Where can I buy a Brand New Apple Cinema Display 30"?

Hi,
I Already posted my question in the older Display topic, but I'm not sure it was the good place, so I post it here. If it's not the good place, you can move my thread to the good topic. Thanks.
I'm looking for mounths to buy a brand new 30" Apple Cinema Display. I went to some Apple reseller/Apple Stores and each of them didn't really knew where I could buy it since it's discontinued. I can't believe there is no brand new 30" Apple Cinema Display lying around in some Apple Stores/Apple general center at Toronto or anywhere in USA.
I really want one of them, and I'm ready to make anything to get one (phone call etc). I would like to get some help of where I can call or where I can go to get what I want. The price doesn't really matter now.
Thanks!

Have you done google searches for it ("Apple 30" cinema display")? That's all I can recommend.
A quick google search turned up this page which apparently lists some new 30"s.
Note, I did not follow those links to see if "new" really meant "new".

Similar Messages

Where can I buy a brand new imac g5?

Hi do any of you know where I could purchase a brand new imac g5 from many thanks

This is is the iPad forum. Perhaps posting in one of the desktop computer forums may be a better option.
In any case an iMac G5 is the 2006 model of the All in one. Don't think new versions of those exist anywhere.
If you mean the Last gen Mac Pro (looked like G5 Power Mac) which is the predecessor to the new Mac Pro black cylinder: since apple no longer makes that version, but instead is making the New Mac Pros now, its probably going to be difficult to find a new G5. Unless a computer store happens to have left over inventory.
Price would tentatively be lower, but again finding one is going to be very difficult.

Where Can i buy a Brand New Logic Board for my Macbook Pro?

My Macbook Pro (Mid 2010 13") logic board got fried, so i was just wondering if possible, where i could get a new logic board. Also, would the new 2011 i7 logic board (if purchasable), for the 13" as well be compatible with the chassis/body of my mac?

Apple would be the main supplier of any replacement parts.

Where can I buy, in France, the X930C to display HDR video contents ?

Hello, Where can I buy, in France, the X930C to display HDR video contents, please ? Thanks Romuald

Have you done google searches for it ("Apple 30" cinema display")? That's all I can recommend.
A quick google search turned up this page which apparently lists some new 30"s.
Note, I did not follow those links to see if "new" really meant "new".

How Can I Test New Apple Cinema Display?

My new 30" Apple Cinema Display arrived today but the arrival of my MacBook Pro is still 4 weeks out (I ordered both at the same time for dual warranty purposes). I cannot hook this ACD to my wife's 12" PB and the only other computer that may have the ability is my daughter's new iMac Intel Core Duo (but I'm not sure if it will power the 30" ACD). I would like to test for stuck or dead pixels. Can I plug the AC cord into an outlet and no video connection then power on or will this show no pixel anomolies, or worse, cause potential harm to my display? Anyone? Thanks to all that may reply.
PS: I threatened to cancel my order unless the Supervisor allowed me time to evaluate the new monitor the full 2 weeks AFTER the arrival of my MacBook Pro, so I have plenty of time, just no computer to run the darn thing!
PowerBook G4 12" aluminum & iMac Intel Core Duo Mac OS X (10.4.5) Apple 30" Cinema Display w/ iLift LCD monitor arm

I think pretty much any Mac with DVI will drive the 30" ACD, just not at the native resolution. You will get 1280x800. But if you are just looking at a solid full screen of a single color, for the purpose of trying to spot dead/stuck pixles, the low res shouldn't make any difference at all for such purposes.

Hello everyone, hoping for some help with my new Apple Cinema Display 20"

Hi everyone, I bought an Apple Cinema Display 20 inch LCD monitor, just about 3 weeks ago. I have two issues I am hoping to get some help with.
1) I am using the screen on a PC with Windows XP, and I was very disappointed at the lack of PC support. I have no on screen display (OSD), so I can't see what percentage I have my brightness set to, and I can't alter the colour or contrast of the display, etc. Luckily it defaulted to very good settings, but I would really like to be able to use the (fan made?) program called "WinACD". If I would be best asking somewhere else, please direct me there. If not, my problem is that I installed it added the "Controls" tab, but it just says, Virtual Control Panel "None Present". I have tried googling for an answer, and I have seen many suggestions, but none of them worked. I installed the WinACD driver without my USB lead plugged in, and someone said that was important. So I have tried uninstalling, rebooting, then reinstalling it again with the USB plugged in, and a device plugged in to my monitor to be sure. It didn't seem to help. I have actually done this process a few times, just to be sure. So I would really like to get that working if possible.
2) I am disappointed at the uniformity of the colour on the display. I have seen other people mention this (again, after a google search), and that someone seemed to think it is just an issue we have to deal with, with this generation of LCD monitors. Before I bought this screen, I had an NEC (20wgx2), and it had a very similar issue. Most of the time, you cannot see any problem at all, but if you display an entire screen with a dark (none prime) colour, like a dark blue green colour, you can see areas where it is slightly darker than others. It was more defined on the NEC screen, and that is why I returned it. I now bought this Apple Cinema Display, because it was the only good alternative to the NEC. (It has an 8bit S-IPS / AS-IPS panel, which was important to me). But the problem exists in this screen too. It isn't as bad thankfully, but it still exists... I have actually tried a third monitor just to be sure, and the problem existed very slightly in that one, so I think I am probably quite sensitive in that I can detect it.
It is most noticable to me, because I do everything on this PC. I work, I watch films, and I play games. 99% of the time, I cannot see this problem. But in some games (especially one)... the problem is quite noticeable. When you pan the view around, my eyes are drawn to the slight areas on my screen which are darker, and it ruins my enjoyment. To confirm it wasn't just the game, like I said, I can use a program to make the entire screen display one solid colour, and if you pick the right type of colour (anything that isn't a bright primary colour), I can see the problem - albeit fairly faintly.
I am pretty positive that it is not my graphics card or any other component of my PC, by the way, because everything is brand new and working perfectly, and the graphics card specifically, I have upgraded and yet the problem remains - even on the new card. Also, the areas that are darker, are different on this screen than on the other screens I have used.
So basically, I would like to register my disappointment at the lack of perfect uniformity on a screen which cost me £400 (over double what most 20 inch LCD screens cost), and I would like to know if anybody could possibly suggest a way to fix it?
It is upsetting, becuase although this problem exists on other screens too, this is, as far as I know, the most expensive 20" LCD monitor available today, and uses the best technology available too.
p.s. If anyone would like to use the program that lets you set your entire PC screen a specific colour, it is called "Dead Pixel Buddy", and it is a free piece of software, made by somebody to check for dead pixels. But I found it useful for other things too, including looking at how uniform the colour of the screen is. That's not to say I was specifically looking for this problem by the way... the problem cought my eye.
Thanks in advance!
Message was edited by: telelove

I've been talking about this on another forum too, and I made some pictures in photoshop to describe the problem. Here is what I posted on the other forum:
Yes, "brightness uniformity" definitely seems to be the best description of my issue.
Basically it just seems like there are very faint lines down the screen, that are slightly darker than the other areas on the screen. They aren't defined lines, and they aren't in a pattern. It's just slight areas that are darker, and the areas seem like narrow bands/lines. Usually you can't see it, but in some cases, it is quite noticeable. It is mainly when I'm playing a game. The slightly darker areas are not visible, and then when the image moves (because I am turning in a car, or turning a plane, or turning in a shooter etc.) the image moves, but these slightly darker areas stay still, and that makes them really stand out.
As for how it looks, I tried to make an example in photoshop:
Original Image:
http://img340.imageshack.us/img340/3045/td1ja9.jpg
Then imagine turning the car around a bend, and then it looks like this:
http://img266.imageshack.us/img266/959/td2hq7.jpg
It's those lines in the clouds. If you can tab between the two images, you can see the difference easily. Imagine seeing those lines appear, every single time you move in a game. (I haven't tested this in movies yet, but I am assuming it's the same).
It isn't very clear on a static image. But when the image moves, the darker areas stay in the same place and it draws your eyes towards them. It isn't terrible, but it is annoying, especially consider how much this screen cost.
Message was edited by: telelove

Can I use my 2009 24" Apple Cinema Display I purchased in USA in Germany?

Hello All,
I'm moving from the United States to Germany, and am trying to figure out if I need to sell my relatively new 24" cinema display and purchase a European model, or if I can somehow switch the AC cable to a euro model (or use an adapter safely). Any thoughts?

Is it possible to get a Euro AC cord instead of using an adapter? Does the Apple Store sell these?
Thanks for your help. Given your response I'm assuming that with only an adapted AC cable on the display my MacBook Pro and my monitor should be happy drinking from a normal German wall outlet.

QuickSilver 2002 (M8493) and the new apple cinema displays

I desperately want to buy myself one of these beautiful displays on eBay but am afraid that it doesn't connect to my machine. Can anyone confirm that for me. I went here:
http://docs.info.apple.com/article.html?artnum=42739
and that made me think I have a ADC and VGA display connection. The new displays use a DVI Display Connection. Would I need to buy something else to connect the two? Currently I have a dinosaur 21: NEW MultiSync, from forever ago . . . .

Hi,
Welcome to the Apple Discussion Forums!
To connect an ADC video card to a DVI monitor, you need this adapter.
Regards,
Dave

"New" Apple Cinema Displays coming?

Any word on the rumor front of new ACD's coming out? Aside from the alleged 17" budget display, I've red some rumblings about new ACD's.
If they make them in black....count me in.
In general, I think Apple needs to make more things in black. Call me trivial, but how frakkin' good would the Mac Pro, the Mac Mini, MacBook Pro, and Cinema Displays liike with an anodized black aluminum enclosure? But obviously, the case color is not all that I'm interested in with the possibility of new monitors.

Obviously, HDMI and expanded inputs would be a nice thing.

Are there any iphone 4s that work with GSM and CDMA and other carriers?where can i buy it?are apple going to produce it?

Need to buy this kind of iphone 4s that can work with all the carriers exist

It doesn't support any Bluetooth profile that a Remote would need. But if your audio system has the A2DP Bluetooth profile, or it could be added, you could connect via that method and just keep the Nano in your hand.

Where can I buy a new iMac with Snow Leopard on it?

Hi Folks,
If I go to the Apple Online Store I can only purchase imacs with Lion on it. My software does not run on Lion. Where can I purchase a brand new iMac with Snow Leopard on it?

It is a little late in the game to find one at Apple, much less one from an Apple Reseller like Fry's or Best Buy. For example, late last year I found a new 2010 Mac Mini that was still on Snow Leopard at the Sacramento Fry's, but it was there last one.
Actually your best bet at this point in time, is to buy used from a private party or "yuck" reconditioned from a second hand reseller.
see > The Mac Store - Pre-Owned / Used Macs - Used MacBooks, Mac Pros & More
or > Used Macs & Apple Computers - MacBook Pros, iMacs & Cheap Macs - All Tax Free | PowerMax
and/or > Used Macs, Refurbished Macs, Buy and Sell - Mac of All Trades

Can I use a 30" Apple Cinema display with a new 27" iMac?

I have a brand new iMac(27-inch, Late 2013), OS X Mountain Lion (10.8), i7 3.5 GHz, 32MB RAM, 4GB NVIDIA. I will soon be upgrading it to Mavericks, if that makes a difference. My understanding is that the resolution on it is 2560 x 1440.
I'm looking at buying a used 30" Apple Cinema display. I'd like to use it with my new iMac. The only advantage for me would be that the 30" screen is larger and things on it easier to see (or so I'm guessing).
I need to know if the 30" Cinema display would work with my new iMac, and if it would, as I'm guessing, give me a larger, easier-to-see screen.
I currently have my new iMac connected to my old mid-2010 iMac as a target display (that old iMac has a minidisplay port--no Thunderbolt), and that works great. I just want a larger screen.
I called Apple support, and the tech rep wasn't sure it would work. He seemed to think that the 30" Cinema displays were made with different connections. Some had minidisplay ports (which he thought would work), and some a cord built into them that provided some other type of connection (that I guess would not work as far as he knew).
Can anyone tell me if this would work? Would my new iMac and its video card support the 30" Cinema display? Would the result be as sharp and good-looking as my iMac's built-in 27" display, but only bigger (which is what I'm hoping for)? Any advice is appreciated.
I don't yet know many of the specifics of the 30" Cinema display I'm considering. I know it is about 3 years old. And here is a picture of the back of it:

Yes, you should be able use the 30" Cinema Display with your new iMac without problems. You'll need a mini-DisplayPort to Dual-Link DVI adapter:
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter
I haven't had the 30" myself to test so I don't know if there any caveats. Perhaps someone else here will have personal experience.
Regards.

Where can I buy Lion?

I apparently waited too long and need Lion but now only Mountain Lion is available on the App Store. My iMac is not Mountain Lion compatible. Where can I buy Lion?

Call Apple Phone Sales: 1-800-692-7753
Message was edited by: hpr3

On/off Button and brightness buttons don't work in the Apple Cinema Display

I write you because I bought a new apple cinema display 20" a month ago and I have problems with the on and off button and the brightness buttons. Thew work sometimes. I think that te problem is windows XP but I am not sure. My graphics card is a ATI RADEON X800 GT Gecube 256 Mb DDR2.
Would yo mind telling me how can repair that? If I need something to repair o it is better to buy the new windows to avoid that problem.
Windows XP Pro ATI Radeon X800GT Gecube 256 Mb DDR2

Thank you very much. I didn't know this driver.
But the problem was when I was installing this driver, Windows said that it's imcompatible with windows XP.Is this normal? o I need to download a special edition for windows xp.

2008 Mac Pro and Apple Cinema Display 27"

Is there some sort of adapter that would allow me to plug the new Apple Cinema Display 27" with a 2008 Mac Pro? Or what change would I have to make to be able to work this out?

Adrian - did you end up getting an adapter and using it? I purchased the Atlona DVI to Mini DisplayPort Converter (AT-DP200) to connect my 2008 MacbookPro (with GeForce 8600M GT) to the new 27 in. Cinema display, and though it works, it looks a bit fuzzy in terms of resolution. Having read the response here about making sure it is a DUAL link converter, I was going to try to return it for the AT-DP400.
Then I read another thread on here that seemed to indicate that the AT-DP400 would not work at all with the 2008 Macbook Pro.
http://discussions.apple.com/thread.jspa?threadID=2585380&tstart=0
So now I'm confused. Just wondering what your experience is, if you ended up with getting the display and converter.

Where can I buy a Brand New Apple Cinema Display 30"?

Similar Messages

Maybe you are looking for