Where can I find good docs on emctl?

I'm getting all manner of errors when I try to start our EM agent (run emctl start dbconsole). But when I search the docs on "emctl" to try and figure out what it doesn't like I get a disappointing selection of hits.
Where should I be looking in order to wise up on this stuff and work out what we're doing wrong?

Yes, it looks like 11g doc doesn't have emctl. You can use 10g document because emctl seems still using old code from 10g. See the output from 11g emctl.
EMCA and emctl are used for different purpose. emca is to configure EM and emctl used to start/stop and checking status etc.
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Oracle Enterprise Manager 10g Database Control commands:
emctl start | stop dbconsole
emctl status | secure | setpasswd dbconsole
emctl status agent
emctl status agent -secure [-omsurl <http://<oms-hostname>:<oms-unsecure-port>/em/*>]
emctl getversion
emctl reload | upload | clearstate | getversion agent
emctl reload agent dynamicproperties [<Target_name>:<Target_Type>]....
emctl config agent <options>
emctl config agent updateTZ
emctl config agent getTZ
emctl resetTZ agent
emctl config agent credentials [<Target_name>[:<Target_Type>]]
Blackout Usage :
emctl start blackout <Blackoutname> [-nodeLevel] [<Target_name>[:<Target_Type>]].... [-d <Duration>]
emctl stop blackout <Blackoutname>
emctl status blackout [<Target_name>[:<Target_Type>]]....

Similar Messages

Where can I find good organ and keyboard sounds for Logic Express?

Where can I find good organ and keyboard sounds for Logic Express? The included sounds seem to be lacking or hard to access.

Update: Not terribly impressed with the interface for NI's Vintage Organs from the demo download, although the sound demos sure sound good. The letters are tiny and hard to read and the whole thing feels very PC-centric. I guess a guy gets spoiled by the intuitive stuff. I think what I'll try for now is just hooking up my keyboard (Korg N1, circa 1998, about 1700 built in sounds) as a sound module and record the waveforms when I find a sound I like. I did find the EXS24 and several other software synths with some cool organ sounds after digging a little deeper. It would be good if Apple came out with another jam pack just for organs and keys, as the existing jam packs are so easy to use.

I updated SCCM 2012 R2 from CU3 to CU4. Where can I find good directions on what else I need to do to make this work?

I updated SCCM 2012 R2 from CU3 to CU4. Where can I find good directions on what else I need to do to make this work? I'm assuming I have to deploy the new clients?
Thanks,
James
James A+, Network+, MCP

You have to create different collections (x64 vs x86 clients) because the .msp to be deployed is architecture specific.
"Distribute content" just distributes binaries to distribution points. You can select a collection there, but that has nothing to do with clients. It just distributes content to DPs that are assigned to collections.
Torsten Meringer | http://www.mssccmfaq.de
Ok. That is helpful. I appreciate the response. I hate to ask another question, but I', still learning the product. In the Step-by-Step SCCM 2012 R2 CU4 Installation Guide from System Center Dudes, it says to create the collections by using their predefined
queries. I tried to enter these as queries but I think I am doing so in the wrong area of the collection creation process. Could you break it down for me?
Do you know of any good training (free) that is video based an breaks SCCM 2012 R2 down into smaller more detailed steps?
Thanks,
James
James A+, Network+, MCP

Set Up Security: Where can I find good documentation

Setting up spesific security for user groups is causing be a great deal of trouble. I want to grant "add and modify" rights for users and full rigts for administrators. However, whatever way I do it, the result is wrong. Where can I find some good documentaion with examples? I'm using IFS 9.0.2.

I've also having some troubles with this. Though I believe I now have a decent understanding of the security model of IFS I can't get it to work.
I have some users which need all access to a folder + its subfolders. And no matter what I can't get it to work.
As always with Oracle there are no examples - only tons of manuals.
If anyone can tell me how to do this => [email protected] - so far I've spent DAYS reading & trying out different combinations!
YES - I could (and DID) read the Administration & Setup Guide. But it didn't help one bit (we're now three persons who have looked at this and still no progress).
So Oracle... MORE examples please. Or rewrite the manuals so you don't need to be an expert in ACLs before understanding how to use them to do -simple- tasks.

Where can I find ANT docs ?

Hi All,
Wls 6.1 uses ANT extensively. Can any body pls tell me where can I find docs on Ant
and build syntaxes for weblogic apllications ?
Or is it the same that is available from Apache ?
TIA,
Sudarson

Hi.
same docs as from apache.
Regards,
Michael
sudarson wrote:
Hi All,
Wls 6.1 uses ANT extensively. Can any body pls tell me where can I find docs on Ant
and build syntaxes for weblogic apllications ?
Or is it the same that is available from Apache ?
TIA,
Sudarson--
Michael Young
Developer Relations Engineer
BEA Support

Where can I find CODE & DOCS for Acrobat PDF Library SDK?

Hi,
I had used Acrobat PDF SDK in the past but it didnt serve the purpose and we had to abort plan. THis time we are using PDF LIBRARY SDK instead. When can i find the code and documentation for it?
The only page I see is http://www.adobe.com/devnet/pdf/library/
So I want to study the object models, objects, functions etc, cant find it. Also is there a book you can suggest to study it. I sort of know the PDF-SDK wel, is the PDF-LIBRARY-SDK almost the same ?
Pls direct me to the code and documentation, so I can start coding on it.

>WHy dont you have non confusing names for the products, one is the free Acrobat PDF SDK
No, it's the Acrobat SDK. This doesn't seem confusing at all: it's an
SDK for automating/controlling Acrobat, just as the Windows SDK is a
tool for working with Windows, the Photoshop SDK is a tool for working
with Photoshop etc. "Free" isn't used in the title, because that would
be confusing, and might suggest it can be deployed with the free Adobe
Reader.
Nevertheless, maybe something could improve it because there are a
huge number of developer who assume it will work with the Reader or
without Acrobat, despite its name.
>and the other is Acrobat PDF LIBRARY SDK, right?
The other is the Adobe PDF Library. It's a library from Adobe for
working with PDF. Acrobat is not part of the name. It would be
confusing if it were. Maybe it could be called the "non-Acrobat PDF
Library".
Aandi Inston

Where can I find good jsx examples? (more than Adobe's)

1. Any good list of places to find Adobe Illustrator JSX examples?
2. Any reason why Adobe can't provide examples that use all of the basic commands. For example, in Adobe's Javascript examples (/Applications/Adobe Illustrator CC/Scripting.localized/Sample Scripts.localized), there's no usage of PlacedItem.
3. Any examples of using PlacedItem with a move to a given coordinate? I simply want to click the upper left corner of the transform positions, then put 0 in x and 0 in y, in the toolbar.
4. I'm guessing I'll use PlacedItem.transform but there's also PlacedItem.move

Just take a look at this tool: ExtendScript toolkit.
You could find it here:
http://www.adobe.com/devnet/scripting.html
This will help you.
Thomas.

Where can i find the doc about xml config file of 9ias?

i cant find the "Oracle9iAS Containers for J2EE User’s Guide",
it should contains the info about the xml config file, i dont
know why oracle launch a product without the config guide, i
have read ton of material for learning the configuration of 9ias
but still have not find the answer!
i cant find it in otn:
http://otn.oracle.com/tech/java/oc4j/content.html#technicaldocs,
it have jsp, servlet....etc guide but no config guide, if
someone seen it in microsoft or sun or borland website, please
call me :)

i mean the deployment config file in the application server like: server.xml, application.xml, web.xml, it is the J2EE standard, and can be used between all application server, tomcat, 9ias, weblogic........

WebLogic 11gR1: Where can I find the docs and the examples

I just installed the Zip Distribution of WebLogic 11gR1 on Ubuntu 10.10. I also installed the supplemental zip, that contained samples.
On the WebLogic 9 installation on a windows box at work, starting up WebLogic causes it to bring up a browser with a web page with very nice documentation on it, including hyperlinks to the examples. How do I find this page with my at home ZIp Distribution?

The README that accompanies the WLS supplemental zip file describes how to create the samples:
http://download.oracle.com/auth/otn/nt/middleware/11g/wls/README_SUPP.txt?e=1311046330&h=9c8a6b93b066372a53ca5d65bafcb9a5
>
WLS Supplemental Zip Distribution for Oracle WebLogic Server @WLS_VERSION@
The WLS supplemental zip distribution is intended for development use. It is
supported on Windows, Linux and Mac OS X systems. It contains the necessary
artifacts to develop and test applications on WebLogic Server.
WLS supplemental zip requires that the primary zip distribution is already set
up and is ready to use. Supplemental zip contains samples, evaluation database
(Derby) and L10N console help files.
The following instructions should help in quickly setting up the extra
components in WLS via the supplemental zip. Please refer to the general WLS
documentation for detailed instructions.
QUICKSTART
1. Ensure that WLS has been installed under MW_HOME (eg: /home/myhome/mywls)
using the zip distribution - wls@WLS_VERSION@_dev.zip
2. Extract the contents of the supplemental zip MW_HOME
3. Setup JAVA_HOME and MW_HOME variables in the current shell.
This should pre-exist.
Linux
$ export JAVA_HOME=/home/myhome/myjavahome
$ export MW_HOME=/home/myhome/mywls
Mac
$ export JAVA_HOME=
/System/Library/Frameworks/JavaVM.framework/Versions/1.6/Home
$ export MW_HOME=/home/myhome/mywls
Windows
> set JAVA_HOME=C:\home\myhome\myjavahome
> set MW_HOME=C:\home\myhome\mywls
This version of WLS requires JDK 1.6. Ensure that you have the proper
JDK version installed.
4. Run the installation configuration script in the MW_HOME directory
(This step is required to be run only once. If you move the installation to
another location/machine, you need to rerun this step)
Linux/Mac
*$ ./run_samples.sh*
Windows
> run_samples.cmd
This step creates the sample domains. The sample
domains should be created in MW_HOME/wlserver/samples.
5. WLS can be started from these sample domains by issuing startWebLogic command.
This will also bring up the WLS console in the default browser.
6. Start a browser and open up url - 'http://localhost:7001/console' to
administer the server.
WHAT IS INCLUDED
# Samples
# Derby DB (for use with Samples)
# L10N versions of WLS console help files
CLEANUP
The supplemental zip contents are interleaved with the base zip contents. You
have to delete the MW_HOME directory which will delete both the WLS
installation as well as the supplemental zip contents.

Where can I find good info on vcm?

Can somebody recommand some good websites/blogs/persons to follow regarding vcmn(other the the official VMware ones)

i actually would like to know as well.. i am just using the help file..

Where can I find reference docs for descriptor xml files?

Hi,
I am trying to do some analysis on an existing application. I have all the descriptor xml files and want to get detailed information on the options available on each tag. For example, there is a <maintain-cache> tag within the <query> tag and I would like to find the details of the options available. Is there a DTD or XML schema definition available where these options are discussed in detail? I'd prefer to see this discussion from the XML descriptor file (lowest level) perspective.
Thanks

Although TopLink's meta data is generally used in XML it is typically modified using the mapping editors (standalone Mapping Workbench or JDeveloper integration). These provide access to all of the configurable options. In addition some customer extend or write their descriptors in code using the documented API.
The best way to interpret the XML is to use the XSD in conjunction with the API. You will find the organization of the XSD matches the programmatic API in the JavaDocs.
Doug

Where can I find good instructions about camera and how to take pictures?

I don't know why I am having so much trouble taking pictures. I can get it on the right camera...front or back....imcan take a picture of what imsee, delete it, send tomfacebook, etc. What I CANNOT do is focus on an object to photograph. I tap on what I want and get a little blue square. Thatmismwheremi am stuck. Imhavemthaaped, pinched, etc but I,m not getting it. I have an iPad book but it gives no details about the part I am stuck on. I know it is something obvious but I am not seeing it.

I think the iPad goes to,sleep which is why it turns black...I will change the settings so it stays awake longer!
I am using iOS5 which explains no slider. I guess I don't know,hot to pinch because when I think I am doing it nothing happens. Mint pinch what you do on any sceen to make the font bigger....zoom? I have no trouble with that anyplace else, but it is not happening here,m I tap and get the blue box on the object I am focusing on. Pinching before or after changes nothing that I can tell.
I am on the back camera....or at least I think so. Thanks for all your help....there is something I am not doing and itmismdriving me crazy. I think it's the pinching that is the problem, but I don't know what to do to,change it.
Also is there any way a person can stay logged into this discussion for more than 30 seconds? When I go back to try something you suggest, i am logged out almost instantly.

Where can I find good ID pocket folder templates?

My ID software came with a huge folder of templates for all kinds of projects, but strangely enough, there are no pocket folder templates. I wonder why?
Aside from printer's websites, are there any ID pocket folder templates in some obvious places that I've missed that anyone can suggest?
Thanks in advance for any suggestions!
mtngigi

I just want to second Peter's suggestion.
To get a "folder template" made up the company has to make or have made a "die-forme" which can add extra cost.
If you contact your print supplier and tell them your needs - they should already have a folder template setup that suits a "die-forme" they already have.
That way you don't incur the cost of having the "die-forme" created.

Where can I find good Java Skins

So none of the Java Looks and Feels are really that appealling to me, and potential users. So where would you guys recommend going to get Java Skins. Yes I have used google but I'm asking here in case I overlooked something on google.

Perhaps you could say what your searching has turned up so far? This would serve a couple of functions: it would go some way to answering the question for anyone else who has it, and it would allow others to be able to answer your question about sites you might have missed.

Where can I find good general information about data migration?

I need to move about 120GB of data from my Oracle8i Enterprise Edition Release 8.1.7.4.0 - 64bit server to a new Microsoft SQL server 2005 64 bit.
What is the best way to get this data across ?
Thank you.

>
I need to move about 120GB of data from my Oracle8i Enterprise Edition
Release 8.1.7.4.0 - 64bit server to a new Microsoft SQL server 2005 64 bit.
What is the best way to get this data across ?By being very careful? 8-)
Seriously though, as well as the link from the other poster about
datatypes not being compatible, you should also worry about
SQL not being the same - look at
http://social.msdn.microsoft.com/Forums/en-US/transactsql/thread/804dc08e-927a-4152-af06-a90c0ee63230/
You should also worry about CONSTRAINTS, PL/SQL, Sequences,
the list is endless.
An Oracle (and SQL Server) database is not just a collection of bits,
but a system - if it wasn't, we'd all store our data in Notepad for free!
Brooks (mythical man-month) says "be prepared to throw one away"!
Another question you should ask yourself is
"What is my own area of expertise?"
Are you a Perl/Python/Java/Delphi/C/C++/<insert_language_of_choice> programmer?
Look at doing the work in stages using staging tables.
Best of luck.
Paul...
Thank you.--
When asking database related questions, please give other posters
some clues, like OS (with version), version of Oracle being used and DDL.
Other trivia such as CPU + Disk configuration might also be useful.
The exact text and/or number of error messages is useful (!= "it didn't work!"). Thanks.
Furthermore, as a courtesy to those who spend time analysing and attempting to help,
please do not top post and do try to trim your replies!

Where can I find good docs on emctl?

Similar Messages

Maybe you are looking for