WHERE ARE THE INSTRUCTIONS FOR THE FUNCTIONS ON THE NANO PLUS?
You know this is a nice device, but there is no instruction manual explaining the 40 plus functions of this device, AND TO MAKE MATTERS WORSE THERE IS NO TUTORIAL ON THIS SITE , FOR THE NANO PLUS, GOTO THE NANOPLUS PAGE, HIT TUTORIAL OR HOW TO AND YOU GET A MANUAL FOR THE 20 GIG BIG SCREEN UNIT, THANKS FOR NOTHING!!!!!!!!!!!!!!
?NOW TRY TO GET TO CUSTOMER SERVICE AND SEE HOW HARD IT IS TO ENTER YOUR PRODUCT INFO ON THE DROP DOWN, NO PHONE CALLS, NO EMAILS AND NO ONE TO EXPLAIN WHAT THE GAZILLION FUNCTONS ARE ON THIS DEVICE, YOU KNOW ONE WOULD HAVE A HARD TIME REFERING SUCH A PRODUCT TO A FRIEND, WHEN THE COMPANY SEEMS SO SECRETIVE ABOUT A SIMPLE INSTRUCTION MANUAL!!!!!!!!!!!!!!!!
Thanks but uhm I am using the msntv2 and after the mp3 drop down, then the Zen drop down, THERE IS A BLANK DROP DOWN WHICH CANNOT BE FILLED IN WITH THE PRODUCT #(FL008)
you know it would be alot simpler to make the info simpler to get since there is no TANGIBLE paper instruction manual provided with this product to explain all of the many functions that come up on the screen!!!!!!!!!!!!!!!!!!!
?but if someone can tell me how I can access the manual on this or any other site, I wont have to junk
this complicated gizmo and get an Ipod
Similar Messages
-
Where are the instructions for 10.0.2? I am lost
Where are the instructions for the new Garageband10.0.2 version? I am lost & frustrated.
Hi,
Check Out He has a pdf Quickstart guide to GarageBand V 10
OSX (very helpful with Transition (imo)
Below=
http://thegaragebandguide.com
http://thegaragebandguide.com/resources
http://thegaragebandguide.com/osx
*** Below also
This Man is also on You Tube as well (below) and Apple Communities = Hangtime (he is Really Smart ! )
http://www.bulletsandbones.com/GB/GBFAQ.html
http://www.bulletsandbones.com/GB/GarageBand.html
Version 10GB
http://www.bulletsandbones.com/GB/GBFAQ.html
http://www.bulletsandbones.com/GB/PluginsAUEffectsGBv10.html
Best
diamondblues been laid up for awhile due to several surgeries
ready to go now (I hope * )
aka
David -
The instructions for authorizing my computer are incorrect. It says to go to "Store" and then "authorize" is supposed to drop down, but it doesn't. Help!
There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them: -
Thank you! This may sound lame but are these instructions for my blackberry? I'm receiving iCloud emails without problems on my MacBook Pro and I'd rather not mess w/ settings there. Thanks again!
You don't need to start a new thread to continue a conversation, you can just tack onto the original one. The settings I referred you to are for the Blackberry, since that's the device which is not receiving mail: anything which is working can be left alone.
-
Living in Dubai where many apps are blocked. How can I get around ? Tried to create a new Id but my billing address in Dubai will not match the criteria for an account in the US. Help please to get around the censorship...thanks
The censorship in regards to certain apps not being available in your country is by your country, not by Apple.
Due to various laws and licensing in each country, in order to have an iTunes store account in a particular country you must have a credit card with a billing address in that country. If this were up to Apple, there would be no such requirement and there would be only one iTunes store for the entire world, but various laws, regulations, and licensing issues in each country, this is required by Apple. -
HT204350 The instructions for "Migrating using FireWire or ThunderBolt" are WRONG
The instructions for "Migrating using FireWire or ThunderBolt" in this article are wrong for a transfer from a Mountain Lion Mac to a Mavericks Mac. You should not put the source Mac in target disk mode. Rather, you should start up Migration Assistant on the source Mac and choose "To another Mac"
Apple doesn’t routinely monitor the discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback -
The screen displayed on the instructions for home sharing described as being found on the left side of iTunes isn't visible on the new iTunes page?? Where do i find that screen i.e., how do I fine the home sharing icon on the new iTunes page?
ontthe top menu
View > Show sidebar
Then the computers for home sharing show up under the Shared section -
Error in the instructions for performing a silent install
There's an error in the instructions for performing a silent install of Photoshop Elements:
http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s-1.html
In step 9, the instructions say to use the following command line:
start /wait "path to Setup.exe" /UL%LangCode% /V“SERIALNUMBER=%AOO volume license serial number%"
The correct command line, however, is this:
start /wait "path to Setup.exe" /UL%LangCode% /V"SERIALNUMBER=%AOO volume license serial number%"
See the difference? Look closely at the character after the /V. In the instructions on the website, they put in a "curly quote" character. This obviously needs to be a straight quote.
Interestingly enough, the erroneous command line from the web site will actually work just fine as posted if all you are passing in the /V is the serial number. If, however, you wanted to add a "NODESKTOPICON=1" to disable the creation of a desktop shortcut, for example:
start /wait "path to Setup.exe" /UL%LangCode% /V“SERIALNUMBER=%AOO volume license serial number% NODESKTOPICON=1"
then it fails to run silently.
I post this in the hopes that Adobe will fix the typo in their instructions and save other admins the hours of grief I've been put through today trying to get this working.Check the response file where you define the SGA memory size for the new database.
You can also choose not to create the database at the installation and do it afterwards, making a specific response file for it. (I'd recommend specially this option. like that you can separate possible installation errors with the ones on the DB creation process).
Good luck.
Regards,
Enric Moya -
I follow the instructions of swiping up from the bottom for the control panel, but nothing appears. What am I doing wrong or what do I need to be turned on or off?
"If you're on your home screen, where your apps and folders are, you can't."
I can on mine.
For anyone having this issue, take your device out of the case and try it naked before trying a reset, restore or Genius Bar appointment. -
While downloading an album in from the Store, one song was interrupted. I have followed the instructions from apple about resuming the download, but every time I do so the same error message appears saying the download was interrupted. I am having no connection problems, have rebooted my computer, downloaded the lates version of iTunes, etc., yet nothing changes. Has anyone else experienced this, and are there any workarounds. Sadly the problem hit on one of the best songs of the album.
I had the same problem so (assuming under the Purchased items in the Store you have a song stuck at 'Downloading'):
I went to Music, then Artists.
From there I chose the album.
The song that failed to download had the cloud symbol next to it.
I clicked the cloud symbol and the song completed the download for me.
(Please note this was in iTunes for Windows - I expect it to be similar in iTunes for Apple)
Message was edited by: UbergeekRFC - parenthetical note added
Message was edited by: UbergeekRFC - added note about song stuck as downloading -
Instructions for Downloading and Activating the JCOP Tools
In response to my question:
I refer to JCOP Tools available on Eclipse.
If the plug-in free for download?
If it is not, kindly provide a proper hyperlink from which those interested can place their order.Listed below is the reply from IBM. Can anyone who has successfully obtained the activation code this way confirm whether you need to foot the postage?
Cheers!!!!
There is no charge for the JCOP Tools. The tools are provided as-is with no warranty or support. Instructions for downloading and activating the tools follow.
Please note that because our Java Card operating system is now available for more than one silicon vendor, IBM will no longer act as a distributor for sample cards. If you require a sample card, you must now approach the silicon vendors directly . Our current silicon partners are Philips Semiconductor, Samsung and Sharp. In addition you may be able to obtain JCOP sample cards from suppliers on this list http://www.zurich.ibm.com/jcop/order/cards.html
JCOP Tools are subject to US Government Export Controls, and therefore each install has to be activated individually to ensure compliance. Please follow the instructions below for each copy of the tools that need to be activated.
Prerequisites:
1. If you do not already have a Java Runtime Environment (JRE) installed, download and install a JRE or JDK. You can do so from this website (http://java.sun.com/j2se/1.4.2/download.html). Please note that we recommend the use of JRE version 1.4.2.
2. If you do not already have the open source software development environment Eclipse installed, download and install Eclipse (http://www.eclipse.org/), You can do so from this website(http://www.eclipse.org/downloads/index.php). JCOP Tools require Eclipse 3.1
To download the tools and start install:
1. Download the current Update Site image from here (http://www.zurich.ibm.com/jcop/download/eclipse/image/tools.zip)
2. Unzip the downloaded file to a location of your choice
3. Start the Eclipse IDE
4. From the menu bar click on Help > Software Updates > Find and Install
5. In the Install/Update Dialog select Search for new features to install
6. Click Next
7. Click on New Archived Site . . . and browse to the location chosen in step 2
8. Select the file tools.zip
9. Click Open then OK then Finish
10. Eclipse Update Manager will start to install the plug-in, continue with the install as needed.
For an activation code please send me ([email protected]) the following information:
1. Your full postal address - the serial number will be sent via International Courier for US Export control reasons.
2. Your contact telephone number
3. The serial number of your JCOP tools install
4. Your planned usage/reason for needing the JCOP tools
5. If a student, a copy (fax or digital photo) of your student ID
For the serial number (item 3 above):
1. Ensure you have downloaded and installed the JCOP Tools
2. Start the Eclipse IDE
3. From the menu bar click on File > New > Project
4. In the New Project Dialog expand the Java Card folder
5. Select Java Card Project
6. Click Next
7. You should now see the JCOP Licensing Wizard
8. Click Next
9. Select Verify an Activation Code
10. Click Next
11. The Serial Number should appear on the next page, above the Activation Code entry fields.
12. Once you have that number click on Cancel then Abort (Note: the Java Card project choice will be disabled until the next time you restart Eclipse)For those who are interested to use the JCOP simulator for a start, I have checked that the plug-in and feature files (in tools.zip) for Eclipse are still available at IBM site, please download and install yourself.
I still keep a copy of user guide for JCOP tools (version 3.1.1a) and the contents are still relevant to Version 3.1.1b simulator in tools.zip.
If you are interested to have a copy of such document, kindly drop me an email to [email protected] -
Where are my Web Form entries stored in the webBasics plan?
Where are my Web Form entries stored in the webBasics plan? Currently—in my trial site—I can access Web Form responses through a Custom Report. Will this option be available to me in the webBasics plan?
My hope is to use the webBasics plan with a Web Form (and a few custom fields) and have the reponses stored for me in the Businsess Catalyst interface.You do not get the CRM element of BC with the webbasic plan. With BC storing the forms it creates "cases" Which are stored against the "Customer" in the "CRM". You dont have access ot that with the webbasic plan.
-
What are the tables for Partner Fuction regarding the Vendors Purchasing ?
Hello Gurus,
What are the tables for Partner Fuction regarding the Vendors Purchasing Organisation. I need the Partner Function Key, Parner Function Name, Number and the Name of the Number.
Thanx in advance,
RamonaHi Jürgen,
I know that table but it is only showing me the technical name of the Partner Function and I need also the rest: the text(name), number and the number name (text). I presume there are other tables for those infos.
I am not sure if I understand what are these. I just want the table to upload the data to BW. -
Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
Ron Bell
[email protected]Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
I do not work for Mozilla but I do have experience of releasing software for public usage.
Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
You can go back to the old version of Firefox but that won't always solve your problem.
The web site below tells you how:
https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox -
Would like to use an alarm clock. I need the alarm clock to function from the sleep mode. A review said that MAC products will not allow a program to wake up a Mac. Is this correct ? Are there any products in the Mac store what will function from the sleep mode ? How do I check this out ?
You can set times for your computer to turn on or wake from sleep in the Energy Saver system preference pane using the Schedule... button.
-
Having followed the instructions for "if you have never synced your device to itunes" and my computer displayed the message that the device has been restored, my phone is still saying its disabled and I should connect to itunes. What do I do now??
Put the iPhone into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
If that still doesn't work, as a last resort try DFU mode:
http://www.iclarified.com/entry/index.php?enid=1034
If that still fails, you'll probably need to go to an Apple Store or call Apple Support for further assistance.
Regards.
Maybe you are looking for
-
Billing in Stock Transfer between two plants of two different company codes
Hi Friends, I am doing the scenario of stock transfer between two plants of different company codes. I have some issues in Billing for this.. What are the settings do i need to to for Pricing in SD point of view. Ex: Supplying / Rece
-
Failover is work, but Session replication doesn't work!
Dear all, My Cluster can failover, but can't session replicate.... I start up the 2 WLS 6.0 and the Web Server, then I visit http://web_server_ip/myWebApp/SessionServlet serveral times, then the counter variabl
-
I 'm unable to cancel my month-to-month subscription
When trying to cancel my month-to-month plan / subscription I get an error messages staying I should try it later again. However later (1 day or 1 hour) still gives the same result. Sadly the chat with an agent is not available on the pages it is lis
-
Acrobat X pro on mac keeps crashing
each time i try to combine a pdf file, it crashes. any thoughts? driving me bonkers!
-
How can I get Adobe to take over my computer to help with lost photos?
I have lost photos going from PC to Mac in Lightroom. Have tried all the standard stuff. How do I get Adobe to log into my computer remotely to help?