Where are the speech analysis models?

I'm evaluating Premiere Pro CC and like others am struggling to install an additional (specifically the international English) speech analysis model under OSX 10.8.5. The file downloads to a disk image and the Application Manager launches and runs. However the CS6 International Speech Model is not installed in the default location (Library/Application Support/Adobe/SpeechAnalysisModels/CS6) and I cannot find the folder or files located anywhere else (ie through Finder.) On subsequent attempts Application Manager provides info that "an earlier installation of this product was found" etc. The new language option is not available in PP 7.1.0. What am I doing wrong...?

Hi Tim,
See if this KB doc helps you: http://helpx.adobe.com/premiere-pro/kb/installing-additional-speech-libraries.html
Thanks,
Kevin

Similar Messages

I have premiere pro cc and i can't put the speech analysis models spanish for adobe premiere pro cc

I have Premiere Pro CC and I can't put the Speech Analysis Models Spanish for Adobe Premiere Pro CC, they're installing on the folder CS6 and when I try to analyze it only appears on english... If anybody can help me

the messsage is for forum housekeeping and is not a message directed to you.

Downloaded a spanish speech analysis model for Premier CC but it appears as if it has not been applied to the settings, I cannot select spanish in the analyze window.

I just downloaded a Spanish speech analysis model for premier cc, installed it, restarted premier, started a new project, did both multiple times, even reinstalled the model and I still cannot select Spanish as a language to be analyzed in a project... Any ideas?
-Cheers

Nevermind. I finally found a third party answer and will post it for anyone else with my problem.
>Go to the iTunes store.
>Halfway down the page, right hand side, says account
>Under account it says purchaced, select that
>Wa-la

How do I install Speech Analysis Models for PPro CC?

I downloaded the International English speech analysis model from here:
http://www.adobe.com/uk/products/premiere/extend.displayTab3.html
Which says they're for CC as well as CS6.
But when I install it, I don't get the option in CC to analyze clips using anything but US English.
The models are installed here:
C:\Program Files (x86)\Common Files\Adobe\SpeechAnalysisModels\CS6 so I tried creating a CC model, copying the CS6 content across, and restarting Premiere. No joy. What else can I try?
Cheers
Mark

joshweiland wrote:
To clarify, you created a new "CC" folder inside C:\Program Files (x86)\Common Files\Adobe\SpeechAnalysisModels\ and put the files there?
Exactly that. Also tried naming the folder CS7 and CS7.0
joshweiland wrote:
If that doesn't work, perhaps try putting them in the 64-bit Program Files folder, like the following:
C:\Program Files\Common Files\Adobe\SpeechAnalysisModels\CC\
There is no SpeechAnalysisModels folder inside the 64-bit Program Files folder.
But I tried your suggestion, and tried the different names for the folders as above.
No success.
Thanks for your suggestions, though.

Adding Speech Analysis models to SB 2.0

Hi, I was wondering if anyone know how I go about adding additional Speech Analysis models to SoundBooth 2. Specifically UK English as the Master Collection installer only seems to offer US English.
Many thanks in advance
m

After searching a bit harder I finally found the link: http://www.adobe.com/products/soundbooth/speechtotext/
Be warned, they are pretty big (Intl English is ~445MB)
m

Where are the plugins installed in photoshop adobe official website

where are the plugins installed in photoshop adobe official website

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

What are the GAP analysis? could you pls... explain with examples?

hi everybody.....
may i know what are the GAP analysis with examples?
thanks in advance...
and hope u will get it me that.

Dear arunteja vasan ,
GAP Analysis
A through gap analysis will identify the gaps between how the business operates ad its needs against what the package can can't do.   For each gap there will be one of three outcomes which must be recorded and actioned, GAP must be closed and customised software can be developed close the gap, GAP must be closed but software cannot be written therefore a workaround is required, GAP does not need to be closed.
In simple terms: Gap means small cracks. In SAP world. In information technology, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be." Gap analysis is undertaken as a means of bridging that space.
Actual gap analysis is time consuming and it plays vital role in blue print stage.
Cut Over Plans
Detailed plans need to be developed for cutting over from the old system(s) to the new.   Parallel runs of what will happen over the conversion period using test data, convert and watch for a period after wards to ensure nothing unexpected happens.
Train Users
Well trained users will support and defend the system on site. Unsupportive users will continually undermine the system and eventually it will be replaced.   Therefore the more effort you put into helping the users master the system early the better.
Do award points if you found them useful.
Regards,
Rakesh

Speech Analysis Model-Spanish

Even after I download the Spanish Speech Analysis Model, the Spanish language is still greyed out when I try to "analyze content" on my clip. How can I download it so that the option will be available?

So I think I found the solution to the problem, Titan. It's very unhelpful on Adobe's part, but the solution is to install the language modules using Adobe Exchange. Open Premiere and go to Window>Extensions>Adobe Exchange and install from there.
See this article for more info: Install additional speech libraries

Where are the actual Aperture files located? Only in the application? I am transitioning to Lightroom and would like to only move some of the files. Advice appreciated. Also anyone know how to transfer in with edits?

Where are the actual Aperture files located? Only in the application? I am transitioning to Lightroom and would like to only move some of the files. Advice appreciated. Also anyone know how to transfer in with edits? Using iMac, OS X, most recent Aperture and Lightroom 5.7 with plugin for Aperture.

Define "the Aperture files".
Read this concise guide.
The files you imported into an Aperture Library can be exported (at any time, and repeatedly) using the command "File ▹ Export ▹ Originals". Your Originals are never altered. What went in is what comes out.
Adjustments and changes to the metadata that you made since creating an Image in Aperture by importing a file are saved to a text file. This file is combined, on-the-fly, with the Original to create the Image that you see in Aperture. There is no file saved to disk that is the full-size Image. Thumbnails are saved, and Previews are saved. These are JPG files, almost always smaller than the Original. They are not substitutes for the Image for the use you have.
When you need a file of an Image to use in another program, you export the Image from Aperture. "Export" means "Make me a file of this Image according to these file specs I'm providing". The way to get files of your adjusted Images is simple: create them by exporting. Specify "Original size", and use a loss-less image-file format (e.g. TIFF 16-bit) if you want to retain as much visual information as possible.
Search the Web for information about transitioning from Aperture to Lightroom. Note that I say "transitioning". You cannot move a database from one format to another without significant changes, and likely some loss of information. Adobe provides a tool and some instructions. I strongly recommend working out the process step-by-step, and then proceeding with first a few Images, then a bushel-ful, and stopping to use the first few, the the bushel-ful, before committing your entire collection to the process.
As always, never use any computer file without having a back-up.
We have seen mixed reports here of the success of the LR tool that creates a LR database from your Aperture database.
If you want to carefully define the process, and test and refine it, use the excellent process-development, analysis, and execution program inShort.
Sadly, there is not and can never be a good, thorough re-positioning of the digital assets in your Aperture Library to become digital assets in a LR database. Just as a metaphor for any user contemplating transitioning to another digital asset manager: that would be like digging up a house in one country, planting it in a hole in another country, and expecting to be able to use the toilet and the sinks, turn on the lights, cook dinner, and sleep soundly.
HTH,
Kirby.

Where are the drivers for HP LaserJet 5P for Windows 8.1 (64bit)?

Had been using HP LaserJet 5p printer with HP LaserJet 5p printer driver, but had printer disconnect for a few months due to not have black toner. Now I want to use the printer and my control panel does not show HP Laser 5p printer for my tablet but shows it for my laptop. I can not find the driver on the HP support list and the support list does not recognize HP LaserJet 5p.
Where are the drivers for HP LaserJet 5p for windows 8.1 (64bit)??????

Hi,
Basic print drivers are available for the HP Laerjet 5P via Windows Update.
Follow these steps to install the printer drivers on Windows 8.1:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03470332#N100AA
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hi there, I pay for extra iCloud space online. However I cannot seem to find any of my photos or account? As my iPod/iPhone only hold 1000 pictures, where are the previous pictures? And how can I access them?

Hi there, I pay for extra iCloud space online. However I cannot seem to find any of my photos or account? As my iPod/iPhone only hold 1000 pictures, where are the previous pictures? And how can I access them?

You cannot use iCloud Storage to suppliment your iPad. They are mainly used to backup iPad.
Free up space on iPad
Settings>General>Usage>Storage>Delete what is not needed to free up space on iPad.

Where are the drivers?

Alright it's probably a stupid question but I just bought a new mac that came with leopard.I used boot camp to partition and install windows vista on my new mac. Everything worked fine until I had to install the drivers.I don't know where the drivers are. They supposed to be in the leopard dvd that i don't have. Where are the drivers?

Hi Obe7,
the Mac OSX install disc that you used to install Leopard on your Mac is a 'hybrid'-disc, which contains an OSX part (only visible while in OSX) and a Windows part (only visible while in Windows).
The BootCamp 2.0 drivers are on the Windows part of that disc.
While in Windows insert that disc and usually the driver installation starts automatically.
If not, use the Windows Explorer to navigate to the disc and start the 'setup.exe' file manually.
Stefan

Where are the older BIOS versions gone?

Hi
A few weeks back, I've upgraded the BIOS on my Pavilion G6 1001sq to the latest version (F66). I noticed that the laptop is running considearbly hotter since then and I want to revert to an older BIOS version. When I go to the updates page on the HP website and click on "older versions available" I can only see the F66 version on the page I'm directed to ( http://h10025.www1.hp.com/ewfrf/wc/previousVersions?softwareitem=ob-115746-1&cc=us&dlc=en&lc=en&os=4... ), although a long list with many versions was available till recently. Where are the older versions gone?

Unfortunately, I do not know where they have gone. HP is working on issues with the suport and driver servers at the moment.
Since your notebook does have the UEFI Diagnostics installed, you should be able to rollback to the previous version that was installed. Use the firmware management option to do that.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Where are the print drivers found?

I have a Brother HL 2040 laser printer. THe Brother website has a version 2.2 driver for this printer. I downloaded and installed. When I add the printer I keep getting version 1.4 driver.
Can someone tell me where are the drivers found on my iMac?
Also I am trying to get this to print via a Linksys wireless print server. Do I use the ip address for the print server or the printer when adding this.
I tried using the print server IP but I get a "printer paused" issue. I think I need the new print driver.
thanks in advance for any help.

I have not gotten the driver to update to the newest version. I deleted the Brother Folders as mentioned in the replies, no joy. No matter what I do it ends up 1.4 not 2.0.
Version 1.4 worked OK for a USB connection, so I went forward with trying to get the network connection going. By trying every combination available I got it to work.
What HP jetdesk-socket has to do with my printer...escapes me. But that combination with version 1.4 driver works.
I will leave well enough alone.
I have 2 other computer to update to SL.....maybe.

Where are the epson drivers for Mavericks for the artisan 835

Where are the epson drivers for Mavericks for the artisan 835

OMT8 wrote:
Well, I have this printer too, and I get the following response from the System Prefs Printers and Scanners when I select to add this printer:
"The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software."
When you go to the Epson website for this particular printer it says:
"The latest drivers for this product are available only via Apple's Software Update."
And finally, when you go to Software Update it says: "No updates available"
I second OMT8.
Yes, the driver file at http://support.apple.com/kb/DL1398 allowed me to finally install my printer, but does Apple have _any idea_ how long it takes to download a 1.08GB file over a 1.5mbps DSL connection?
Never mind how much of my pricey new SSD is being consumed by the resulting 1.80GB of driver files all for _one_ printer driver that should maybe occupy 200K?
Or that the primary article on OS X printer drivers (http://support.apple.com/kb/HT3669) -- which does indicate that the Artisan 830 is supported -- does not mention or link to the driver file that's needed to make it work?
Or what a complete violation of Apple's "it just works" gestalt it is to be confronted with the above Catch-22 and to have to search the web and then go through all of the above to make a new laptop talk to a two-year-old printer?
Yes, my printer now works, and yes, Apple's Support Communities were instrumental in getting to this point. But spending all morning (plus download time) getting a printer driver installed tastes way too much like I paid for Apple and got Microsquish.
-carl-

Where are the speech analysis models?

Similar Messages

Maybe you are looking for