Where can i find the sample instruments in logic pro x.the proper plugins

Where can i find the sample instruments in logic pro x.the proper plugins. or third party plugins too where can i find them and how in logic pro x can anyone help me please.

My understanding is that if it was purchased throught the App Store, then there is no requirement for a serial number. At which point does it ask you for the serial?

Similar Messages

Where can i find a chinese version of logic pro 9 user manual

Can anyone tell me is there any user manual in chinese for Logic Pro 9?

First of all, Erik is correct.. Logic Studio has been discontinued.. However, there are a few copies left around I am sure... to purchase if you really wanted to...
But.....
Unless you really want Waveburner and Soundtrack Pro 3..(Neither of which have been updated for at least a couple of years now..) there is little point in buying Logic Studio 2... as it will cost you $499... and you can buy Compressor and Mainstage (the other two parts of Logic Studio) for much less than that on the App Store.... and the additional content (that actually took up most of the DVDs in the boxed set) can be downloaded for free within Logic Pro itself.
I think a newer version is soon to be announce.
Not of Logic Studio there won't be.. I believe boxed sets of Logic are long dead and gone... and won't be seen again... It's all App Store products from now on...
There may well be a newer version of Logic Pro on the way.. but no one knows when.... until Apple announce it.

Where can I find a sample ERD for a University

Hello.
I have to develop a program in C# that manages details about the students, taxes, courses, etc and prints some reports.
It's for my license degree.
The programming part is not that hard but the task that is killing me is designing the database because I have poor experience with data modeling.
I don't have access to my university's database so I need to make one myself..and the teachers won't help..
I tried to make a diagram but I realised that I cannot do it, I got stuck.
An university database can get extremely complex and it's hard to make .. so I wonder if any of you know where can I find a sample ERD for a University. I need one as complete as possible.
Any help is appreciated..

jorjiana wrote:
I don't have access to my university's database so I need to make one myself..and the teachers won't help..
Unfortunately due to the quality of most of the homework questions on these forums I believe you when you say the teachers are no help. You should still discuss it with them and make clear you are not learning what they are supposed to be teaching.
http://www.google.com/search?q=university+database+erd
The top hit looks like a good start.

Where can I find a sample of application with textboxs ,buttons and ..

Hi,
I'm new to Java and I'd like to know where can I find a sample of application with textbox, buttons and accessing a database (Oracle or MS-Access) something like a commercial application to start my knowledge in Java. I'm a developer and I use Visual Basic with Oracle DB. I have knowledge in C language.
Thanks.
Autair

Hi Lionalx,
I've tried to follow your tip but I got a page that contains the following message : "This directory contains some helper apps and scripts for setting
up Microsoft Access, SQL Server, or Sybase databases to use with
the examples in examples/Table. For details see the online
documentation in:
http://java.sun.com/products/jfc/swingdoc-current/db.html". Just it. So I've copied the indicadet address but it's redirect to main page of 'swing'. I was there before.
Despite of this error, I'm finding some interesting tips in the address that you indicated. OK?
Thanks.
If you have something new or tip please write me
Thanks
Autair

Where can I find the serial number for LOGIC PRO from the AppStore

Please help me:
Where can I find the serial number for LOGIC PRO from the AppStore?
I bought and downloaded the application, now it asks me for the serial number but I didn't not receive it or can find it.

My understanding is that if it was purchased throught the App Store, then there is no requirement for a serial number. At which point does it ask you for the serial?

Where can i find .trn file location when i successfully take the back up of the database?

Where can i find .trn file location when i successfully take the back up of the database?
I accidentally deleted some records in my table, then i followed the procedure based up on this blog:
"http://sqlbak.com/blog/recover-deleted-data-in-sql-server/"
here it saying to find the .trn file, So here i am unable to find the .trn file where the location file i can found.
Can some one help to find out of this issue.
Ramesh S

Hi,
Try this select to check backup history:
Select
r1.database_name,
r1.name,
(case r1.[type] when 'D' then 'Full database backup' when 'I' then 'Differential database' when 'L' then 'Transaction Log Backup' else r1.[type] end) as BackupType,
r3.physical_device_name,
r1.backup_start_date,
r1.backup_finish_date,
r1.backup_size,
r1.compressed_backup_size,
r2.is_compressed,
r1.server_name,
r1.first_lsn,
r1.last_lsn
from msdb.dbo.backupset r1
inner join [msdb].[dbo].[backupmediaset] r2
on r1.media_set_id = r2.media_set_id
inner join [msdb].[dbo].[backupmediafamily] r3
on r1.media_set_id = r3.media_set_id

Where can I find a list of data elements available in the Cisco AW?

Good afternoon - I am just wondering where can I find a list of data elements available in the Cisco AW?
I am also wondering if anyone has a real-time solution related to agent stats? What I am looking for here is agent 1's running total of today's metric in a real-time report updated everyone 20 seconds or so.
I appreciate any feed back and hopefully I have posted this in the correct community - if not please direct me to where I should have posted my question.
Thank you,
Michael

doubtful that apps store their serialnumbers in keychain.. Like "kappy" said : you must keep track of such important stuff on your own. Those unlock/activation numbers for software are like the key to your car. In the case of a app like comiclife it might be only terrible if you loose it and must re-purchase the app, but imagine that would happen to owners of the full adobe cs suite, which is several thousand Dollars ..

Where can i find a download for acrobat x pro

where can i find a download for acrobat x pro, i lost a hard drive and i am trying to get everything back ?

http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
You will still need your SN. As long as you registered, you can just add a tab in your browser and go to Adobe.com. In the upper right corner there should be a welcome with your name. Move to the small down arrow and select My Products and Services. That should give you your SN of the products that have been registered. Please make a backup of your download and SN for the future. If you had an upgrade version, you will also need the SN of the qualifying product.

Where can I find a sample of dbca.rsp file?

Dear all,
I've just successfully installed for the first time Oracle 11g in silent mode on Redhat Enterprise 5.3
(I installed in silent mode because there is no X system installled on this Linux server).
The installation was completely successful. I used the response file provided in the response
directory (ee.rsp) and I defined the parameters value properly according to what I needed..
Now I want to install a general purpose database. According to what I read in Oracle 11g installation guide,
it is also possible to use DBCA in silent mode again by using a response file.
Now the problem is that I searched for all response files in the oracle package that I downloaded, there
is only three response files (for different type of installations Enterprise, Standard, etc.) but no dbca.rsp.
Well, when I run
$ su oracle
passwd
$ dbca -hI can see the possible options, but in a response file the information is more detailed (specially for
someone like me who is going to use this command for the first time).
Where can I find this file? if it is not provided with Oracle package, in the case where you have a sample
could you kindly copy/paste a version of the file (after removing of course all confidential set of information)?
Thanks in advance,
Dariyoosh
:)

Satishbabu Gunukula wrote:
Hi,
Normally response files located under “Disk1/response“. But for 11g these files are missing from OTN zip files. All the files are there in the correct location on Media download.
They are trying to fix this.
Try to download latest version and check if it available. If available copy the file and run the DBCA.
Otherwise use vncserver for GUI, it comes with RHEL.
Run below command and choose password.
$vncserver –geometry 1290x980
It will provide a hostname for desktop version to open from VCN viewer.
Download VNC viewer from web and run the VNC viewer from your desktop and provide the hostname provided by "vncserver" command.
Hope this helps
Regards,
Satishbabu Gunukula
http://oracleracexpert.blogspot.com
[Click here to learn Voting Disk backup and recovery|http://oracleracexpert.blogspot.com/2009/08/voting-disk-backup-and-recovery.html]
Hello there,
Thank you very much for your attention to my problem. I will try this tomorrow.
Kind Regards,
Dariyoosh
:)

How/where can i find "user" entity from first cup tutorial in the database

within the first cup java ee tutorial a user entity is crated:
@Entity
public class FirstcupUser implements Serializable { ...in some other code the user is created and inserted?:
@PersistenceContext
private EntityManager em;
FirstcupUser user = new FirstcupUser(date);
em.persist(user);the question is how or where in the database(i don't know the database name, the table name should be user?) i can find the inserted users? within net beans in "services" i can see a db server with a "sample" database - this seems to be a preinstalled example db. but where can i find the db created by the web app i wrote?
thx in advance

Press Option key and select Go > Library in the menu bar. To show that folder, open Terminal and copy:
chflags nohidden ~/Library

Where can I find a list of my bookmarks off of the web browser

I would like to make a copy of my bookmarks from firefox before I change computers. where can I find a list of my bookmarks I can copy to a flash drive?

to create a backup:
Open firefox and press ctrl+shift+b
you will get a window.
on the top right corner you can find menu "import and backup"
select "backup" from dropdown menu and choose the location.
to restore the bookmarks:
Open firefox and press ctrl+shift+b
you will get a window.
on the top right corner you can find menu "import and backup"
select restore->choose file->select the file and press 'ok'.

Where can I find a cheat sheet for Premiere Pro on Windows 7?

Where can I find a printable visual cheat sheet for Premiere Pro CS6? Like this one but for PC rather than Mac. I mean showing the shortcuts for each key not just a list.
Thanks

here is a list of keyboard shortcuts for mac: http://support.apple.com/kb/HT1343. For FCP ones, you may want to post in that forum: https://discussions.apple.com/community/professional_applications/final_cut_pro_ x

Where can I find more synth "instruments" for GB??

I'm writing songs in GB for my band to play, and the keyboard player is using a 80s synthesizer. I'm looking to buy or (free download??) instruments that would better approximate actual synthesizer sounds. I'm very unhappy with the selection in GB. Looking more for New Wave/ Disco type sounds. Also, is there anywhere I can buy one instrument at a time? I'd also like a harpsichord, but I'm not interested in any of the other instruments in Jam Pack 4. Thanks!

Etcetera Ellipsis wrote:
I'm looking [for] instruments that would better approximate actual synthesizer sounds.
perhaps you can find something here:
http://www.bulletsandbones.com/GB/PlugInsSynths.html
Etcetera Ellipsis wrote:
Also, is there anywhere I can [get] one instrument at a time?
links to several thousand here:
http://www.bulletsandbones.com/GB/PlugInsSoundFonts.html
and how to use them:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutsoundfonts
(Let the page FULLY load. The link to your answer is at the top of your screen)

Where can I find an example of teh overload functions for the "Createvariable"

I am trying to find a coding example of the overloads for the "CreateVariable" function in Measurement Studio. The goal is to define a variable type at creation time.
Thanks

Hi JohnnieM,
You can see the three overloads for the CreateVariable method in the help here: http://zone.ni.com/reference/en-XX/help/372636F-01/mstudiowebhelp/html/3c1ef3de/. I couldn't find an example snippet of code but if you wanted to explicity define the type you need to use CreateVariable(VariableCreationOptions) like this:
string processName = "myProcess";
string variableName = "myVariable";
ServerProcessInfo procInfo = ServerProcess.Create(processName, true);
VariableCreationOptions varOptions = new VariableCreationOptions(processName, variableName);
varOptions.VariableType = typeof(Double); //this is where you specify the type
ServerVariableInfo varInfo = procInfo.CreateVariable(varOptions);
Hope this helps!
Kevin

Where can I find a sample of PulseMeas()

CVI9.01
The function panel for this function is terrible.
It looks like another function needs to be called before PulseMeas() but I could find nothing in the samples directory.
It is not obvious as to some of the arguments for this function.
i.e. "Pulse Number"
       Specifies which pulse of polarity, high or low, to measure.
"Reference Units"
       Specifies whether the highRefLevel, midRefLevel, and lowRefLevel are interpreted as a percentage
       of the full range of the waveform or as absolute levels.
"Histogram" what to put in here?
Help says if you use "peak method" it ignores Histogram but if you put in "0" because you are using peak it says invalid Histogram
thanks.
- Make Software User Friendly -

Hello all,
I'm reviving this old thread in search for some more detailed informations on this function. Even looking at the most recent CVI release help (CVI2012) I could not find an answer to these questions:
What do I need to put in xxRefLevel parameters when I consider them as percentage (i.e. referenceUnits = 1)? (0.1, 0.5, 0.9) or (10, 50, 90)?
How van the function evaluate period and other values in seconds when there is no evidence of the frequency rate of the samples? Documentation refers to the input signal as waveform, but it is really a simple double array. Nothing to do with waveforms in LabVIEW whose cluster contains the deltaT. And if it is not in seconds, how do I relate this value to seconds? Maybe period / rate-of-acquisition?
As a side note, Mark E promise to improve documentation on this function was not satisfied, as it appears very little has changed over CVI releases, so there's remains something to do in this respect
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Where can i find the sample instruments in logic pro x.the proper plugins

Similar Messages

Maybe you are looking for