Where are the left and right action buttons on the touchpad on the HP ENVY 17t Quad TouchSmart

My new HP ENVY 17t Quad TouchSmart laptop has a touchpad, but no left or right action buttons.  How do I simulate their action.  Apparently a single tap simulates a left click, but how do I get a right click?  How do I drag a cell in a spreadsheet (to copy it) using the touchpad?  I may have to end up using a mouse.
This question was solved.
View Solution.

I believe that model features a ClickPad, which doesn't have distinct left/right-click buttons but does have left/right-click areas where the buttons would normally be. See Using and Configuring the ClickPad for more info.
Please click the thumbs up button to say "Thanks!"
Clicking "Accept as Solution" on a reply that solves your problem makes it easier for other people to find solutions.
I am an HP employee.

Similar Messages

  • Left and Right Side buttons

    I just got a replacement 8330 because I dropped my previous one in a muddy puddle. I cannot remember how I originally re-programmed the left and right side buttons to run different applications than the default (camera, and voice dial). Can someone help me out?
    Solved!
    Go to Solution.

    Options > Screen/Keyboard > Left and Right Convenience keys.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Thunderbolt has 2" blank border on the left and right edges.

    When I connect my Macbook Pro 13" to my Thunderbolt display, the screen display has a 2" border on the left and right edge.  How do I size the screen to fill up the entire display?

    Hi. I had the same resolution problem as jmzmac...I turned off mirroring and my Thunderbolt display now just has the standard screen saver on it. If I click on System Preferences that window will show on the TBD and I can move my mouse across the two screens so I have an extended desktop but I really want mirroring with the correct resolution so there isn't that 2" space on either side of the screen. I tried the clamshell mode (closing the MacBook Pro, waiting a few seconds, pressing any key to wake it up) but nothing happens on the TBD. Any help would be greatly appreciated. (Running 10.6.8)

  • I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it.

    I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it. Can any one tell me what is wrong. I read where when the yellow light was flashing there was a problem, but I am a novice at this and have no idea where to turn. It seems to be backing up on a regular basis.

    On the Mac......
    Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the small window that appears
    Click the Network tab at the top of the next window
    Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
    Then.....very important
    Power off the Time Capsule and your Arris modem/router for a few minutes
    Start up the Arris first, and let it run a few minutes by itself
    Start up the Time Capsule next the same way
    Your network will now be correct, and your printing capabilities will improve.
    If Time Machine backups do not occur now, post back and we will tackle that next.

  • I would like to transfer old reel-to-reel tapes to an iMac. There are different recordings on the left and right channel of the tapes. When I connect the tape deck to the Mac, I get one recording on the left, the other on the right speaker. What to do?

    I was about to transfer some music from a reel-to-reel machione to my Mac. There are different sound recordings on the left and right channels. When I connect with RCA cables and Y-connector, I hear one recording from the left speaker, another from the right side. How do I record only one side, but hear it from both speakers?
    Detlef

    You don't say what end, or connectors are plugged into what. I'm assuming the RCA connectors are on the reel-to-reel end. Since the tape has two different mono recordings, one on each track, you of course only want one at a time during playback. Otherwise, the Mac (or any recording setup) can only treat it as a stereo recording with the standard Left-Right tracks.
    1)  There are multiple ways to connect different types of cables to get a mono signal down to a stereo output at the Mac. Here's one way.
    2) Plug any RCA cable (single cable or stereo) into only the right or left RCA output of the reel-to-reel.
    3) On the other end of the RCA cable, plug in an adapter like this. That will feed the single RCA output into a mono 1/8" plug.
    4) Then plug that adapter into this. That turns the 1/8" mono signal into a "stereo" output with the same single track audio being fed to the Mac on both the left and right channels.
    5) Record either the left or right output of the reel-to-reel. Rewind the tape and switch the RCA connector on the reel-to-reel to the right channel (if you started with the left) and record that mono signal as stereo.
    Or, avoid all of this hardware mumbo-jumbo in the first place and do this:
    1) Record the audio just the way you have it. Two different recordings, one on each channel.
    2) Copy the audio recording to a new name and open it in your editor.
    3) Highlight the left track and copy/paste it into the right track. Presto! Mono recording of the left track on both channels. Save the recording.
    4) Repeat, only copy/pasting the right track into the left track and save the second recording.

  • All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well.  Anyone know how to fix this?

    All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well.  Anyone know how to fix this?

    Did you try restart the Mac?

  • How do I plot a y axis on the left and right in DIAdem/VIEW (version 11.0)?

    I am trying to analyze flight data, and I would like to analyze plots of certain parameters so that they share an x axis. It is necessary to view these using two different y axis, on the left and right. How do I do this in DIAdem (version 11.0) in the VIEW tab? Is this possible to do in the VIEW tab?

    myocom,
    You can highlight random points in DIAdem as well. 
    Here is an example:
    Use the cursor to move to the point you wish to highlight.
    Press the "Set Data Point and Flag" icon on each data point you wish to highlight
    When you are done selecting points, press the "Flags: Copy Data Points" icon - that will copy all X/Y coordinates into two new channels
    I created a REPORT Layout using the original data and the highlighted random points (I added the actual point Z-value above the point, they look strange when written at the exact point). I attached the layout for your reference.
    The complete task took 3 minutes from loading the data to finishing and exporting the REPORT layout. If you have a REPORT layout already, this will take less than 30 seconds ...
    I am not familiar with Matlab, so I can't compare how this works in DIAdem vs. Matlab. You can add the combine the complete process in a Script and it will automatically create this kind of report after simply selecting a few data points in VIEW and then pressing a button ...
        Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."
    Attachments:
    Report with highlights.zip ‏5 KB

  • I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

    I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

    If you mean there are parts of the picture at the sides you want to remove, you have at least 2 choices.
    You can mask the edges of the frame or enlarge it so that the left and right sides are outside the picture area.
    The latter suggestion will reduce the quality of the video and you will also lose an equal amount from the topand bottom, though you could slide the image up or down.

  • White Borders Around the Left and Right Edge of a Published Movie

    Does anyone know how to get rid of the white borders that are around the left and right edge of a published movie? It looks like they are about a 1 pixel border. I have the "show borders" unchecked in the themes options.
    Any help would be appreciated.

    You need to add some CSS code into the HEAD area of you HTML publishing template to remove the default HTML margin.
    <style>{margin:0px;}</style>

  • It it possible to have info on the left and right sides of iweb templates?

    When I look at my iweb website there is empty space on the left and right sides of my screen. I was wondering if this space could be used at all?

    Hi
    You can increase the width of your Page, go into Inspector, Page Tab. From here you can adjust the Content Width, which is the width of your page, the bits that you see on the left and right are fillers, for people who's browsers are set bigger than your site. You can change the color that shows by changing the Browser Background.
    In the good 'ole days, most people had screens that were only 800 W x 600 H, but these days most people have at least 1024 W x 768 H (some do, no doubt still have 800x600). So, 1024 is really the max width you can go, dont forget that you need to leave some space for the browser as well, and the scroll bars.
    But pages this big are wider than normal, the best thing to do is experiment and see what works for you.
    Will
    1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini   Mac OS X (10.4.6)   www.willg4pb.com for iWeb tips

  • How do I get page numbers on the left and right side of the page?

    I am finishing up a book in PAGES '08 on my Mac.
    How do I get page numbers on the left and right side of the page.
    I can get them on the page but I'd like them on the left and right sides.
    Evan

    If the icons are from dmg files that were used to install 3rd party apps like this one for VueScan
    Control (right) - click on the open dmg icon and select "Eject  xxxx" from the contextual window.
    Then find the actual dmg file associated with those icons
    and drag to the Trash in the Dock and empty.

  • How do I apply effects equally to the left and right channels.

    I am an intermittent user of Sound Track Pro. I've made some cool audio beds with it in the past but right now I'm having two problems since I have not used it in so long and never was pro with it to begin with.
    1. Seems like the lift and stamp tool only works in multi-track mode and not in the wave editor.
    2. so I put my file in the wave editor to redo the effects from scratch there but now I don't know how to apply them equally to the left and right channels.

    Thank you! One more question: I've got quite a bit of interview tape and would like to increase the playback speed to 1.5X or 1.75 x so that I can get through everything faster. Is there a way to set it at those tempos? I only see the 2X, 4X, 6X, etc. options, but these are too fast and I can't understand what is being said. Is there a way to set this to 1.5X the original speed?
    Thanks!

  • Cp 8 - How to add ppt slides to an existing project with space to the left and right ?

    After much trial and error, i know exactly what I want. The priority for me is clear and unscaled captured video, and my project resolution shall be 1260x700. 
    now, i want to bring my ppt slides in and respect the aspect ratio- this means that there will be blank space to the left and right of the slides. The active area of the ppt slide should be about  700 h and 4/3 * 700 width. To avoid scaling, i would love them to be 699 x 932 and have the areas to the left and right blank. i am also willing to make my project 1260x702.
    The objective here is to avoid scaling. I have seen that things look great when scaling is avoided.

    Maybe you'll find some ideas here: Create and Use a "Knockout" Master Slide - Captivate blog

  • When you scroll to the bottom of the list of files in Finder, the left to right scrollbar doesn't let you click the last file and it covers the file for a while until it disappears. Is this a bug? How do I not make that happen?

    When you scroll to the bottom of the list of files in Finder, the left to right scrollbar doesn't let you click the last file and it covers the file for a while until it disappears. Is this a bug? How do I not make that happen?

    An odd workaround: click "Always" in System Preferences/General/Show scroll bars. The scroll bars will always show, but they won't cover your last file.
    See this other post: https://discussions.apple.com/message/20572471#20572471

  • Vibration to the Left and Right of Trackpad?

    I want to know if it's normal for the macbook to have vibration to the left and right of the trackpad. Thanks in advance.

    It's not isolated and the vibrations transfer through the case.
    If I put my hand on the top of the lid I can feel them there as well. Very slight and nothing to be worried about, but there nonetheless.

Maybe you are looking for

  • Time Machine Compatible External Hard Drive

    I went to Best Buy and asked the sales rep. about the Western Digital My Book for Mac vs. the Western Digital My Book Essential external hard drives. He said with the My Book Essential, which is not pre-formatted for Mac, I could format it for Mac my

  • Inserting text from a variable in actionscript

    what is it called when you insert text from a variable in actionscript?

  • Problem with a WS and Byte[]

    Hi everybody, when I create a WebService from a EJB, at the time to test the WebService in the WSNAVIGATOR, the answer of the test page does not work, being left the page in target. In my EJB, I have a called object ImagenVO.java. This object is for

  • Link list problem

    I have one link list class. Each record holds only one data. Now I am going to modify it. Each record holds two real numbers. how to do it? Thanks class ListNode    // package access members; List can access these directly    Object data;       ListN

  • Need help to reinstahl CS3+ jpg CS5 in Mavevick?

    I Need help to reinstahl CS3+ jpg CS5 in Mavevick, apple site says is ok, adobe site also but my cds do not instal, cmputer Imac2,66 GHz intel core i5-  4GB 1067 mhz DDR r ?