Where can I find another retaining cpu bracket?

I forgot to remove the top and bottom brackets for the cpu when I sent my motherboard back for replacement.  Where can I get another?  Thanks

Quote
Originally posted by squinty
ack!  It didn't come with the metal plate that goes underneath.  :(
It should, since the one that came with my Zalman was slightly different than the stock MSI metal plate.  I don't think the Zalman would attach properly if you didn't use the metal plate that should have came with it.

Similar Messages

  • Where can i find the recovery key of my mac on another place then my mac cause i cant get in to it ? please help

    where can i find the recovery key of my mac on another place then my mac cause i cant get in to it ? please help

    *Firefox 4 versions and later do not run on a PowerPC Mac.
    *Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/5.0/system-requirements/
    For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
    * http://www.floodgap.com/software/tenfourfox/
    Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html

  • Where can I find XP x64 drivers for Portege R500 - hotkey / power management?

    Where can I find downloads that will enable power management or hotkey support for my Portege R500?
    I have already installed drivers for everything except fingerprint reader (don't want), tpm (really don't want), and hdd motion sensor (tos620a) (not bothered about right now). Most drivers are latest from original vendor websites, or, failing those, from Toshiba's Vista 64-bit download areas.
    Everything else generally works: wifi, graphics & chipset, sound, lan, bluetooth stack, cardbus, card reader, etc.
    However, having done this, the following issues remain:
    FN hotkeys don't work for suspend to ram, suspend to disk, *screen* *brightness* - essential to extending lifetime; FN hotkeys for numeric/direction pad, external monitor toggle *do* work
    Dedicated backlight toggle button doesn't do anything
    However, in order to get battery lifetime beyond ~2.5 hours and closer to the rated 7.1 hours, I'll need to turn some things down / off occasionally. What software can help and where can I get it, such that it works on Windows XP x64 edition?
    Note:
    I have tried the xp 32-bit packages that Toshiba supplies, they don't appear to work on x64. The 'ctrls' package requires 'cmod', but 'cmod' gives this error:
    TOSHIBA Common Modules Setup
    Not an ACPI machine. Cannot install TOSHIBA ACPI Logical Device.
    OK
    I have tried the xp 32-bit package called 'pwrsav'; it installs a bad help link to my start menu, and adds a couple of exes, tpsmain and tpsoddctl, to my auto-runs. These 32-bit executables quit immediately after execution.
    I would have tried to install Toshiba's Vista 64-bit packages for hotkeys / common modules / power management, but the only one of the three I can find via toshiba.co.uk are common modules, and unfortunately that zip file only contains .inf, .cat and .sys files, no installer.
    Motivation:
    I'm using a fresh install both because the default Vista install is unusable (900MB memory used on a fresh boot desktop, drive split into multiple partitions, trial, adware and broken software installed left and right)
    I'm using x64 because I'm a software engineer whose next product needs to work on x64, and this new laptop was a likely first candidate

    You didn't link to the tool you found. If you meant this tool then, you should be aware it doesn't work on x64 on R500:
    Display Tuner
    Cannot detect monitor!
    Your monitor does not support DDC control or your videocard is not supported by Display Tuner.
    You cannot use Display Tuner in this configuration.
    OK
    It would be unlikely to work in any case, as display driver brightness isn't normally the same as the screen's brightness (hence power usage).
    Maybe it's a communication issue, but I *have* found +original+ drivers for all essential components, just not for things like screen brightness - something that, to be honest, I more expect to be handled in firmware / bios, as that's been my experience on previous laptops, and is more reliable in any case, considering I could be running an oddball Linux or a completely different OS, or a CPU-intensive high-priority task.
    The R500 series seem to be scrimping on the firmware and expecting OS utilities and dedicate yet another system tray icon to take over that job.
    It does look like x64 is a no-go for mobile use on this machine, due to lack of firmware power management, which is a great pity as the point of such a light machine is mobility. I'll wipe it and install XP 32-bit and see how that goes.

  • HT1657 I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?

    I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?

    I found my answer in another Thread and it worked... so for anyone who needs it, here it is:
    https://discussions.apple.com/message/19134562#19134562
    Had the same problem and spoke with Apple Support. They had me reset the System Management Controller:
    Shut down the computer. With the computer off, on the left hand side of the keyboard press shift+control+option along with the power button simultaneously and release. Wait 5-10 seconds and restart the computer.
    This solved my problem and I was immediately able to purchase, download, and play an HD movie from iTunes w/o any error message.

  • I want to run apple Hardware Test but can't find it on any CD's.  I bought my iMac in 2009.  I think it had 10.4 installed.  It's not on my installation disk.  Where can I find it?

    I want to run Apple Hardware Text but can't find it on any CD's.  I bought my iMac in 2009.  It came with 10.4.  Apple Hardware Test is not on the installation disk.  Should I have it?  Where can I find it?  I"m now running 10.7.4.

    The disc plainly state:
    To  use the AHT, hold down the D key as the computer starts up.
    Works here. However, there was an issue with installing Lion that screwed this process up.
    Mount disc 2, run this command in the Terminal app, OPTION-click & hold Finder's Dock icon, and select RELAUNCH:
    defaults write com.apple.finder AppleShowAllFiles 1
    That unhides all hidden files/folders.
    Now, drill down to /"Applications Install\ Disc"/System/Library/CoreServices/ and drag the .diagnostics folder into your Lion boot volume's /System/Library/CoreServices/ folder. That might require you to authenticate to copy the folder into the CoreServices subfolder.
    Run this command to hide the normally hidden files/folders and RELAUNCH the Finder again.
    defaults write com.apple.finder AppleShowAllFiles 0
    This should allow the machine to boot into AHT when restarting and holding down the D key.
    If that doesn't do the trick, run this command in the Terminal app:
    sudo chown -R root:wheel /System/Library/CoreServices/.diagnostics
    At the Password: prompt, carefully type in your admin password, since nothing shows up on the screen, and hit the return key. Then, try another restart, holding down the D key.

  • Where can I find OS 10.4.11 to install to my old PowerBook G4?

    Hello.
    I have an old Powerbook G4 on which I had installed OS 10.4.11,
    but I can't seem to find the cd to reinstall. It is running a bit slow as it has been many years, and I wanted to format the hard drive and reinstall the same OS.
    I also have Mac OS leopard, but i think it might be too heavy for this old machine.
    1. What is the latest OS I can put on this powerbook so that it still runs smoothly?
    2. If i want to install 10.4.11 where can I find it?
    Dimitra

    Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store *but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*. For other sources, do a Google search for [b]MA453Z/A (10.4.6)[/b], [b]MA190Z/A (10.4.3)[/b] and [b]M9639Z/A (10.4) [/b]. Also look on eBay. Be sure & buy a retail version (black with silver X) <img src="http://www.macmaps.com/tiger.jpg"> and not a model specific version (gray) (See <b><a href=" http://discussions.apple.com/thread.jspa?threadID=1976068" target="new"> Can I use another Mac's system restore disc on my Mac?</a></b> ). Expect to pay (possibly a lot) more than the Apple list price of $129.
    Also check these web stores: http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521  http://www.allmac.com/shop/index.php?cPath=5_10003
    After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
    Look at this link [b]Mac OS X v10.4 Tiger Installing Software Support Page[/b]
    http://www.apple.com/support/tiger/install/
    You can also download the [b]Tiger Installation and Setup Guide[/b]
    http://manuals.info.apple.com/en/Tiger_Install_Setup_Guide.pdf
    When you upgrade the OS, do it via Archive & Install. See [b]About the Archive and Install feature[/b] http://support.apple.com/kb/HT1710
    Be sure to select Preserve Users & Settings. Also, repair permissions before and after the install.
     Cheers, Tom

  • Where can i find a Power Adapter for the IdeaPad A2109?

    How are you?
    Looking for another Power adapter for the A2109....
    Havnt found the original in eBay...
    Is anyone knows where can i find the Power adapter?
    If not the original - is there any generic alternative that in good  quality?
    Any details? please feel free to provide!
    Thanks a lot!!!
    Solved!
    Go to Solution.

    b.t.w: charging is only by the USB port, am i right?
    One of these could suite?
    http://www.ebay.com/itm/New-Ariic-5V-2A-2000mA-AC-DC-USB-OUTPUT-Wall-Charger-for-Tablet-PC-Cell-Phon...
    http://www.ebay.com/itm/5V-DC-2000mA-USB-Wall-Home-Charger-Adapter-Supply-MP3-MP4-EU-Plug-High-Quali...
    http://www.ebay.com/itm/5V-1-5A-7-5W-EU-Wall-Mount-USB-Power-Adapter-Travel-Charger-Mobile-GPS-MP4-u...
    http://www.aliexpress.com/item/Ainol-years-novo7-Ares-charger-5v-1-5a-usb-original-adapter/693452820...
    http://www.aliexpress.com/item/For-UZONE-F6-advanced-WISE-Tablet-PC-5V-2A-USB-Plug-Power-Supply-Adap...
    Is it right that a lower ampere in the adapter = better battery life? 
    Thanks for all of your help!

  • Where can I find a startup disk for Powermac 7600?

    When I tried to boot my powermac 7600 i received the '?' icon in the center of the screen.  So I thought I would try to boot from the startup disk.  Uh-Oh, I seem to have lost my startup disk to my powermac 7600.  Where can I find a start up disk?  Or is their another way around the issue?

    A Disk Tools PPC file can be found via Apple's Older Software Downloads list (http://www.info.apple.com/support/oldersoftwarelist.html).
    http://download.info.apple.com/Apple_Support_Area/Apple_Software_Updates/English -North_American/Macintosh/System/Mac_OS_8.1_Update/Disk_Tools_PPC.img.bin
    A floppy from the above file should work as a startup disk for your computer (it is intended for Mac OS 8.1 and Mac OS Extended, but it should at least allow you to boot the 7600). However, the problem is that you would have to locate someone with another old (pre-1998) Macintosh computer with Disk Copy 6.3.3 (the Make a Floppy command under the Utilities menu) in order to create the floppy.
    http://download.info.apple.com/Apple_Support_Area/Apple_Software_Updates/English -North_American/Macintosh/Utilities/Disk_Copy/Disk_Copy_6.3.3.smi.bin
    Jan

  • Where can I find a download site for Acrobat X Standard, and Acrobat 9 Professional.

    I purchased Acrobat X and Acrobat 9 Professional, and no longer have media to re-install.  Where can I find a site that will allow me to download?  I have serials/license codes as they are both registered with Adobe. 
    h

    I have same problem as above, managed to get through the jungle of Adobe stuff took me long to find a link to download of Acrobat 9 Pro which I purchased long ago (for another strange reason the re-download link is not available from my order history page in my account). When I click on the Acrobat 9 Pro download link (on the page above) this is what I get:
    Access Denied
    You don't have permission to access "http://trials2.adobe.com/Applications/Acrobat/APRO/9/trials/AcroPro90_efg.exe?" on this server. 
    Reference #18.27174b17.1371522008.cc20b12
    Any ideas what to do?
    Thanks!!
    BTW It is absolutely impossible to get hold of a customer service in Adobe, I recall once chatting with someone asking how to reinstall my product (which I paid money for!) and was told off by a "customer service officer" that I cant reinstall it if I dont "deactivate" on another machine, which crashed long ago and was disposed of, he was very patronising and the whole experience was very unpleasant. This is just to share experience.

  • Where can I find a logic board for iMac G5 17" (EMC No. 1989) Apple Part

    HI  Where can I find a logic board for iMac G5 17" (EMC No. 1989) Apple Part #: 661-3290, 661-3351?

    Thanks--makes life easier!
    I found DV Warehouse has a number of G5 logic boards but none had the exact model number:
    http://www.dvwarehouse.com/iMac-G5-Logic-Board-c-4771.html&pltid=05fedd9f246e2a1 dbc9f35cd6712e781
    They have a toll-free number. You could ask if another board # would be compatible.
    Another option is to contact recylers or schools shucking off older gear. Using the enigma of " A used computer is worth more parted out," you might be able to pick up another G5 cheaper than its LB. Unless the LB had the dreaded "leaky capacitor" failure, most computers don't get discarded for a bad LB.

  • How to install all the drivers for the MacBook with Windows 7 or 8 without the disk from OSX Lion? Where can I find the drivers?

    Guys, a have one big problem..My customer brought me a macbook with windows 7 installed to do a format and reinstallation, but she is no longer the OSX Lion, and do not know how to install the sound drivers, "touchpad", among other drivers, how to solve this? Where can I find the drivers? The MacBook is now with Windows 8 installed.

    Sorry my bad english..
    See is meant. The MacBook has already come for me with Windows 7 installed, checked that it does not have another partition with OSX Lion installed, do not know how the person who did the maintenance before I managed to remove the partition with the Lion, so I can not create a disk or access boot camp because there is no partition Lion and don't own the DVDs of OSX Lion, you understand me?
    There is a boot camp Windows executable? Where do I find, since I poked around and found nothing on ...
    The sound driver is installed, but not working ... and the rest are missing there also, the trackpad also does not work correctly, the right button does not work ... My experience with mac is low, it may be that you do not know how it works correctly the trackpad

  • New MacBookPro. Where can I find a driver for my Microtek Scanmaker 3600

    I recently bought a new MacBook Pro (10.6.8) but to date, haven't been able to find any software/driver to use for my scanner, including the Microtek site. I have a Microtek Scanmaker 3600 that still works perfectly. I have searched forums and online sites for software to use the scanner on the new laptop and hate to think I need to buy a new scanner when the 3600 works fine. I have an HP Deskjet 930C and was able to find the software/driver to use on the new laptop. Does anyone know where I can find the software/driver to get my scanner to work?
    Where can I find a driver for my Microtek Scanmaker 3600. Tried VueScan and TwainSane without success. Do not want to buy a new scanner when old one runs great. Please Help?
    Thanks!

    Thank you for the response.
    I downloaded it and it keeps telling me "No Scanner Detected." I looked on their website under supported scanners, found my Microtek ScanMaker 3600 and it says "NO" for Mac.
    http://www.hamrick.com/vuescan/microtek_scanmaker_3600.html
    I just sent an email to them asking if VueScan does support a my scanner. I hope it does. I have been searching but am not proficient or know enough of what to look for. I just don't want to have to buy another scanner.

  • Where can I find the Java SE 6 runtime download so I can get Adobe Photoshop CS5 up and running again.

    Where can I find the Java SE 6 runtime download so I can get Adobe Photoshop CS5 up and running again. I have to go this route. Currently on my Mac, I need to be running Java 7.65 for work-related stuff. I went to the Java site, but could not find anything that simply says "Java SE 6 runtime" ... Or, is there another way to get CS5 up and running with my recent Yosemite download?

    No, I can't go that route. I have to stick with my current Java 7.65 ... Our IT department said just to download SE6 Runtime separately ... If I was understanding that correctly. Or, can you have two different versions of Java running ... 6 ... and 7.65?

  • AI.llb - Where can I find it??

    Does anyone know what an AI.llb library is used for, and where can I find it? I am trying to use some examples from the NI website which require this particular library, and I don't have it installed as part of my LabVIEW 8 PDS.

    Hello,
    I should take a programm made about 2 years ago by another person and I am looking for the same library, ai.llb used in the programm, but I cannot find it.
    My labview version is 8.5 and I have NI-DAQmx 8.7.1. I don't have in the vi.lib the folder Daq. Is it due to the fact I am not using the traditional DAQ? Where can I found the library?
    thanks for your answer!
    Sophie

  • I imported vacation photos, got the color wheel and did a force quit. Now I can't find any of those photos, and of course I deleted them from the SD card when I imported them. Where can I find those photos?

    I imported vacation photos from my cameras SD card and deleted them when the import was complete. Then I moved them from Events into an Album. When trying to move 2 photos as once to another album I got the color wheel and locked up. I did a force quit but when I go back into iPhoto none of the recently imported photos appear - not in Events, the album, trash, etc. Where can I find those photos?

    backup the iPhoto Library and launch iPhoto while depressing and holding the option and command keys until the first aid window appears - rebid your iPhoto library
    LN

Maybe you are looking for