Where can get IDOC Error Message from Data base tables
Hi ,
i am automating idoc checking process,in which i am getting control record from EDIDC tables,now i need to fetch Error message
using this idoc no.
How can fetch error message text ?
Thanks in advance.
Regards
sarath
Hi its a structure, it doesnt store data.
Take it from the table specified,
Pass STAMID,STAMNO,STAPA1,STAPA2,STAPA3,STAPA4 to function module MESSAGE_PREPARE and you will get the message text.
Also check the function module IDOC_READ_COMPLETELY
Similar Messages
-
Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?
Maybe it's set as a login item:
- System Preferences: Users and Groups:
- Highlight your user account in the left pane/list
- Click "Login" tab at the top.
See if you have an Automater action on the list
- Note, you can select it, then right-click, and can then select "Reveal in Finder". That way you might have an idea what installed it. -
To try to resolve this problem, I have done the following actions.
1 - I have run Disk Warrior.
2 - I have repaired permissions.
3 - I have deleted all plist that are either Cannon or Adobe.
4 - I have downloaded and installed the lastest versions of Adobe Reader and the Cannon printer drivers.
I am still unable to print PDF's.
In Safari, I can print only the first page. In a multipage PDF, Safari only seems to recognize the first page.
In Adobe Reader, I get an error message from my printer: "/usr/libexec/cups/filter/pstocupsraster failed".
Any help would be greatly appreicated!Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. -
I was updating my iphone, lost my data, and was trying to reload the phone data. keep getting an error message and data will not restore. There is a (-50) at the end of the error message. Any ideas on my next step?
Thats the annoying part! I have enough space and I'm putting things on a external hard drive and I keep deleting it off the computer.
-
What to do when you get an error message about data execution prevention
i have windowsXP and i downloaded Itunes now that i try to open itunes i'm getting an error message about Data Execution Prevention. Please let me know what to do to be able to open itunes...
You came from the correct article. Here is what it has to say about that error.
Error 2, 4 (or -4), 6, 1000, 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
Hi,on starting firefox which i have used solely as my browser for years i am now getting an error message from java script application that shows my username followed by a message saying; 'username'-Invalid username/password combination.If you keep getting this error,try entering your email address as your username'. I then press the OK button within that error message box and it dissapears and everything seems ok although hover my cursor over the mail(envelope) icon and it says not connected.
I only started having this problem since downloading firefox 4.It also does not tell me where this problem is occuring so i do not know where to log on with this information.I would be most grateful for any help with this matter.Many thanks.Take a look in the Error Console for details about that.
Tools > Error Console <br />
Right-click the message and use '''Copy''' to get that complete message. -
When sending an email through windows live I get an error message from WebKit2WebProcess.exe
Hi,
Every time when I try and send an email from windows live I get an error message from WebKit2WebProcess.exe.
Not sure if I deactivate this from Windows live whether I will compromise my security.
Any advice would be helpful.
Thanks,
BeckyThank you Matt. I'm sure this will be frustrating ...but the more I think about this problem there more info I have to share. The emails I write that do not get sent do end up in my "sent" folder but never reach the recipient. And, most perplexing, the issue/problem is sporadic. It was coming and going before I switched over to the SSL/TLS option in T-bird. And...since the switch it has reappeared and disappeared. I have made zero changes other than the above mentioned. I did get a security update today for T-bird perhaps this will help?
I read your link, thank you.
I obviously don't understand how these systems work. I'm baffled how an issue like this can come and go... -
i just updated the latest software for my ipod....now i'm getting a error message from itunes of 0xe800000a what does that mean????
See:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting -
I'm getting an error message from Firefox that says, "Something is trying to trick Firefox into accepting an insecure update. Please contact your network provider and seek help." Do you know what is going on here--what this problem could be? (I do have the latest Firefox version already installed. I have previously received Firefox error messages that say "Firefox Update Failed." However, I already had the latest Firefox version installed when I received those error messages.)
Apparently this occurs when Firefox has problems with security certificates. There have been a few questions about this. I will try to get advice about this.
Apparently you are using Internet Explorer 9 (From your system details). Do you have Google Updater plugin installed on Firefox ?
(That been implicated in this sort of problem by one poster, and some users with the problem do have Google Updater, but some do not) -
I have a Free Agent external backup hard drive connected to my iMac Intel desktop via USB, I never unplug it. Why do I get an error message, from time to time, upon startup stating, "Disk was disconnected improperly. Always eject disk before disconnecting."?
I never unplug the external harddrive, and the error message comes up only occassionaly upon startup. Maybe the USB connection gets disrupted enough to cause the computer to see it as disconnected and then reconnected while the iMac is powered.
-
My time machine is nor backing up. i get an error message "Volumes/Data-1/Colin's iMac.sparsebundle" is already in use. How do I get backups to recommence?
Restart the TC is usually enough.. restart the network if you need to.. in correct order.. modem,, TC.. Clients.. 2min gap.
Read other stuff. C12.
http://pondini.org/TM/Troubleshooting.html -
I am now getting an error message from Elementsautoanalyzer.exe, extendscript.dll not found. reinstalling the application may fix this problem. is there a fix for this?
TomCT60,
Is your MacBook using Mac OS X 10.6.8 as indicated in your post? If so you will not be able to fully integrate with iCloud.
iCloud and Snow Leopard, by Roger Wilmut describes what iCloud options are available for Snow Leopard.
If you are using Lion, go to iCal>Preferences...>Accounts, and delete/re-add your iCloud CalDAV server. -
After syncing my iPhone to outlook (via cord) I get an error message from Mobile Me. I don't even use Mobile Me. How do I get rid of it?
In your Uninstall a program control panel, uninstall the MobileMe control panel for Windows.
-
I'm trying to open a 900kb Word doc (240pages) in Pages but get this error message: Import Warning - A table was too big. Only the first 40 columns and 1,000 rows were imported.
Julian,
Pages simply won't support a table with that many rows. If you need that many, you must use another application.
Perhaps the originator could use a tabbed list rather than a table. That's the only way you will be able to contain a list that long in Pages. You can do the conversion yourself if you open the Word document in LibreOffice, Copy the Table, Paste the Table into Numbers, Export the Numbers doc to CSV, and import to Pages. In Pages Find and Replace the Commas with Tabs.
There are probably other ways, but that's what comes to mind here.
Jerry -
Util class to extract Data from Data base Table.
Is there any Util class to extract all records from Data base table into DAT file.For example(get all amployees from EMPLOYEE table in to employee.DAT )
What is a DAT file?
Anyway, this can be achieved using a shot of JDBC [1] and some business logic [2] to populate/group/concat the data together in a DAT format and writing [3] it to that DAT file.
[1] JDBC tutorial: http://www.google.com/search?q=jdbc+tutorial+site:sun.com
[2] Use your brains and things you ever learnt in maths and basic Java tutorials/books.
[3] I/O tutorial: http://www.google.com/search?q=io+tutorial+site:sun.com
Maybe you are looking for
-
HELP! My phone won't let me text or call people. I can't open any messages or send messages. It freezes, the screen turns white and then closes.
-
I have been using PayPal with I tunes since 08 with no troubles now when I go to any app free or not it tells me that this device does not support PayPal so I have contacted PayPal and have everything taken care of there my account is verified and no
-
The email that Itunes sent a password change no longer exists
How do I access a password change of my account if the email attached to it no longer exists?
-
Arch-0.6 How does one configure the kernel
Hi everone. I'm a new arch user (coming from gentoo) this is my first post here. I installed Arch Linux 0.6 on my computer. I have experience configuring kernels, but I'm not sure where to do this in Arch Linux. In /usr/src there is only a "linux' di
-
Required attribute in dsp input tag
Hi dsp:input tag is unable identify the required attribute if i keep like this <dsp:input bean="something" type ="text" required="required"/> but it is working if i keep like this <dsp:input bean="something" type ="text">