Where can I change the System properties permanently

Instead of
System.setProperty("name","new-value");
to change the system properties in run-time.
How can I change it in a config file? Where is it?
Thx.

Hai,
We can't directly set the system properties values using config/properties file. But, if you wish to use <b>Spring </b> framework, there is an option to load system properties through a config file.
Regards,
Loga

Similar Messages

Where can I change the buffer size for LKM File to Oracle (EXTRENAL TABLE)?

Hi all,
I'd a problem on the buffer size the "LKM File to Oracle (EXTRENAL TABLE)" as follow:
2801 : 72000 : java.sql.SQLException: ORA-12801: error signaled in parallel query server P000
ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-29400: data cartridge error
KUP-04020: found record longer than buffer size supported, 524288, in D:\OraHome_1\oracledi\demo\file\PARTIAL_SHPT_FIXED_NHF.dat
Do you know where can I change the buffer size?
Remarks: The size of the file is ~2Mb.
Tao

Hi,
The behavior is explained in Bug 4304609 .
You will encounter ORA-29400 & KUP-04020 errors if the RECORDSIZE clause in the access parameters for the ORACLE_LOADER access driver is larger than 10MB and you are loading records larger than 10MB. Which means their is a another limitation on read size of a record which is termed as granule size. If the default granule size is less then RECORDSIZE it limits the size of the read buffer to granule size.
Use the pxxtgranule_size parameter to change the size of the granule to a number larger than the size specified for the read buffer.You can use below query to determine the current size of the granule.
SELECT KSPFTCTXPN PARAMETER_NUMBER,
KSPPINM PARAMETER_NAME,
KSPPITY PARAMETER_TYPE,
KSPFTCTXVL PARAMETER_VALUE,
KSPFTCTXDF IS_DEFAULT,
KSPPIFLG MODIFICATION_FLAG,
KSPFTCTXVF VALUE_FLAG
FROM X$KSPPI X, X$KSPPCV2 Y
WHERE (X.INDX+1) = KSPFTCTXPN AND
KSPPINM LIKE '%_px_xtgranule_size%';
There is no 'ideal' or recommended value for pxxtgranule_size parameter, it is safe to increase it to work around this particular problem. You can set this parameter using ALTER SESSION/SYSTEM command.
SQL> alter system set "_px_xtgranule_size"=10000;
Thanks,
Sutirtha

Where can I change the font settings for the name of the month in iPhoto's calendar project?

where can I change the font settings for the name of the month in iPhoto's calendar project? I just ordered two copies of a calendar I designed in iPhoto and was surprised to find that the calendar's months were printing in something like an Arial 10 pt font. On previous calendars I've printer via iPhoto and Apple, the font was much larger. I've tried every menu option in iPhoto and the Calendar Project program and can't find where this is modifyable. Which leads me to ask, what the heck happened here in the first place? I did not consciously change the default.
I do remember that I got some notice when I first tried to print the calendar about the default font having been changed, but I don't know how this could have happened, and I didn't know what impact that had on the calendar until it was delivered. I typically print about a dozen annual calendars but won't buy another until I've got a handle on this problem. For the most part, the rest of the calendar is okay.
As a P.S. is there anywhere where one can get a power user's manual, or instruction on iPhoto?
Message was edited by: KPAausFrankfort

"Maximum" and "12" usually refer to compression (influencing image quality and jpeg file size in bytes); and as Curt wrote, dpi is meaningless for display by and viewing in web browsers. (It could be a different matter if you are uploading the jpeg files for someone to download from the web to print.)
What are the sequence of steps that you and your batch processing take from Bridge?
You can use call Photoshop's Image Processor from Bridge to create the jpeg files (Tools > Photoshop > Image Processor). In the Image Processor you can set jpeg compression, pixel dimensions if desired, also convert to sRGB (good idea for web display). In my experience the image processor leaves unchanged whatever dpi is set in the source file; or, if none there as might be for a pdf, it will set the dpi value in your New Document Preset Print Resolution (from your Photoshop Units & Rulers preferences).

Where can I change the default setting of H tags in dreamweaver cc?

Where can I change the default settings for the html Heading tags in Dreamweaver?

The customary approach is to style them yourself in your CSS. Or use one of the various CSS resets.
h1, h2, h3, h4, h5 {
margin:0;
padding:0;
h1 {font-size: 175%}
h2 {font-size: 150%}
h3 {font-size: 125%}
h3, h4, h5 {font-size: 110%}
Nancy O.

I have an Ipad 2 and the touch screen is cracked, where can i change the screen

Where can I changes the touch screen for mi Ipad 2

What does this mean?
Ipad don't buy parts for replace,
Apple does not replace parts. Again, they replace the iPad. Replacing parts yourself voids the warranty. Not sure when you bought it.

Where can I change the presets?

I recorded at 1920x1080 25p my videos do not fit in the sequence window, I guess is because this is set for 1280 x 720. Where can I change the presets for the project? I can't find it anywhere

Thanks to both for your answers... I´m working on the trial version of Premiere PRO CC, I´m not sure if I didn´t explain myself or I just didn´t understand your answers. The thing is that my video don´t fit in the secuence viewer, they´re bigger, as I was reading there´s a welcome screen, where you are suppose to write the format you want, but I don´t get that menu, when I open a new project. Does the size always have to be 1280 x 720?

Where can we change the Search term in the Sales ordder?

Hi,
Where can we change the Search term , Address group key , in the Sales order partner function
Br
Ranjan

Thanks Henrique for your response...
Here i wanted to know how to change any of the partner function's search term locally for a particular sales document (as search term is part of general data - address portion)
As you have suggested, that i have to make the changes in the customer master. But i want to change search term locally for a particular sales document
Hope my requirement is clear now
Br
Ranjan

Can we change the system date using Sql

can we change the system date using Sql statement..
can anyone help
Tariq.

There is an initialization parameter called FIXED_DATE which lets you set a fixed sysdate for testing purposes, and you can alter that date using the ALTER SYSTEM command, but as implied by the name you are setting a data/time that doesn't change. Since the normal sysdate is derived from the O/S it cannot be altered through SQL

I can not change the system sounds on my ipod example incomming mail is stuck on bell even though i have selected glass

I can not change the system sounds i have tried every thing but a reset,any suggestions

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How/where can you change the delimiters within the output file -Urgent Pls!

Hello Experts,
When Exporting data through EAS, how/where can you change the delimiters within the output file (ie. space delimited vs tab delimited vs custom)
Thanks in advance.
Regards,
Sonu

This is where I will be shot down in flames but at least in 7.x I am unaware of any configuration option that allows you to export in anything other than space delimited.
I guess you could write a shell/perl script that could change this outside of Essbase
Edited by: DrFosterMan on Jan 16, 2009 12:54 PM

How can I changed the system username and password

How can I changed the system username and password
Need help urgent

Paolo,
If I understand his requirement good (to have system user but must be called xxxx) then that's the option.
Well, that's obvious...Sure, but sometimes we see complicated thing but not something what is obvious...
Also your demonstration to OP how to change user password indicate that OP-level of knowing Oracle user management is such that OP maybe need help for something what is for you or me obvious...
Cheers!
Message was edited by:
Faust

Where can I change the style for a subtab?

Where can I change the style for a subtab? I can�t find the Style Element Property for this. I only want to change the text size (the automatic size is too large form my page)... can someone help me???????.. thanks

Hi there
Well, this is a yes and no answer.
Yes, you could change an icon, But no, RoboHelp won't make it easy. What you will end up doing is massaging the JavaScript code for the WebHelp output. This particular change isn't really for the faint of heart. Oh, and you would likely have to change it each time you generate your WebHelp output.
I would encourage you (and others) to consider submitting a Wish Form to ask Adobe to put this on their radar for a future version.
http://www.adobe.com/go/wish
Cheers... Rick

HT1263 where can I find the System Mac 9 that would be in the (original release) factory shipped iMac's prior to 2010? I'm missing key system data and cannot update to iPhoto app past 6.0.6; any advice will be helpful, thank you.

Where can I find the System Mac 9 that would be in the (original release) factory shipped iMac's prior to 2010? I'm missing key system data and cannot update to iPhoto app past 6.0.6; any advice will be helpful, thank you.

Where can I find the System Mac 9 that would be in the (original release) factory shipped iMac's prior to 2010?
What are you refering to here? Mac OS 9 came out around 2001 ( or about ). Mac OS 9 last run in an emulation mode in 10.4.11 -- Tiger. Mac OS 9 ran on PPC machines that were last produced before 2004 or so.
I think your conclusion you need Mac OS 9 is incorrect.
I'm missing key system data and cannot update to iPhoto app past 6.0.6; any advice will be helpful, thank you.
iPhoto '11, Mac OS X (10.6.8), need to upgrade system to 10.8
We need to verify some information. Are you really running 10.6.8? What hardware?
Here is how to find out what version of Mac OS you are running:
Click on the blue apple in the upper left hand of the screen.
click on this icon
Click on the first line, "About This Mac"
Most of these are numbers & that's what we want.
What version & Processor do you have?

Everytime my AppleTV2 enters into sleep modus it requests again the WIFI network password. This is new, where can I set the system to remember the password?

Everytime my Apple TV 2 enters into sleeping mode it requires my WIFI network password again upon reconnection. This is new, how can I set the system to remember the password?

Open Mail preferences, click on the Accounts icon in the toolbar then select your mail account, click on the Mailbox Behaviours tab on the right. Set the dropdown menu at the bottom for the Never option.
However, you cannot change the default options set for a newly created account.

Where can I change the default timezone UTC?

Hi,
I am working with the calendar and events to plan meetings.
The default for the time zone is UTC.
Have two questions:
1. Where can I change this default timezone for my login?
2. If a timezone can not be changed, is it possible to show the timezone behind the DateTime entries in the Overview > Calender view, when displaying in list form (like it is displayed in the month view)?
Thanks a lot
Volker

Volker,
The default timezone is set in bcentral.
Go to https://beehiveonline.oracle.com/bcentral.
Log in with your normal username and password
Click on the MyAccount link
Set the country and timezone as appropriate.
Phil

Where can I change the System properties permanently

Similar Messages

Maybe you are looking for