Where can i check in the real time monitoring tool if there are active calls in progress?

where can i check in the real time monitoring tool if there are active calls in progress? 

Hi
Selecting Call Manager -->Call Process ---> call activity
HTH
Regards
Carlo

Similar Messages

  • Where can i check for the latest version of Maps e...

    To be sure i always have the latest and most-updated recent maps, i would like to update Nokia Maps every once in a while. Where can i update my maps or check for the latest version?
    I now have version v2.0 wk39 b04.

    http://europe.nokia.com/explore-services/maps
    this is usually a good place to start. now maps 3.0 final beta has been released for the fp1 fp2 and v5th phones so yours might be there too. i can't tell you as you did not list your phone but this site should clear it all up for you.  
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • Real Time Monitor Tool - Charting

    Afternoon all,
    I am using RTMT 8.1 to monitor Call Activity on a specific H323 gateway within our voice network. I've produced the chart which is correctly showing me real time information over a period of a couple of minutes. However, I want to display the chart over a period of 24 hours.
    Do I need to change the polling rate to 30 or 60 minutes and allow the chart to run for 24 hours before presenting it? Is there any way of producing historical data on RTMT? Any help would be apprecaited.
    Regards, Jamie

    Hi Jamie,
    Indeed in RTMT itself you should be able to achieve it by setting in counter properties "No. of data points shown on chart" to 50.
    Next form Edit > Polling Rate. Set it to 30 minutes. Now it shown over 24 hours but with sample rate of 2/hour it may not really be useful.
    So it would be better to have a higher sample rate and use the "Start counter logging" option to log the results to a locale csv file. So you can review the data afterwards with permformance log viewer or with Windows permance (perfmon.msc) from that locale csv file. Though you would need to leave RTMT running to log this information.

  • Cisco Unified Real-Time Monitoring Tool Administration Guide

    Hello Pros,
    I am in process of upgrading CUCM from 8.6 to 9.1.2 and receiving "not enough disk space on the partition" error.
    The show status from CLI shows 13499216K free space but I don't understand why we are getting the error message. I tried FTP and SFTP, from GUI and CLI with no luck.  Do I need to start deleting files (traces, firmwares, etc..)? Even if I do so it wil free up the space in active partition and change nothing in my inactive partition as all thoses files are in my active partition.  Your help is very much appreciated.
    Memory Total:        4016964K
            Free:         161516K
            Used:        3855448K
          Cached:        1745416K
          Shared:              0K
         Buffers:           9216K
                            Total            Free            Used
    Disk/active         14410496K        2301468K       11960264K (84%)
    Disk/inactive       14410560K       13499216K         167512K (2%)
    Disk/logging        50179664K       18651876K       28937612K (61%)
    MK

    Hi MK,
    If the percentage of disk usage is above the high water mark that you configured, the system sends an alarm message to syslog, generates a corresponding alert in RTMT Alert Central, and automatically purges log files until the value reaches the low water mark. So, try lowering the high water mark value as well and then restart the Log Partition Monitoring service.
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/6_1_1/rtmt/611-rtmt-admin/rtalert.html#wp1270174
    HTH
    Manish

  • Where can I find within the iTunes Apps/photos/... which are unable to be updated on my iPhone when attempting to perform a sync.  I was told it is over 2,700 items.?

    I'm trying to locate within the iTunes App a location to identify what information is unable to be loaded / sync'ed with my iPhone.  I have over 2,700 items which were unable to be updated and I don't know why or where to findout what they are.  iPhone has no additional information.  Just indicates, look in iTunes for further infomration.

    Added information: the PowerMac's System Pref's > Network does not display a WiFi link.  It is connected to the base by ethernet cable and certainly has no problem reaching the internet and mounting the old PowerBook (OS 10.4.11) via WiFi address.
    But it still won't mount/share the new PowerBook (OS 10.8.2).
    And I still need to make this connection, and find a list of all the required settings & procedures to make it.

  • Can we use the AdventureWorks2008R2 data for the real time project.

    Hi,
    In our project we are trying to do the data scrambling on First name, last name and middle name...
    In the regular practice we use to update the names as
    First Name = FN+<PERSON_SNO>
    Last Name = LN+<PERSON_SNO>
    Middle Name = MN+<PERSON_SNO>
    The Problem is the names are not looking realistic, so I thought of applying some logic and updating our PERSON table names based on Person.Person table in adventure works.
    My question is can we use the AdventureWorks2008R2 data for the real time project. Is there any cop right issue.
    Someone please help me solve this issue.
    Thanks
    Karthikeyan Jothi.

    Please read this link content:
    Adventure Works Sample Site
    sqldevelop.wordpress.com

  • From where can i down load the free Bootcamp programme?

    From where can i down load the free Bootcamp programme?

    Hi bulldog,
    it's called 'Boot Camp Assistant' and is part of macOS install. Should be in the: HD/Applications/Utilities folder.
    If you don't have it you need to re-install your OS...

  • What is the sql query for the real time reports Resource Stats?

    Does anyone know what the query is that the real time report tool uses for the Resource Stats page?  Trying to develop a custom report that displays similar information that is updated regularly.

    Hi,
    009 wrote:
    Hi Frank,
    Just wanted your opinion on the above given SQLI'm not sure I understand it.
    I added some more formatting to help me read it:
    SELECT      A
    ,     CASE WHEN LAG(A,1) OVER (ORDER BY A) IS NULL
              OR A=LAG(A,1) OVER (ORDER BY A)
              THEN LAG(B,1) OVER (ORDER BY A)
         END B_LAG
    ,     B
    FROM     (
         SELECT A, B
         FROM
              SELECT '1'A,'Apple' B FROM DUAL UNION ALL
              SELECT '1'A,'cat'B FROM DUAL UNION ALL
              SELECT '2'A,'bat'B FROM DUAL UNION ALL
              SELECT '3'A,'rat'B FROM DUAL UNION ALL
              SELECT '2'A,'yellow'B FROM DUAL UNION ALL
              SELECT '1'A,'pin'B FROM DUAL
         CONNECT BY PRIOR A=B
         ORDER BY A
    );What is the purpose of the CONNECT BY in what you have so far?
    Is the idea that you will add another CONNECT BY query, using
    CONNECT BY  b_lag  = PRIOR b?
    Do you think that will be better than using ROW_NUMBER?
    Will it work if (a, b) is not unique?

  • Prime infrastructure 2.0 Real Time Monitor?

    Hi everyone,
    I install PI 2.0 and I want to know how can i configure and use the Real Time Monitor option?
    thanks

    Hello Dawit,
    Please check the following link, might be helpful,
    http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/2.0/configuration/guide/mon.html

  • How can I Know the real time of my 24p project?

    I made an animatc as part of planning a 7 min animated video on Premiere Pro using a 24p project, trunsting that my ruler is set to 24 fps and that the time displayed was the real time of the video (not the NDF time), since there was no indication on Premiere's create sequence window that the ruler was on NDF basis. (When you cerate a new sequence,on the new sequence settings window you set the timebase as 23,976, but the ruler is shown as 24FPS, no indication of drop or non drop frame.)
    Recently I Had to export a 29,97 version of my project, and it was in fact 14 frames bigger. So I concluded that my time ruler was also showing me a NDF time not the real time of the video.
    Is there a way of creating a 24p project, with a ruler that gives me the real "clock" time? Or any Formula to "convert" a NDF time to DF (real) time, so I know where, on an NDF ruler, do I have  to stop to have a 7 min video?
    Thanks in advance
    Mauricio

    I think the best you can do is use the System Information application (Utilities Folder), looking in the wireless section.
    charlie

  • Can't download the latest iTunes. A window pops up... The update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs. No iTunes now.

    Can't download the latest iTunes. A window pops up... The update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs.
    Now, iTunes won't launch and can't be updated. Please help.
    If I have lost my music collection I will be switching platforms ASAP. It is insane that Apple has updates seemingly every day for their products.

    I was in your same situation with 14 downloads and 14 attempts. 
    You have to make sure that your Mac is booting into 64 bit mode.  You can make sure of this by going into System Preferences and scrolling down to 'Software' and making sure that you are booding with 64 bit Kexts. 
    If not, restart while holding the 6 and 4 keys down until you see the spinning gear wheel and try installng again. 
    BUT, what I also did was to go into Applications, click on the Lion installer, Get Info, and give yourself custom priviliges to Read And Write. 
    I did this simultaneously, and I don't know what function did it, but it worked for me, with no further downloads of the installer. 
    Good luck! 

  • HT5622 there is monthley fees going off my credit card, where can i check what excactly is it for, on the bank statment it is not spesified ?

    there is monthley fees going off my credit card, where can I check what that is for, it is not spesified on the statments, and do I pay monthley fees for certain apps that I downloaded even if it is for free

    To view purchase history >  iTunes Store and Mac App Store: Seeing your purchase history and order numbers
    No charge for free apps unless they are an in-app purchase. Meaning the app itself is free but the subscriptions are paid > iTunes Store: About In-App Purchases

  • Where can I check the SAP Portal version is EP 7.0 or not?

    Hi Friends,
    Where can I check if my SAP Portal version is EP 7.0.
    I tried to look in Component Information: http://<hostname>:portnumber/sap/monitoring/ComponentInfo for this information but cannot track any specific information.
    Can you please guide me in identfying the exact component and details associated to look out for,

    I'm not looking to download just the update (I've already done that). I want to download the whole thing, in order to make a self-sufficient bootable full reinstallation flash drive for my 2011 MBA.
    Yeah, you are supposed to be able to use internet recovery, if the worst happens. But there are even more worse case scenarios for which it is infinitely desireable to have an independent resource, such as a Flash Drive with all the tools one needs. I have this for my 2010 MBA, as the older 11A511 build works fine to create a complete flash boot/reinstall drive.

  • ESS MSS BP download location and where can i check the appropriate BP

    Hi Everybody,
    I just want to know the location from where i can download the ESS MSS BP for fresh deployment.
    And also the place where can i check the appropriate BP version for my landscape.
    Also pls let me know the total list of components to be deployed for ESS MSS implementation.
    thanks in advance.
    Regards,
    Ravi

    Hi Ravi
    Try
    service.sap.com/swdc
    Path for downloading XSS files:
    -> SAP Support Packages
    -> Entry by Application Group
      -> SAP Application Components
       -> SAP ERP
        -> SP ERP 6.0 (version dependant)
         -> Entry by component
           -> SAP XSS (Self Services)
    XSS software components:
    SAPESS SAP_ESS 600
    SAPMSS SAP_MSS 600
    SAPPCUIGP SAPPCUI_GP 600
    Path for downloading Business Packages:
    -> SAP Support Packages
      -> Entry by Application Group
       -> SAP Application Components
        -> SAP ERP
         -> SP ERP 6.0 (version dependant)
          ->Entry by component
          -> Portal Content
    Business Packages:
    BP_ERP5ESS 1.0
    BP_ERP5MSS 1.0
    BP_ERP5COM 1.0
    This will vary depending on target versions for example EHPs have a different product path and EHP4 has a different
    location entirely called "Portal Content Self Services"
    For landscape version please see the following notes
    761266 - XSS Self Service Patch Dependancies ERP2004 - follow the stack
    908569 - XSS Dependancies ERP2005
    1359937   EHP4: Further considerations for ESS/MSS         
    1303362   ESS and MSS and Enhancement Packages 1,2,3    
    Or indeed the combinations are listed at www.service.sap.com/scl
    Best wishes
    Stuart

  • How can I save/write data on the hard disc of the Real-Time System?

    I would like to acquire huge size of data via LabView Real-Time System.
    Since data is so huge, I am now thinking that it might be good idea to
    write/save data on the hard disc of the Real-Time System first and then
    transfer the data file to a data processing PC using FTP etc.
    If you know how to save/write data on the hard disc of the Real-Time System
    (Ver. 7.1), please let me know.
    Thanks,

    Just to add to Aitortxo's good answer,
    Since you have only one Drive ( C:\) on your RT, just keep monitering the availible disc space.
    After every few set of file writes keep transferring Backups delete these files, so that you  keep C:\ drive space for running your applications.
    Regards

Maybe you are looking for

  • Error when exporting a pdf in SAP

    She sends me the error when exporting a pdf from the SAP system, this is the message: X Object reference not set to an instance of an object. I hope I can support. Annex image

  • Problem in Leave Request

    Hi, We are using EP 7.0 , ECC 6.0. when an employee is requesting leave, the request is not going to the substitute but it is going to the manager who is in leave. I haven't worked on ESS/MSS.  How and where can i check for the problem? and how to re

  • Slides and flicker

    A friend who is more experienced at final cut pro suggested that instead of using Fotomagico to turn a slideshow into a movie that I use the ability of final cut pro to integrate my slides into my movies. My first attempt went badly as there was a lo

  • What's the best material for iphone 4 case? Silicone or Hard?

    for protective purposes.

  • HtmlToPdf Error (ALC-PDG-015-013-Acrobat cannot open the file. Please ensure that it is not password

    Hello, We have LiveCycle 8.x with jBoss. It works ok. The server (Windows 2003) can browses to the link, but the link gives error in the LiveCycle Console Admministrator when I use the "HtmlToPdf" service. JBoss service is started like Local System.