Where can I find a PUK Code

hey I need a puk code...where on my Verizon should it be

It's in the My Device section of your on-line MyVerizon account.

Similar Messages

  • Where do i find my puk code number?

    where do i find my puk code number? i've had this phone for 2 years and i have never set up a puk code, now i cant access my phone or make outgoing calls and i dont know if i can accept any incoming calls, and my phone was just upgraded yesterday, the look is totally different what do i do
    <Shortened the subject line for more exposure.>
    Message was edited by: Verizon Moderator

    The PUK code is required when the sim card password has been inputted to many times...   You can go to https://login.verizonwireless.com/amserver/UI/Login?realm=vzw&goto=https%3A%2F%2Fnbillpay.verizonwireless.com%3A443%2Fvzw%2Faccountholder%2Fservices%2FdisplayPinPukInfo.action and click the option to reset PUK and put in the number that the phone shows you for your card and it will give you a default unlock PUK code for your device.

  • Where can i get my PUK code?

    where can i get my PUK code?

    Hi You need to contact your network service provider For your PUK CODE. Cheers Brian

  • I purchased an itunes gift card for my nephew. I received a confirmation that the credit card had been debited, however he never received a code to activate his gift. Where can I find out the code for my gift voucher?

    I purchased an itunes gift card for my nephew. I received a confirmation that the credit card had been debited, however he never received a code to activate his gift. Where can I find out the code for my gift voucher?

    If you purchased your gift using iTunes, you can resend it. Just follow these steps to resend an unredeemed gift to any address:
    http://support.apple.com/kb/HT1541

  • Where can I find the coupon code required for registration?

    Where can I find the coupon code required for registration? I purchased the design standard at Officeworks in Australia and given the box a thorough check, but unless there is a number not labelled 'coupon code', it's definitely not there. I am using this product personally and not for business so I have no IT dept to assist.

    Find a serial number
    For anything else contact support directly or work things out with your reseller.
    Mylenium

  • Where can I find the source code of the sshr workflow source file?

    Dear all:
    Where can I find the source code of the sshr workflow?
    Regards
    Terry

    Dear all:
    I found the answer, usually the workflow of the self-service 4.1 is HRSSA
    Regards
    Terry

  • I purchased the Microsoft Office last September at an Apple Store. I recently had to bring my MacBook Pro back to the store because of some issues. Reboot caused me to lose Office and I no longer have the passcode. Where can I find my duplicate code?

    I purchased the Microsoft Office last September at an Apple Store. I recently had to bring my MacBook Pro back to the store because of some issues. Reboot caused me to lose Office and I no longer have the passcode. Where can I find my duplicate code? I no longer have the receipt so I can not call the business to find my duplicate code. Looking back at my bank statements, this purchase was quite spendy so I hope I will not have to purchase it again if possible! Any advice would be great!

    It should be on a stickerthat says product key on the inner sleeve inside the bos which the disc comes in.

  • Where can I find  the source code of cachedrowset

    I want to read the source codes of cachedrowset and other classes in rowset.jar .
    where can I find it?
    thanks

    download rowset.jar a JAVA Decompiler tool , for example cavaj,then get the source code

  • Where can I find the field "Code" in PPOMA_CRM? what table?

    Hi Experts,
    I need to extract the Organizational Structure from PPOMA_CRM to BW. I know HRP1000 and HRP1001 are the main tables related to this transaction code, but I think they are not enough to suit my requirements.
    My OS tree is: Country->Region->Plant->Centre-> "X" number of Sales_Rep, and "Y" number of Sales_Admin
    I have to count the number of Sales_Resp and Sales_Admin assigned to a specific Plant or Region. So if I want to know my salesforce (sales_rep+sales_admin) in the North Region, I should sum all sales rep and sales_admin included in Plant01, plus Plant02...etc.
    It would be "easy" if I could sum all the "S" types included in a Plant or Region, but I can't, because there are more "S" types in the Organizational Structure that I should not take into account (sales director, plant manager, etc).
    "Code" is the only way to differenciate among the "S" types, because when a person is Sales_rep or Sales_admin, "Code" is SR or SA. But this field is not included in HRP1000 neither HRP1001. Do you know where can I find this code or what tables I should have a look to suit this requirement?
    I attach an image. We can see a Plant and a Centre, and according to my requirements, forcesales for this Plant should be "2" (there are 2 sales_rep and 0 sales_admin) .
    Any help will be appreciated. Thanks!

    Hi,
    You may want to check table HRP1000, field SHORT.
    Best regards,
    Sylvain AGUETTAZ

  • Where can I find "Crystal Type" code examples?

    Morning all,
    I have tried searching the forums but cant find much (I dont find the search thread function very helpful but that might just be me and is another story for another time).
    I am trying to create my own formulars and functions on my report in CR4E, but I am have problems with the code.
    Where can I find a tutorial on the basics like converting a date to a string or delcaring a date or changing a string to a date.
    In Java one would do something like:
    String str_MyString;
    str_MyString = "This is a string";
    but in a crystal report you do something like (and I might incorrect in even this simple example):
    StringVar str_MyString;
    str_MyString = "This is a string";
    That slight difference of String and StringVar are the things I need to find out.
    In VB I can refer to a forms fields with str_MString = me.txt_Field1 but in crystal I dont know how to refer to a current field of the report I am working with.
    For example, I have a text box on my report which I have called "txt_MyNumber", I then want a formular or function to use the value that is found in that text box but cant work out to refer to it. I can refer to other formulars but not report fields. Is this even possible?
    I know the report field question might be viewed as a whole new question thus thread but I feel they close enough to remain in the same thread.
    So any help pointing me in the right direction.
    Or am I just an idiot and should rather give up trying to design crystal reports. (Ive been thrown in the very deep end at work so am trying to work everything out all at once with no beginner knowledge)
    Thanks all for help and suggestions.
    Cheers
    Darren

    Thanks for the quick reply, Alphonse 
    Creating a UFL is what brought me to realise I am lacking in knowledge in the first place.
    I created a UFL that converts numbers to words. I am going to be using this later for translating
    transaction amounts into words in different languages.
    As a test I created a simple resource bundle that held 1=one, 2=two and so on until 10.
    My function is
    get_numbers_to_words(String key, String resBundleName, String str_Locale)
    So to test it I created a formula on in my report and used the following bit of code to test it.
    str_Number_to_Words  //formula name
    get_number_in_words("1", "NumbertoWords", ContentLocale)
    This works and gives me a return of "one".
    So I then wanted to have a field on the report pass in the key. The field is called txt_Number, so i tried:
    str_Number_to_Words  //formula name
    get_number_in_words({txt_Number}, "NumbertoWords", ContentLocale)
    but clearly that did not work. I tried many other variables or ways of putting the value I hold in the
    txt_Number field.
    I have no way of using the value held by the text box txt_Number.
    I then thought if I cant get a field to drive the key I will use something as simple as taking the current time
    and use the seconds unit digit as the variable to dynamically change and gives more a better testing
    ground so when I expand to the double figures I can use the seconds in general.
    This is what made me put up this post.
    With your first link you sent me, I am ashamed to say I dont really know how best to take that knowledge
    and put it in practice. This is where my lack of knowledge shines through. I understand what most
    methods and classes do from their descriptions and summaries and all that. But I am trying I promise.
    All I need is for one example to be shown and explained how the concept gets taken from those Package
    descriptions and into a working example I will be able to then work out how to use it for all the rest.
    Take com.crystaldecisions.reports.common.value.DateValue for example.
    If this last request is a silly request and a real waste of everyones time I totally understand and will start
    looking other ways of learning this all. I will not hold it against anyone if they tell me to go back to "school"
    and leave programming to real men/women.
    Thanks Alphonse and also the rest fo you.
    Cheers
    New Edited part:
    OK I am sort of getting somewhere. I have now got a function that can return the current time as a string
    but the part to return only the seconds is not working.
    Minutes_To_Number    //Function Name
    Function (TimeVar curr_Time)
    StringVar str_Minute;
    str_Minute = CStr(Second(curr_Time));  // This does not seem to be returning the current seconds. Why?
    //str_Minute = CStr(curr_Time);  //If this is not commented out I get the current time, so I know its working
    str_Minute;
    Var_Number      //Formular name
    Minutes_To_Number(PrintTime)
    str_Number_to_Words   // Formular that I want to get working
    // I want to pass the seconds into the Key field of my UFL function.
    get_number_in_words({@Var_Number}, "NumbertoWords", ContentLocale)
    Any ideas why the
    Second(curr_Time)
    does not return the seconds value?
    Edited by: Darren Jackson on Sep 19, 2008 3:36 PM
    Ok I have managed to work out why my code was failing.
    It all boiled down to my use of "=" and not ":=". This being the type of Syntax differences I need to learn. Well guess I will just have to go through all the Example reports (found them after asking).
    So Im going to close this thread as worked out the answers.
    Cheers
    Edited by: Darren Jackson on Sep 22, 2008 2:43 PM

  • Where can I find the install code from when I purchased Mountain Lion?

    Going to get a new hard drive, my local store said if I could provide the install code for Mountain Lion that they would only charge me $20 to install the OS on the HD.  How can I find the install code when I purchased it.  I bought it Nov. 2012. 

    That's only applicable if you got Mountain Lion through the now-discontinued free upgrade program and haven't redeemed the code for it.
    If you bought it from the Mac App Store or have redeemed a download code for it, log into it with the Apple ID and password associated with that copy of it, click on the Purchases tab, and redownload it from there.
    If you got it with a new Mac, start it up with the Command and R keys held down and reload it from the recovery partition.
    (80260)

  • Where do I find my PUK Code for my PAYG T-mobile Samsung Galaxy S5

    Cannot find where my online PUK Code for T-Mobile is - the explanation on EE's page is next to useless!  As I can't currently use the phone - I'm in a jam!!!

    Look in your online a/c under Manage Device.

  • Where can I find the Product Code for Windows Office Home Edition after a recovery? Without disk.

    I had to conduct a Factory Recovery on my notebook.  Everything loaded correctly.  When I opened Windows Office Home Edition it asked for a product code.  I don't know where that is located, it came already installed on the computer.  I looked through the original paper work that came with the laptop and can't find any information.
    Please help, I have much work to do.

    If it came pre-installed as the full version, then you should have received the product code with your paperwork when you purchased the notebook. Unfortunately there is no way to recovery the product key from the previous version of Windows that you had installed.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Where can I input the puk code in iPhone 5S

    I have forgot my Pin code
    Now I will trie with the PUK code
    Where can I give the code in iPhone 5?
    patha

    You can look at this support document, however it seems you need to contact the carrier. http://support.apple.com/kb/HT1316

  • I am trying to work at home on an urgent project today, however I appear not to be able to open my recently purchased CC ai & photoshop & id. Where can I find my redemption code please?

    Please can someone tell me where to find my redemption code Please can someone tell me where to find my redemption code

    Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

Maybe you are looking for