Where can I find the Windows Captivate 5.5 download file?

Greetings!
We are currently still using Captivate 5.5. We will be upgrading in 2013 to 6.
My fellow producer and myself just had new hard drives installed and need to reinstall Captivate 5.5.
We own a downloaded upgrade from 4.
We have both reinstalled 4 and need to run the upgrade to get us back to 5.5 but the file is nowhere to be found on Adobe's site.
Suggestions on how we can get it?
Thanks!

Hello,
Welcome to Adobe Forums.
Please send you Captivate 5.5 License Information (Serial Number or Order Number) to [email protected] and I will make sure that you have Captivate 5.5 Installation Setup.
Thanks,
Vikram

Similar Messages

Where can I find the windows 8.1 product key

Where can I find the windows 8.1 product key for my HP Pavilion Model p7 – 1451. The HP came with windows 8 pre-installed and then I upgraded to windows 8.1 on-line free from Microsoft. I need the windows 8.1 product key to upgrade to windows 10.

Hi,
The key is in the BIOS of your machine, please use the following tool to get it:
http://www.belarc.com/free_download.html
When run this tool, it produces a report, scroll down to Software Management section. Windows 8 or 8.1 product key is in there.
You can also use the following tool to find out:
https://www.magicaljellybean.com/keyfinder/
Regards,

Where can I find the plugin to open camera raw files for Nikon D810 for Photoshop CS5.1? I've looked around the site but cannot get this to work.. Thank you.

Where can I find the plugin to open camera raw files for Nikon D810 for Photoshop CS5.1? I've looked around the site but cannot get this to work.. Thank you.

See for yourself which version of ACR is needed for that camera’s RAW files
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
then check your version (Photoshop > About Plug-In > Camera Raw).
Your version of Photoshop does not support that version of ACR.
You could use the free DNG Converter.

Where can I find the Java SE 6 runtime download so I can get Adobe Photoshop CS5 up and running again.

Where can I find the Java SE 6 runtime download so I can get Adobe Photoshop CS5 up and running again. I have to go this route. Currently on my Mac, I need to be running Java 7.65 for work-related stuff. I went to the Java site, but could not find anything that simply says "Java SE 6 runtime" ... Or, is there another way to get CS5 up and running with my recent Yosemite download?

No, I can't go that route. I have to stick with my current Java 7.65 ... Our IT department said just to download SE6 Runtime separately ... If I was understanding that correctly. Or, can you have two different versions of Java running ... 6 ... and 7.65?

HT204370 where can I find the movies I rented and downloaded last night

i downloaded 2 movies to watch on flight, downloaded to computer. Now have iPad with me. I don't see the movies in library/anywhere in iTunes/cloud so tried to re-download, received message that I had already rented. where can I find the movies?

If you rented and downloaded them on your computer's iTunes then did you then connect the iPad to your computer and move them over to it ? If you did then they should be in the Videos app.
Rentals are a one-time only download so they won't appear in the cloud for re-downloading.

HT201320 i have set up my email on have (7) messages on the mail icon but when i press it the home screen comes up to set up a new email. Where can i find the emails that have been downloaded...again, it shows that i have 7 new emails??

I have set up my email on the iphone. On the mail icon it shows that i have 7 new emails. When i press the icon the set up home screen comes up....gmail, yahoo, aol, etc. where can i find the new emails that have been downloaded??

Google stopped supporting Exchange for free accounts as of 1/31/13. If you already had it set up that way on the device, it will continue to work. However, if you didn't, you'll need to set it up as a regular Gmail account.

Where can I find a windows-esque screensaver to download?

I'm afraid to say that I still prefer the normal windows screensaver to the normal apple's screensaver. Apple's screensaver takes WAY too much processing power when Window's doesn't at all, and apple can't show the pictures normally, they have to stretch everything to fit the screen, which makes small pictures really blurry. Does anyone know of a good = BETTER screensaver program i can download that will still let me pick the pictures I want to put in, but won't stretch or distort them?

Hello Sarah & Welcome to Discussions,
You can choose any photos you want and the Apple screensaver will let you show them no problem.
It also has settings that allow you to determine how the image will be displayed.
Go to:SystemPreferenes>Scrren Effect
choose screensaver and from there you can choose the folder that contains all the pictures you want to view. Once that is done, highlight ONE photo in the folder and from there you will have a small pull down menu located in the middle of the screen that will allow you to choose say: tile, stretch and so on.
Good luck
Mic

Where can i Find the ESN/MEID/IMEI number to file an insurance claim

I am trying to find the number for the Samsung Galaxy S3 and the phone was lost.

Log into your MyVerizon, go to Manage My Device and you should see your device ID there.
Unfortunately that appears to only be the SIM ID #. Possibly by calling CS they would have it.

7.0.3 safari.....always can't find the server....downloading files doesn't come too handy!!!!

is there a way to fix this problem? it so frustrating.....i love safari browser.......from viewing clips on you tube,downloading,searching is not that easy anymore...watching clip an error occured.....downloading it takes a minute then....expands to hours and even days!!!! then it will stops...if you resume same results.....searching always cant find the site or server.....takes too long to load a server...alaways on a gray....can anyone has a solution to this problem....hope apple has a way for this...and im not the only one got this type of issue......hope apple respond...tnx!!!!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; BI () { $PB\ :CFBundleIdentifier "$1"; }; LC () { $2 launchctl list | awk 'NR>1 && !/0x|\.[0-9]+$|com\.apple\.(AirPortBaseStationAgent|launchctl\.(Aqua|Background|System))$/{print $3}' | grep -Fv "$1"; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"and $((l-25)) more line(s)"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps Model; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^EO]|x([^8]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm POST; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/s/^.*://p' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;/Apple|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm Heat; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=; fdesetup status | grep -q On && o=On; Ps FileVault; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel log"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; bi=`egrep '\.(kext|xpc)/(Contents/)?Info.plist$' <<< "$sys" | while read i; do [[ -f "$i" ]] && BI "$i"; done`; o=`kextstat -kl | grep -Fv "$bi" | cut -c53- | cut -d\< -f1`; Pm "Kernel extensions"; li=`egrep 'Launch[AD].+\.plist$' <<< "$sys"`; jl=`while read f; do [[ -f $f ]] && $PB\ :Label $f; done <<< "$li"`$'\n'"$bi"; R && o=`LC "$jl" sudo`; Pm Daemons; o=`LC "$jl"`; Pm Agents; o=`for d in {/,}L*/Lau*; do M; done | grep -Fv "$li" | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; p=`lsbom -pfc /var/db/*/*.BSD.bom | sed -En '/peri.+\/.+\./s/^\.\/[^/]+//p'`; [[ "$b" && "$l" && "$p" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do i="$d"/Info.plist; [[ -f "$i" ]] || continue; ID=$(BI "$i") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Shared libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -exec cksum {} \; | awk '{print $3"\t"$1}' | grep -Fv "$p" | awk '{print $1}'`; Pm "Periodic scripts"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=; defaults read /Library/Preferences/com.apple.alf globalstate | grep -q 0 || o=On; Ps Firewall; o=`scutil --proxy | egrep 'Prox.+: [^0]'`; Pm Proxies; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm TCP/IP; [[ "$I" =~ [AW]i ]] && { o=`/S*/*/P*/*/*/*/*/airport -I | awk '/lR/{print $2}'`; o=$((o<=-87?o:0)); Ps RSSI; }; R && o=`sudo profiles -P | grep : | wc -l`; Ps Profiles; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc hosts <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "App check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`find .??* -path .Trash -prune -o -type d -name *.app -print -prune`; Pm "Hidden apps"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font issues"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps UID; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Where can I find the CS5.5 Design Standard download?

I already have my serial number from Adobe. All I see available for download is the Premium version.

Assuming you purchased from Adobe directly the following steps should allow you to download your software.
Log in to your Adobe account to download your software.
Go to the Adobe Store for your country and sign in with your Adobe ID and password.
Click My Orders and then My Order History.
Locate the order number, and click the Download link in the Downloads column.
Start the download by doing one of the following:
Click Download and follow the onscreen instructions.
Click Akamai Download Manager and follow the onscreen instructions.
Click Alternate Download Method, and then click the .7z and .exe files (Windows) or the .dmg file (Mac OS) to download the software to your computer.

Where can I find the discontinued Adobe SVG Viewer download at?

I have a pice of sortware that requires the discontinued Adobe SVG viewer (Jan 1, 2009) My software is no longer supported.. There's viewer that no longer works because I don't have your discontinued software. Is there any way that I can get a copy? Thanks, Steve Koonter

Do these help at all, there seem to be downloads?
http://www.adobe.com/devnet/svg/adobe-svg-viewer-download-area.html
http://solutionpartners.adobe.com/svg/viewer/install/

Where can I find the fn.tld libraries for download?

I cannot find this tag library anywhere?
Although Sun posts the functions as part of the api documentation, it doesn't seem to be available for download anywhere... It's not included in the jstl.jar, or the standard.jar files...
Any insight would be appreciated...

JSTL 1.1 : requires a JSP container that supports the Java Servlet 2.4 and JavaServer Pages 2.0 specifications.
JSTL 1.0 : requires a JSP container that supports the Java Servlet 2.3 and JavaServer Pages 1.2 specifications.
fn.tld is a part of JSTL 1.1 !
you're server supports JavaServer Pages 2.0 ?
hava a look at this : http://jakarta.apache.org/taglibs/doc/standard-doc/intro.html

HT1657 Where can i find the movie i have already downloaded from itunes on my ipad ?

Some part make me confused :((

If you've downloaded it on the iPad or synced it from your computer's iTunes then it should be in the Videos app (iTunes on the iPad is just the iTunes store) :

Where can i find the directiond for how to download pics from my pc to my ipad

I have saved a file on my desktop on my pc of some pictures i want on my ipad..... how do i get them moved to my ipad?

There are instructions for syncing photos from your computer to the Photos app here : http://support.apple.com/kb/HT4236

Where can I find the Lion 10.7.0 upgrade to download, Where can I find the Lion 10.7.0 upgrade to download

I need to upgrade from Snow Leopard to Lion, so where can I find the Lion 10.7.0 download?

You have to call Apple to buy a download code: 800-MY-APPLE in the US.

Where can I find the Windows Captivate 5.5 download file?

Similar Messages

Maybe you are looking for