Where can I get a list of published iPhone APIs?

Hi,
Please can some one let me know where I can get a complete list of the iPhone APIs. 
Many thanks

Hi Frank,
The list of possible selection you see can be from diferent sources
1) Search helps defined either programatically or search helps defined at table level.
If it is a Z Selection screen check the program, then the data declaration of the parameter
2)Check tables provided at field level. They can be through use of foreign keys. The proposal generated could be simple compund ..
3) Fixed values at Domain level ()
Please refer to this link as well for detailed explanation
[http://help.sap.com/saphelp_470/helpdata/en/9f/dbaa5435c111d1829f0000e829fbfe/content.htm]

Similar Messages

  • Where can I get a list of Adobe Connect API error messages?

    We have a test that will try to connect to an invalid Adobe Connect site and confirms that we get an appropriate error message back.  Last week, the error was "The remote name could not be resolved: test.com".   Now the error is "Unable to connect to the remote server".  Is there a list of Adobe Connect API errors and where would I check to see if they are changed/updated?
    Thanks,
    Kevin

    Assuming that you did a default installation, you can click Start-->Programs-->National Instruments-->FieldPoint 3.0-->FieldPoint Help. There is a category called Errors and Warning Codes. Under that category is two subcategories; FieldPoint Specific Error Codes and General Error codes. These two sub-categories should list most error codes that you will see.
    Regards,
    Aaron

  • Where can I get a list of available selection for certain dict type?

    Where can I get a list of available selection for certain dict type in code?  For instance, when I use SE16 to view VBFA table, I am presented with many filter criteria.  One of them would be "VBTYP_N".  When I click on the square next to the option, I am presented with a list of possible values to select from.  Where can I get the list of this possible values for any given dict type in code?

    Hi Frank,
    The list of possible selection you see can be from diferent sources
    1) Search helps defined either programatically or search helps defined at table level.
    If it is a Z Selection screen check the program, then the data declaration of the parameter
    2)Check tables provided at field level. They can be through use of foreign keys. The proposal generated could be simple compund ..
    3) Fixed values at Domain level ()
    Please refer to this link as well for detailed explanation
    [http://help.sap.com/saphelp_470/helpdata/en/9f/dbaa5435c111d1829f0000e829fbfe/content.htm]

  • Where can I get a list of Jdeveloper's hotkey?

    Hi:
    I have a bit of question
    Where can I get a list of Jdeveloper's hotkey
    Just like Eclipse
    Thanks
    Message was edited by:
    user637784

    There is a list of keyboard short-cuts in the online help under the accessibility section:
    http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3/state/content/navId.4/navSetId._/vtAnchor.keyboardaccess/vtTopicFile.using_help%7Cada_rfeaturessupported%7Ehtml/
    The default one is here:
    http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3?topic=ide_rkeymapdefault_html
    And if you are coming from an Eclipse background you might also want to read this:
    http://blogs.oracle.com/shay/2007/05/30
    http://blogs.oracle.com/shay/2006/09/12

  • Where can we get the list of predefined services for the notification of events/signals

    We have a sample plugin docwatch which uses the responder to notify in case a new doc is created/saved/doc closed etc.
    I want to know if I can get the similar set of services for the text frame
    eg: Typing a text should generate the notification
            Deleting a text shoud generate a notification( in the form of alert window or something)
    Also, for pages,frames etc.
    Where can we check the list of default services available for these or can we do it some how in code?

    Hi Eton,
    To check the instances which have ran today, you can use the below query in query builder.
    SELECT SI_NAME,SI_ID FROM CI_INFOOBJECTS WHERE SI_INSTANCE=1 AND  SI_STARTTIME > '2014.08.20 00:00:00' Order by SI_STARTTIME DESC
    To check the instances which would be running in the future, that means you have recurring schedules. Check for the SI_NEXTRUNTIME to get the details of instances which will run in the future as per the recurrences.
    Thanks,
    Prithvi

  • HT5554 where can i get a simcard for the iphone 3

    i have a iphone  but i dont have the sim card where can i get it

    Call any carriers or go to any mobile shops to get SIM. Do a search first for the best carrier plan tailored to your needs.

  • Anybody know where can I find a list of published web service in Java?

    I tried xmethods.net, seems all the document style web services are developed using .net. I have problem to invoke the services using Java developed web service client.
    I wonder if anyone know where I can find a list of published Java web services.
    Thanks in advance.

    Here's a big list (includes both MS & Java)
    http://www.servicesweb.org/rubrique.en.php3?id_rubrique=11

  • Where can I get a list of SAP released "remote enabled" fuction modules?

    Dear All,
    We are developing some java program remotly do automatically configration check, secuirty check, reporting ... for SAP NW 7.0 based system without creating any program/functions inside ABAP.
    I know that, not all the checks can be done by java code (some has to be done manually) but do you have any suggestion to help me get a list of SAP released "remote enabled" fuction modules together with some explainations?
    Thanks,
    Derek

    Hi Derek.
    I would like to suggest a few,
    Go to Transaction BAPI.
    There you will find BAPIs related to all Modules.
    All BAPIs are RFC enabled
    Hope that's usefull.
    Good Luck & Regards.
    Harsh Dave

  • Where can I get a really low-priced iPhone 3G case?

    Where can I buy a high quality, good, preferably new, iPhone 3G case that is very low in price? I'm talking below $5.
    Thanks. Remember, I want a *high quality* case that will last a while and will actually *protect my phone*.
    And try to give me something that YOU would buy if you didn't have a lot of money to spend on a case

    Hi Zahid K,
    I don't know of an iPhone case that costs less than $5, but you can find list of iPhone cases with ratings and reviews on the Apple online store.
    http://store.apple.com/us/browse/home/shopiphone/iphoneaccessories/cases?mco=MTY1NDIwMg&s=priceLH
    -Jason

  • I saved a play list on my iPad .. How can I get that list to my iPhone?

    How can you get a saved Play List from the iPad to the iPhone?  It did not show up even after I synched both devices.

    If you are using iTunes Match the playlist will be automatically be pushed to he cloud then other iOS devices. However if you are not using iTM then playlists do not sync between devices and you will need to create the playlist in iTunes to sync it to your iPod.

  • Where can I get a list of all Oracle products available in the Cloud?

    All Oracle Products available in the Cloud can be viewed here
    Applications can be accessed under dedicated "Knowledge Zones" where you can have insightful information about the product, how to develop, implement, market and sell the solutions. Also, under "Join the discussion" tab, you can engage with Oracle and follow the discussion on dedicated social media channels.

    LOL what a useless doc.  Maybe https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=612452503286937&id=1337394.1&_afrWindowMode=0&_adf.ctrl-…
    is a bit better, but good luck trying to be Itanium specific.
    Edit:  Well, so much for trying to paste in an MOS doc link.  It's called 10.2.0.5 Patch Set Updates - List of Fixes in each PSU [ID 1337394.1]

  • Where can I get a listing of core files?

    I'm not looking for re-install Tiger, but I do know that over the past year and a half of using Tiger I've downloaded/installed countless applications/modifications/etc.
    What I'd like to do is remove a lot of that crap, but I there are quite a few files I'm not sure I can delete or not.
    Is there a listing of files somewhere?

    If you wish to uninstall an application, check it to see if there's an uninstaller. See the read me file that came with the installer. If so, run that. Most, but not all 3rd-party apps, are installed by dragging them to your Applications folder and you can delete them by dragging them to the trash and emptying it. Most, also, have one or more preference files stored in ~/Library/Preferences/. To find out where an application stored every file, for those that made one, you could open its package in /Library/Receipts/, Launch the Terminal.app,, type this in, followed by a space, and then drag the Archive.bom into the terminal window, and hit the return key:
    lsbom
    For example, if you wanted to know where the QuickTime 7.1.2 update put files, the command would look like this:
    lsbom /Library/Receipts/QuickTime712.pkg/Contents/Archive.bom
    Good luck with your project.
    G4 450 MP Gigabit   Mac OS X (10.4.7)  

  • Where can I get a list of products for design and web packager?

    Hi I need to create a package and the packager lists all the available software. What are included in the design and web?
    Adobe CC 2014 Design & Web Premium:
    – Adobe Photoshop CC
    – Adobe Illustrator CC
    – Adobe InDesign CC
    – Adobe Dreamweaver CC
    – Adobe Flash Professional CC
    – Adobe Fireworks
    – Adobe Acrobat Pro
    – Adobe Muse CC
    – Adobe Edge Animate CC
    Which of the following can be included:
    Scout
    InCopy
    Gaming SDK 1.3
    Extension Manager CC
    Extended Toolkit
    Exchange Panel
    Edge Reflow
    Edge Code
    Bridge
    Cheers.

    Hello InquiringMind,
    Ray is absolutely right (thanks Ray!). Something that I would encourage you to do since it sounds like you are starting to dive into TestStand is take one of our customer education classes. We have TestStand I and TestStand II available at many different locations throughout the US and World. To sign up please visit ni.com/training or call 866-ASK-MYNI and we can help you out.
    With warm regards,
    David D.

  • Where can I get a list of Labview fieldpoint error codes?

    I'm programming my application and want to act on some error codes such as failure to communicate but ignore others like some values out of range.

    Assuming that you did a default installation, you can click Start-->Programs-->National Instruments-->FieldPoint 3.0-->FieldPoint Help. There is a category called Errors and Warning Codes. Under that category is two subcategories; FieldPoint Specific Error Codes and General Error codes. These two sub-categories should list most error codes that you will see.
    Regards,
    Aaron

  • Where can I get a list of Packages for E-Business Suite 11i?

    Hello,
    I am trying to find a list of Packages for EBS 11i especially in the areas of customer management, order management, product catalog etc. If you know packages in this area, please respond to this post.
    Rahul

    Hello InquiringMind,
    Ray is absolutely right (thanks Ray!). Something that I would encourage you to do since it sounds like you are starting to dive into TestStand is take one of our customer education classes. We have TestStand I and TestStand II available at many different locations throughout the US and World. To sign up please visit ni.com/training or call 866-ASK-MYNI and we can help you out.
    With warm regards,
    David D.

Maybe you are looking for