Where can I find Event Log ID's, produced by Intel ICH9R RAID controller on Windows Server 2003?

I need to monitor RAID errors and events by parsing Event Log, but I need a list of possible errors that I can find in event log. I'm using Intel ICH9R RAID controller. Server manufacturer (SuperMicro) said, that errors, produced by controller, are interpreted
by Winows and than are put to Event Log, so I need to find this info somewhere else.

Hi,
As far as I know, there isn’t such as list present those Event Log ID’s for Intel ICH9R RAID controller, you may contact Intel to perform
the further research, you may also wait for other customer's experience sharing on this.
By the way, based on my experience, most of the IT guys will use the monitor application/toolkit comes with the RAID controller, so you may contact Intel
also to get more information. Thanks for your understanding.
Best Regards,
Vincent Hu

Similar Messages

  • Where can I find the LOG file for bash/command history typed into Terminal?

    Where can I find the LOG file for bash/command history typed into Terminal?
    For 2 weeks ago I was searching for a log file on my server. Somehow I opend a file where I could see a list of all bash-commands I had ever entered into OSX Terminal.
    Now I need this file.. but cant find it.
    What is the official location for this LOG file?
    Thank you so much for helping.

    cat .bash_history

  • Where can I find a log of action center/security?

    I have a message in Action Center under security that says it has found a malware on my computer. 
    Where can I find a log of which file and location it was? 
    It only states the malware-name. No location or filename.
    Also note that this is not my antivirus (system center endpoint protection) who located the malware. And it was not the mrt.exe either. I checked that log and it is clean.

    I don't have Win 7 right now, but in Win 8 you can check archived messages option on lect side when you browse to : 
    Control Panel\All Control Panel Items\Action Center
    Can you check this ?
    I don't think we have separate logging for action center. 
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Where can I find redo log buffer advice

    Hi,
    Our customer needs the information about redo log buffer. But In administrator--database configuration--memory parameters item of grid control 10g, I can only get the information about buffer cache & shared pool, as well as the corresponding advice. I cannot find information about redo log buffer in this page. I wonder why the information about redo log buffer is not included in this page.Where can I find it?

    The Log Buffer is part of your Intialization Parameters.
    So, from EM, you can find the information you need when you select the Database > Adminstration > All Initialization Parameters (under Database Configuration)

  • Where can I  find DSM log

    I am running EP7 SP7 and I turned on the DSM logger.  Where can I find the DSM log ? EP is on a UNIX server.
    Message was edited by:
            Denise Carew

    Hi
    You can see the DSM logger on the EP server itself.
    1. Logon as an administrator
    2. Click on System Admministration tab
    3. Under Detail Nav choose Support->Support Desk
    4. Under support desk, choose SAP application
    5. You should see DSM Logger and DSM Monitor
    Hope this will help you
    Thanks & regards
    Arun Singh

  • WD app Deployment Error - Where can we find J2ee log file for linux install

    Hi,
       I have a problem with deploying a web dynpro application. There are no errors before deployment but when I deploy the application, I get a deployment error with the following description.
    I tried to view the trace or log file but we have SAP installed on a linux OS and I do not know where can we see the log or trace file. Please help.
    Version:
    SAP NW 2004s SP15
    NWDS 7.0
    xRPM 4.5
    Error Description:
    May 14, 2008 12:49:50 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager)
    [Thread[Deploy Thread,5,main]] ERROR:
    [008]Deployment aborted
    Settings
    SDM host : BS307
    SDM port : 50718
    URL to deploy : file:/C:/DOCUME1/SMULLA1/LOCALS~1/Temp/2/temp20045SempraDemo4.5.ear
    Result
    => deployment aborted : file:/C:/DOCUME1/SMULLA1/LOCALS~1/Temp/2/temp20045SempraDemo4.5.ear
    Aborted: development component 'SempraDemo4.5'/'local'/'LOKAL'/'0.2008.05.14.00.49.36'/'0':Caught exception during application deployment from SAP J2EE Engine's deploy service:java.rmi.RemoteException: Cannot deploy application local/SempraDemo4.5.. Reason: Clusterwide exception: Failed to deploy application local/SempraDemo4.5. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:      com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application local/SempraDemo4.5. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine? (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Deployment exception : The deployment of at least one item aborted
    Edited by: Subramanya Srinivas Mullapudi on May 14, 2008 8:34 AM

    Hi Reza,
    Hope you are doing good.
    You can set the trace level in the SAP/Java Gui dynamically :
    Call transaction SMICM
    Choose the menu Goto → Trace Level → Set
    In the pop-up window, set the desired level (0,1,2,3)
    To switch on an /nSMICM or ICM HTTP trace via command line you should go to
    usr\sap\<SID>\<instance_number>\exe directory and run the icmon program with the following command:
    icmon◦◦pf=\usr\sap\<SID>\SYS\profile\<SID>_<instance_name>_<HOST>
    where you fill in the SID, instance name and host corresponding to your system.
    The icmon program is interactive and to increase trace level you must write
    "+" and pres enter.To quit you must write  "q" and press enter.
    The trace will be written◦to the following file: usr\sap\<SID>\<instance_number>\work\dev_icm
    Thank you!
      Kind Regards,
      Hemanth
      SAP AGS

  • Event 29 and 24 that cannot receive the time source in windows server 2003

    I have one server windows server 2003 R2 pop up the event log as below
    Event 29
    The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently
    accessible.  No attempt to contact a source will be made for 15 minutes. NtpClient has no source of accurate time.
    Event 24
    Time Provider NtpClient: No valid response has been received from domain controller server01.xxxxx.com after 8 attempts to contact it. This domain controller will be discarded as a time source and
    NtpClient will attempt to discover a  new domain controller from which to synchronize.
    My domain controller server01 do not have any pop up event log for the time service.
    I have found some information in Mircosoft TechNet would suggest such as restart  the time service with command prompt. I have tried for it. But the event id keep on to pop up for each hour.
    Should I configure for the time service can read for the hardware?
    Moreover, if I still read the time from DC, any configuration can be done for my server and domain controller? Thanks! 

    Hi,
    Thanks for your question.
    Would you please tell us that if the DC holds a role of PDC emulator? If yes, you can run “DCdiag” on the DC to check if it is advertising itself as a Time server. In addition,
    please make sure that no firewall is blocking UDP port 123 and you can also ping the DC on the client computer to verify that the client computer is capable of contacting the desired source.
    In addition, please make sure that the value of the
    AnnounceFlags in the registry below is 10:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config
    Please also make sure the value of
    Type
    in the registry below is set to NT5DS:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters
    More information:
    Windows Time Service Tools and Settings
    http://technet.microsoft.com/en-us/library/cc773263(v=ws.10).aspx#w2k3tr_times_tools_suxb
    Best regards,
    Susie

  • Where can I find a log of my sent faxes in 10.9

    I need to verify that a fax was sent. Where is the log located?

    Hello
    first step get info about your mac and report please
    go to apple menu -> about this mac , should show some thing like that
    about your problem with you Internet provider , could be a problem with your acces box , ask for a replacment
    for "logs" look at applications folder -> utility folder -> console app
    search messages look like that "AirPort: Link Down" or "AirPort: Link Up" to find event on wifi activitie
    22/02/12 18:15:09
    kernel
    AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    22/02/12 18:15:10
    configd[13]
    network configuration changed.
    22/02/12 18:15:33
    kernel
    MacAuthEvent en1   Auth result for: c2:3f:0e:c6:1d:cd  MAC AUTH succeeded
    22/02/12 18:15:33
    kernel
    AirPort: Link Up on en1
    22/02/12 18:15:33
    kernel
    AirPort: RSN handshake complete on en1
    22/02/12 18:15:33
    configd[13]
    network configuration changed.
    22/02/12 18:15:34
    ntpd[19]
    bind() fd 28, family 30, port 123, scope 6, addr fe80::e6ce:8fff:fe17:98d6, in6_is_addr_multicast=0 flags=0x11 fails: Can't assign requested address
    22/02/12 18:15:34
    ntpd[19]
    unable to create socket on en1
    HTH
    Pierre

  • Where can I find the LOG of all sql

    Is the a file where I can find a log all the sql that have be running on the database?
    I want to fond an sql query that is causing an error but all I have is an error message and I would like find a file with all the sql that have been run against a database instance.
    Thanks

    There is not one. You can see what has been executing recently in v$sql, or v$sqlarea, or v$sqltext, or v$sqltext_with_newlines. v$sql has sql_text and sql_fulltext. sql_text is the first 1000 bytes of sql_fulltext.
    Now you know why we instrument out code - so it tells us what bad thing happened, where it happened, when it happened, and the conditions under which it happened.

  • Where can I find update log of AIR 3.1, FP 11.2 ?

    I can`t find them.
    would you give me link ??

    Hi,
    You can get to know the list of new APIs for the latest release by clicking the What's New link on top of this page:
    http://help.adobe.com/en_US/FlashPlatform/beta/reference/actionscript/3/
    For your comvenience, I've picked up URLs for latest Flash Player and AIR releases.
    http://help.adobe.com/en_US/FlashPlatform/beta/reference/actionscript/3/whatsnew.html#plyr air
    http://help.adobe.com/en_US/FlashPlatform/beta/reference/actionscript/3/whatsnew.html#plyr flash
    With every new release, APIs of erstwhile releases get appended to the master list of APIs within the reference docs.
    Please let me know if you have any other questions.
    Thanks,
    Suhas Yogin

  • Where can I find a log of all the system changes to workspace

    I'm looking to find a log that tracks when new metadata files are loaded into Workspace, or a new rules file and if it tracks what was changed in the new metadata load.
    Thanks you for your help.

    Mark,
    There is no way to view a history of the cards that you have redeemed.
    When you redeem a card, check immediately that your credit balance has been incremented by the appropriate amount.

  • Where can i find the files after backing-up in itunes? i'm using windows 7. thanks!

    i cant locate my back-up files after running a back-up in itunes. please help.

    Okay...I have some more information and perhaps we are getting closer.  On the 250GB, first I went into that disk and used Disk Utilty to re-format it once using Mac OS Extended (Journaled) then a second time, zeroing it out. I did a screen shot to review if needed, and both times it looked perfect...249GB available.  Then I went into the Time Machine preferences to get ready to backup again, and it had not excluded the other external 120GB with iTunes so I excluded it. I may has previously, never noticed in that screen that it takes a bit of time for it to calculate the information to save.  I may have just clicked on it quickly without reviewing it first.  Today I did, and gave it time to calculate.  At one point the actual 250GB itself, showed up and I excluded it too like the 120GB.  After it finished, the calculations are still it wrong - claiming it has a 200GB backup when the iMac either contains 150GB (based on when I do Get Info) on it or from OmniDisk which calculated about 100GB.  I have not allowed Time Machine to do a backup yet, until this discrepancy can be clear.
    One thing that I thought I had seen or reviewed previous on the Time Machine settings was my home folder - I could be wrong but wanted to mention that.  Another little tidbit to ponder an well is that I have a files of icons that I use for the Hard Disks, and a few folders where I Get Info on the Icon and on the destination and just cut and paste.  I did that today to the 250GB after zeroing, but while I was in the Time Machine settings the change was deleted and neither the manufactures icon was there nor mine, and it has the default blue-green one the software uses.  I know, because my sister's is that way on her system-unchanged.
    Feedback?

  • Where can I find direct downloads of Flash Player - beta 11.5.500.97 for Windows or Macintosh?

    This beta version works fine in my old Pentium 4 - 2,80Ghz, i woul like to re-install this version.
    The version 11.5.500.104 seems too heavy to my old pc, youtobe videos play sloowly after this update.
    Thanks, for your answer... sorry about my poor english..
    Ricardo
    PS:- My computer:-
    Mother Board:- GA-8TSR350MT
    Processor:- Pentium 4 - 2,80Ghz - Single Core - FSB 533
    Ram:- 2Gb
    Graphics:- Geforce FX6200 - 512Mb
    Windows XP SP2
    Browser:- Firefox 17b3

    Thanks for your answer...
    Well, when the video begins, he locks even in quality 480p, in 720p the video stops  and when is exhibited the video appears without synchronization with the audio.  It´s sounds like the videois too heavy to the computer. The process of the computer stay in 100% continuously. 
    My computer:-
    PS:- My computer:-
    Mother Board:- GA-8TSR350MT
    Processor:- Pentium 4 - 2,80Ghz - Single Core - FSB 533
    Ram:- 2Gb - DDR1 - 400Mhz
    Graphics:- RADEON X1650 - 512Mb - AGP
    Windows XP SP2
    Browser:- Firefox 17b7
    Internet conection :-20Mb
    Site:- http://www.youtube.com/watch?v=JSAyRWMPXZY&feature=related
    and all others youtube videos
    With version 11.5.500.97 the video plays normally, the lacs were minimal, barely imperceptible. 
    This in any of the browsers that I use, Firefox and Internet Explorer

  • Portal runtime error: where can I find the system log?

    I got a portal runtime error. Like this:
    Portal Runtime Error
    An exception occurred while processing your request
    Exception id: 10:22_16/05/08_0007_13424550
    Where can I find the log file / more details?
    Thanks
    René

    Hello rene,
    2 ways for accessing log: 
    1) browse portal filesystem : \usr\sap\J2E\JC00\j2ee\cluster\<server instance>\log\
    2) use sap log applications
    I suggest you to use logviewer or visual admin(it contains logviewer) applications. It will display formated logfile and you will be able to filter on severity / User Name / date / .......
    if you are using visual admin, just connect with Visual Admin then browse to  <server name> / services / log viewer then  again <server name> \usr\sap\J2E\JC00
    j2ee\cluster\server0\log and then click on defaultTrace.trc
    it is pretty the same navigation when using logviewer
    Kind Regards
    Cedric Meyer

  • Can't access some clien'ts features after migration Windows Server 2003 - 2008R2

    Hi,
    I have done migration of the domain controller from Windows Server 2003 to 2008R2. The old domain controller is set as a relay. After that, I have problems with the clients.
    Now with the 2008R2, it is impossible to:
    -Explore targeted computer's disks.
    -All RPC features.
    -The deployment by GPO is also impossible (Group Policy object did not apply because it failed with error code '0x80070015 The device is not ready).
    All of these features works well on the relay. I also can't shutdown a computer from a pc logged as Administrator.
    I've got the problem on the 3 sites I've migrate.
    Thanks.

    > The old domain controller is set as a relay.
    Please explain "relay" further. I never heard this label in terms of
    Domain Controllers...
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

Maybe you are looking for