Where can I find thsi: j2eetutorial/examples/src/ejb/converter

Hi all,
First I want thank you for your time.
Second I have downloaded J2EE but not found the following file.
j2eetutorial/examples/src/ejb/converter
Where is it? Sun says it will be generated when I unpack the software. No! it did not.
Thank you again
JamesL

Have u also set up docs which comes with j2ee server? After docs re installed in same dir as J2EE_HOME u can find examples from directory:
J2ee_HOME/docs/guide/ejb/examples/converter
ok?

Similar Messages

Where can I find XML component examples ?

where can I find XML components examples ?

Here are a couple video tutorials using XML with Flash:
http://www.gotoandlearn.com/play?id=64
http://www.gotoandlearn.com/play?id=65
Don't know if they're what you're looking for but worth a
look.

JWSDP - Where can I find 1.0 example apps?

Hi,
I'm trying to learn J2EE so I downloaded the JWSDP 1.3 exe. Unfortunately, the bookstore examples use JSP 2.0, which we aren't using in our environment. We are old school.
I have downloaded the 1.0 tutorial in PDF but I can't find the corresponding examples anywhere on the SUN site. It's frustrating.
Anyone know where I can find them?
Thanks,
Ed

http://java.sun.com/webservices/downloads/1.0/webservicestutorial_1.0.html

I'm a begineer on Apple development. Where can I find a good example for starting my project?

I'm starting developing apple applications on Xcode4. Is there a place were I can find some simple examples?

Log on to the Dev Center if you've signed up for Mac or iOS apps and go thru the getting started guides and videos. Visit iTunes/iTunes U and check out the wide range of videos there....grab the 2011 WWDC videos, etc.
Know that documentation in the Dev Center is reference, not tutorial. The guides show how things work together and the sample illustrate various technologies.
Good luck in any case.

Where can I find a cheap DVI to ADC converter??

Anyone know where I can find a cheap DVI to ADC converter for use with my 15" ADC display and my G5?
Is it worth buying from the USA? If so will I need to convert the power supply etc?
Cheers

Hmm, OK, just googled.
http://www.cs.indiana.edu/~ysimmhan/misc/pub/mp32au
Looks like it needs xaudio (or any MP3 player that can dump raw to standard out) and Sox

Where Can I find Nonlinear Calibration Example.llb?

Hi,
I have LV 2010 and 2012 installed with Vision Development Module 2010 and 2012. I have looked everywhere for Nonlinear Calibration Example.llb but cannot find it. It is supposed to be at Examples\Vision\2. Functions\Calibration. I have checked two other computers that have LV 2010 and VDM 2010 installed and they are missing this llb as well. Can someone let me know where I can download it? Thanks!
Steve
Solved!
Go to Solution.

Attached is the shipped example.
Regards,
Isaac S.
Applications Engineer
National Instruments
Attachments:
Calibration.zip ‏264 KB

Where can I find good jsx examples? (more than Adobe's)

1. Any good list of places to find Adobe Illustrator JSX examples?
2. Any reason why Adobe can't provide examples that use all of the basic commands. For example, in Adobe's Javascript examples (/Applications/Adobe Illustrator CC/Scripting.localized/Sample Scripts.localized), there's no usage of PlacedItem.
3. Any examples of using PlacedItem with a move to a given coordinate? I simply want to click the upper left corner of the transform positions, then put 0 in x and 0 in y, in the toolbar.
4. I'm guessing I'll use PlacedItem.transform but there's also PlacedItem.move

Just take a look at this tool: ExtendScript toolkit.
You could find it here:
http://www.adobe.com/devnet/scripting.html
This will help you.
Thomas.

Where can I find xml - Flash examples?

I know enough about xml to be dangerous. Does anyone know of
a source of for adding deleting / editing xml files using Flash
where I can see examples that actually work?
Free is better but I'm willing to pay.
thanks,
Mike Rice

Here are a couple video tutorials using XML with Flash:
http://www.gotoandlearn.com/play?id=64
http://www.gotoandlearn.com/play?id=65
Don't know if they're what you're looking for but worth a
look.

Where can I find C++ source examples for interfacing with a PC-DIO-96 PnP DAQ card?

I am a C++ software developer who needs to be able
to use the PC-DIO-96 PnP card to communicate with Special Test Equipment in order to measure and adjust voltages. My Operating system is Windows NT. I am not exactly sure where to start...
Thank you for any help,
Tim

This is a Measurement Studio forum, you should post Digital I/O questions to the digital I/O section of Developer's Exchange here. You should be able to find C examples that will work in Visual C++ in your NI-DAQ software directory. If not, go back through the installer and select Visual C/C++ support.
Best Regards,
Chris Matthews
National Instruments

Where can I find some program examples?

Thanks!

hy
have a look at
- http://www.javaworld.com/javaworld/jw-07-1999/jw-07-javacard.html
- http://java.sun.com/docs/books/javacard/
- http://www.wrankl.de/Java/JavaE.html
- http://wireless.java.sun.com/javacard/articles/intro/
- http://www.zurich.ibm.com/jcop/download/tools/samples.html
- http://www.javacard.info/html/downloads.html
- http://www.informit.com/content/index.asp?session_id={D12D4E05-2C0E-4F16-A634-D1C6F73DEF20}&product_id={24E86028-7C53-473B-9C21-20F4FC4024BA}
if you want to get a development tool including javacards, the best choice is the demo package of ibm zurick.
you get the jcob tools including 2 jcop javacards for about Euro 48,-
link: http://www.zurich.ibm.com/jcop/order/tools.html
snoopy

Where can i find uix "template inheritance" examples?

I have learnt Jdev10g documentions about "templates inheritance" ---- "14. Includes and Templating in ADF UIX". But i wonder how to use this powerful features of Jdev10g.
Anybody know the details, or anybody know where can i find "template inheritance" examples? Tell me please.
Thanks in advance
Shucheng Ma

Chapter 14. Includes and Templating in ADF UIX in the developers guide takes the reader through the process of creating a template step-by-step.
Once completed, the template can be considered as just another UIX component that happens to have been defined declaratively.
With template inheritance, where one template extends another template, but the syntax is identical so the steps described in the devguide are identical.
If you have specific questions, please post them to the forum. However, it is strongly recommended that you go back to the devguide and actually work through the example to gain a better understanding of this feature.
Kind Regards.

J2EE Tutorial - Can't find directory j2eetutorial

Hi!
I’m doing the J2EE tutorial. I have installed j2sdk1.4.2_14 but I can’t find directory \j2eetutorial\examples\src\.
What I should download or may be run?
Any help would be great!
Thanks in advance,
Boris

The Directory Server 6 Evaluation Kit has not been posted to the Big Admin web site yet.
I don't have an estimated date for its availability. It is almost there but the couple of field engineers who have been producing it have limited time to work on it for the moment.
Regards,
Ludovic

Where can I find JBI examples

I installed JBI sdk. There is a examples directory. But the examples it offered are not a java-based program. I couldn't find any java files under it and I didn't know how to use the jbi api. All of them are made by XML file. Where can I find a java-based JBI example?
Thanks.

Not sure what you mean by installing the JDI sdk, but if you didn't download and install the OpenESB/Netbeans installer, I would recommend installing that instead. You can get it here: https://open-esb.dev.java.net/Downloads_OpenESB_Addons_NB6.html
There are some BPEL examples included in netbeans. Create a new project in netbeans and Go to Samples > SOA. I believe they are under the BPEL folder and there are 5 blueprints.
For other components, you can reference videos. Most components available here have videos showing you how to use netbeans and openesb to create Composite Apps.
http://wiki.open-esb.java.net/Wiki.jsp?page=Jbicomps
Specifically I learned netbeans/jbi by following the SMTP tutorials included in this blog: http://blogs.sun.com/vishblogs/.
Hope that helps.

Where can I find an example of a vi which reads a xml file using the Labview schema (LVXMLSchema.xsd)?

Where can I find an example of a vi which reads a xml file using the Labview schema (LVXMLSchema.xsd)?
�Unflatten From XML� is of little use in parsing because it requires the data type. So it seems that the user has to parse each data value, and then �Unflatten From XML� can help a little.
I would like to see NI provide a VI for parsing it�s own schema.

LabVIEW's XML functions are another way of saving data from controls and indicators that is in a more standardized format. If you look at the Unflatten From XML shipping example, it shows taking the data that you would normally send to a Digital Wveform Graph and converting it to XML instead. This data is then unflattend from XML and wired to the graph. Since you know what you wrote to the file, this is an easy thing to do. If what you are looking for is a way to look at any data in any LabVIEW XML file, then you are right, there is not a VI for that. However, I do not believe that that was the intention of the XML functions in the first place.
By wiriting data in XML, this allows other applications outside of LabVIEW to parse and recognize the dat
a. In LabVIEW, you would already know the types and can place a generic item of that type. The issue of knowing the type is that you need to know the type of the wire that comes out of the Unflatten function so that the VI will compile correctly. You could always choose a variant value to unflatten and then do some parsing to take the variant a part. Maybe this will help you out.
See this example for using the Microsoft parser for XML. (http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_guid=B123AE0CB9FE111EE034080020E74861&p_node=DZ52050&p_submitted=N&p_rank=&p_answer=)
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

Where can I find "Crystal Type" code examples?

Morning all,
I have tried searching the forums but cant find much (I dont find the search thread function very helpful but that might just be me and is another story for another time).
I am trying to create my own formulars and functions on my report in CR4E, but I am have problems with the code.
Where can I find a tutorial on the basics like converting a date to a string or delcaring a date or changing a string to a date.
In Java one would do something like:
String str_MyString;
str_MyString = "This is a string";
but in a crystal report you do something like (and I might incorrect in even this simple example):
StringVar str_MyString;
str_MyString = "This is a string";
That slight difference of String and StringVar are the things I need to find out.
In VB I can refer to a forms fields with str_MString = me.txt_Field1 but in crystal I dont know how to refer to a current field of the report I am working with.
For example, I have a text box on my report which I have called "txt_MyNumber", I then want a formular or function to use the value that is found in that text box but cant work out to refer to it. I can refer to other formulars but not report fields. Is this even possible?
I know the report field question might be viewed as a whole new question thus thread but I feel they close enough to remain in the same thread.
So any help pointing me in the right direction.
Or am I just an idiot and should rather give up trying to design crystal reports. (Ive been thrown in the very deep end at work so am trying to work everything out all at once with no beginner knowledge)
Thanks all for help and suggestions.
Cheers
Darren

Thanks for the quick reply, Alphonse
Creating a UFL is what brought me to realise I am lacking in knowledge in the first place.
I created a UFL that converts numbers to words. I am going to be using this later for translating
transaction amounts into words in different languages.
As a test I created a simple resource bundle that held 1=one, 2=two and so on until 10.
My function is
get_numbers_to_words(String key, String resBundleName, String str_Locale)
So to test it I created a formula on in my report and used the following bit of code to test it.
str_Number_to_Words //formula name
get_number_in_words("1", "NumbertoWords", ContentLocale)
This works and gives me a return of "one".
So I then wanted to have a field on the report pass in the key. The field is called txt_Number, so i tried:
str_Number_to_Words //formula name
get_number_in_words({txt_Number}, "NumbertoWords", ContentLocale)
but clearly that did not work. I tried many other variables or ways of putting the value I hold in the
txt_Number field.
I have no way of using the value held by the text box txt_Number.
I then thought if I cant get a field to drive the key I will use something as simple as taking the current time
and use the seconds unit digit as the variable to dynamically change and gives more a better testing
ground so when I expand to the double figures I can use the seconds in general.
This is what made me put up this post.
With your first link you sent me, I am ashamed to say I dont really know how best to take that knowledge
and put it in practice. This is where my lack of knowledge shines through. I understand what most
methods and classes do from their descriptions and summaries and all that. But I am trying I promise.
All I need is for one example to be shown and explained how the concept gets taken from those Package
descriptions and into a working example I will be able to then work out how to use it for all the rest.
Take com.crystaldecisions.reports.common.value.DateValue for example.
If this last request is a silly request and a real waste of everyones time I totally understand and will start
looking other ways of learning this all. I will not hold it against anyone if they tell me to go back to "school"
and leave programming to real men/women.
Thanks Alphonse and also the rest fo you.
Cheers
New Edited part:
OK I am sort of getting somewhere. I have now got a function that can return the current time as a string
but the part to return only the seconds is not working.
Minutes_To_Number    //Function Name
Function (TimeVar curr_Time)
StringVar str_Minute;
str_Minute = CStr(Second(curr_Time)); // This does not seem to be returning the current seconds. Why?
//str_Minute = CStr(curr_Time); //If this is not commented out I get the current time, so I know its working
str_Minute;
Var_Number      //Formular name
Minutes_To_Number(PrintTime)
str_Number_to_Words   // Formular that I want to get working
// I want to pass the seconds into the Key field of my UFL function.
get_number_in_words({@Var_Number}, "NumbertoWords", ContentLocale)
Any ideas why the
Second(curr_Time)
does not return the seconds value?
Edited by: Darren Jackson on Sep 19, 2008 3:36 PM
Ok I have managed to work out why my code was failing.
It all boiled down to my use of "=" and not ":=". This being the type of Syntax differences I need to learn. Well guess I will just have to go through all the Example reports (found them after asking).
So Im going to close this thread as worked out the answers.
Cheers
Edited by: Darren Jackson on Sep 22, 2008 2:43 PM

Where can I find thsi: j2eetutorial/examples/src/ejb/converter

Similar Messages

Maybe you are looking for