Where can I get a Mac CS2 or 3 that works on an Intel computer?

Where can I get a Mac CS2 or 3 that works on an Intel computer? My CS2 on a G4 doesn't work.
Björn

@Eugene – CS2 should install on Macs with OSX up to version 10.6.8. An older OS component is required: "Rosetta". With OS X 10.7 and above the install is not possible, because "Rosetta" is no longer supported in 10.7 and above.
Uwe

Similar Messages

  • I can't get some song on my iphone they work off of the computer but they wont show up on my phone they are in the "on my iphone" section but they gray and have a gray dotted circle next to them i have tried every thing I just want them on my phone HELP!

    I can't get some song on my iphone they work off of the computer but they wont show up on my phone they are in the "on my iphone" section but they gray and have a gray dotted circle next to them i have tried every thing I just want them on my phone HELP!!!

    You have posted to the iTunes Match forum, which your question does not seem to be related to. Is your question concerning iTunes Match or syncing with iTunes via USB?

  • What are the coupons for?? and where can I get cheaper .Mac membership

    What are those coupons that came with the mechine for??
    Not for .Mac??
    where can I get cheaper ones.(I live in Canada)
    Thanks

    They are used for the rare promotion or upgrade offers.
    The only time I've ever seen a use for them is when you purchase a computer with a previous version of the Mac OS when a newer version is already available.
    You can submit one of the coupons with the upgrade form to obtain the new version at a reduced price.
    That's about the only benefit I've ever seen for them.
    Apple calls this program something like "Mac OS Up To Date" (something along those lines).
    To illustrate, say you purchased an iMac right after OS 10.4 came out, and discovered that the iMac was packaged-up prior to OS 10.4 being available (like it sat on a shelf for a while). So, you've got OS 10.3 installed on it.
    Now, you purchased a new computer, obviously you want the latest OS to go with it.
    So, because you purchased a new machine with an old OS, you can use the OS Up To Date program to order upgrade disks to OS 10.4 for only $20 or $30 instead of the $129 everyone else pays.
    It's not really a fair deal for a person who just purchased a new computer. But, it's better than getting stuck with paying $129.
    So, you would fill out the upgrade form, and submit your coupon with it.
    The same thing applies to if you purchased the system after the new version of iLife was available. You might be able to get the new version of iLife at a reduced price.
    Apple usually runs this program for about 90 days after a new software version is available.
    They used to work it the other way:
    When I purchased my PowerMac G3 266-DT, they had a program that allowed you to upgrade to the new version of the Mac OS for $19 or $29 (can't remember for sure the $ amount) if it was released within 90 days of you purchasing your computer.
    I took advantage of that, and got a reduced-price upgrade to OS 8.5 from OS 8.1.
    That method makes more sense to me than the current method.
    It makes sense to get a reduced price on updates that arrive up to 90-days from your date of purchase.
    But, it is not such a good deal to have to pay for updates that were already available at the time of purchase and should have been included with your new computer. After-all, it's not your fault that the computer sat on the shelf too long.
    But, that's how it works now. The coupons basically get you a discount on software updates that were shipping on new systems when you purchased your new computer that had been boxed-up before the new software was released.
    As for cheaper .Mac prices, the only options I know of are:
    1) You get a $30 discount on it when you purchase a new Mac. So, when you setup the Mac, you are usually presented with an option to sign-up for .Mac with a discount.
    2) Amazon sometimes runs a special on it.
    3) You might be able to get a .Mac retail box from someone who purchased it and then changed their mind. But, don't buy a box that has been registered already.
    Be very careful buying products like .Mac second-hand. There is no way to know that they have not already used the registration code until after you receive it and try to register it yourself.
    Hope this helps to answer your question.

  • Where can I get a Mac OS X 10.7 compatible driver for my HP Photosmart printer?

    I just bought a Mac Air B. with Lion 10.7.2 and I have a HP Photosmart 3310 all-in-ine printer. I can't get driver from HP.
    Anyone knows the solution?
    Thanks

    http://support.apple.com/kb/HT3669 indicates it's supported. Have you tried downloading the drivers from Apple?
    http://support.apple.com/kb/DL907
    Hope this helps.

  • Where can I find a list of USB adapters that work in OS X.4?

    My friend is trying to get his Mac up and running on a wireless network and he has bought a few USB adapters, but they aren't compatible with OSX.
    I tried the Ralink drivers, but it stays connected for around a minute, then drops the connection.
    So, if anyone has a list of compatible USB adapters for OSX, I'd appreciate it.

    Here is the only product update page that I'm aware of at the Adobe.com website:
    Product updates

  • Where can i get my mac book pro cracked screen fixed

    my mac book pro screen cracked and i was wondering if i can send it in to apple or is there any place i can get it fixed

    http://www.apple.com/retail/geniusbar/

  • Where can I get my mac refurbished?

    I would like to get my Macbook pro refurbished. Do apple to this?

    Apple does not do that.
    Just why do you need the MacBook refurbished?
    Are you having problems? If so if you list them then likely we can help.
    What model MacBook Pro?
    This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

  • Where can I get my mac book repaired in gurgaon

    Mac book started giving trouble all of a sudden....booting took extremely long. After reacher the home screen any application u selected took forever to upload. Of late the mac book has run out of charge and does not

    im not sure, but you can start here http://www.apple.com/in/contact/
    it has contact links for apple support india and a store finder
    hope this helps
    -mvimp

  • How can I get again Mac O S X 10.5.8 in my computer

    My computer is not reading Mac O S X 10.5.8,.: by mistake stopped a update and nowis not working ,only shows the apple and the circle rolling and after that a blue screen.

    Shut down computer.
    Restart holding down Shift Key.
    Keep holding Shift key until you see a progress bar. This will run a cleanup on your drive.
    Does this allow you to get to the login screen?
    If no....
    Do you have your install CD?
    How to Install Leopard Troublefree
    https://discussions.apple.com/docs/DOC-2275
    BTW, I saw today where Best Buy is having a Father's Day sale on MacBook Airs. The discount kicks off today, but appears to extend all week. Check out the deals.
    http://www.macrumors.com/2014/06/15/newest-macbook-airs-on-sale-for-fathers-day/

  • Where can I get the patch for Oracle JMS to work with RDBMS 9.2.0.1

    Hi,
    In the following extract from Oracle documentation the patch is mentioned that needs to be applied.
    "You must apply a server-side patch for Oracle JMS, which ships with Oracle9iAS Release 2 (9.0.3) and the OTN release of OC4J, to work with an RDBMS 9.2.0.1 database. This patch is documented as bug 2513629; see the Metalink Web site or contact Oracle support for more information. However, it is strongly recommended that users move to RDBMS 9.2.0.2 when it is available. Users do not need to apply any server-side database patches when running with RDBMS 9.2.0.2."
    Where I can get this patch?
    Is it RDBMS patch or OC4J patch?
    I don't have access to a Metalink.
    Thanks a lot,
    Andrei

    Check out the configuration on the mapping. There you can create a data file. Do that and fill out the other parameters for the bad and discard file in that node.
    Jean-Pierre

  • Where can i get a iphone 5s user manual that is specific to the ATT iphone 5s?

    I'm looking for a user manual that is specific to the ATT iphone5s. All I can find is the generic manual from the apple site. There must be one that specifically addresses all the features, icons and apps on the ATT version.  I also own a Samsung Galaxy 4S and I was able to download the ATT manual for this phone, so there must be one for the ATT iphone 5s somewhere?  Can anyone help?  Plaese don't say go to ATT, they were no help at all.

    The iPhone 5s manual is here:
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    There is no carrier specific version as there is no real difference between carrier specific phones. The hardware and OS are exactly the same. There are no additional AT&T apps or features for iPhones that would be pre-installed. iPhones are identical across the board. 
    Any Additonal AT&T apps can be downloaded from the App Store and would have their own Help or guide to use them.

  • Where can I get an adapter (like a splitter) that will allow two people to listen to my iPod on two sets of headphones?

    Not looking forward to a long haul flight with no soundtrack!

    Not even a hint as to which country you live in? I'll guess from the posting time you're here in the UK. Try Amazon, Dixons, eBay, Maplins, PC World, Staples, Tesco, etc. In fact, let me Google that for you...
    tt2

  • Can't Get Win Zip Or Win Rar To Work On New Intel imac.......

    Hi guys,
    As the title suggests really.
    Not sure if I am doing something wrong during the installation process or whether both software programs just arn't compatible with the new mac's yet.
    I am downloading the program then I just cant find a setup file to initiate the install. When I have installed stuff on the mac normally installation is automatic (i.e asks if you wan't to install).
    Any advice would be great or if there is a more suitable zip program for the mac then I would loke to know.
    Many Thanks
    Nathan

    Hi guys,
    In response to the question I realise that windows software and files are not compatible with mac.
    The software I was trying to install clearly stated mac os x 10.4 compatible but just didn't install, so perhaps it either wasn't actually os x 10 compatible or just maybe not intel.
    Either way I now know that Win Rar and Win Zip are not actually OS X compatible apps, so in light of this which is the best one to install as there are a couple of suggestions here.
    Many thanks for your quick responses, help and patience with me.
    All the best, Nathan.

  • Where can I get new charger for Satellite Pro L500-1D4?

    Hi, I would like to get a new charger for Toshiba. My first charger got lost and the second charger that I bought from ebay 3 months ago for 10,- has stopped working. Where can I get a charger from? I googled and I found couple of wesbites e.g.
    http://www.electronicavenue.co.uk/toshiba-satellite-pro-l500-1d4-laptop-charger-6380-p.asp
    Chargers cost around 25-30 GBP. I don't want anymore problems with a charger. I am already behind schedule...
    Where can I get a good charger from or that is genuine. Any other suggestions are welcome
    Thank you in advance

    Laptop: Satellite Pro L500-1D4
    Sorry I have been away to provide feedback to both your suggestions so here goes:
    @Macius The part number is not PA3716E-1AC3 as you have stated, it is PA3714E-1AC3. Find underneath the link to correct part number and I would appreciate it if you you or anybody else could confirm this.
    http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&tab=1&Model= 1076043&Serie=1076038&Family=2327&x=76&y=16&Type=2 319&ACTION=SHOW_ATTRIBUTES&BV_UseBVCookie=yes&PROD UCT_ID=1076043
    The specs are as following:
    1. output current: 3.42 A
    2. output voltage: 19 V
    3. output voltage: 65 W
    4. input voltage: 100~240V 50/60Hz (Universal)
    5. dimension (WxHxD) in mm: 108 x 46 x 29.5
    6. AC Cable type: three-prong type (Minimum 1.7m long, black-colored)
    @Paolo30 I can get 10 -20 GBP charhger with a full year warranty.
    The two variant chargers that are coming up are, which one shall I select?:
    >A
    ># 3-pin UK Power Cord
    ># 1 Year Warranty
    ># Input: AC 100V-240V
    ># Output: DC 19v/3.42A 65W
    ># Connector: 5.5*2.5mm
    >B
    >Input : AC, 100-240V, 50-60HZ
    >Output :DC, 19V, 4.74A, 90W
    >Connecter size : interior diameter: 2.
    >external diameter: 5.5 mm
    >.Outlet: 3-prong
    Thank you for your time.

  • Where can I get detailed info on bug fixes?

    Hi,
    Where can I get more information on bug fixes that are listed in the release notes of each version? For instance, I am interested in each of the following ones.
    GRANITE-1215 - Workflow Monitoring via JMX
    CRX-4167 - Improved handling for backup procedure on ""listDir = /""
    GRANITE-877 - Fixed ""Too many open files"" issue in monitoring
    GRANITE-741 - Replication can handle missing content in the activation queue
    GRANITE-1090 - Configure exclusion of publish instances for activation status updates
    CRX-2943 - Cluster: Enable audit log on workspaces
    Apart from the one line descriptions, I need more detailed info like what was the issue or why it occurs and how was it fixed, looking for something similar to a KB article.
    Thanks

    These are internal reference numbers and the detailed descriptions are not available publicly.
    Please note that they are not all bug fixes, they can also be: improvements; enhancement requests; and new features.

Maybe you are looking for

  • Creation of Process code for output type

    Hi, Could someone help me out in defining processcodes for output types. Thanks in advance, Yaseen

  • Clear Open Items

    Experts, I am planning to clear some vendor open items through LSMW - Before doing that, i wanted to do a normal manual g/l entry - I created a new document type for this kind of transaction, but that how would the g/l entry i enter close the open it

  • Insert data into linked table

    Problem when you try to insert data into linked table. I made the view with all linked table columns (field1 is PK, field2, field3......) plus new primary key field "field1_PK" for tabular form wizard primary key field definition. After submit data o

  • User Roles & Authorization to run 'WebDynpro ABAP Application scenarios'

    Hi All, I am developer and my user ID is having developer roles, so when i am testing 'WebDynpro ABAP Application scenarios' it is working fine. Problem is when I am executing with enduser portal WWID's (i.e. WWID's are also defined as sap user), 'We

  • Wifi speeds very low

    I feel that BT are leading a misleading campaign on "The best wifi speeds" on TV. I have just moved over from Talktalk where my speeds were great and the wifi was quick. BT wifi speeds come no where near the speeds I was getting before. If I'm cabled