Where can I find NIVIUSBK.sys

Hello,
I try to generate a driver for my device with NI VISA. But the
generated driver wasn´t accepted by windows.
In the generated *.inf file a file called NIVIUSBK.sys is mentioned.
But it seems that this file is not even installed at my computer. I can
´t find the file. Normally it should be in the System32 folder, but
there is nothing.
I think that the missing NIVIUSBK.sys is the reason why my driver don
´t work.
So where can I find the NIVIUSBK.sys. Can somebody send my the file?
Thanks!

Hai,
Go through this link.
http://www.ophiropt.com/laser/download/softwares/utilities.htm
http://www.ophiropt.co.il/laser/download/softwares/labview_vis.htm
hope this helps
Mathan

Similar Messages

  • Where can I find XP x64 drivers for Portege R500 - hotkey / power management?

    Where can I find downloads that will enable power management or hotkey support for my Portege R500?
    I have already installed drivers for everything except fingerprint reader (don't want), tpm (really don't want), and hdd motion sensor (tos620a) (not bothered about right now). Most drivers are latest from original vendor websites, or, failing those, from Toshiba's Vista 64-bit download areas.
    Everything else generally works: wifi, graphics & chipset, sound, lan, bluetooth stack, cardbus, card reader, etc.
    However, having done this, the following issues remain:
    FN hotkeys don't work for suspend to ram, suspend to disk, *screen* *brightness* - essential to extending lifetime; FN hotkeys for numeric/direction pad, external monitor toggle *do* work
    Dedicated backlight toggle button doesn't do anything
    However, in order to get battery lifetime beyond ~2.5 hours and closer to the rated 7.1 hours, I'll need to turn some things down / off occasionally. What software can help and where can I get it, such that it works on Windows XP x64 edition?
    Note:
    I have tried the xp 32-bit packages that Toshiba supplies, they don't appear to work on x64. The 'ctrls' package requires 'cmod', but 'cmod' gives this error:
    TOSHIBA Common Modules Setup
    Not an ACPI machine. Cannot install TOSHIBA ACPI Logical Device.
    OK
    I have tried the xp 32-bit package called 'pwrsav'; it installs a bad help link to my start menu, and adds a couple of exes, tpsmain and tpsoddctl, to my auto-runs. These 32-bit executables quit immediately after execution.
    I would have tried to install Toshiba's Vista 64-bit packages for hotkeys / common modules / power management, but the only one of the three I can find via toshiba.co.uk are common modules, and unfortunately that zip file only contains .inf, .cat and .sys files, no installer.
    Motivation:
    I'm using a fresh install both because the default Vista install is unusable (900MB memory used on a fresh boot desktop, drive split into multiple partitions, trial, adware and broken software installed left and right)
    I'm using x64 because I'm a software engineer whose next product needs to work on x64, and this new laptop was a likely first candidate

    You didn't link to the tool you found. If you meant this tool then, you should be aware it doesn't work on x64 on R500:
    Display Tuner
    Cannot detect monitor!
    Your monitor does not support DDC control or your videocard is not supported by Display Tuner.
    You cannot use Display Tuner in this configuration.
    OK
    It would be unlikely to work in any case, as display driver brightness isn't normally the same as the screen's brightness (hence power usage).
    Maybe it's a communication issue, but I *have* found +original+ drivers for all essential components, just not for things like screen brightness - something that, to be honest, I more expect to be handled in firmware / bios, as that's been my experience on previous laptops, and is more reliable in any case, considering I could be running an oddball Linux or a completely different OS, or a CPU-intensive high-priority task.
    The R500 series seem to be scrimping on the firmware and expecting OS utilities and dedicate yet another system tray icon to take over that job.
    It does look like x64 is a no-go for mobile use on this machine, due to lack of firmware power management, which is a great pity as the point of such a light machine is mobility. I'll wipe it and install XP 32-bit and see how that goes.

  • Where can I find the value of "_kks_use_mutex_pin"??

    Hi, all.
    Where can I find the value of "_kks_use_mutex_pin"??
    What dictionary for "_**" parameter??
    Thanks and Regards.

    Hi,
    To find the value for a hidden parameter you must look in a hidden place:
    SQL> select
      2    x.ksppinm name,
      3    y.ksppstvl value
      4  from
      5    sys.x$ksppi x,
      6    sys.x$ksppcv y
      7  where
      8    x.inst_id=sys_context('userenv', 'instance') and
      9    y.inst_id=sys_context('userenv', 'instance') and
    10    x.indx=y.indx AND
    11    x.ksppinm = '_kks_use_mutex_pin';
    NAME                                                                             VALUE
    kksuse_mutex_pin                                                               FALSE
    SQL> show user
    USER is "SYS"
    SQL>Only SYS can see these special views. However, this does beg the question why do you want to see the value of this parameter? Attempting to change this value without official Oracle support is Not A Good Idea and can leave your database unsupported.
    HTH
    Chris
    Message was edited by:
    Chris Poole (because I can't spel)

  • Where can I find the program "dbmssslib.dll"?

    Dear guy,
    I have read some notes about how to access external database in SAP ECC6.0. But it don't say where the dbmssslib.dll is.
    So. Could you kindly tell me where can I find it.
    Pls show me the directory on OSS. thanks.
    looking forward to your feedback.
    BR.
    Kevin.zeng

    HI,
    http://www.jt77.com/human/resources-14913.html
    http://www.sap.info/public/INT/int/prnt/PrintEdition-2523142314a605a4a3-int/-1/articleContainer-393442441ce922b17
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/error-with-lsmw-problen-in-step-distribution-authorization-profiles-1849334
    usr\sap\DEV\SYS\exe\run\dbmssslib.dll'
    Regards
    Nicole

  • My system for work only supports Firefox 7.0 and 8.0. I can only find 3.6 and 9.0 available on your website. Where can I find 8.0. I really love Firefox, but I can't use an unsupported version, as features of our Blackboard will not work.

    Where can I find a download for Firefox 8.0. Work does not support the 9.0 platform, yet.

    Firefox 8 English version for windows vista is here
    * http://releases.mozilla.org/pub/mozilla.org/firefox/releases/8.0.1/win32/en-US/Firefox%20Setup%208.0.1.exe

  • Fire Fox sent not all the data in text form. Reached only piece of information. Where can I find the cache of sent text?

    Fire Fox sent not all the data in text form. Reached only piece of information. Where can I find the cache sent the text?
    For example, I posted an article on a news site, but found that only a small part of my article was posted.

    I'm not sure whether Firefox saved that information. There is a chance that it is in the session history file, especially if you haven't closed that tab yet. To check that:
    Open your currently active Firefox settings folder (AKA your Firefox profile folder) using
    Help > Troubleshooting Information > "Show Folder" button
    Find all files starting with the name sessionstore and copy them to a safe working location (e.g., your documents folder). In order to read a .js file, it is useful to rename it to a .txt file. Or you could drag it to Wordpad or your favorite word processing software.
    The script will look somewhat like gibberish, but if you search for a word in your article that doesn't normally appear in web pages, you may be able to find your data.
    Any luck?
    For the future, you might want to consider this add-on, although I don't know how long it saves data after you submit a form: [https://addons.mozilla.org/en-US/firefox/addon/lazarus-form-recovery/].

  • HT201272 Where can I find the app password saver by yonglin wang.  i wanted to restore my iphone and i had purchased this app and it is not anywhere in my purchases to reload.  Why is it not on my list of purchases?

    Where can I find the app "password Saver" by yonglin wang?  while updating my iphone the app was dropped for some reason.  I went to reload from my purchased apps and it is not available.  The history shows my purchase but I can not find the app to reload.  I've lost some critical info and need to retreive if possible.  Any suggestions?

    You tried what ? If the app is no longer available in the store (can you find it in the main part of the store ?) for re-downloading then you would need to have a copy of it somewhere e.g. on your computer's iTunes, on a backup of your downloads.

  • Ask again:  Where can I find source code for CPRM algorithm?

    Hi, everyone.
    Where can I find reference implementation or some sample codes for CPRM(content protection for recordable media) algorithm? Can anyone help?
    Information about CPRM can be find here,
    http://www.4centity.com/
    JAVA version is preferred and C/C++ implementation is also OK.
    Thanks in advance,
    Geo

    Thanks, edsonw buddy!
    I only found C2 cipher source code and some other documents dealing with CPRM algorithm. And what I want is total CPRM implementation reference source code (C2 is only a basic module of CPRM algorithm).
    So can you provide me some useful information dealing with how to get total CPRM implementation reference source code? Both JAVA and C/C++ will be OK.
    Have a wonderful weekend,
    George

  • Where can I find source code for CPRM algorithm?

    Hi, everyone.
    Where can I find reference implementation or some sample codes for CPRM(content protection for recordable media) algorithm? Can anyone help?
    Information about CPRM can be find here,
    http://www.4centity.com/
    Thanks in advance,
    Geo

    Thanks, edsonw buddy!
    I really take rather a lot of time to search reference implementation in this site but failed to find it out. Can you give me the precise link from which I can download reference implementation and sample vectors?
    Best regards,
    George

  • HT204370 I rented a movie from the Itunes store and started watching it, but my computer jammed part way through, and now i can't find the movie to continue playing it, where can i find it?

    I rented a movie from the Itunes store and started watching it, but my computer jammed part way through, and now i can't find the movie to continue playing it, where can i find it?

    Hi brett242424,
    Welcome to the Support Communities!
    The movie would be in your iTunes library, in the Movies application.  However, if the rental period has expired, you may need to contact the iTunes Store Support about your situation:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933?viewlocale=en_US
    Cheers,
    - Judy

  • Where can i find steps to back up iPhone to time machine?

    where can i find steps to back up iPhone to time machine?

    can't back up iPhone to time capsule?  only MACs?
    You can also back up to iCloud.
    See this support document for more details on backups:
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support

  • On installation of Firefox 4 beta, it tells me that it won't run on my Mac. When I go to system requirements, it takes me to a page for Firefox3.6 requirements. Where can I find the requirements for the beta?

    The link to system requirements for Firefox 4 beta takes you to a page that gives you the requirements for Firefox 3.6 instead. I assume that the requirements for the beta are different as I can't seem to install the beta on my Macs. Where can I find the beta system requirements?

    I never expected Mozilla to neglect the users of Apple's PowerPC (PPC) computers, while still supporting much older operating environments such as Windows XP. So, I should just throw away a $6,000 system, which is still fast and functional, and contribute masses of heavy metals to land-fills because…?
    I'm hurt and confused after supporting Firefox for many years — installing and using it not only on my own computers but on most of my customers' computers. Now I have to tell my customers with PPC Macs they can't have a secure cross-platform browsing experience from Mozilla. They'll have to learn to use some other browser, or buy a new computer.
    If one doesn't buy a new computer every year, one doesn't deserve Firefox 4. This is sort of sounding more like a Microsoft™© doctrine. (But wait, I can still have Firefox 4 on a ''SERIOUSLY CRAPPY WINDBLOWS XP pile of rubbish?!'') Please open your eyes Mozilla. This just doesn't make sense.

  • Where can I find the Start up disk and how can I delete file from it.

    where can I find the Start up disk on theMac Book Air?
    How can I delete files from it?

    The startup disk is the internal SSD in your MBA.  You may delete files by draging the file  to Trash (or clicking on them and then execute COMMAND+Delete).  Then empty Trash.
    Ciao.

  • Mini DVI to HDMI with audio. Where can I find it?

    I'm looking for a cable adapter (mini DVI to HDMI with audio) to my mac book air (2010). Where can I find it?

    DVI and miniDVI only transmit video-signals but no audio-signal.
    Regardless of the cable adapter you get (I don't have any recommendation) you always have to make a audio-cable connection between the MBA and the TV.
    Stefan

  • HT1657 I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?

    I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?

    I found my answer in another Thread and it worked... so for anyone who needs it, here it is:
    https://discussions.apple.com/message/19134562#19134562
    Had the same problem and spoke with Apple Support. They had me reset the System Management Controller:
    Shut down the computer. With the computer off, on the left hand side of the keyboard press shift+control+option along with the power button simultaneously and release. Wait 5-10 seconds and restart the computer.
    This solved my problem and I was immediately able to purchase, download, and play an HD movie from iTunes w/o any error message.

Maybe you are looking for

  • Voice memos saving in iTunes to macbook

    iphone 3gs voice memos show in iTunes under devices and play fine - but how do I transfer/copy to the macbook - won't let me drag to mac folder or anything.... Q: how do I copy / move them to mac

  • Digital Copy of Bluray won't show up in iTunes

    I got the bluray trilogy of Jurassic Park for christmas, and each of the movies came with a digital copy i could download on itunes. So i did as the instructions told me to do, went online, entered the code, it opened up itunes for me, and let me dow

  • Help! - as3 IE preloader issues

    Ok, So, I work for the NPS, and they have an outdated CMS. I have no rights  to upload an .html file, or edit one that the CMS makes. SO, I am forced to use their little deal to display my .swf files. Problem: http://www.nps.gov/glca/photosmultimedia

  • Doubt in AP days overdue analysis report

    Hi Is it possible for any of you to explain me that If a particular Doc no say X for vendor y has a clearing date say 3rd Nov and but there is a payment run ID per on 31st Oct (posting date); Has this any effect on the AP days overdue analysis report

  • AdvancedDataGrid + IHierarchicalCollectionView + filterFunction bug: Example and workaround

    Yay, bugs! My first question is, do you get this bug too? I'm running Flex 3.4 in Flash player 9. My second question is, am I doing something wrong, or is this something that should be fixed in Flex? Error: Bookmark no longer valid.     at ListCollec