Where are the Release Notes for JHeadstart 11.1.2?

Could you please tell me where the Release Notes are for JHeadstart 11.1.2?
Thanks very much.
Mary
UofW

Hi All:
Found them.
Help > JHeadstart Documentation Index
found within JDeveloper after installation of Jheadstart 11.1.2.
Mary
UofW

Similar Messages

Re: Tecra A10 - where are the release notes for updated BIOS?

Hi,
I have a problem with my Tecra A 10, it occassionally shuts itself down.
I've updated from BIOS 1.4 to BIOS 3.0 to see if this fixes it.
I can't find any release notes to see what has changed between BIOS revisions, can someone point me to them?
Thanks
Dominic

Hi as***,
Thanks for that, exactly what I was looking for.
I won't know if it's fixed it or not until I run the laptop for a few days as it only happens every now and again.
I can already see faster boot times after the bios update though, which is one of the things listed in the bios change history so it was worth updating it.
The laptop is only a few months old, I checked the heat sink before I updated the bios as I read this shutdown problem can be caused by overheating due to a clogged heat sink but mine is clean already.
It also has a problem with the USB ports, sometimes when I plug in a USB device it blue screens, again not consistently, just every now and again. I'm hoping the bios update might help with that as well but still going to look at any other firmware that might help as well.
Thanks
Dominic
P.S. Here is the change history for anyone else searching
ACPI Flash BIOS version 3.00 for Tecra A10/M10 (PTSB3U/PTMB3U/PTMB7U)
Change History
Version 3.00 - 2009-10-29
o Implemented the INTEL specification for the Mobile Intel 45 Express Chipset (Cantiga) to improve stability.
o Changed the BIOS Setup Menu for Virtualization Technology from Enable/Disable to Disable/VT-x&VT-d/VT-x Only/VT-d Only.
o Added eSATA HDD boot support.
o Fixed: Internal USB devices may be shown as removable devices in the Windows 7 "Devices and Printers" window.
o Improved "resume from hibernation" stability.
o Improved boot stability when the Computrace function is enabled.
Version 2.00 - 2009-02-24
o Implemented the INTEL specification for the Mobile Intel 45 Express Chipset (Cantiga) to improve stability.
o Improved stability of 64-bit Windows.
o Added support for 8GB memory on 64-bit Windows Vista.
Version 1.90 - 2008-12-15
o Added support for Penryn processor E0/R0 Stepping.
o Implemented INTEL specification for Mobile Intel 45 Express Chipset (Cantiga) to improve stability.
o Added support for Penryn Seam processors.
o Improved Operating System (OS) load speed.
Version 1.80 - 2008-11-20
o Added support for Penryn processor E0/R0 Stepping.
Version 1.70 - 2008-11-06
o Added countermeasures for the chip which cannot read a Thermal register. (Updated the VGA BIOS)
o Added Merom Seam processor support.
o Added Merom Pentium Dual-Core processor support.
Version 1.50 - 2008-09-30
o The thermal parameter for the Wireless-WAN model is implemented.
o LAN Boot time is improved.
o Corrected: VGAPOST time is to long.
o Corrected: Chip can not read a thermal register.
Version 1.40 - 2008-09-01
o First production BIOS release for these models.
Applicable Models:
Tecra A10-SP5920R, A10-ST9010, A10-S3501, A10-S3552, A10-SP5802, A10-SP5802A, A10-SP5920A, A10-SP5908, A10-S3553, A10-S3511, A10-SP5802C, A10-SP5920C, M10-ST9110, M10-S3401, M10-S3412, M10-S1001, M10-S3453, M10-S3452

Where are the release notes for the latest Shockwave 12.1.2.152

The download is not associated with the latest Shockwave security bulletin APSB14-10 (v12.1.0.150)

Adobe Live Chat .. useless
"click here for more info: Adobe - Adobe Shockwave Player "
As if an Adobe "get" page ever had any technical information, ever.
A LANDESK forum suggests it is a security update, even giving a line of advice that sounds parroted from a standard Adobe security bulletin, but where?
"(June 04, 2014) Adobe has released Shock wave Player version 12.1.2.152: Adobe recommends users of Adobe Shockwave Player 12.1.1.151 and earlier versions update to Adobe Shockwave Player 12.1.2.152."
https://community.landesk.com/support/docs/DOC-31844

Where are the Release Notes...

Does anyone know where I can find the release notes for the latest iPod update?

Hi All:
Found them.
Help > JHeadstart Documentation Index
found within JDeveloper after installation of Jheadstart 11.1.2.
Mary
UofW

Are there release notes for the new Flex Ajax Bridge?

Are there release notes for the new Flex Ajax Bridge?

Hello,
You can find the release notes
here
. The wiki page has been updated as well to point to the release
notes document, in the Where can I find out more section.
Thanks for noticing they were missing,
Cristian

Where can I find the release notes for iTunes 9.0.3?

Where can I find the release notes for iTunes 9.0.3?
You would think they would be available from the download link location.

I agree and find it odd, but then, there is only the most rudimentary and superficial 'notes' -
iTunes 9 also includes many other improvements, such as HE-AAC encoding and playback, more flexibility with Smart Playlists rules, simpler organization of your media files inside an iTunes Media folder, and more.
Nothing like "fixed bug with using..."

Where to find release notes for firmware v20 of 58...

Anybody know where i could find the release notes for firmware v20? I wish to know what are fixed. Thanks!

Changelogs are considered confidential information by Nokia. You'll not see an official document reporting the changes made. What you might see is leaked documents on some websites, and you have to take those with a pinch of salt.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Where are the epson drivers for Mavericks for the artisan 835

Where are the epson drivers for Mavericks for the artisan 835

OMT8 wrote:
Well, I have this printer too, and I get the following response from the System Prefs Printers and Scanners when I select to add this printer:
"The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software."
When you go to the Epson website for this particular printer it says:
"The latest drivers for this product are available only via Apple's Software Update."
And finally, when you go to Software Update it says: "No updates available"
I second OMT8.
Yes, the driver file at http://support.apple.com/kb/DL1398 allowed me to finally install my printer, but does Apple have _any idea_ how long it takes to download a 1.08GB file over a 1.5mbps DSL connection?
Never mind how much of my pricey new SSD is being consumed by the resulting 1.80GB of driver files all for _one_ printer driver that should maybe occupy 200K?
Or that the primary article on OS X printer drivers (http://support.apple.com/kb/HT3669) -- which does indicate that the Artisan 830 is supported -- does not mention or link to the driver file that's needed to make it work?
Or what a complete violation of Apple's "it just works" gestalt it is to be confronted with the above Catch-22 and to have to search the web and then go through all of the above to make a new laptop talk to a two-year-old printer?
Yes, my printer now works, and yes, Apple's Support Communities were instrumental in getting to this point. But spending all morning (plus download time) getting a printer driver installed tastes way too much like I paid for Apple and got Microsquish.
-carl-

Experts - where are the main settings for country currency settings

Hi
where are the main settings for different country currency settings.
Ex:
us,canada and europe customers us$, canada $, europe euro,
How the pricing will effect for different country customers?
Any one can help me on this.
Any documents on thes please send to [email protected]
Thanks
Kris

You can find this in the following path.
SPRO->GENERAL SETTINGS> SET COUNTRIES>DEFINE COUNTRIES-->
Here countries have an ISO CODE
Then
SPRO->GENERAL SETTINGS>CURRENCIES-->CHECK CURRENCY CODES
Here ISO codes mapped to currencies.
If CCode currency = Customer master currency, then transactions will happens in that currency
If CCode currency<> Customer master currency, then the exchange rate will come into play to convert customer currency to company code currency.
And anway if you want a different currency from the country currency, you can mention that in ccode configuration. The presence of currency in company code configuration is must and hence configuration at country level is not needed I think
Hope this helps.
Rewards pls
Message was edited by:
Navaneetha Krishnan

URGENT: Where are the upgrade scripts for Tier1 ?

I found the upgrade scripts for 3.0.6/3.0.7 to 3.0.8 for Windows NT and Solaris here on Technet, but where are the upgrade scripts for the Tier 1 platforms ? I urgently need the ugrade script for Tru64. Please help.

Sorry for the confusion - the page should be updated very
shortly. In the meantime, you can download the 3.0.6/3.0.7/3.0.8
to 3.0.9 scripts for NT/2000 at:
http://download.oracle.com/otn/nt/portal/p1831355_309_WINNT.zip
and 3.0.6/3.0.7/3.0.8 to 3.0.9 scripts for UNIX at:
http://download.oracle.com/otn/solaris/portal/p1831348_309_UNIX.z
ip
Note that these are the same scripts that are accessible from
Metalink (NT/2000 - Patch:1831355) and (UNIX - Patch:1831348)

Where are the sample files for dreamweaver cs 5.5 on Adobe TV?

where are the sample files for Dreamweaver cs 5.5 on Adobe TV? video says there there, but there not! Video even shows where to find them, but there still not there! Were they just to big for Adobes servers to handle so the had to take them down to make space? : ) Please help, could really use them. Thanks! : )

CS5.5 is now 4 versions behind CS6, CC and CC2014.
This tutorial was written for CS5 and it works with CS5.5. You'll find the supporting files for it under Sample Files on the right.
Building your first dynamic website – Part 1: Setting up the site and database | Adobe Developer Connection
Nancy O.

Where are the updates located for Mac App Store app?

Hi,
where are the updates located for Mac App Store app? I don't think /Library/Updates is the only location. Because I'm now having 10+ of Apps reporting updates is needed, but only 1MB＋ files is located in /Library/Updates.
Please help!

If so just use the search bar in the top right to search for the update you are looking for.

Where are the backup files for my iPad located on my macbook pro with maverick ?

where are the backup files for my iPad located on my macbook pro with maverick ?

As an addendum, if I need to, and hopefully won't, unless I switch computers, how can I revert from a copy of a different backup? Thanks. :-)

Where are the latest updates for PSE 11 located?

Where are the latest updates for PSE 11 located?

Unless you have the mac app store version, Editor>Help>Updates should get you all the available updates.

Where are the swipe preferences for calendar located

Hi
Where are the swipe preferences for calendar located? Is it two fingers swipe down to goto the next month?
Thank you in advance.

I don't know that there are any preferences for setting what swiping does in the Calendar.
Two finger swipes left and right skip months in month view. They skip weeks in week view. Two fingers up and down scroll up and down (which does nothing in month view).

Where are the Release Notes for JHeadstart 11.1.2?

Similar Messages

Maybe you are looking for