Where are the forum points gone?

My forum points getting displayed as 0...same with everybody in all forums...
I remember the same thing happened approx 2 months ago also...

Simple disconnect in the DB should be fixed now - in the future please report these issues to [email protected]

Similar Messages

Where are the forums for BEA Products? (Service Bus, Data Services, etc.)

There is a somewhat vague message on the old BEA forums saying they have been moved here - along with a link to a non-existent 'Welcome FAQ'.

(In an complete reversal of his previous comment, Hans states:)
I'm not sure whether the Aqualogic Forums have been migrated, or (if they have) what they have been mapped to. Can't find 'em either.
Oracle's recent webinar was pretty clear about JRockit and Weblogic server being the direction.
However, for Aqualogic - based on that same webinar, my misinterpretation is that Aqualogic is one of the 'merged' families, where the best of breed is being chosen for each subset or solution area. That may be causing a delay in the forums being transferred and/merged.
Hoping Oracle comes up with a document that clearly maps both the products and the forums. The list of products is
BEA AquaLogic User Interaction
BEA AquaLogic BPM
BEA AquaLogic Integrator
BEA AquaLogic Service Bus
BEA AquaLogic Data Services Platform
BEA AquaLogic Registry Repository
BEA AquaLogic Enterprise Security
BEA AquaLogic Enterprise Repository
BEA AquaLogic Service Registry
BEA AquaLogic Commerce Services
BEA AquaLogic SOA Management
BEA AquaLogic Pages
BEA AquaLogic Ensemble
BEA AquaLogic Pathways

Where are the forum bookmarks?

I've bookmarked a thread on these forums and now... where are these bookmarks being displayed?
This question was solved.
View Solution.

Hi trparky.
Welcome to the HP Consumer Support Community!
At the top of any forum page you can click the My Settings link. This will bring you to a page with several tabs, one of them being Subscriptions & Bookmarks. Here you can click the Bookmarks link and access all of your bookmarks.
You can also use this link: Bookmarks
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

Where are the status points?

Hi otn moderator,
May i know why the status points are removed from the otn profile? Are you going to change the system of awarding points or going to abandon the points system itself?
-Karthick

Yes. Any information would be good. May I missed any news about this?!
Reward system still in the FAQ. so I guess this is only a temporary situation.
But it would be good to get some insider info.
Found this at twitter... http://twitter.com/oracletechnet
@Boneist we are in the midst of a gigantic content migration, a little unstable at the moment - working it #otn_forums about 16 hours ago via TweetDeck in reply to BoneistEdited by: Kecskemethy on Oct 20, 2010 1:40 AM

Where are the bullet points?

Where can I find the bullet points in the new keynote????

Hello all,
I fixed this by placing each bullet point into its own text box. The indentation issue still exists though.
Thanks,
Nathan

Where are the Publics Points (Poi´s) added in the...

Hi, I am from Brazil and I added several publics points (Poi's) or points of interest (as restaurants, hotels, fuel points...) in the nokia maps web (maps.nokia.com). However they does not appear after in the search. When me and other people can see the new publics points?
Solved!
Go to Solution.

Hi, thank you for your reply.
Really the landmark was record in favorites. But the landmark (all) did not appear yet. I can not see it in the map until now. They were record last week. However, when i try add the same marker again the map inform me the marker already exist.
I did not receive message about 24 hours only about more information. Perhaps the problem is the service does not work complete with my country or i should use internet explorer rather google chrome.

Where are the Quicktime Transitions gone?

I miss the basic Quicktime Transitions like Push, Radial or Whipe. Does someone know if this effects are still aviable somewhere?

Thank you for your answers. I found that the transition Wipe will do almost the same job. For the moment I'm fine with that solution.

Where are the forums????

I can't find Final Cut Pro 7 forums... in fact I can't even find any forums. How do I find them, I stay out for a year and everything's changed. HELP!!!!

you may also find this User Tip by turingtest2 handy - SITEMAP | ASC
ÇÇÇ

Where are the older BIOS versions gone?

Hi
A few weeks back, I've upgraded the BIOS on my Pavilion G6 1001sq to the latest version (F66). I noticed that the laptop is running considearbly hotter since then and I want to revert to an older BIOS version. When I go to the updates page on the HP website and click on "older versions available" I can only see the F66 version on the page I'm directed to ( http://h10025.www1.hp.com/ewfrf/wc/previousVersions?softwareitem=ob-115746-1&cc=us&dlc=en&lc=en&os=4... ), although a long list with many versions was available till recently. Where are the older versions gone?

Unfortunately, I do not know where they have gone. HP is working on issues with the suport and driver servers at the moment.
Since your notebook does have the UEFI Diagnostics installed, you should be able to rollback to the previous version that was installed. Use the firmware management option to do that.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Where are the buttons gone File upload and Download in New ABAP Editor

Where are the buttons gone of File upload and Download in New ABAP Editor in ECC 6.0.
Or some new utility added for this feature.
Kindly guide.
Thanks,
pradeep

Go to Utilities>more Utilities>upload/download is there.
Amresh.

Anchor point in the Graph Editor and where are the Tips

Hello All,
What is the purpose of an anchor point in the Graph Editor when you have "Show Transform Box when multiple keyframes are Selected" engaged. The pointer automatically turns into a PanBehind tool. I moved it inside, outside, on the line and it doesn't seem to have any inpact on the scaling of the transform box. Not only that, it pops back to the center when you switch from "Edit Speed Graph" and "Edit Value Graph"
I haven't used the graph editor much, if ever and was also curious to know what/where are the graph tool tips. I haven't seen any difference when Show Graph Tool Tips is selected.
Thanks in advance
on a mac cs5.5

OK, I see the Tool Tips are displayed when you hover over a keyframe or the path that is made.

SYSLOGD gone wild - where are the files?

Hey all,
Yesterday I had 15GB of free HD yesterday, it told me today that I was down to 100MB.
Confused - because I haven't added any files, I check the activity monitor and found that SYSLOGD was running, and using an absurd amount of processor and disc access.
I searched on it, and it seems to relate to Time Machine, which I'm not using.
SO... I rebooted, and now it's not running any more. BUT - the hard disc space is still gone, and I don't know where the files are that I need to delete to free it up.
I've loaded a disc scanning utility to try to find where a new 15GB file might be hiding, but I'm thinking it's in the hidden area of the disc.
QUESTION 1 : Where are the files SYSLOGD wrote and how can I delete them?
QUESTION 2: What made it run, and how can I keep it from happening again?
Thanks!

If you're looking for trash sounds, those are located in /System/Library/Components/CoreAudio.component/Contents/Resources/SystemSounds/ . If you're wanting to change the put stuff in trash and empty trash sounds, then follow these steps.
Convert your sounds to aif, save them in some convenient location.
Replace the two sound files *"move to trash"* and *"drag to trash"* inside the Finder and Dock folders, respectively, inside the SystemSounds folder, with the one you want for putting things in the trash and the *"empty trash*" one inside the Finder folder with the new one for emptying the trash.
Ensure that you rename the new ones the same as the originals. (I usually copy the originals and add a .bak suffix so I can restore the sounds to their original condition.)
OPTION-click the Finder's Dock icon and select Relaunch.
Do note that if you'll have to authenticate to copy, rename, and replace these files. I use the Terminal with the sudo command to affect the changes.

Where are the epson drivers for Mavericks for the artisan 835

Where are the epson drivers for Mavericks for the artisan 835

OMT8 wrote:
Well, I have this printer too, and I get the following response from the System Prefs Printers and Scanners when I select to add this printer:
"The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software."
When you go to the Epson website for this particular printer it says:
"The latest drivers for this product are available only via Apple's Software Update."
And finally, when you go to Software Update it says: "No updates available"
I second OMT8.
Yes, the driver file at http://support.apple.com/kb/DL1398 allowed me to finally install my printer, but does Apple have _any idea_ how long it takes to download a 1.08GB file over a 1.5mbps DSL connection?
Never mind how much of my pricey new SSD is being consumed by the resulting 1.80GB of driver files all for _one_ printer driver that should maybe occupy 200K?
Or that the primary article on OS X printer drivers (http://support.apple.com/kb/HT3669) -- which does indicate that the Artisan 830 is supported -- does not mention or link to the driver file that's needed to make it work?
Or what a complete violation of Apple's "it just works" gestalt it is to be confronted with the above Catch-22 and to have to search the web and then go through all of the above to make a new laptop talk to a two-year-old printer?
Yes, my printer now works, and yes, Apple's Support Communities were instrumental in getting to this point. But spending all morning (plus download time) getting a printer driver installed tastes way too much like I paid for Apple and got Microsquish.
-carl-

HP Officejet Pro 8600 Wireless - Where are the printing shortcuts?????

HP Officejet Pro 8600 Wireless Printer
Windows 7
Where are the printing shortcuts?????
I just replaced a canon printer that died that had the concept of PROFILES, so that I could setup a PROFILE for each type of printing, i.e. 4X6 photos/documents/5X7 photos. So it was easy for our family to print, they would pick each setting.
Now with latest driver for 8600 there are NO way to save a set of settings for a printer. I have seen some old discussions on this but I just can't believe HP doesn't have this type of functionality in their drivers. I don't need the ePrint and all the other bogus stuff installed with the 8600 driver, but I DO NEED the ability to save different sets of printing options so I don't have to remember, borderless or not, landscape or not, etc and keep wasting photo paper/ink/regular paper with incorrect options.
Here is another posting with similar points -> Customers are NOT getting full print functionality. We don't care about the extra software, it is minimal. Full functionality includes the ability to create profiles for different printing situations so that the user can easily choose that profile (and therefore all the myriad settings for that profile). What HP has done is give us ONE profile, essentially, and every time you want to do something different, you have to change that ONE profile. How is that helping?
As I said, if I want to switch from a normal printing job (e-mail, web page, etc.) which uses my ONE setting, and then want to print a 4x6 photo, I have to remember to change at least 6 different settings. With the shortcut, I would select my "borderless photo" shortcut, and it would automatically switch paper trays, size, color, quality, you name it. Now you force me to change that each and every time.
If someone can explain why this is considered full functionality I would be extremely grateful.

Hello,
I am sorry you are having trouble with your print experience.
I am going to make some assumptions here, which could be wrong in your case, but might help others. Since you mention printing from Windows7 and ePrint in the same thread, can I assume you are trying to print using the HP ePrint driver for windows (www.hp.com/go/eprintsoftware) ? The ePrint driver also comes preinstalled on all HP laptops and pcs now, so maybe you made a recent pc purchase and therefore have the ePrint driver installed?
The goal of the ePrint windows driver currently has a lot less to do with providing the hundreds of print features and settings that the full featured, product specific print drivers provide. The goal is to enable customers to be able to print to any recent or new HP printer through a number of different connection paths from a single installed print driver / print queue. Once the ePrint driver is installed, printing with that driver will dynamically find direct network printers, cloud enabled printers, public print locations, direct wireless printers, etc., and create the correct print format depending on the print path taken. If the printer is ePrint cloud enabled and has a good internet connection, the printer and the pc do not have to be in the same location. For example, you can print from home to your printer at work. You can send photos of the kids to your mom's printer in another state, etc. The ePrint solution is also good for the traveling worker who just wants to send the occasional print job to the nearest network or wireless direct printer without having to find and install another print driver for each new printer. One driver, one queue and you can print to any recent or new HP printer.
The ePrint driver has a few important print settings that customers may want to use (copies, duplex, grayscale, etc). More may be added over time depending on demand.
BTW, because the ePrint driver does not have a ton of print settings to handle, the rendering of print jobs is as simple and efficient as possible and should not bog down your pc.
If you want all the bells and whistles in the print driver experience and just want to print to a single printer you can download and install the product specific print driver from hp.com
I hope that helps out a few people who may be wondering what the purpose of ePrint is!!
Good luck.
I am an HP employee, but these are my own thoughts and suggestions

What are the key points to beconsider while upgrading from 4.7 to ECC 6.0

hai
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
please provide sufficient material
points will be rewarded
regards
v.sridhar

Hi Sridhar,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Please also Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Do Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Where are the forum points gone?

Similar Messages

Maybe you are looking for