Where can I find reliable information on apple's history?

I have to do a business analyses on a company of my choice for a class.... I am aware that I may be posting this in the wrong place, but I just need to know where to get reliable information on the company.
Thank you

Hi Caleb,
You're correct in your realization that this 'might be the wrong place.'
This community is for discussion of Apple's now discontinued productivity application, AppleWorks.
That said, if I were looking for information on the history of Apple Inc, I would start by contacting a reference librarian at my school or at the public library, explain what I needed, and get results that had been vetted for reliability and accuracy.
If you're into do it yourself mode, try an internet search of "apple computer history company", without the quotes, and varying the order of the terms. Most of what you'll come up with will be the 'popular' history, rather than the 'business' history, and you'll have to judge the reliability of the information on your own rather than through the lens of a librarian trained to make those judgements. If you trust your own filters, that route may do you well.
Regards,
Barry

Similar Messages

  • Where can I find license information about Apple Distributed music?

    I created a movie and published it on a site similar to YouTube; unfortunately I used music distributed by Apple via iMovie and Soundtrack Pro and I need to show that I am able to use said music. I am unable to find this information in the programs except for in the actual file information, which states it a Copyrighted by Apple Inc. But I probably still need to find the statement or document that says I can use their music for these non-profit purposes.
    I hope that makes sense.
    Thanks!

    Go to http://www.apple.com/legal/sla/ and download the iLife09.pdf
    Look at paragraph 2.C.
    Paragraph 2 says Permitted License Uses and Restrictions
    Paragraph C. discusses the royalty free use of the music included.
    (The pdf is locked so I couldn't extract the actual text.)
    Basically it says you can't distribute the pieces separately - but you can use content that includes them. Please read it yourself!
    I got called away for a phone call before I had a change to submit my reply and ended up duplicating AppleMan1958's comment.
    Message was edited by: F Shippey

  • The last Apple I used was a IIe. Where can I find basic information about what an Ipad will do and how it differs from an Android tablet?

    The last Apple I used was a IIe. Where can I find basic information about what an Ipad will do and how it differs from an Android tablet?
    I am considering purchasing this for my wife who has only had experience with Windows machines.

    Here are a number of possibilities:
    http://ipad.about.com/od/iPad_Guide/a/How-To-Use-The-iPad-Best-Uses.htm
    http://www.macobserver.com/tmo/article/8-important-things-you-can-do-with-an-ipa d
    http://iconlibrary.iconshock.com/tutorials/50-things-you-can-and-cant-do-with-yo ur-new-ipad/
    iPad vs Android:
    http://ipad.about.com/od/ipad_competition/tp/iPad-vs-Android-Which-Tablet-Should -You-Buy.htm
    http://www.cnet.com/topics/tablets/best-tablets/

  • Where can I find the information/download about Photo

    where can I find the information on the new Photo?

    https://www.apple.com/osx/photos/
    There is no download for it - it is built into OS X 10.10.3
    LN

  • I have an ipod I want to sell, but I don't know how to determine the specs, which one it is, how much memory, etc. Where can I find this information?

    I have an ipod I want to sell, but I don't know how to determine the specs, which one it is, how much memory, etc. Where can I find this information?

    See this Apple support document.
    http://support.apple.com/kb/ht1353
    B-rock

  • I have replaced my faulty hard drive on my macbook air 1.1 and need to reinstall the original software where can in find this on the apple web site?

    I have replaced my faulty hard drive on my macbook air 1.1 with a new ssd, I need to reinstall the original software,where can I find this on the apple site?

    There is no download for the software.  The factory software that you are looking for is called ilife.  It is all of the software that would have came preinstalled with your mac on your original hard drive when you first bought it.  You will have to get new software on your computer.  This might actually be a great opurtunity to upgrade to Lions.  Search the Lions software in the mac store and it will come up.  Click add to cart and check out.  The price for it is $20.  I defientely recomend Lions, it has alot of new great features.  Then wate for the install disk to come in the mail.  when it come just pop it in and follow the step by step instructions.  If you dont want to upgrade to lions however you can download the ilife package from apple.com for a small price.  Hope this helps.

  • Where can i find more information about using or nesting formulas

    where can i find more information about using or nesting formulas

    I am not aware there is a resource specific to nesting functions.  this comes from understanding each function (or at least the description in the function help).
    a great resource is the function reference which you can see by typing the "=" sign in any cell:
    the important thing to note is:
    1) what are the inputs to the function and
    2) what does the function return (the output)
    the if() function (listed above) takes three inputs and returns one output.  These forums are a great resource!

  • Where can i find a  30-pin Apple connector?

    Where can i find a  30-pin Apple connector?,
    i want to connect an iwow adapter for my iphone,ipod touch and ipad but i can't find it in the apple store,
    so does anyone know where i can buy one?

    I just "Googled" the question....."Where can I find a 30-pin connector" and it linked me to a number of web sites. Try it.       http://https://www.google.com/search?sourceid=navclient&ie=UTF-8&rlz=1T4GGHP_enU S437US437&q=where+can+i+find+an+apple+30+pin#q=where+can+i+find+an+apple+30+pin& hl=en&rlz=1T4GGHP_enUS437US437&prmd=imvns&source=univ&tbm=shop&tbo=u&sa=X&ei=y3O gTrXLC4Pk0QHNzrSFBQ&ved=0CHcQrQQ&bav=on.2,or.r_gc.r_pw.,cf.osb&fp=cf8d5e62edefb1 0&biw=1292&bih=691

  • I am an active member and I am trying to install Abobe Acrobat XI Pro and it is asking for my serial number. Where can I find that information?

    I am an active member and I am trying to install Abobe Acrobat XI Pro and it is asking for my serial number. Where can I find that information?

    Hey jamesl12995614,
    Could you please let me know if you are using subscription or bought Acrobat as a one-time purchase.
    If its a subscription, then all you need is to sign in at adobe.com using your Adobe credentials and download the software.
    Otherwise, you might refer the KB doc link mentioned below to find your serial number:
    Find your serial number quickly
    Hope it helps.
    Regards,
    Anubha

  • Where can I find detailed information on wiring my Switch Device?

    I am using a PXI-4071 High Voltage FlexDMM with a PXI-2584 High Voltage Mux.  The topology is 12x1 1-wire.  Where can I find better information on how to wire this particular device.  I used an example from LV to develop the code, and I can hear the mux switches activating, but I get no readings back.

    Okay, I wasn't expecting to see it wired that way, however, based on the manual, the ref is connected to ref, so that could be the common ground for all the signals.  The scan list only has com0; as an output.  I would expect to see com1 as the output for ch6->ch11.
    Also, I'm not exactly sure how the scanlist works.  Is there a way you could manually set the switches with MAX to test?  The default power on state is all open, so if you close only ch0, then you should see CH0 on the COM0.  Do you have a voltmeter to check voltage and/or continuity?
    I would check continuity between DMM- and GND on the UUT.  Then, with the ch0 switch closed, I would check continuity between CH0 on the UUT and DMM+.
    I believe the enclosed VI will set the switch to ch0 closed. (after you set the resource to what the resource is on the machine you are using)
    Good Luck.
    Attachments:
    2584 Example.vi ‏21 KB

  • Where can i find a list of apple tv movies

    Where can I find a list of apple tv movies?

    On the Movies app, or in any installation of iTunes on a computer (signed in with an AppleID).

  • I want to know how many book I have sell on iTunes. Where can I find that information?

    I want to know how many book I have sell on iTunes. Where can I find that information?

    Ask your friend? What difference does it make if it does not work?

  • Where can i find clear information about sap function modules?

    where can i find clear information about sap function modules?
    for example,
    if i want to know whats the use of function module  "SAPGUI_PROGRESS_INDICATOR" .
    where i can find all the detail info..
    is there any sap transaction code for knowing about all function modules and there use?
    Regards
    Smitha

    Hi:
    For documentation, you have to find it out in se37 but it is not neccessary every Fm would have.
    Now question is about its used (if you know th e function module)-> go in se37-> put function module -> select where used list -> select used in like - program, class, BSP application etc -> click on ok; it would give the list of its used and just go in that find  how it is being used.
    if you have to find the function module for table - > go in se11 -> select table name -> click on where used list -> select function module  interface and click on ok, it would give the list of  its used.
    Otherwise go in g o o g l e dot  c o  m.
    Regards
    Shashi

  • Where can I find more information on Control and Simulation Software?

    Where can I find out more information on Control and Simulation Software for G (GSIM)?
    I am currently programming a PID controller using a Siemens PLC. I have installed LabVIEW DataLogging and Supervisory Control Module which allows LabVIEW to interface with my PLC.
    Would appreciate if you could offer me some advice on whether it would be possible for the PLC PID controller to control a first order process model created using GSIM? Please email me at [email protected] if you could offer me any advice or assistance.
    Merry Christmas and a Happy New Year.
    Best regards
    Donald

    I see that you posted to the DSC forum, but you did not get GSIM information. Below is the link for the user manual for the Control and Simulation Toolkit. It is the single best source for info on the toolkit.
    http://digital.ni.com/manuals.nsf/webAdvsearch/63E23F9BA1494FE98625665E00635898?OpenDocument

  • HT2703 Where can I find Bonjour program on Apple website so I can install it?

    Where can I find the Bonjour program on Apple so I can install it? I want to run Apple TV and I need homesharing from itunes. As of now, my itunes has no internet connectivity so I am assuming it is because I need Bonjour. I already tried the itunes diagnostic tool which told me I have no internet connectivity. Also, disabling pop up blockers and disabling firewalls don't help. I want to install Bonjour, but I want to download it from the Apple website. Any suggestions?

    Uninstalling and then reinstalling iTunes should also reinstall Bonjour.
    If you'd prefer not to uninstall iTunes, try the following procedure.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the Bonjour.msi (or Bonjour64.msi) to do a standalone Bonjour install.

Maybe you are looking for

  • My laptop screen goes black when i plug in an Hdmi cord

    Initially I had both my tv and computer off. I connected the dvi to the tv and the hdmi to the laptop and turned them both on. I had no issue using my laptop as i tried to sync the computer to the TV. However i must have accidentally hit something in

  • Help! I need to restore my pass code.

    OK, I don't have an iTunes account, but I do have an iCloud account, but I can't erase the data and choose a new pass code, because I can't connect to the Internet.  What the ****????  What can I do here?  This seems WAY more complicated than it need

  • User exit which changes po (item level) delievery date (eket-eindt)

    Hi, Can you please suggest EXIT which triggers while changing delivery date (LIKP-LFDAT)  of outbound delivery through TCODE VL02N should reflect in its corresponding purchase order delivery date ( ME22N at item level field (EKET-EINDT).. I tried in

  • Loosing connection to cFP-2020 when editing subvis

    I'm frequently loosing my network connection during the following scenario: Boot my cFP-2020, successfully connect with LVRT, successfully lode and run labview source code with 20MB available memory and stack is 180K, then when I stop my labview prog

  • Hiding columns in table control

    Hi Experts, I have requirement to hide certain columns in table control. I have tried my best to use SCREEN structure with ACTIVE, INVISIBLE, INPUT, OUTPUT options, but not working properly. The table control has nearly 10 columns with DATE as the fi