Where can I find a 2.5" 100GB 7200rpm SATA Hard Drive with 16MB cache?

Are there any out? If so where?

I've not seen any with a 16MB cache, but here are a few models with an 8MB cache.
Joe
iMac Intel Core Duo 20", 2 GB RAM, OWC 300 GB FW HD Mac OS X (10.4.7) MacBook 2GHz, 2GB RAM; iPod w/ video 30 GB

Similar Messages

Where can I find the files using up my external hard drive?

I have a 1TB iMac and have two external hard drives attached to keep the computer free of hard drive use for two reasons: Disk 1-is a 250GB hard drive I have dedicated to perform Time Machine backups of my home folder. Disk 2-is a smaller 120GB hard drive I keep my compete iTunes library of music in case the computer has a malfunction, so all the work I've done putting the library together will be secure. Here's the thing...the iMac's hard drive is hardly used, just as I want containing about 150GB total. Meanwhile, the Time Machine disk is nearly full with 225GB used, and just 25GB remainibg. The hard drive with the iTunes files looks pretty good too using about 70GB of it's 120GB. I believe Time Machine is in no way, backups the iTunes library just the iMac.
How can I figure out where the additional space is getting used up on that disk? I do have a couple of extra logins I use for alternate use such as a different iPhoto library I want kept seperate from mine, but I did not think the backup was saving those files as they are not even under the Time Machine setup.
Can anyone advise why the backup is larger than the use of the computer? I knew when I dedicated a smaller hard drive to back up a larger one that it was possible the backup drive would get too full, but I can figure out what's happening. I've erased the Time Machine disk and allowed it do a completlely new backup and again, it's always sigificantly larger.
Thanks!

Okay...I have some more information and perhaps we are getting closer. On the 250GB, first I went into that disk and used Disk Utilty to re-format it once using Mac OS Extended (Journaled) then a second time, zeroing it out. I did a screen shot to review if needed, and both times it looked perfect...249GB available. Then I went into the Time Machine preferences to get ready to backup again, and it had not excluded the other external 120GB with iTunes so I excluded it. I may has previously, never noticed in that screen that it takes a bit of time for it to calculate the information to save. I may have just clicked on it quickly without reviewing it first. Today I did, and gave it time to calculate. At one point the actual 250GB itself, showed up and I excluded it too like the 120GB. After it finished, the calculations are still it wrong - claiming it has a 200GB backup when the iMac either contains 150GB (based on when I do Get Info) on it or from OmniDisk which calculated about 100GB. I have not allowed Time Machine to do a backup yet, until this discrepancy can be clear.
One thing that I thought I had seen or reviewed previous on the Time Machine settings was my home folder - I could be wrong but wanted to mention that. Another little tidbit to ponder an well is that I have a files of icons that I use for the Hard Disks, and a few folders where I Get Info on the Icon and on the destination and just cut and paste. I did that today to the 250GB after zeroing, but while I was in the Time Machine settings the change was deleted and neither the manufactures icon was there nor mine, and it has the default blue-green one the software uses. I know, because my sister's is that way on her system-unchanged.
Feedback?

Where can I find the cs6 download? I understand it comes with the CC subscription.

Where can I find the cs6 download? I understand it comes with the CC subscription.

In the creative ccloud app, choose filters and versions. You can download from there.
How to Install Previous Versions of Creative Cloud Apps

I get the "Fast Browser Plugin not loaded" message every time i run safari and I can't find an MTWB folder anywhere on my hard drive?

I get the "Fast Browser Plugin not loaded" message every time I run Safari and I can't find an MTWB folder anywhere on my hard drive? This doesn't seem to be causing a problem, but is a puzzle?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

My disk utility option to turn off encryption does not highlight so I can't turn off the encryption of my external hard drive with time machine back up

I have an iMac and Retina MBP. I use Time Capsule for backup of iMac and I wanted to use an external hard drive attached to time capsule as time machine backup. The problem is that I encrypted previously that external hard drive and now Time Capsule does not recognize it.
When I try to turn off encryption with Disk Utility, that option is not highlighted so I cannot use it.
I tried with terminal but it answers The given UUID is a not a CoreStorage Logical Volume UUID

Can you plug in the hard drive directly to your MBP and then decrypt the hard drive? You should be able to do this by opening up Finder and then either right clicking the hard drive (holding down two fingers and clicking) or holding down ctrl and then clicking on the hard drive.

Can I install windows 8.1 from windows ssd hard drive with bootcamp?

I recently bought a 2009 macbook pro wiht Maverick 10.9. I had a PC running W8.1 on a crucial ssd. The ssd is working fine, it was the motherboard that was broken. I was wondering if I could image a partition on the macbook with the image software crucial provided to install W8.
Any input can help
Thanks

Instead of trying to copy the Windows copy you have on the SSD to the internal hard drive, what I would do is to buy a USB to SATA hard drive and connect the SSD to the Mac through the USB port, and then start up your Mac from it if you need to use Windows 8.1. To do it, hold the Option (Alt) key while your Mac is starting up.
Apple does not support Windows 8 on the 2009 MacBook Pro, so you may have some problems with the trackpad and function keys

U410 ultrabook: Can I defrag hard drive with SSD cache?

Hi,
I would like to know if I can defrag my hard drive with 24G SSD cache. I heard that it would be bad to defrag the SSD part so I would like to defrag the regular hard drive portion only (1TB). I right clicked the drive but I see four drives and can't tell which one I should defrag. It looks like the first c drive is the one, but I am not sure. Any comments would be helpful. Thanks.

You are right that by default, drives are set to be defragged automatically. But you can also do it manually and when the date of the task is not yet due.
Re ssd, are there permanent files in that drive? By permanent, I mean data, programs, etc.. Not the temporary files used by runned programs and the system using the caching process.

Where can I find the archive feature on iPad, it's not with my email and I want to try to sinc my contacts from Verizon.

I'm new to to iPad,and trying to get my Verizon mailbox folders into mail, it says once I turn on archive &log into my vz mail it will sinc the folders into mail but I can't find the archive option to turn it on?...help!

What did you rent the film on, your iPad or your Mac ? If you rented it on your iPad then it should have downloaded into the Videos app on it (you should get a rentals tab in the app). If you rented it on your Mac then it should be in the Movies part of your Mac's iTunes library, you will have to connect your iPad to your Mac's iTunes and move it from your Mac to your iPad (I think that it should show on the iPad's Movies tab for moving)

Where can I find a version of GarageBand for a MacBook Air with lion 10.7.5 as the OS? Thanks

Where can I locate GarageBand compatible with lion 10.7.5. It got wiped from my MacBook Air and would like it back thanks

Buy an iLife 11 DVD from a source such as Amazon or eBay.
(110328)

I-tunes can't find songs in library on new external hard-drive

My Western Electric hard-drive died and I purchased a new Seagate external drive. I moved my I-tunes music library with all my songs to the new drive and changed the location of my library in I-tunes. When I open I-tunes it can't find any of my songs. There is an ! in front of every one. The locaction of the music folder is set correctly in I-tunes and the songs are all still there. I can individually locate the songs and they play fine but this isn't practical for a 10,000 song library. I think the problem has something to do with the auto-backup software that came with the Seagate. It creates a series of directories and hidden files when doing a back-up. I can't sync my I-pod because I'll lose my whole libarary since I-tunes can't find the songs. Help.

All of my several thousand mp3s are on an external HD, and i-tunes just comes up with an exclamation mark next to each of the tunes saying it can't find the original file.
Have these always been on the external and they were previously working?
I've changed the i-tunes music location to my external HD (F drive) in preferences
If you moved the music yourself, this will simply tell iTunes to use that location for anything in the future. It will still look for everything in iTune in teh location it was at before.
and consolidated the library,
Consolidating will copy everything in iTunes to the location you set in iTunes prefs -> Advanced - iTunes music folder location.
If you moved all the music from that location then consolidated, there is nothing to move, since iTunes will be looking for music in the original location.
Does anyone have any idea how I can get i-tunes to relocate all of my music files
Let iTunes relocate them. You do not relocate them.
Do this...
Quit iTunes.
Move all the music back to the original location. Don't leave the music there as iTunes will simply duplicate it at that location when you consolidate.
Open iTunes.
Make sure iTunes prefs -> Advanced is set to the external where you want it.
Then File -> Libary -> Consolidate.

I can't find my user account photo on my hard drive.

I can't find the photo I took of myself with the iSight camera of my iMac, which is used in my user account, on my hard drive.
When I go to System Preferences, Accounts, and click on the photo next to Change Password, a drop down window appears. In this window, I can either choose one of the images that came with Leopard as my icon, or I can choose "Edit Picture"
When I choose "Edit Picture" another drop down window opens. In this window I can edit my image a bit by moving it around and/or making it larger or smaller. I can also choose "Recent Pictures", which gives me a list of recently used pictures, that are different from the default icons.
Another option is to click on the button "Take a video snapshot", which bring up a count down, and then takes a snapshot with the iSight camera. Once that picture is taken, I can hit "Set", and I have a new account icon.
The last option, "Choose", brings up the Finder, which then allows me to choose any picture I want, as my account icon.
I have not been able to find the picture on my hard drive, that the option "Take a video snapshot" takes. There is no option presented to give that picture a name either at the time you take the picture, which would make it easier to find. It is not in the Photo Booth folder.
BTW, the same picture is also used in my file in Address book. And here the same thing is true. I can't find the location on my hard drive where this picture resides.
Does anyone know?

Hello Abrasha Staszewski
I can't find the photo ... used in my user account...
Look in your Mac's Hard drive / Library / Caches folder. (NOT your "User" Library)
It will have a filename like this: com.apple.user501pictureCache.tiff
The "501" part may be a different number if there are multiple users on your Mac.
You can save a copy of this file in your Home / Documents folder if you like, but do not delete, rename, or move the one in the Hard drive / Library / Caches folder.
Your user account file "belongs" to OS X, and it is part of the info OS X manages and updates for you. Unless you are an experienced OS X user, I advise against manually changing, moving, or deleting files outside your Documents folder without specific instructions from someone who KNOWS that it is safe to do so. Let OS X and your applications manage the file system.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

How can I find my iphoto pictures from a recovered hard drive.

My macbook pro suffered an attack of spilled wine. Its unrecoverable as smoke and flashes were seen when it was powered up afterwards. I removed the hard drive to recover all my files but I can't find the file with my iphotos library in it. How can I find it or where should I look

It actually helps if you provide details first - your original question was how to find your photos - now it turns out that you knew where they were but were trying to open the library with an older version of iPhoto
older versions of iPhoto can not open newer libraries - iPhoto library manager can rebuild a library for an older version
Or you can copy the originals (or masters depending on the version of the newer iPhoto which you do not share) folder to the desktop and then create a totally new library using just the photos
LN

Iphoto 11 on MT Lion can not find my iphoto library after a a hard drive replacement and restore from time machine...HELP

I have an iMac with the recalled seagate drives and I have everything backed up on Timecapsule and on Carbonite. I also copied all my photos to a file prior to having the hard drive replaced. The merge back to the mac worked well except that now iphot can't locate my library. In iphoto 11 they moved it out of the pictures file and it is hidden. Does anyone know how to find it so I don't have to reorganize 20,000 pictures?
Thank you!

In iphoto 11 they moved it out of the pictures file and it is hidden.
They didn't, I'm afraid. The iPhoto Library is still stored in the Pictures Folder by default, and it's not hidden.
Can you see it in Time Machine?

Can I find my Firefox profile on an external hard drive?

My old laptop was damaged but I managed to save my hard drive. I now have that hard drive plugged in as an external drive on a new computer. I need to restore the bookmarks from my old profile. However when I type %APPDATA%\Mozilla\Firefox\Profiles\ in Search (Windows 7) it only searches the C Drive. How can I locate the profile folder and especially the places.sqlite file on the external hard drive that has the data saved from the damaged computer?

Go into Computer, then find the drive there (it won't be labeled C, it will be something else under Removable storage), navigate to %APPDATA%/roaming/mozilla, etc. to find your profile.

IPhoto 5 can't find my pictures after installing a new hard drive.

I had a corrupted hard drive which I was able to get going again with Disk Warrior. I backed up my i Photo Library on external storage and then installed the new drive and reinstalled OS 10.4.10 on my old G4. I then installed iLife 05 and tried to open iPhoto. I got an error message stating: "You can't open your current iPhoto library using this version of iPhoto".
After I read the iLife 05 missing manual I found out that you shouldn't save iPhoto files this way. I can't imagine having to burn DVD's in order to save picture files. What ever happened to "it is intuitively obvious on the Mac".
Is there any way for me to recover these picture files? I downloaded an iPhoto library manager but that was no help. Is this file recovery problem easier with iLife 08? I am getting a new iMac later this week with iLife 08 available with it..............donn

Problem solved
I moved all of the iPhoto files into trash and then restarted the machine and reinstalled iPhoto 5. I used my oldest iphoto library file and everything worked. I was a little surprised that the install program was not more selective in picking up a library file.
Everything is working fine now. Thanks for your help....donn

Where can I find a 2.5" 100GB 7200rpm SATA Hard Drive with 16MB cache?

Similar Messages

Maybe you are looking for