Where can I find the Stickies database (content). I recovered my hard drive from Time machine and need to load old data.

Where can I find the Stickies database (content) in OS 10.8 and above. I recovered my hard drive from Time machine and it loaded the app but not the content.

How to Recover StickiesDatabase From Time Machine

Similar Messages

Can I backup an External Hard Drive using Time Machine and Time Capsule?

I have a Powerbook G4 with Mac OS X 10.5.2 and use an external hard drive *all the time*. I'd like to use Time Machine and my new 500GB Time Capsule to back it up along with the internal hard drive. Can I do this? Thanks for your help.

I believe so; this thread indicates how. Hope this helps.

Where can I find the bug database?

I was reading through the release notes for 2.4.16 and saw a reference to bug #16288 might have bearing on a problem I'm having. Would anyone know where I could find a detailed description of this bug? Also, if I find something that looks like a bug in the Berkeley DB XML, where would I send my report?

Hello,
Your problem is definitely [#16288] (see response on another thread). As Lauren said there is no publicly available bug database. Report them here and if you have a question about something from the changelog post that here as well, as you did.
Regards,
George

Can I use the same external hard drive for time machine and storing other files

I have a 640GB external hard drive that I have been using for over a year for time machine backups. My mac hard drive is now starting to fill up and I am looking to move audio, video and picture files to my external hard drive. How do I do this without messing up my time machine backups? Can I do both on the same external hard drive? Do I just make new folders on the external hard drive to move the files I want? Thanks for the help.

If you move the files you will need to get another disk to back the files up to. You don't want to have only one copy of certain files (personal, professional etc.).

How to retrieve a backup of an external hard drive from time machine if there is a drive failure of the external HD?

Hi,
I have a time caspule that I use as my backup for Time machine.
My itunes folder is on an external drive and When I do my backups, I connect my external to my mac so that my itunes folder will be backed up.
When I do the back up, I know its backing up the external due to the size of the backup.
but if my external were to fail, how do I retrieve the back up of the external? From what I can tell the drive has to be connected to the mac when connecting to time machine to access the back up files for the external. But if the drive is dead, how do I retrieve my files?

budden10, please try this:
Disconnect the external drive to simulate it not working or having failed
Open Time Machine on your Mac and wait a few minutes for your backups to load fully
Go back in time and select a date when you were backing up the external drive
Now look at the Finder window and locate your Mac on the left side of the window under DEVICES
Click on your Mac
What do you see in the window there just to the right?

How can you tell which files have backed up to external hard drive using Time Machine?

Hello Mac Users,
I have Macbook Pro (early 2011) and recently purchased a WD My Passport for Mac external HD. I have completed a back up using Time Machine, however how do I tell what files actually were backed up? I have a ton of audio, documents and photos that I would like on there. Its a 2 TB HD, my memory is 750 GB... Im using 632. At end of back up, the drive still had 1.88 TB left. Any help would be appreciated! Thanks
Linz19

This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
tmutil compare | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take several minutes to run. Wait for a new line ending in a dollar sign ($) to appear below what you entered.
A TextEdit window will open with the output of the command. Don't post all the output; just read it yourself. Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
Files that you’ve excluded from backup, or that are excluded automatically, are ignored.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.
Caution: Under some conditions, tmutil may falsely flag files as not having been backed up when in fact they have been. It can be confused by multi-linked files, or by files with a modification date earlier than the one in the snapshot. This will not be an issue for most users. If the results of the above procedure surprise you, inspect your snapshots directly.

How can i change my hard drive from time machine to a normal harddrive

Hi guys I wrongly set my flash drive to my time machine drive but now i can not turn it back as the same it was at first . the main problem is PC are not able to identify my flash drive?

First transfer any important information on the flash drive to your internal hard drive. Then open Disk Utility. You should see your flash drive in the list on the left, select it and then select the erase tab to the right. Name your flash drive and set format to MS-DOS (FAT). Hit the erase button and it will be ready for pc and mac.
Message was edited by: Buda71

Can't restore new hard drive from time machine back up

Looking for some help on this one....
Briefly: iMac 24" aluminium early 2008 (model 2134) trying to upgrade the original 320 gb HDD. So I bought a WD Caviar Black 64 mb, 6gb/s 1Tb drive, intalled it pretty smoothly and then using an install disc restored it from a time machine back up. That went fine then I could not restart the mac (kernel panic). So i trouble shooted with an extended hardware test, disk repair and everything seemed fine. I reinstalled my old HDD again and worked perfectly so I figured my iMac doesn't like this Caviar (due to sata3 perhaps??) so I went and bought a Seagate barracuda sata2 1 TB 7200 rpm and repated the whole process. Again everything went super smooth until the restoring process ended and the iMac was restarted. Kernel panic again. Already tried PRAM, option key. Booting from the CD or my old drive is not a problem at all but from the newly installed drive (x2) ... Impossible
Any thoughts ???
Thanks

Booting from the CD or my old drive is not a problem at all but from the newly installed drive (x2) ... Impossible
Disconnect all peripherals from your computer except for the keyboard and mouse. Double check to make sure that you installed the hard drive correctly - http://www.ifixit.com/Guide/Browse/iMac#SectioniMac_Num20
Select your imac then select hard drive replacement, and there are the instructions.
Video instructions - http://www.youtube.com/watch?v=QzuBW3mu7LI and http://www.youtube.com/watch?v=EVzYXgUhygI

Where can I find the 'club' database sample used in the 'Information Design Tool' tutorials?

Hi experts!
I have been studying the tutorials for the Information Design Tool (http://scn.sap.com/docs/DOC-8461) and in some of them they use a database called 'club'. For what I see, this is an Access 2007 database and has some tables called City, Region, Customer, etc. I have been searching it across the web and have not found it.
Hope somebody knows where I can find this sample.
Thanks in advance!

Hi Julio,
You should be able find it in following locations
If you are on 64 Bit OS
C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\Samples\webi
If you are on 32 Bit OS
C:\Program Files\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\Samples\webi
Kuldeep

Where can I find the column declarations of table X$BH? or X$ tables?

Hi all,
does anyone know where can I find the column declarations for each X$ tables?
I did some googling and with no luck.
So, hoping that I can get some help here!
Thanks in advance!

PhoenixBai wrote:
does anyone know where can I find the column declarations for each X$ tables?X$ tables are not "real" tables. They are similar to the +/proc+ file system on Linux that looks like a file system with directories and files, but is actually a view into kernel memory structures.
X$ tables are a view of internal Oracle kernel memory structures. And you need to be careful how you use these - not just how you interpret the data in them. Some structures when touched (using a select against that X$ table), will actually reset the values in the struct. (e.g. <i>X$KSMLRU - LRU flushes from the shared pool - (7.3 - 8.1) [ID 43600.1]</i>).
The basic question you need to ask yourself is what are you looking for using the X$ views into the internals of Oracle? Why are you not using the V$ and GV$ views instead? - these are what 99% of all dba admins and experts and tools use. The times that one need to dig into X$ views (that are mostly undocumented and can have major changes from version to version) are very rare. And requires at least some basic knowledge of how databases and operating systems work internally.

Where can I find the pin-outs for 8-pin remote Hirose connector?

Where can I find the pin-outs for 8-pin remote Hirose connector?

Pin outs and wiring info is all in the Maintenance Manuals (same for all system cameras, F series, XDCAM etc.), - ask your local Sony Office if you want the info.The 8pin remote is for connection to the Sony RM-B150/170/750 remote control panels.For system cameras the same protocol is used between RCP panels, MSU, CCUs and camera heads.It is a proprietry system so extremely difficult to hack!The RM-B170 is the ideal panel to work with the PMW-F5/55. It will give basic painting control of R/B white & black painting, Master Pedestal, and Iris with the correct lens (Cabrio etc). It can also control remote Rec stop start.Regards, Clive. Sony ANZ.

Where can I find the OCA drivers for 8i database?

Where can I find the OCA drivers for 8i database?
I don't have the developer disks...
Please help me...

Hi
I think you didnt search on the Toshiba European driver page!
Why?
I checked the page and found the XP drivers for Sat L350D PSLE8E!!!
Here you can find the Toshiba European driver website!
http://eu.computers.toshiba-europe.com/ -> Support & Download -> Download Drivers
Just one hint; before you would post an question please use the Advanced search of this forum because most questions have been already answered!!!
Bye

Where can I find the content of my iCloud so I can delete stuff?

Where can I find the content of my iCloud so I can delete stuff I do not want?

Hello ther,e Purplesusieq.
The following Knowledge Base article offers up some great information in regards to Managing your iCloud storage:
Manage your iCloud storage
http://support.apple.com/kb/ht4847
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Where can i find the Content Guide of OBIA 7.9.6.4?

I appreciate if you tell me where can i find the content guide of OBI Apps 7.9.6.4?
regards

A google search reveals this link - Oracle Business Intelligence Applications Documentation Library
Also see MOS Doc 1527475.1

Where can i find the created group in portalcontent of content admin?

Hi all,
I have created a group with name Group1. I assigned some users to the group one by one. Is there any method to add 5 users at a time?
How can i store the created groups in the folder & where can i find the Group1in the portalcontent?
thanks & regards,
vila

You can assign multiple users to a group by using the User Data Import option. Navigate to User Adminstration --> Import.
Create a file with the following entries and upload it for group assignments
[Group]
gid=YourGroupName
gdesc=...
user=User1;User2;User3...
To know the users assigned to a group,
1. Navigate to User Administration --> Identity Management.
2. Put your group name and search.
Regards,
Prasanna Krishnamurthy

Where can I find the Stickies database (content). I recovered my hard drive from Time machine and need to load old data.

Similar Messages

Maybe you are looking for