Where are the high multipliers? K7N420

Hello everyone,
It's been a long time since I posted here. Mainly because it's been a long time since I screwed around with my old MSI K7N420. Well, I had upgraded the 1 ghz Duron that was in it to a 1700+ but the damn thing went belly up, the cpu that is. For no reason it just decided one day when my boy turned it on to not turn on. Diagnosis, one dead Athlon XP 1700+ tbred B.
So I decided to look around for another processor. A friend of mine had an extra 2100+ tbred B AHIUB week 02 of 2003. I thought, hey I'll slap that dude in there and change the multiplier to 14 or so and have a pretty decent box. Well, it did not work out so nice. I have the 2.7 bios and it does work with the 2100+ but only at default settings. There are no multipliers in the cmos higher than 12.5 even though the board does seem to run fine at 13x. I guess the higher multipliers work but are not listed in the selectable range. What a screw up this board is. Now I know why I switched over to Epox. That board is 100% flexible.

Well, as you know if you have been following this thread. I tried flashing to 2.8 to see if it would lower cpu temps and it did not. What 2.8 did do was cause lockups. It would lockup after a few minutes no matter where I was. It did it just sitting in windows and even in bios. After this I'd have to clear the cmos to get it to boot up again. So I flashed back to 2.7. Let me tell you, I was sweating it as I was thinking it would lockup while flashing. Thank God it did not. So no more lockups but now I have a different problem. Well, maybe not a problem, more of an oddity. The damn thing now boots up as soon as I apply power to it. Kind of like I had the option in bios to return to an on state when power is reapplied. But there is no option for that. I tried all relevent options in bios. It's not my power switch stuck on cause it does it with the switch unplugged. I tried another power supply. Still does it so it's the K7N420 that is doing it.
Anybody seen this?

Similar Messages

Where are the .joboptions stored on a Mac for InDesign CC?

Where are the .joboptions stored on a Mac for InDesign CC?
I put them in the usual directory:      /Library/Application Support/Adobe/Adobe PDF/Settings   . . . but they are not seen by InDesign CC.
. . . Photoshop, Illustrator, Distiller and Acrobat are seeing my custom profiles and any default profiles I removed are not there for those apps.
Even older versions of all these apps and InDesign 6 and 5 see my custom profiles.
But InDesign CC only shows the ones shown in the screen shot below: (High Quality, the PDF/X versions[3], Press and Smallest size)
I know I can probably do a "Load" profile, but that's not the point and I need to remove the default profiles.
I'm in a multiple user environment and need to lock down the use of profiles to our companies select few.
Did a thorough search of the entire Mac and PDF/X- does not even show up.   Any suggestions?     Anyone?    I'm scratchin' my head at this point.

This was the correct answer:
   Laubender   Jun 2, 2014 12:18 AM (in response to Maurice Castelbuono)
@Maurizio – the standard settings, the joboption files with the brackets like [PDF/X-1a:2001] are stored inside the inDesign app for InDesign CC 9.2.1.
The path for these would be:
/Applications/Adobe InDesign CC.app/Contents/MacOS/Resources/Adobe PDF/settings/mul
or with a Japanese version of InDesign:
/Applications/Adobe InDesign CC.app/Contents/MacOS/Resources/Adobe PDF/settings/japan
If you do a right-click on the InDesign app you can show them with "Show Package Contents" options.
All other PDF joboptions that you are creating are relative to your current User Library. They are stored in:
~/Library/Application Support/Adobe/Adobe PDF/Settings
Where the tilde sign at the beginning indicates the home of the currently used user.
You can access ~/Library, if you press the alt key when accessing the "Go To" menu in the Finder. Otherwise it's invisible.
Uwe

Authoring Tool - Where are the updated MPs for the Library After Applying Update Roll Ups

All,
Fairly recently, I took a client to SCSM 2012 R2 UR3. Today I dropped by to do some work for them on custom MPs, and when I attempted to open them with the SCSM 2012 R2 Authoring tool, I could not, because the 7.5.3079.148 MPs (UR3 version) are not in the
library. I have searched high and low to locate these MP files to drop them into the library, but I am coming up empty handed. Where are the .MP files? I am aware that we can just directly alter the referenced MP version number in the MP itself, but I want
to know where do we actually find these correctly versioned files for the authoring tool.
Thanks,
Z

Hey Everyone,
I have heard back a few times from MS, but with nothing substantially helpful other than they created a bug for it. Today they called again and said this is listed with a low priority, because not enough people are complaining about it, which has a several-months
time frame for resolution. He asked me to submit Connect Feedback and get people to Upvote it and state that they can reproduce the problem. So, I went out there, found one connect request already submitted (By Thomas Bianco above) and attached to the bug,
and I Upvoted and clicked the Repros link on it. Here is the link below, so please get out there and and Upvote and click the Repros link.
https://connect.microsoft.com/WindowsServer/Feedback/Details/948751
Thanks!
Z

Where are the plugins installed in photoshop adobe official website

where are the plugins installed in photoshop adobe official website

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Where are the division, multiplication and subtractions on mac keyboard?

trying to do an microsoft excel tutorial on mac - where are the divide, subtract and multiply figures on the keyboard?

Use the -, *, and / keystrokes.
(123043)

PowerPoint parsing into Captivate 8 issues - where are the Adobe personnel to get this right?

In Captivate 5.5 I can import PowerPoint slides without any problems, BUT in Captivate 8 the parsing is TERRIBLE (even in high fidelity) leaving me with this result:
I have checked the size of the PP page vs the size of the Captivate software simulation video. I have imported it into an existing capture, I have started a new PowerPoint project and I have imported it into a new Blank project. Nothing works! The parsing is still terrible.
I have now read a number of Forum posts about problems with importing PP into Captivate 8 - NONE of which had answers.
So my real question here is: where are the actual Adobe staff members to answer this question and FIX THE PROBLEM! I have a contract to make videos for a company and I will lose my contract if I cannot produce good quality work.
This is NOT GOOD ENOUGH!!!!

Lilybiri
You are a star! Thank you so much for the link.... I will certainly write to them.
And hopefully someone from Adobe management will see this and consider actually paying some of the generous users who contribute so much to this Forum, at least a stipend... Especially as Adobe is being paid good money for the software.
The response that I had to problems with Articulate Storyline is outstandingly good. Yes, they do have a general forum which is quite helpful but when I need specific help, their support is excellent. Eg. At about 1am on New Year's day I had a query about transferring my program from one computer to another. Thinking I would only get an answer a few days later I was really surprised when five minutes later I received an email telling me exactly what to do and inviting me to online chat if I still had a hassle.
I also belong to other Forums for various paid-for software that I use and although many of the people who answer in the space are just fellow users, their super-users (who are always around) are actual developers and are paid by the software provider to help the people who have bought their software.
So why can't the mammoth Adobe do the same?
Cheers
Ann

Where are the drivers for HP LaserJet 5P for Windows 8.1 (64bit)?

Had been using HP LaserJet 5p printer with HP LaserJet 5p printer driver, but had printer disconnect for a few months due to not have black toner. Now I want to use the printer and my control panel does not show HP Laser 5p printer for my tablet but shows it for my laptop. I can not find the driver on the HP support list and the support list does not recognize HP LaserJet 5p.
Where are the drivers for HP LaserJet 5p for windows 8.1 (64bit)??????

Hi,
Basic print drivers are available for the HP Laerjet 5P via Windows Update.
Follow these steps to install the printer drivers on Windows 8.1:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03470332#N100AA
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hi there, I pay for extra iCloud space online. However I cannot seem to find any of my photos or account? As my iPod/iPhone only hold 1000 pictures, where are the previous pictures? And how can I access them?

Hi there, I pay for extra iCloud space online. However I cannot seem to find any of my photos or account? As my iPod/iPhone only hold 1000 pictures, where are the previous pictures? And how can I access them?

You cannot use iCloud Storage to suppliment your iPad. They are mainly used to backup iPad.
Free up space on iPad
Settings>General>Usage>Storage>Delete what is not needed to free up space on iPad.

Where are the drivers?

Alright it's probably a stupid question but I just bought a new mac that came with leopard.I used boot camp to partition and install windows vista on my new mac. Everything worked fine until I had to install the drivers.I don't know where the drivers are. They supposed to be in the leopard dvd that i don't have. Where are the drivers?

Hi Obe7,
the Mac OSX install disc that you used to install Leopard on your Mac is a 'hybrid'-disc, which contains an OSX part (only visible while in OSX) and a Windows part (only visible while in Windows).
The BootCamp 2.0 drivers are on the Windows part of that disc.
While in Windows insert that disc and usually the driver installation starts automatically.
If not, use the Windows Explorer to navigate to the disc and start the 'setup.exe' file manually.
Stefan

Where are the older BIOS versions gone?

Hi
A few weeks back, I've upgraded the BIOS on my Pavilion G6 1001sq to the latest version (F66). I noticed that the laptop is running considearbly hotter since then and I want to revert to an older BIOS version. When I go to the updates page on the HP website and click on "older versions available" I can only see the F66 version on the page I'm directed to ( http://h10025.www1.hp.com/ewfrf/wc/previousVersions?softwareitem=ob-115746-1&cc=us&dlc=en&lc=en&os=4... ), although a long list with many versions was available till recently. Where are the older versions gone?

Unfortunately, I do not know where they have gone. HP is working on issues with the suport and driver servers at the moment.
Since your notebook does have the UEFI Diagnostics installed, you should be able to rollback to the previous version that was installed. Use the firmware management option to do that.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Where are the print drivers found?

I have a Brother HL 2040 laser printer. THe Brother website has a version 2.2 driver for this printer. I downloaded and installed. When I add the printer I keep getting version 1.4 driver.
Can someone tell me where are the drivers found on my iMac?
Also I am trying to get this to print via a Linksys wireless print server. Do I use the ip address for the print server or the printer when adding this.
I tried using the print server IP but I get a "printer paused" issue. I think I need the new print driver.
thanks in advance for any help.

I have not gotten the driver to update to the newest version. I deleted the Brother Folders as mentioned in the replies, no joy. No matter what I do it ends up 1.4 not 2.0.
Version 1.4 worked OK for a USB connection, so I went forward with trying to get the network connection going. By trying every combination available I got it to work.
What HP jetdesk-socket has to do with my printer...escapes me. But that combination with version 1.4 driver works.
I will leave well enough alone.
I have 2 other computer to update to SL.....maybe.

Where are the epson drivers for Mavericks for the artisan 835

Where are the epson drivers for Mavericks for the artisan 835

OMT8 wrote:
Well, I have this printer too, and I get the following response from the System Prefs Printers and Scanners when I select to add this printer:
"The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software."
When you go to the Epson website for this particular printer it says:
"The latest drivers for this product are available only via Apple's Software Update."
And finally, when you go to Software Update it says: "No updates available"
I second OMT8.
Yes, the driver file at http://support.apple.com/kb/DL1398 allowed me to finally install my printer, but does Apple have _any idea_ how long it takes to download a 1.08GB file over a 1.5mbps DSL connection?
Never mind how much of my pricey new SSD is being consumed by the resulting 1.80GB of driver files all for _one_ printer driver that should maybe occupy 200K?
Or that the primary article on OS X printer drivers (http://support.apple.com/kb/HT3669) -- which does indicate that the Artisan 830 is supported -- does not mention or link to the driver file that's needed to make it work?
Or what a complete violation of Apple's "it just works" gestalt it is to be confronted with the above Catch-22 and to have to search the web and then go through all of the above to make a new laptop talk to a two-year-old printer?
Yes, my printer now works, and yes, Apple's Support Communities were instrumental in getting to this point. But spending all morning (plus download time) getting a printer driver installed tastes way too much like I paid for Apple and got Microsquish.
-carl-

HP Officejet Pro 8600 Wireless - Where are the printing shortcuts?????

HP Officejet Pro 8600 Wireless Printer
Windows 7
Where are the printing shortcuts?????
I just replaced a canon printer that died that had the concept of PROFILES, so that I could setup a PROFILE for each type of printing, i.e. 4X6 photos/documents/5X7 photos. So it was easy for our family to print, they would pick each setting.
Now with latest driver for 8600 there are NO way to save a set of settings for a printer. I have seen some old discussions on this but I just can't believe HP doesn't have this type of functionality in their drivers. I don't need the ePrint and all the other bogus stuff installed with the 8600 driver, but I DO NEED the ability to save different sets of printing options so I don't have to remember, borderless or not, landscape or not, etc and keep wasting photo paper/ink/regular paper with incorrect options.
Here is another posting with similar points -> Customers are NOT getting full print functionality. We don't care about the extra software, it is minimal. Full functionality includes the ability to create profiles for different printing situations so that the user can easily choose that profile (and therefore all the myriad settings for that profile). What HP has done is give us ONE profile, essentially, and every time you want to do something different, you have to change that ONE profile. How is that helping?
As I said, if I want to switch from a normal printing job (e-mail, web page, etc.) which uses my ONE setting, and then want to print a 4x6 photo, I have to remember to change at least 6 different settings. With the shortcut, I would select my "borderless photo" shortcut, and it would automatically switch paper trays, size, color, quality, you name it. Now you force me to change that each and every time.
If someone can explain why this is considered full functionality I would be extremely grateful.

Hello,
I am sorry you are having trouble with your print experience.
I am going to make some assumptions here, which could be wrong in your case, but might help others. Since you mention printing from Windows7 and ePrint in the same thread, can I assume you are trying to print using the HP ePrint driver for windows (www.hp.com/go/eprintsoftware) ? The ePrint driver also comes preinstalled on all HP laptops and pcs now, so maybe you made a recent pc purchase and therefore have the ePrint driver installed?
The goal of the ePrint windows driver currently has a lot less to do with providing the hundreds of print features and settings that the full featured, product specific print drivers provide. The goal is to enable customers to be able to print to any recent or new HP printer through a number of different connection paths from a single installed print driver / print queue. Once the ePrint driver is installed, printing with that driver will dynamically find direct network printers, cloud enabled printers, public print locations, direct wireless printers, etc., and create the correct print format depending on the print path taken. If the printer is ePrint cloud enabled and has a good internet connection, the printer and the pc do not have to be in the same location. For example, you can print from home to your printer at work. You can send photos of the kids to your mom's printer in another state, etc. The ePrint solution is also good for the traveling worker who just wants to send the occasional print job to the nearest network or wireless direct printer without having to find and install another print driver for each new printer. One driver, one queue and you can print to any recent or new HP printer.
The ePrint driver has a few important print settings that customers may want to use (copies, duplex, grayscale, etc). More may be added over time depending on demand.
BTW, because the ePrint driver does not have a ton of print settings to handle, the rendering of print jobs is as simple and efficient as possible and should not bog down your pc.
If you want all the bells and whistles in the print driver experience and just want to print to a single printer you can download and install the product specific print driver from hp.com
I hope that helps out a few people who may be wondering what the purpose of ePrint is!!
Good luck.
I am an HP employee, but these are my own thoughts and suggestions

Where are the plus and minus keys on a Pavilion dv6-3150us Entertainment Notebook?

Where are the plus and minus keys on a Pavilion dv6-3150us Entertainment Notebook? Joe
Joe B.

Its on the keyboard somewhere on top center close to the number keys. To be straight, its just below F12 key.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Old mac wont boot xcpt via firewire, want to move iphoto files from old to new, where are the pics stored?

old mac wont boot xcpt via firewire, want to move iphoto files from old to new, where are the pics stored?

Photos are stored in your home folder (~pictures).
Barry

Where are the high multipliers? K7N420

Similar Messages

Maybe you are looking for