Where can I find BR*Tools Studio

It might be called BR*Tools or BR*Studio.
it is a tool that was released in 2008 (I believe) to manage Oracle databases.  BR stands for Backup and Recovery tools.  There is a standard set of tools that SAP releases for Oracle called BR*Tools.  BR*Studio is the GUI front end for these tools.
I've looked through service marketplace and SCN, and only get directed to the store.
Any suggestions?

Hi Gabriel,
Refer SAP note 1224432 - BR*Tools Studio: Frequently Asked Questions (FAQ)
Most of your queries are answered here.
Where can I download my copy of BR*Tools Studio?
The latest version of BR*Tools Studio is available as a free download from the SAP Developer Network (SDN) at
           www.sdn.sap.com/irj/sdn/ora
Hope this helps.
Regards,
Deepak Kori

Similar Messages

  • Where can I find Snapshot tool?

    Where can I find Snapshot tool on  keyboard?

    I recommend you simply do a web search for "screenshot"...
    Mylenium

  • Where can I find Patch Tool in CS6

    i just purchased CS6...but could not find Patch tool which is supposed under same tab as Spot Healing Brush Tool...what should I do...please help~~~

    no matter how many times I clicked the same spot there is only one Spot healing Brush Tool there...all other tools  including Patch tool are missing
    Please see below screen shot.
    please advise if Adobe needs to check your current CS6 package to see if it's missing.
    Please let me know what should I do. thanks.

  • Where can I find a tool to assemble PDFs from seperate files programatically?

    Good morning all,
    I have an interesting question for you all.
    We use a large number of PDF forms in our business. As our business has increased over the years, these forms have become very involved and fairly complicated to the point where we have dozens of potential variations.
    Up until now, we have just created four or five basic configurations and then our HD has been removing uneeded portions for final use. This has gott3en to the point where it is too complicated to go on this way so we are looking for a better solution.
    Our forms break out into four basic sections:
    Legal section (different for each form)
    Basic agreement (three variations)
    Schedules (several varations)
    End customer agreement (one version for all)
    Here is the question...Is there a third party app out there that aloow us to create a web page or Sharepoint site where our users could select one from Column A, one from column B, three from column C and one from column D and assemble them into a single PDF?
    I realize that we can technically do that with Acrobat but we don't want to buy licenses for the who team and we would like some kind of enterprise type tool.
    One other consideration, in order for our customers to be able to fill out these forms and save their changes locally, we do add form fields to the docs and save them with Adobe extended features. If we save the various pieces with the extended features active, can we then assemple the pieces into a whole and still retain that feature?
    The goal will be to generate a PDF with the extended features actuve that our user can then save and email to our customer, ready to use
    Last item, is it possible in the above scenario to create our piece-part PDFs with a place holder that could be used to insert a logo into as part of the above described process?
    I know, three questions in one post...I will take any answers to any portion that I can get.
    Any help at all will be greatly appreciated.
    Best regards to all,
    Steve

    The enabling part will have to be done with LiveCycle Reader Extensions, which is also available from Datalogics as the PDF Java Toolkit with Reader Extensions.
    If you can get all of your users to move to Reader 11 and don't use digital signatures, consider:
    1. Appligent's AppendPDF Pro, perhaps along with FDFMerge.
    2. Debenu's Quick PDF Library
    3. iText

  • Where can I find Final Cut Studio retail?

    As a graduate of Media hoping to get into the industry as an editor, I find myself in the difficult position of trying to find a retail copy of Final Cut Studio. Every retailer I've searched no longer stocks the software. I'm worried that I may not be able to get hold of a copy and will be forced to download Final Cut Pro X, despite the fact it has recieved terrible reviews and would rather get the older, better software.
    Has Apple phased Studio out of retail because if they have, that's not something I wanted to hear.

    In the technology world, especially in the world of video with an ever increasing number of codecs being introduced each year, it would be a reasonable assumption that software that's already two years old (FCP 7) and will never be developed or updated in any way, will only be good for about two to four years.  And that's assuming that you have access to the hardware that supports the older software.  It's my personal prediction that Apple will drop the MacPro line of desktops within the next couple of years.  With their move to iOS and consumer gadgets and software, coupled with the fact that it is generally the video and audio professionals that use beefy desktop system, and the fact that Apple is clearly shifted its focus away from the professional crowd, what will you do when you need new or replacement hardware to run this old, EOL software on and Apple has nothing to offer?
    Since you're just starting out, my advice to you would be to start learning actual professional editing software and I'd further strongly suggest that you do that on a different platform than a Mac.  If you can find FCS 3 and have a decent system to run it on, great; you can use that as well.  But I'd plan for an Apple-free future if you want to make a living in video post-production.
    I don't make these statements lightly; after all these years using Apple products, I find it's just a sad fact.
    -DH

  • Where can I find the 'Tools' menu on my iMac? OS is 10.9.5, Safari is 7.1.3.

    Hi All,
    Does anyone know how I can access the 'Tools' menu that I think should be on the top tool bar? I have searched on the net for help without any success.
    Thanks,
    David.

    You must be thinking about another browser. FireFox has a Tools menu--Safari does not. Most of the things FireFox puts under its Tools menu are found in Safari preferences.
    Editing or customizing the toolbar is accessible through Safari's View menu. If you need advanced features found unde "Web Developer" in the FireFox Tools menu, you can activate Safari's "Develop" menu by doing Safari > Preferencs and selecting the "Advanced "tab. At the bottom is a checkbox to show the Develop menu.
    Here is a comparison. FireFox's "Tools" menu with the web developer options expanded:
    Safari's "Develop" menu after activation:

  • Where can I find the tool that convert LV 3 to LV 6?

    Thanks
    Bojan

    There is such a "magic tool"!!! You can have it from NI. Call them and ask for the conversion kit! It shoul be for free.
    Ciao
    Regards,
    Luca

  • Where can I find the "tools" menu

    I don't know how to locate tools

    Click on the Firefox icon, or right click on a Toolbar. You can have the Menu Bar stay on by:
    View > Toolbars and CHECK the Menu Bar.
    http://support.mozilla.com/en-US/kb/Menu%20bar%20is%20missing

  • Where can I find the equivalent tools in Photoshop that are in the develop module of Lightroom

    Friends:
    Where can I find the equivalent tools in Photoshop that are in the develop module of Lightroom?  For example I would like to use the shadow, clarity, lens correction and such tools but cannot find them in Photoshop.
    Thanks amigos
    Migs

    The obvious or not so obvious first. Depending on your knowledge. When you open a tiff, jpg, or camera' raw format they can be opened in Adobe Camera raw first which has identicle controls to lightroom's develop module.
    Starting with I beleive CS5 maybe 4, some of the tools made their way into photoshop it self. Take a look at the camera lens filter, the Image>Adjustment menu or the adjustment layers which now support vibrance for example.

  • Where can I find the Ellipse Tool in PE 12 in order to draw a circle ?

    Where can I find the Ellipse Tool in PE 12 in order to draw a circle ?

    ReaderTortune
    Besides the article to which GautamBahl referred....
    You may also want to review the following for working with the Titler's Shapes in Premiere Elements 12.
    http://www.atr935.blogspot.com/2013/08/pe11-titler-shapes-for-highlighting.html
    Thanks.
    ATR

  • Where can I find FPGA replication tool (Set RIO Device Settings.vi) for LabVIEW 2013?

    I just upgraded to LV2013SP1 and came across a VI that now is broken in my project: Set RIO Device Settings.vi (which is a part of RIOSystemReplication2009.zip). Apparently this happened in 2009 as well for a different VI in the same collection of tools (see Where-can-I-find-FPGA-replication-tool-for-labview-2009. I tried the mentioned VIs in this article but both of them are broken). Note that the Replication and Deployment (RAD) Utility does not seem to support the functionality that Set RIO Device Settings does, so I still need to use the old one. 
    Since the VI is password protected I cannot attempt to fix it. Might be something as simple as a type that changed...
    Any help appreciated! 
    Rob
    LV2011,LV2012,LV2013

    Hey Rob,
    This problem has already been brought to NI R&D's attention, and they are working on a fix under Corrective Action Request (CAR) 454468. Unfortunately, until they fix the problem there may not be a way to correct the problem in the near future. The CAR is set for higher priority, so a fix could come shortly.
    Regards,
    Ryan

  • I wanna get a UML Case Tools, where can i find one for free or opensource?

    Hi, Merry X.Mas!!!
    I wanna get a UML Case Tools, where can i find one for free or opensource?
    Merry X.Mas!!!

    Hi,
    There is one more tool by name Enterprise Architect which supports UML2.0. A 30days eval copy is available. You can try hands on it.

  • Where can I find the Eclipse CEP tool for Eclipse 3.6?

    Hi,
    I looked at the site and could find only the tool for Eclipse 3.5. Where can I find the Eclipse CEP tool for Eclipse 3.6? (http://download.oracle.com/technology/software/cep-ide/11/)
    Thanks,
    Shimon
    Edited by: 884793 on Dec 5, 2011 4:10 PM

    Correct. That's why I said "hopefully released soon"
    andy

  • Where can I find the paint bucket tool

    where can I find the paint bucket tool

    Which version of photoshop and operating system are you using?
    Generally the Paint Bucket Tool is grouped in the same tool slot as the Gradient Tool in the tool box.
    You can click and hold on the tool icons in the tool box to see the hidden tools.
    (hidden tools are preset if there is a small black or white triangle to the lower right of the tool icon in the tool box)

  • Where can I find Background Eraser Tool CS6?

    Hello,
    Im new to the photoshop program. Im having trouble locating the background erase tool. When the drop menu opens on the erase button, the only options are eraser tool, scissor tool, knife. Where can I find the background eraser tool?
    Thanks

    Hi Travo, it sounds like you are not in Photoshop, but Illustrator!
    This is what you would get when you open up the eraser tool in Photoshop CS6:
    However, I imagine you are seeing this instead:
    Illustrator doesn't have the Background Eraser Tool because it is not a photo-editing program, it edits vector artwork. Can you try to see if you have photoshop installed? This is what the icon of the program looks like:

Maybe you are looking for

  • Open Word Doc from form in web setting not client/server

    Hello, I am new to form. I need to open a word doc (on client PC )from Oracle Form by a button click. I did some research online and looks like Client_Ole2 is the package I need. But when I looked into my Build-in Package (in forms builder), I only s

  • Icon dragging issue

    I've recently been trying to neaten up all of my files in finder, as I tend to just let everything pile up and be completely unorganized. I typically have two windows upon so I can drag and drop into the appropriate folder. I've recently been having

  • I donot want header in some pages

    Hi, I am Printing PO report through XML Publisher.In this PO report I have header which contains PO number,Supplier Name legal entity ,Page number Then there is PO body which contains PO Line information. After that I have to print the Terms and cond

  • Duplicate Handling Unit Number

    Hi All, I am stuck with this error where I can see same handling unit no. in two different deliveries. I am not able to figure out why is the handling unit repeating. I checked it in the VEPO table where I see same handling unit no but in different y

  • Error in creating Transaction iViews

    I am trying to create two transaction iViews, that connect to R/3 and CRM, but I keep on getting the following error messags: An exception occurred while processing a request for : iView : N/A Component Name : N/A Unable to lookup System 'R93CLNT100'