I have a report which i need to burst in seven different reports wherein my delivery key is column "emp_id". Now when i schedule the report to burst then the report completes with a warning. I see that there are various delivery cycles for the report and for one of the cycles i get the following message
Error!! Can not find the delivery details for the delivery Id :
hence, what happens due to this is, even there are successful deliveries for other delivery ids but then i get only two rows of data in each of the seven bursted ouput xls files. wheareas the data runs in thousands of rows for each cycle.
Hence whats happening is, that due to error /warning in one of the delivery cycles other reports are also not showing data.
I am not sure whats causing the issue and why i am not getting complete bursted files out.
Please suggest
Thanks
Ronny

I guess, you are in 10.1.3.3.2 :),
in the latest release 10.1.3.4.1, there are more enhancement wrto bursting and performance i believe.
check th release notes
can you send me the xml and bursting query you have, i can try simulating in my local.

Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit).

Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit). Have tried it on other browsers, and works as it should. The last add-on i installed for Firefox was "Fox Filter" so my kids couldn't accidentally stumble onto sites of immoral tastes. I can't see why that would have any effect, but it was the last update/add-on i installed to the browser, but even then,.......it was working fine for a week and a half afterwards until now. Please help.
== This happened ==
A few times a week
== A week and a half after i installed Fox Filter. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

Hello Steve.
You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
If you detect a faulty add-on, you should contact its author for support. You can also search for alternatives. Site filters are relatively common in the add-ons gallery: [http://addons.mozilla.org addons.mozilla.org].

Where can I change the font settings for the name of the month in iPhoto's calendar project?

where can I change the font settings for the name of the month in iPhoto's calendar project? I just ordered two copies of a calendar I designed in iPhoto and was surprised to find that the calendar's months were printing in something like an Arial 10 pt font. On previous calendars I've printer via iPhoto and Apple, the font was much larger. I've tried every menu option in iPhoto and the Calendar Project program and can't find where this is modifyable. Which leads me to ask, what the heck happened here in the first place? I did not consciously change the default.
I do remember that I got some notice when I first tried to print the calendar about the default font having been changed, but I don't know how this could have happened, and I didn't know what impact that had on the calendar until it was delivered. I typically print about a dozen annual calendars but won't buy another until I've got a handle on this problem. For the most part, the rest of the calendar is okay.
As a P.S. is there anywhere where one can get a power user's manual, or instruction on iPhoto?
Message was edited by: KPAausFrankfort

"Maximum" and "12" usually refer to compression (influencing image quality and jpeg file size in bytes); and as Curt wrote, dpi is meaningless for display by and viewing in web browsers. (It could be a different matter if you are uploading the jpeg files for someone to download from the web to print.)
What are the sequence of steps that you and your batch processing take from Bridge?
You can use call Photoshop's Image Processor from Bridge to create the jpeg files (Tools > Photoshop > Image Processor). In the Image Processor you can set jpeg compression, pixel dimensions if desired, also convert to sRGB (good idea for web display). In my experience the image processor leaves unchanged whatever dpi is set in the source file; or, if none there as might be for a pdf, it will set the dpi value in your New Document Preset Print Resolution (from your Photoshop Units & Rulers preferences).

Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

Hi,
I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder. "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
The files we're shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with still the same error.
I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash. I tried this twice....
    Thanks in Advance

Hi Hunt,
       Here is the skinny. A window base PC. footage shot with HD sony HD cameras, Project imported to Premiere CS3. Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality. Imported them to Adobe Encore CS3. After about ten files or so. I got the error message. Did all the basic trouble shoot like restarting the computer, got latest patch. Even build a new test project with the same problem.
    Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded. So it will be a double compression and I dont want that. So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
   what do you think ????
   Peter

Where are the explanatio​ns for the error codes in Envy 120 EWS Event Log

Similar Messages

Maybe you are looking for

Where are the explanations for the error codes in Envy 120 EWS Event Log