Where are the Publics Points (Poi´s) added in the...

Hi, I am from Brazil and I added several publics points (Poi's) or points of interest (as restaurants, hotels, fuel points...) in the nokia maps web (maps.nokia.com). However they does not appear after in the search. When me and other people can see the new publics points?
Solved!
Go to Solution.

Hi, thank you for your reply.
Really the landmark was record in favorites. But the landmark (all) did not appear yet. I can not see it in the map until now. They were record last week. However, when i try add the same marker again the map inform me the marker already exist.
I did not receive message about 24 hours only about more information. Perhaps the problem is the service does not work complete with my country or i should use internet explorer rather google chrome.

Similar Messages

The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?

The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?

If the mouse clicks something on its own then it looks like you have a hardware problem with the trackpad or possibly the battery that is right underneath the trackpad.
I have read that the battery can swell and that would put pressure on the trackpad.

Error #2057: The page could not be added to the print job.

I've been making myself crazy over this one. I'm trying to print a complex multi-page "report" in Flex, but I keep getting this error every time I try to call FlexPrintJob.addObject(page):
Error #2057: The page could not be added to the print job.
Here is the basic scenario... I have created a new control I call a PrintVBox that extends the normal VBox control. After adding all of the children properly to the component, I wait for an update event (so that the heights of all the components are calculated) and then I call a custom method I have added to PrintVBox that "paginates" the control.
This pagination method essentially decides how many of the items in the VBox can fix on each page, and splits them up into separate pages. Here's a somewhat graphic example of what happens:
(before paginate)
***** PrintVBox ********
     [ Item 1 ]
     [ Item 2 ]
     [ Item 3 ]
     [ Item 4 ]
     [ Item 5 ]
This single VBox with 5 items, after calling the paginate method becomes something like this:
(after paginate)
****** PrintVBox ********
     **** VBox (page1) ******
               [ Item 1 ]
               [ Item 2 ]
     **** VBox (page 2) ******
               [ Item 3 ]
               [ Item 4 ]
               [ Item 5 ]
So, what was once a single VBox with 5 UIComponents on it is now a VBox that contains two VBoxes, each the exact size of a printable page, one containing the first two items, the other containing the second two items.
In my example that I am working on, my PrintVBox that I have created uses a Repeater to create about 20 HBoxes on the page. I then call
myFlexPrintJob.start()
to show the print dialog and get the user's parameters. I then pass the chosen print height and width to the PrintVBox control and call the paginate method, which creates pages of the desired width/height. I have tested this part thoroughly and displayed the resulting PrintVBox on the screen and it paginates successfully and all is well. After paginate, it has created 3 page VBoxes each holding some of those 20 items.
I then iterate thru PrintVBox.getChildren() array, in this case which is the three VBox pages, and I call:
myFlexPrintJob.addObject(page);
for each one. Each one errors out with the above error. The error is down in the PrintJob code, which is part of the Flash framework and I cannot step through it. I have no indication of why the page can't be added to the print job. Is there a reason this is happening?? Does it have to do with the Repeater that originally created the 20 HBoxes, even though I have now moved those HBoxes down onto separate pages? I'm just so confused here.
I can probably post the entire code chunk if someone really wanted it. I'm currently testing it as an AIR application using a big tester XML data object on the repeater, so that I didn't need a database and such to create the control and test printing. If someone really wants to see what I'm doing, let me know.
HELP! PLEASE!!
Thanks,
Joe

Were you able to solve this problem?
I am currently having the same problem as yours... I created my own printing classes that do all crazy calculation to figure out page breaks and stuff... everything goes well until the point I want to add these pages to the printJob. I get same error?
Any help is highly appreciated.
Thanks,

The profile could not be added to the device.

Hi,
I have deployed multiple ipads in my company.
I have uploaded a profile with the iphone configuration utility on two ipads with no problem.
The third ipad returns this error message "The profile could not be added to the device."
I have tried resetting the ipad with no success.
I have seen an archived discussion that said :
"I had the same issue (and have already bugged it). I was able to restore function by deleting ~/Library/Caches and com.apple.iPhoneConfigurationUtility.plist. I also deleted the files in ~/Library/MobileDevice/Devices, which correspond to the iPhones I had connected to the iPCU...
Obviously, make sure iPCU is quit before following the above steps. Good Luck!"
I have tried locating the file but it doesn't exist.
Anyone out there knows how to fix this ?
Thanks !

I had the same issue (and have already bugged it). I was able to restore function by deleting ~/Library/Caches and com.apple.iPhoneConfigurationUtility.plist. I also deleted the files in ~/Library/MobileDevice/Devices, which correspond to the iPhones I had connected to the iPCU...
Obviously, make sure iPCU is quit before following the above steps. Good Luck!

PDF export to Excel the decimal point is not displayed in the amount

When I export a pricelist from pdf to excel then the decimal point is not displayed in the amount. It does'n matter in which language I try
Anyone kow why?
So the tool doesn't work for me.

I have no problem. What is your country setting for the decimal separator?
Attachments:
read from csv.png ‏18 KB

While browsing the cube data Excel the circle pointer starts to spin and the excel go into a not-responding state,any recommendations to improve performance in excel?

hi,
while browsing the cube data Excel the circle pointer starts to spin and the excel go into a not-responding state,any recommendations to improve performance in excel?
I have 20 measures and 8 dimensions.
while filtering data by using dimensions in excel it is taking so much time.
Ex:
I browsed 15 measures in excel and filtered data based on time(quarter wise) and other dimesion product. It is taking long time to get data.
Can you please help on this issue.
Regards,
Samba

Hi Samba,
What're the versions of your Office Excel and SQL Server Analysis Services? It will be helpful if you can share the detail computer resource information to us while encountered this issue.
In addition, we don't know your cube structure and the underlying relationships. But you can take a look at the following articles to troubleshoot the performance issue:
Improving Excel's Cube Performance:
http://richardlees.blogspot.com/2010/04/improving-excels-cube-performance.html
Excel Against a SSAS Cube Slow: Performance Improvement Tips:
http://www.msbicentral.com/Blogs/tabid/131/articleType/ArticleView/articleId/136/Excel-Against-a-SSAS-Cube-Slow-Performance-Improvement-Tips.aspx
Regards,
Elvis Long
TechNet Community Support

I get black screen on my new macbook air but I can see the mouse pointer. usually need to restart the computer so everything works as it should

I get black screen on my new macbook air but I can see the mouse pointer. usually need to restart the computer so everything works as it should

Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
If that does not help, reinstall OS X

I have a cold fusion site.Is there a way to integrate Amazon to Cold Fusion so the persons products entered in the site will automatically be added to the amazon store as well?

Is there a way to integrate Amazon to Cold Fusion so the persons products entered in the site will automatically be added to the amazon store as well?

If Amazon has an API to add products to an Amazon store (and I'm fairly sure they do), you would just have to write code to submit your products via that API (probably using CFHTTP calls).
-Carl V.

HT4623 i'm updating my iphone 3gs but i get to the activation point and it tells me the activation server is temporarily unavailable and i keep trying .i'm worried to loose some of the memo

i'm updating my iphone 3gs but i get to the activation point and it tells me the activation server is temporarily unavailable and i keep trying .i'm worried to loose some of the memo? please advice

That's almost always because the phone was hacked or jailbroken to unlock it.

Text effect where it has a pointer that motion tracks on the subject and anchors to the text?

I've tried many different search terms and had very little luck. I found one video where they use the beam but I think he was using a different version of after effects and I couldn't complete certain steps. I'm using after effects 2014 cc. Thanks!

Depending on the shot you could run AE's camera tracker and add the text so that it was locked to the camera move then track the object you wanted to add the pointer to and attach the start position of the beam effect to the text position and the other end to a null that had the tracker info.
If the camera tracker does not work out then you could stabilize the shot so that some object on the background didn't move then duplicate the stabilized shot, pre-compose the duplicate, then track the object in the shot you want to track. You would then apply that tracking data to a null, copy the null and paste it to the first comp. Then you would add your text layer to the stabilized shot and then add a solid with the beam effect. You would then attach one end of the beam to the null's position and the other end of the beam to the text. You end up with a stabilized shot the null that controls one end of the beam and the text layer stuck to the now not moving background. You add another null to the project and then tie the position of this new, let's call it destabilize, to the anchor point of your stabilized footage, use the keyframe assistant to convert the expression that ties the start end of the beam to the null to keyframes, then parent all layers to the null to put back the camera movement and track the other layers to the camera movement.
Got that? It's kind of confusing. The right technique depends entirely on the shot. If you can put the shot up on YouTube or Vimeo so we can see what you are trying to work with maybe we can give you a better idea.
Here's how to stabilize a shot, add some graphics, and then remove the stabilization using a null and simple expression.
I'm working on a more in-depth tutorial on this subject but it probably won't be up for a few days. In the mean time here's an animation preset that will work with this technique if you stabilize including stabilizing scale and rotation.
Here's another quick tutorial on how to use the camera tracker to add some text to a scene:

What are the dependent SCs to be added to the Track, to develop NW CE BPM

Hello Gurus:
We are creating a track in a NW 70 SP17 system to be used for NW CE 7.1 Ehp1 SP03 applications, like Business Process
Management applications (Process Composer, Rules Composer). While creating the track, I chose the track template to be "Composite Application 7.1 (with Business Process Management)". And I added the following 14 dependent SCs to the development SC I added to the track.
CAF01_0.SCA
CAFMF01_0.SCA
ENGFACADE01_0.SCA
ENGINEAPI01_0.SCA
EPBASIS01_0.SCA
EPBASISAPI01_0.SCA
EPBUILDT01_0.SCA
ESF01_0.SCA
FRAMEWORK01_0.SCA
GPCORE01_0.SCA
MMRSERVER01_0.SCA
SAPBUILDT01_0.SCA
VCFRAMEWORK01_0.SCA
WDRUNTIME01_0.SCA
But when as a Developer when I try to create a DC of type Process Composer, that project type is dummied or disabled ???
Other project types like Composite Application, Web Dynpro etc are enabled and working fine.
Question:
Is it enough to add corresponding dependent SCs related to Business Process Management ? If so what are those SCs ?
(ii) If I need to choose another track template like " Business Process Management Application for NetWeaver 7.1" which is also available, then how could I have DC project of type Composite Application ?
Appreciate your help,
Prasad Nutalapati

Satish:
I am talking about creating DC projects of type 'Process Composer' for NW CE BPM applications, with in a track I created using a certain template I mentioned. How would that relate to NW Dev Studio ?
To answer your point, when I try to create a local DC project of type 'Process Composer', yes I was able to, no problem. Because the NWDS is from the same CE Server installation files (7.1 Ehp 1 SP00).
Thanks,
-Prasad

Where are image files stored for tiled backgrounds in the templates?

I am working with a template, but wanted to change the image that is set to tile in the background of one of the text boxes. I wanted to use another image that is set to tile in a different box, but I cannot locate this image. When changing the image on the Image Fill, after I click Choose, I need to point to an image file - anyone know where these images that are in the templates are stored?

The files are located in the theme package that's located in the iWeb application: iWeb/Contents/Resources/Themes folder. From there you find the theme, open the package and drill down till you find the image files. You will have to use Quickview to locate the one you want.
What theme are you using?
OT

Disastrous spyware, needed disk scrubbed, then went to OSX 10.5.8 - so where's a Three Pointer version? I had the updated last one on Tiger and lived in it all day.

Details? What I said... My work is totally browser based and I lived in a house made of Firefox. On a G5 with OSX 10.4.11. Tiger. Now I'm in Leopard but still, the pesky G5 chasm...
I'm New Orleanian. When Leopard came along we were much too busy trying to find building supplies after The Unpleasantness of 2005 to notice, then it was gone. This iMac G5 was the star for about two weeks- then Steve Jobs said "Look! Intel Proccessors!!" Oh dammit!
( I look for things- coin silver antique Arabian stirrups to support group boards for people who really do wear tin foil hats and will argue styles of making them. Don't laugh! A qualified proffessional is studying the sites. She wanted help finding them. Exotic things to buy is more fun.)
So I had either a bot, huge spyware glob, or something mildewy on the system files remora style. It ate clean up appies like canapes, and I had to take the iMac into Apple Store. I backed up my several thousand bookmarks, planning to just get a fresh new Fox after; Five years of updates and add ons taken off makes a browser creaky.
Apple Store scrubbed the drives completely, then updated me for free to Leopard so my iPhone will work; Tiger was just done. Over. I'm back cruising the cyber spaces again, but in Safari. Bleh!
So where's a Firefox for us still retrogrouching? The cash for a new Apple is tight now and I'm going to have to last six months to make a Mac Mini- when Lion will be out. I need the last Firefox, a 3.6 I think? Something to put my fave security add ons on and get back to work?
There's a lot of us out here on a tight budget getting left out and behind. Be a sport, guys, give us a link for a bit longer?

This is a user to user forum - you aren't talking to Apple here. I'm afraid all we can do is sympathize - you have described the situation exactly. Whenever you do any system upgrade it's advisable to check on its requirements - that for iOS7 presumably indicates that iTunes 11 is required. I'm sorry to say that there is no solution for your situation.

Migration interupted at the 95% point, 750GB aleady moved from the TM

I was trying to build a new system disk on an external drive using the Time Machine files. After 9 or so hours it just about reached the end with minutes left to go when the power failed. I forgot to plug the drive into the UPS, so it went down with the power. It is very difficult for me to take the computer out of service while starting again from scratch. Is there any way to use the Migration Assistant as a background task, continuing to take files from the Time Machine and putting them on the external drive... basically continuing where it left off. I tried running the Migration Assistant, but it ignored the files that had already been moved, discovered there wasn't enough free space left to start over again, so quit. I tried booting to the installation disk in hopes it would look at the target drive and determine which file were already moved, but that didn't work either. Any other options?

Will the Mac boot from the external HD? If it will, and assuming you know at what point it failed (ie., what you have and what you don't), you might be able to restore the remainder via the normal TM interface. You will, of course, have to restore to an "alternate location" (see #16 in the Frequently Asked Questions *User Tip,* or at the top of the Time Machine forum).
If all your user accounts are there, it might work. What I'm not sure of is how and when MA sets permissions and other "housekeeping" type things.
If the Mac won't boot from the external HD, then you probably have no choice but to erase it and start over.

Why do I receive the exclamation point when I just change the album name? File goes missing?

I keep all of my itunes media on an attached network hard drive. Had no problems for months but over the past 45 days I've noticed that material has started to go missing that I know I did not delete. I have found no malware on my system.
I read a script to tell me all the files that had an exclamation point. There were some TV shows (an entire season gone missing) and some CDs.
I just did a test and imported a CD. I then clicked "get info" and changed the name of the album. Immediately I received the exclamation point and when I tried to find the original file it is gone. I have no idea where the file has gone to. I've tried searching, looking around to find it, and I can't.
Why is itunes having this behavior? How is the file being deleted? Any other thoughts or ideas of what I should do to stop this?
I've also sent a support request to the hard drive mfg (lacie) but I'm not sure I'll get much help there.
Thanks.

More info: I just ran the same test two ways. One, I had some files on my desktop, run a script to move these files to the "automatically add to itunes" folder, the files move just fine to my external hard drive and to itunes. The file plays just fine and the "get info" tab shows it is playing the file from the external hard drive where the file was moved to (not copied). But, as soon as I change the artist name or the album, the file goes missing and I get the exclamation point.
I ran the same test by putting the files on my desktop, but instead of moving the file to the "automatically add to itunes folder" I just double clicked the file to play it. I let itunes add a copy and organize my folders. This time, the file would have been copied (not physically moved) and I see itunes is playing the new copied version. This time, when I try to change the artist name or album, I have no problems.
I've never encountered this before. Any info? Thanks.

Where are the Publics Points (Poi´s) added in the...

Similar Messages

Maybe you are looking for