Where can I find the source code of the sshr workflow source file?

Dear all:
Where can I find the source code of the sshr workflow?
Regards
Terry

Dear all:
I found the answer, usually the workflow of the self-service 4.1 is HRSSA
Regards
Terry

Similar Messages

Where can I find my proxy address and the printer code on the HP officejet 8500A Plus

where can I find my proxy address and the printer code on the HP officejet 8500A Plus

Hi TanaS,
I understand that you're trying to setup ePrint. Most users when setting up ePrint do not require entering a proxy address.
Are you having trouble setting up ePrint?
Are you getting an error message when you try to setup ePrint?

I purchased the Microsoft Office last September at an Apple Store. I recently had to bring my MacBook Pro back to the store because of some issues. Reboot caused me to lose Office and I no longer have the passcode. Where can I find my duplicate code?

I purchased the Microsoft Office last September at an Apple Store. I recently had to bring my MacBook Pro back to the store because of some issues. Reboot caused me to lose Office and I no longer have the passcode. Where can I find my duplicate code? I no longer have the receipt so I can not call the business to find my duplicate code. Looking back at my bank statements, this purchase was quite spendy so I hope I will not have to purchase it again if possible! Any advice would be great!

It should be on a stickerthat says product key on the inner sleeve inside the bos which the disc comes in.

Where can I find a guide to all the options and settings available via the "about:" pseudo-URL? (Using FF 3.6.8)

When I last used Firefox support, several years ago, I saw mention of a long list of options and settings available, using a kind of local URL, beginning with "about:". I can't find it now. The text "forums" that I saw then seem to have disappeared and been replaced by support for dummies who might be frightened if they saw a page containing more than just a tiny amount of information.
The question is: where can I find this guide, listing all the available options and settings so that I can make my own decisions?

I must have forgotten; it wasn't exactly FF support, but Mozillazine. '''Thank you for the pointer'''. The "long list" I was thinking of was in fact about:config, which is pointed to by that page.
Given all that, I think it should be easier to find Mozillazine from the FireFox support pages.

Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.

where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.
if there is no driver maybe you can tell me the closest instrument that comes to this one from the list at,
http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Hewlett-Packard%22&qt=peak+power+analyzer&layout=IDNet
so i could modify and use the driver

Hello,
It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
Hope this helps.
Scott B.
Applications Engineer
National Instruments

Where can I find out what each of the icons on Apple TV screen represents?

Where can I find out what each of the icons on Apple TV screen represents? Some cost $$, some are free.Help!

Where are you located.

Where can I find a full list of the Logic Pro X Software Instruments?

Where can I find a full list of the Logic Pro X Software Instruments (the ones you can play with a MIDI keyboard)? From what I've read so far, there are a number of new software instruments in the LPX additional content (as well as loops, etc, but I'm looking for the software instruments). I cannot seem to find this information in the product pages or documentation, though.
With older versions, I was able to find a list of all of the software instruments that came with the software, and all of the software instruments that came with the Jam Packs. Is that list available from Apple, or does anyone have one from somewhere else?

Hi Guys,
I exported my folders from a clean LPX install, does this give you what you want?
First one is the Patch instruments:
http://www.supportat.net/forumfiles/LPX_PatchInstruments.txt
This one is the sampler Instruments:
http://www.supportat.net/forumfiles/LPX_SamplerInstruments.txt
This is all the files:
http://www.supportat.net/forumfiles/LPX_AllFolders.txt

I rented a movie and the download was interrupted. Where can I find it again to resume the download?

I rented a movie and the download was interrupted. Where can I find it again to resume the download?

Try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Just downloaded DW CC. Bought expensive book that tells me to use "Expanded Workspace" but the only options I see in window or workspace button are "Design" Extract" and one other. No where can I find "Expand" or "Compact" which the books says are the two

Just downloaded DW CC. Bought expensive book that tells me to use "Expanded Workspace" but the only options I see in window or workspace button are "Design" Extract" and one other. No where can I find "Expand" or "Compact" which the books says are the two choices.

Glad to be of help .
I won't be spending any more money on expensive books now that I know you can't actually get one that applies to the latest version.
Don't get me wrong. I like books. Classroom in a Book series is an excellent resource to have. You will learn a lot from it. Just don't get side-stepped by Creative Cloud's update schedule. No publishing house can keep pace with it. If you stay informed about new releases from Adobe's "What's New" Blogs, you will get your money's worth out of your books. Online Help (F1) is another good resource to use since it is updated fairly often.
Nancy O.

Where can I find Videora iPod converter on the net?

Where can I find Videora iPod converter on the net?

I use videora. It's not the most elegant or
efficient product. I've run into some quirks and
frustrations, but it gets the job done. Why, Do you
know of an alternative?
3 GP is the most reliable and seems the fastest. Very easy to use.
http://www.nurs.or.jp/%7Ecalcium/3gpp/
The page is japanese but there is a link to the program in english. The program gives you an english option. Also, you can download it here.
http://www.digital-digest.com/software/download.php?sid=475&ssid=0&did=1
In addition, this program works better than videora.
Download here.
http://www.ipod-video-converter.org/

Where can I find a white paper describing the resampling algorithm?

Where can I find a white paper on the resampling algorithm?

There are some basic concept introductions about resampling in a shipped document, which is located at National Instruments\LabVIEW 2012\help\lveptconcepts.chm
The resampling algorithm is widely used in many other areas, whose signal processing principles are similar, such as the below reference,
https://ccrma.stanford.edu/~jos/resample/

HT3680 where can i find this program after reading the whole story?

where can i find this program after reading the whole story?

could this knowledge base article be what your looking for?:
HT3680

Where can I find "Crystal Type" code examples?

Morning all,
I have tried searching the forums but cant find much (I dont find the search thread function very helpful but that might just be me and is another story for another time).
I am trying to create my own formulars and functions on my report in CR4E, but I am have problems with the code.
Where can I find a tutorial on the basics like converting a date to a string or delcaring a date or changing a string to a date.
In Java one would do something like:
String str_MyString;
str_MyString = "This is a string";
but in a crystal report you do something like (and I might incorrect in even this simple example):
StringVar str_MyString;
str_MyString = "This is a string";
That slight difference of String and StringVar are the things I need to find out.
In VB I can refer to a forms fields with str_MString = me.txt_Field1 but in crystal I dont know how to refer to a current field of the report I am working with.
For example, I have a text box on my report which I have called "txt_MyNumber", I then want a formular or function to use the value that is found in that text box but cant work out to refer to it. I can refer to other formulars but not report fields. Is this even possible?
I know the report field question might be viewed as a whole new question thus thread but I feel they close enough to remain in the same thread.
So any help pointing me in the right direction.
Or am I just an idiot and should rather give up trying to design crystal reports. (Ive been thrown in the very deep end at work so am trying to work everything out all at once with no beginner knowledge)
Thanks all for help and suggestions.
Cheers
Darren

Thanks for the quick reply, Alphonse
Creating a UFL is what brought me to realise I am lacking in knowledge in the first place.
I created a UFL that converts numbers to words. I am going to be using this later for translating
transaction amounts into words in different languages.
As a test I created a simple resource bundle that held 1=one, 2=two and so on until 10.
My function is
get_numbers_to_words(String key, String resBundleName, String str_Locale)
So to test it I created a formula on in my report and used the following bit of code to test it.
str_Number_to_Words //formula name
get_number_in_words("1", "NumbertoWords", ContentLocale)
This works and gives me a return of "one".
So I then wanted to have a field on the report pass in the key. The field is called txt_Number, so i tried:
str_Number_to_Words //formula name
get_number_in_words({txt_Number}, "NumbertoWords", ContentLocale)
but clearly that did not work. I tried many other variables or ways of putting the value I hold in the
txt_Number field.
I have no way of using the value held by the text box txt_Number.
I then thought if I cant get a field to drive the key I will use something as simple as taking the current time
and use the seconds unit digit as the variable to dynamically change and gives more a better testing
ground so when I expand to the double figures I can use the seconds in general.
This is what made me put up this post.
With your first link you sent me, I am ashamed to say I dont really know how best to take that knowledge
and put it in practice. This is where my lack of knowledge shines through. I understand what most
methods and classes do from their descriptions and summaries and all that. But I am trying I promise.
All I need is for one example to be shown and explained how the concept gets taken from those Package
descriptions and into a working example I will be able to then work out how to use it for all the rest.
Take com.crystaldecisions.reports.common.value.DateValue for example.
If this last request is a silly request and a real waste of everyones time I totally understand and will start
looking other ways of learning this all. I will not hold it against anyone if they tell me to go back to "school"
and leave programming to real men/women.
Thanks Alphonse and also the rest fo you.
Cheers
New Edited part:
OK I am sort of getting somewhere. I have now got a function that can return the current time as a string
but the part to return only the seconds is not working.
Minutes_To_Number    //Function Name
Function (TimeVar curr_Time)
StringVar str_Minute;
str_Minute = CStr(Second(curr_Time)); // This does not seem to be returning the current seconds. Why?
//str_Minute = CStr(curr_Time); //If this is not commented out I get the current time, so I know its working
str_Minute;
Var_Number      //Formular name
Minutes_To_Number(PrintTime)
str_Number_to_Words   // Formular that I want to get working
// I want to pass the seconds into the Key field of my UFL function.
get_number_in_words({@Var_Number}, "NumbertoWords", ContentLocale)
Any ideas why the
Second(curr_Time)
does not return the seconds value?
Edited by: Darren Jackson on Sep 19, 2008 3:36 PM
Ok I have managed to work out why my code was failing.
It all boiled down to my use of "=" and not ":=". This being the type of Syntax differences I need to learn. Well guess I will just have to go through all the Example reports (found them after asking).
So Im going to close this thread as worked out the answers.
Cheers
Edited by: Darren Jackson on Sep 22, 2008 2:43 PM

Where can i find a Power Adapter for the IdeaPad A2109?

How are you?
Looking for another Power adapter for the A2109....
Havnt found the original in eBay...
Is anyone knows where can i find the Power adapter?
If not the original - is there any generic alternative that in good quality?
Any details? please feel free to provide!
Thanks a lot!!!
Solved!
Go to Solution.

b.t.w: charging is only by the USB port, am i right?
One of these could suite?
http://www.ebay.com/itm/New-Ariic-5V-2A-2000mA-AC-DC-USB-OUTPUT-Wall-Charger-for-Tablet-PC-Cell-Phon...
http://www.ebay.com/itm/5V-DC-2000mA-USB-Wall-Home-Charger-Adapter-Supply-MP3-MP4-EU-Plug-High-Quali...
http://www.ebay.com/itm/5V-1-5A-7-5W-EU-Wall-Mount-USB-Power-Adapter-Travel-Charger-Mobile-GPS-MP4-u...
http://www.aliexpress.com/item/Ainol-years-novo7-Ares-charger-5v-1-5a-usb-original-adapter/693452820...
http://www.aliexpress.com/item/For-UZONE-F6-advanced-WISE-Tablet-PC-5V-2A-USB-Plug-Power-Supply-Adap...
Is it right that a lower ampere in the adapter = better battery life?
Thanks for all of your help!

Where can I find a downloadable benchmark for the MacBook Pro?

I have a 2013 MacBook Pro and a 2006 Mac Pro. I am thinking of dumping the Mac Pro and make my MacBook my one and only computer. I want to run a benchmark on each system to see what I am trading off with this plan. Where can I find a downloadable benchmark for a Mac running OS X?

Geekbench -> http://www.primatelabs.com/geekbench/.
Clinton
MacBook Pro (15-inch Late 2011), OS X Mavericks 10.9.5, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

Where can I find a user-guide for the awfull Text-Editor used to enter/edit these forums entries?

I am desesperate to understand how quite basic functions (just as one of many examples: how can I paste text, that I have formatted in MS Word and want to paste into a Forum Post-Entry?) can be done with the primitive and awful Text Editor used to enter/edit Forum Entries. Notice, that like many other Adobe users, I am not familiar at all with HTML and it is therefore a description of the badly named "Full Editor" that I am looking for.
Where can I find a User-Guide for this Text Editor?
My recommendation to Adobe: exercise enough brute pressure on the developers of this primitive Text Editor to force them to provide something more reasonable, more powerful and more intuitive.

Thank You Jochem
I was trying to understand how I could do things as simple as inserting text that I had previously copied. Since there are neither command menüs nor buttons for the Insert of previously copied text, I was trying a mouse right click.....and was being offered in the context menu the choice between "Insert Link", "Insert Image", "Alignement", and "Insert Table"....... but no possibility of a plain insert of previously copied text.
Now, I realize, that Clearstream supports at least the keyword shortcut of "Ctrl V" ........that I am not using in any other software (I never use any keyboard shortcuts).
Since Clearstream does not support reasonable choices in the contextual menus, I will need to memorize the most important keyword shortcuts.
By the way: I detected now, that the "Ctrl V" keyboard shortcut allows me to insert formatted text.
Even, if I will now begin to be able to use reasonably Clearstream, I am quite surprised to see that such a software provides neither reasonable Contextual Menus, nor a User Guide, nor........
Thank you again Jochem for your patience with me.

Where can I find the source code of the sshr workflow source file?

Similar Messages

Maybe you are looking for