Where can i get a 45 Degree angle adapter for the laptop end of the G6 power supply.

I am annoyed by the power cord sticking out at 90 Deg from the right side of my G6 Notebook . the plug obstructs the usb mouse and i am looking for a 45 Degree adapter to solve this problem.
If HP make one of these then where / what site can i get it from .
If HP do not make this type of adapter than can anyone let me know if they have seen a website so i can buy one.

What is the exact model of the notebook?
I am not certain about a 45 degree adapater, but most adapters are either straight or 90 degrees.
Here is a list of various adapters.
Even though the adapter you have may be at a 90 degree angle, it should be able to rotate to where the cord is not blocking any necessary ports.
Let me know the exact model and product number so I can give something that is a little more specific.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Where can I get Oracle 8i 8.1.5 for Linux (RH 6.0) On CD?

I'm stuck in a 28.8 baud neighborhood. Most of my connections
are 14.4 but at night - sometimes - I can get 28.8. There is no
Cable Modem support (Not available), not DSL (maybe by Q1 2999),
and ISDN is foolishly priced ($1800.00 to start and $300.00 per
month.) I have a smalll 100/T Base network with Win95, WinNT
4.0 (Server and Client) and Red Hat 6.0 Linux. I'd really like
to get Oracle 8i 8.1.5 Server for the Linux box and access it
via my NT Client. But, as I mentioned above, downloading is
very impracticle. It would take +100 hours and we have
power/phone outages almost every day. Where can I get this
stuff on a CD?
Thanks
Jeff Schwartz
null

On the oracle store (oraclestore.oracle.com->database->media)
you can order a trial copy for $40 ($39.95). Allow me to ask you
where do you live? I wouldn't like to move into your
neighbourhood.
Jeff Schwartz (guest) wrote:
: I'm stuck in a 28.8 baud neighborhood. Most of my connections
: are 14.4 but at night - sometimes - I can get 28.8. There is
no
: Cable Modem support (Not available), not DSL (maybe by Q1
2999),
: and ISDN is foolishly priced ($1800.00 to start and $300.00 per
: month.) I have a smalll 100/T Base network with Win95, WinNT
: 4.0 (Server and Client) and Red Hat 6.0 Linux. I'd really like
: to get Oracle 8i 8.1.5 Server for the Linux box and access it
: via my NT Client. But, as I mentioned above, downloading is
: very impracticle. It would take +100 hours and we have
: power/phone outages almost every day. Where can I get this
: stuff on a CD?
: Thanks
: Jeff Schwartz
null

Where can I get an apple iMac G4 from for around £150? England

Where can I get an apple iMac G4 from for around £150? England

You could also try here:
http://www.macbooty.com/imac.php

Where can I get a list of available selection for certain dict type?

Where can I get a list of available selection for certain dict type in code? For instance, when I use SE16 to view VBFA table, I am presented with many filter criteria. One of them would be "VBTYP_N". When I click on the square next to the option, I am presented with a list of possible values to select from. Where can I get the list of this possible values for any given dict type in code?

Hi Frank,
The list of possible selection you see can be from diferent sources
1) Search helps defined either programatically or search helps defined at table level.
If it is a Z Selection screen check the program, then the data declaration of the parameter
2)Check tables provided at field level. They can be through use of foreign keys. The proposal generated could be simple compund ..
3) Fixed values at Domain level ()
Please refer to this link as well for detailed explanation
[http://help.sap.com/saphelp_470/helpdata/en/9f/dbaa5435c111d1829f0000e829fbfe/content.htm]

Where can I get a trial version of LabView for Unix

I'm using a Solaris v2.61 at work and I'm trying to gain remote accsesss to a TDS 3032 Tektronix o-scope. Where can I get a trial version of LabView for Unix?

At least for LV 7.
You may get NI to give you a LV 6 version for Solaris or Linux. Send an e-mail to sales and see what they say.
http://sine.ni.com/apps/we/nicc.call_me?p_action=country&p_lang_id=US
2006 Ultimate LabVIEW G-eek.

Can't get CF11 to download free trial for students. Anyone having the same problem with Adobe's site?

Can't get CF11 to download free trial for students. Anyone having the same problem with Adobe's site?

Hi,
Please download it from http://www.adobe.com/cfusion/tdrc/index.cfm?product=coldfusion&promoid=DJDUK use your Adobe ID and password to login and download CF11.
Let me know in case you face any issue while downloading it, if you get any error try another browser.
Thanks,
Priyank

Where can I get a copy of elements 8 for mac

Suddenly, when I try to open Elements 8 for Mac I get the message, "Licensing for this product has stopped working." I tried repairing it using Support's nine suggested solution. None worked.
I no longer have my original DMG file I downloaded (don't ask me why). I do have the serial number in my Adobe account so I can install and run another copy. But, I need a copy. Where can I get one without paying a second time for it?
I'm happy with PSE 8 and feel no pressing need to upgrade. I just want back what I had before this sudden development.
Thanks.
Terry

I really appreciate the link. Unfortunately, it says a copy is no longer available for Mac OSX. Do you know if I can still get one somewhere else from Adobe? It's their product that failed me. I'm going to switch to Acorn, a nice low-priced full featured PSE alternative. I already use Lightroom for my photography but need graphic design capabilities for my website, business cards, etc.
Thanks.
Terry

Where can I get a back to factory disc for a hp g6000 laptop

Where can I get a back to factory recovery disc for a hp g6000 laptop

Hi:
If you live in the USA, click on the link below and enter the product number for your G6000 in the applicable box.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?lc=en&dlc=en&cc=us
Then click on the driver tab and select the driver version for the operating system that came installed on your PC--for example Vista 64 bit.
Then scroll down the page and there should be a link labeled Order Recovery Media.
The product number can be found on the same sticker as the serial number.

Microsoft - Worst Customer Support ever! Where can I get a decent Microsoft customer support for Windows in the UK?

I have just tried to created the ISO of the operating system I am using for last 5 years, Windows 7 Ultimate. I remembered that on Microsoft website are quick links dedicated exactly for that purpose. However, when page loaded I've seen this:
The Page or File You Requested Could Not Be Provided
The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.
HTTP Error 404 - File or directory not found.
If you purchased your Microsoft Windows software from another source, but have the software key provided by Microsoft, you can download the Windows operating
system from the following website:
Windows Downloads
When I have clicked on the download link it took me to the webpage which seemed everything going for it. 3-step guide, including the product code and language. Brilliant! I thought, until after filling all the details I have clicked on 'Next-Verify
Product Key' than I faced a message:
Validating your product key. This may take several minutes. Do not refresh the page or select back, doing so will cancel
the request.
When finished, a message pop up: that the language provided is not compatible with the product key - try different language. Interesting, I am using this product last five years but is not compatible with English? I must have been a fairy then
to be able to make it work for all these years. Then it got better.
I have tried it again with a different message in the end:
System Error
We encountered a problem with the product key you provided. Please visit the Microsoft Support Contact Us page
for assistance. Refer to Message Code 715-123130.
So I have contacted Microsoft. Contacting Microsoft is an experience itself and half.
Being Microsoft certified, I used the link provided for IT Pros. I click the link provided and the page started loading..... and still loading now....
So I have decided to call the customer support as you would normally do with any other organisation. To actually get to the phone number, illogically placed, took me a few loops around MS website. Once called, I got to speak to very efficient lady on reception
who kindly switched me to the Technical Support. That's going well, I thought.
Once the connection has been made, I felt that MS technical support is based in submarine 3 miles under water in Japanese sea. All I could hear was the very familiar sound of water of modern Voice over IP connection dated back in 2003 and a male voice (but
by the sound of it it might have been a whale) asking me my name. Unsurprisingly, the connection was interrupted several times when I tried to describe my issue I am having, and eventually I was disconnected.
Still not put off, I made another attempt to contact MS customer service. This time I have been talking to a woman, seemed a little bit closer, maybe Bristol waters? Still in the submarine but not so deep. Also here I was asked my name AND surname; then
I have described my intentions and the difficulty I am having in succeeding it. The woman on the phone didn't get at all what I was saying. I had to literally spat out word by word what the problem is. (Luckily, I have many years of experience supporting IT
users over 60 years of age so it didn't take so long to explain it to her.) My thought just was, oh my God, how can she help if she didn't even understand the issue. Then the phone went completely dead for 10 mins. When it came back to life, I could hear clear
sound of fishing boat passing by until a voice, I assume the same woman, apologised for the delay. And now - the best is coming:
1) I was informed that the website is being tested, under construction and that doesn't work properly.
Comment: How can Microsoft, one of
leading organisation in technology, do testing of website 'live'? Quite clearly, that is BS.
2) I was advised to obtain the ISO image from 3rd Party website!!!! On question if she can give me the link to any 3rd party website the answer was NO.
Comment: Seriously, so here we are in 21st Century, dealing with almost the GOD in IT and the recommended solution is - to obtain help for the God's product from UNKNOWN 3rd Party. Brilliant! If this is the case, where Microsoft is exactly heading to???
3) She cannot tell me when the issue of non-working website will be sorted and I should go and buy the copy of Windows; than I will be able to do the ISO.
Comment: Well, that's what I call a professional advise from Microsoft representative. The fact that I do have the physical copy was totally ignored, the fact that I have been running the system for several years have been totally ignored the whole point
of this exercise (to cut down the time making ISO using Microsoft website) was totally ignored.
When I started asking questions to clarify what has been said I have been continuously interrupted.
To my question whether MS customer service representative have been trained to interrupt customers I have been told that I am talking over her. I asked her name, which she told me but I didn't catch and therefore I have asked if she could spell it. On that
point she hung up.
Well done Microsoft! And now I want to know just one reason why I should buy your products when the support, in case of problems, is not existent.
Does anyone know where I can get a decent customer service that can resolve my issue better than smudge it ?
Thank you.
Lenka Novakova
Microsoft Certified IT Professional Enterprise Administrator
Microsoft Certified Solutions Associate

Just having the same issue there, which is real not fun, I have not tried to contact them, but looking at your experience I am not sure if I should.
My key comes from the back of a laptop o so I guess that would be a W7
OEM, and that could explain why you can't download a ISO from their website, would that also your case ?
Also could it be because we are attempting to get the ISO after the product became EOL ?
http://windows.microsoft.com/en-us/windows/lifecycle
Maybe I will give a go with the customer care people and maybe I will get a right answer ;)
Will keep you posted

Where can I get a 3rd party mouse pad for my HP Pavilion dv6 - left mousepad button broken again!

Broken AGAIN and just out of warranty. I had this replaced at 9 months and now it's broken again (at 15 mths) with light/moderate usage. I've seen lots of posts about this issue both on and off the HP forum. Please can you tell me where I can get a replacement mousepad that I can install myself.
Thanks.

eBay:
http://www.ebay.com/itm/619249-001-NEW-GENUINE-HP-TOP-COVER-FP-CHAMPAGNE-DV6-3000-SERIES-/2906341038...
The touchpad is part of the whole top cover so it is going to require a significant disassembly. The above is likely not your correct part either, but the top cover for all dv6's ought to be available on ebay for $50-80. Here is the Service Manual:
Manual
This will provide disassembly instructions and also help you locate your exact part number. Part #3 page 24. The big thing is whether you have the fingerprint reader and the color.

Where can I get an update to 4.2 for i-touch?

Can I get iOS5 for my I touch bought 2 years ago

Sorry, no. That model is a 2nd generation, with the highest possible iOS being 4.2.1
Stedman

Where can i buy an thunderbolt to video adapter for my macbook pro i7?, where can i buy an thunderbolt to video adapter for my macbook pro i7?

I recently upgraded my macbook pro 1,1 to a macbook pro i7 i had a dvi-i to video adapter to connect it to the tv.
the new macbook i7 uses thunderbolt to connect, i bought a dvi-d to thunderbolt connection to bridge with the old adapter but this now doesnt work.
is there a thunderbolt to video adapter? or can anyone suggest a proper way to connect the two?

The only Thunderbolt display I'm aware of is Apple's. However, the Thunderbolt port on your MBP is also a mini-displayport and that is the normal way of connecting an external display to your MBP. You therefore need a mini-displayport to whatever you need on the TV end, e.g. HDMI. Apple have a good selection of cables on their online store.

Where can I get an older version of iPhoto for an older reconditioned Macbook?

I have reconditioned Macbook 13" that is 5-6 yrs old-no iPhoto on it. How do I get a copy that works with Snow Leopard? It never came with iPhoto and I have no disks anyway. It came with Leopard which I then updated by purchase. The version I have is 10.6.8. I assume that's as far as it goes since my Software Updater would have prompted me otherwise. My memory is also updated to 4GB.
It can't be updated to Mountain Lion which I have no problem with. I just want to get iPhoto on it because my iPhone has no memory left and I want to move some photos to my Mac system now. (and eventually I want to backup my photos as well that's another whole question). So I need the use of my computer system for all of this and my Macbook only has Preview to view pictures in. I can't install the current iPhoto and can't seem to locate where I can buy an older version that is compatible with my older system.
Thanks.

The App Store version of iLife ‘11 programs will only work with 10.7 or 10.8. You can get the iLife ’11 DVD which will run on 10.6 on eBay fairly cheap.
http://www.ebay.com/sch/i.html?_odkw=apple+ilife+11&LH_Auction=1&LH_BIN=1&_sop=1 2&_osacat=0&_from=R40&_trkparms=72%253A1234%257C66%253A2%257C65%253A12%257C39%25 3A1&LH_PrefLoc=1&_sc=1&_trksid=p2045573.m570.l2632.R2&_nkw=apple+ilife+11&_sacat =18793

Where can I get a new i/o-shield for my P965 Neo-F V2 motherboard?

I need an i/o-shield for MSI P965 Neo-F V2 motherboard.
I live in Finland, I've asked from local stores but nobody sells them separately.
Anybody knows where to acquire one? (it can be from another motherboard too, if it's exactly like the one that comes with Neo-F V2).
Any help would be greatly appreciated, thank you.

I found this place---> http://www.censuspc.com/Back-Panel-I-O-Shields-c-39.html which ships internationally(no international Credit Cards though--does accept PayPal). Take a look at the shields they have to see if any have the right cutouts. I remember Intel selling a ton of different I/O shields and maybe one of those will work, but I haven't found the link yet. Try contacting the MSI office in your area and see they can help.
Edit: I found it! Here's a link with illustrations of various Intel I/O shields: http://www.intel.com/support/motherboards/desktop/sb/cs-009031.htm
Here's the link with the I/O shields for purchase: http://shop.intel.com/shop/category.asp?category%5Fid=94
Here's the link for different delivery locations: http://shop.intel.com/shop/countryselector.asp

Where can I get an old version of Pages for Lion?

Does anyone know how I can get Pages for Lion, os x 10.7.5. Upgrade is not possible

Seems like I have seen an answer but this one is being left alone and no one??

Where can i get a 45 Degree angle adapter for the laptop end of the G6 power supply.

Similar Messages

Maybe you are looking for