Where are the headphone jacks on an Envy 700-056

where are the headphone jacks on an Envy 700-056?
This question was solved.
View Solution.

Microphone, headphone, and USB ports can be found on top of the computer facing to the rear.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

Where is the headphone jack on my ipad 3, where is the headphone jack on my ipad 3

where is the headphone jack on my ipad3???????? please tell me someone

your right all it needed was a firm push... cuz i was trying to push it in there and it was not going in and i was scared itll break something on it. thanks again

After installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.

after installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.

Have you gone into system prefs nad made sure that the headphone port is set to audio out. And not audio in.
Also make sure that you are selecting built in speakers for your audio output.
If that does not fix it try doing a Pram reset.
Shut your mac down.
Press the startup button.
Hold down the following keys. Command Option P and R. Wait till you hear the chime 2 times. Then let go. See if that fixes it.

Where can I send my phone to get the headphone jack repaired?

Yesterday, I accidentally got the tip of my headphones stuck inside the headphone jack of my iPhone 5s. I know that other people have had this problem and looked up various tutorials on how to get it out. I used superglue for all of them and now I am afraid I may have superglued the headphone jack in place. This needs to repaired because my phone is stuck on headphone mode so I can't hear music, alarms, calls, texts, etc. when they come in.
Where can I send my phone to be repaired? Should I do it by mail or take it to the Genius bar at apple? Also, what kind of insurance could cover it, and how much does it cost? Thanks

You can visit an Apple Store next to your place, but you might think about making an appointment before you visit to avoid long waiting times in front of the Genuis Bar.
You can also arrange the service by contacting Apple Support:
iPhone - Contact Support - Apple Support
Supergluing the headphone jack is not covered by Apple's warranty, you might have to pay the service fee to get the phone replaced by another device.
Out-of-warranty repair service
If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
Read Apple’s Repair Terms and Conditions
Model
Out-of-warranty service fee
Battery service*
iPhone 6 Plus
$329
$79
*available only if battery
fails Apple’s diagnostic test
iPhone 6
$299
iPhone 5s, iPhone 5c, iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS, iPhone 3G,
Original iPhone
$149
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
copied from Apple - Support - Service Answer Center

My headphones are not recognized by the headphone jack.

This is an extremely chronic problem that I am getting very furstrated with and I would like it to be resolved soon.
Problem:
My speakers work perfectly fine, the problem is when my headphones are plugged in.
What happens when I plug my headphones in:
No sound comes out of them.
The little speaker icon on the top of the screen next to the battery charge and the internet signal turns grey.
When I press the volume buttons (F11 and F12), the speaker icon comes up on the screen, but the volume does not change and there is a small circle icon with a side slash through it.
In system /preferences/sound it doesn't say headphones, but it says digital out.
I have tried to resolve the issue multiple times by calling AppleCare and going into the Genius Bar.
PLEASE SOMEONE HELP ME. I WILL BE ETERNALLY INDEBTED TO YOU.
This is what has been done:
First time: The Genius plugged his headphones into the computer and it miraculously started working, then it stopped working when I got home.
Second time: A new logic board was put in the computer, three weeks later it stopped working.
I called AppleCare yesterday, the technician had me delete two files that started with com.apple... then reset the PRAM, it worked for half an hour, then it stopped.
I called AppleCare again today, but I was told to just plug the headphones in and out to toggle the switch in the headphone jack. It didn't do anything. Also, what is the purpose of that switch in the headphone jack?
The only time I have seen that red light being emitted was when it stopped working after the new logic board was installed. A red light was emitted from the jack when the headphones were removed for about an hour. Then it started working for 20 minutes, then it stopped, and no red light was being emitted anymore.

Try restart your iPhone before connecting. It can solve many problems.

TS1630 My iPhone 4 says the headphones are in when they are not. I am not getting any sound from the speaker. Nothing appears to be in the headphone jack. Any ideas anyone?

My iPhone 4S has no sound through the speaker generally, although the speakerphone does work. It is indicating that headphones are in, when they are not. Nothing appears to be in the headphone jack. Resetting the phone has not resolved the problem. any ideas what could be wrong?

This just happened to my brand new iPhone5. I tried turning all the way off and then on AND plugging and unplugging. Only to discover that simply connecting to the charger worked!!!
Very frustrating though!!

My sound is coming from my built in speakers instead of through the headphone jack.

I have an Envy 15 1270ca and last night it froze while I was listening to music, forcing me to manually shut it off by holding down the power button. When the computer came back on, my sound was coming out of my built-in speakers instead of my external speakers through the headphone jack. I checked the speakers through my mp3 player, so I know that they are working, so it seems to be the jack which is not working.
Any help is appreciated!
This question was solved.
View Solution.

Please Reinstall the sound Drivers and Make sure that the no ear phones are plugged in when we reinstall the sound drivers, this should work even after doing this if its not working then please set the BIOS to defaults this should work
I am an HP employee

Where are the Dual Microphones on 15" MacBook Pro Retina Late 2013?

I have just bought a 15inch macbook pro retina late 2013. on the site it mentiones that on the side there are dual microphones but no matter how hard and close i look at the side where the two thunderbolts, headphone jack, USB and Magsafe are i can not see them!!!
any one else have this issue, have i missed something???? have apple decided to cover these two little holes?

There might be some confusion about the dual array microphone:
http://www.gottabemobile.com/2013/12/03/13-inch-macbook-pro-retina-review-late-2 013/
"For video chats Apple includes a dual array microphone, with both microphones sitting on the left side of the notebook."
That's those two tiny black dots on the left side. Must be some kind of phased array to track multiple people talking like for FaceBook.
However there is a stereo microphone input:
http://www.cnet.com/how-to/record-through-your-macbooks-headphone-jack/
It's actually the headphone jack, which is stereo and can be flipped as a stereo input (didn't know that).
Also:
http://makebeats101.com/best-audio-interface-home-recording-focusrite-scarlett-2 i2-review/
For multiple sources.

My Macbook Pro speakers aren't working and the headphone jack is emitting a red light when I try to play something with sound. HELP!

The question says it all. It worked perfectly last night and stopped working this morning. A whole day has gone by and the speakers still don't work. I've plugged in headphones and that works.
When I try to increase volume or decrease volume, it shows me the mute sign which makes no sense at all. When I try to unmute, it stays muted.
HELP I'M ON THE VERGE OF BREAKING THIS P.O.S. LAPTOP

SO I just now had the same problem. A million threads online suggested to try inserting headphones, toothpicks, or even qtips to try and switch the "switch" inside the headphone jack. Everyone had great results from using the toothpick method. Well that didn't work for me. here's what FINALLY WORKED!!--> I wrapped a toothpick in fashion tape (fashion tape is basically stretchy double sided tape. If you don't have any ask some girls and someone will have). My thought was that maybe this "switch" didn't need to be flicked or pushed like a button. Maybe it was stuck in like a button that has been pushed in. I used the sticky toothpick to pull up the button/switch. Basically, take the toothpick and pressdown on the switch (supposedly the botton is inside the jack at the 6 or 7-0clock position) and then press the toothpick away (so that you are pushing in the opposite direction [1-oclock]). do this multiple times so you're flicking the toothpick back and forth. Just make sure you press firmly enough in the 6-oclock position so the tape can get stuck to the button.
Two tips for this method:
1) I had tried a manicure q-tip first, which in hindsight could've cleaned out the headphone jack, facilitating a surface that can get stuck to the fashion tape effectively.
2) You can see in the photo attached that I wrapped the tape on the toothpick a little past the edge so that there was extra tape on the end of the toothpick. That was (and this is just my theory) to make up for the fact that toothpicks have a tapered end. I figured that having this extra loose bit of tape at the end would allow me to reacch into any nook or crany of the headphone jack where this mysterious "button" might be lurking.

Where are the USB ports

Where are the USB ports
This question was solved.
View Solution.

Hi Moth!
I am only in my 69th year but I also find groping about behind PCs with the spiders a PITA!
So, buy a USB hub. I have several. One of the best is called "Masterplug" it clamps on the back of your desk and has 4 USB ports, a 13A power socket, RJ45, RJ11 and headphone jack on the front. Bad news is I can't find another one!
However, some kit won't work on hubs so buy some 1mtr USB extension leads, buy the best quality you can. Plug those in and bring them out to the front of the machine.
Dave (an inveterate tinkerer)

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
Thank you,
Chris

Michael,
Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
Best regards,
David

How can I use the headphone jack as an audio input?

I have a new macbook pro 13". I want to use the headphone jack as an audio in device, but I do not have the option in sound preferences to choose it as an option for audio in.
HELP!!
Thanks.

alex_on_beats wrote:
…Anyway, why?
Ask Apple - we're only users here.
Griffin iMic is the usual solution to such problems; http://store.griffintechnology.com/desktop/imic
By all means send feedback and let them know how t'd off you are; http://www.apple.com/feedback/macosx.html

The headphone jack on my iPod Touch Gen 2 is intermittent. I get sound sometimes out of one channel and sometimes both depending on how I hold the headphone jack. Is this a costly repair?

The headphone jack on my iPod Touch is intermittent. I gat sound out of one channel or both depending on how I hold the jack. It is making intermittent contact. Is this a costly repair by Apple? Can I do this repair myself?
Thanks

Here is a third-pary place. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Apple will only exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
Here are instructions for doing it yourself
iPod Touch Repair - iFixit

My headphones suddenly won't fit into the headphone jack on the 1st generation ipod touch

Has anyone had the problem where the headphones would only go about 3/4-way into the jack on the ipod touch? I tried cleaning out the jack but there's no lint or dust that I could get out with a qtip or blowing air. Any suggestions?

Could there be a tip from another set of headphones stuck in the headphone jack?
Have you tried another pair of headphones?
Does the plug look OK?

I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?

I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?

Have you tried:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
Apple will exchange your iPod for a refurbished one for this price:
Apple - Support - iPod - Repair pricing
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Where are the headphone jacks on an Envy 700-056

Similar Messages

Maybe you are looking for