Where can I get a replacement cover for the bottom of my MacBook?

I am looking to replace the plastic cover on the bottom of my MacBook.  The seal has broken and it is beginning to separate from the sides.  Any suggestions?  Can I buy one of these covers from Apple directly?

google is always a good way to check, but before you do that, read this and see if it applies to your model: http://www.apple.com/support/macbook-bottomcase/

Similar Messages

  • Where can I get a replacement battery for the iBook G3 Clamshell M6411, in the UK?

    I recently managed to source an Indigo iBook G3 clamshell - the M6411 FireWire model - from eBay.
    It's in superb condition, but the battery has had it, and only holds about 5-10 minutes' charge.
    Can anyone suggest where I can get a replacement? I guess I just assumed it would be easy, but everywhere I look online they're either sold out or cost a fairly large amount of money - I paid £50 for the laptop, which was a pretty good deal, and had hoped to get a battery for under £30 (as I've bought similar replacement batteries before for other laptops).
    Also, are all the G3 Clamshell batteries the same? Or do the different models have different batteries?

    Some items come up in a search for Mac parts UK; whether or not they have
    an exact part match for any vintage product has not been searched...
    Most that I have looked into, show any battery "out of stock" &/or listed "used."
    A good electronics shop with an understanding of how these batteries are wired
    in their case (and any controller chip circuitry) should be able to install new cells
    inside the case; however opening these may present a problem if done forcefully.
    http://www.thebookyard.com/
    http://www.applemacparts.co.uk/store/index.php
    http://www.theappleshack.co.uk/
    In the US, wegenermedia.com, powerbookmedic.com, & others may know of stock.
    So far, I'd struck out searching; could be one may need to contact long standing
    Apple specialists & those who repair vintage models, to get refurbished batteries.
    Perhaps there is a message board or User Group site where one could try & contact
    Apple users; of those some may know of a source, or an individual capable of repair
    since these battery units have been refurbished before with new rechargeable cells.
    Sorry to not be of exact help in this matter.
    Good luck & happy computing!

  • Where can I get a replacement screen for my iPod touch?

    Where can I get a replacement screen for my iPod touch?

    Uer have been pleased with this place:
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    There are many complients about this place.  You can Google and find many.
    DigiExpress.us - The iPad Repair Professionals

  • Where can i get a replacement woofer for an ipodhifi ipod dock speaker model a1121)

    where can i get a replacement woofer for an ipodhifi model a1121

    Some items come up in a search for Mac parts UK; whether or not they have
    an exact part match for any vintage product has not been searched...
    Most that I have looked into, show any battery "out of stock" &/or listed "used."
    A good electronics shop with an understanding of how these batteries are wired
    in their case (and any controller chip circuitry) should be able to install new cells
    inside the case; however opening these may present a problem if done forcefully.
    http://www.thebookyard.com/
    http://www.applemacparts.co.uk/store/index.php
    http://www.theappleshack.co.uk/
    In the US, wegenermedia.com, powerbookmedic.com, & others may know of stock.
    So far, I'd struck out searching; could be one may need to contact long standing
    Apple specialists & those who repair vintage models, to get refurbished batteries.
    Perhaps there is a message board or User Group site where one could try & contact
    Apple users; of those some may know of a source, or an individual capable of repair
    since these battery units have been refurbished before with new rechargeable cells.
    Sorry to not be of exact help in this matter.
    Good luck & happy computing!

  • Where can I get a replacement "LCD" for my Ipad 1?

    where can I get a replacement "LCD" for my Ipad 1?

    Do you want to replace it yourself?
    Do It Yourself iPad Repair
    http://www.ifixit.com/Device/iPad
     Cheers, Tom

  • Where can I get an EPSON printer for the original iMac?

    Where can I get an EPSON printer for the original iMac?

    You should look for an Epson Stylus Color 740 or the higher-end 900 or 980, which are about 12 years old now.  All have USB connectivity, and while the 900/980 is a better/faster printer, it's harder to find the ink tanks for it at the usual office supply stores.  Ink tanks for the 740 series seem to be more readily available, without a special order.  There were Mac versions of these printers (the 740i and 900i), with blue/ice housings that were color-keyed to match the fruit-colored "blueberry" iMac and Blue & White G3 mini-tower.  There was no Epson printer that was color-keyed to the original Bondi Blue iMacs.

  • Where can I purchase a replacement CD for the Airport Express Base station A1264?

    Where can I purchase a replacement CD for the Airport Express Base station A1264?
    I'd like to sell my Airport Base Station, but I believe I need a CD with the software on it for the new owner. Anyone know where I can find one?
    Thanks!
    Meredith

    I doubt it is available.. and since a new Mac doesn't even have an optical drive.. there is no need whatsoever today for the cd.. it is all available in the OS or download. In fact the stuff on the cd will now be totally out of date.

  • Where can I get a replacement drive for my Macbook 2007?

    My hard disk on my 2007 Macbook died. Where can I get a replacement?
    Any ideas on third party?

    For a new hard drive try Newegg.com  
    Regular SATA drives http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE  Use the list at the left for larger and faster drives.
    SSD drives
    http://www.newegg.com/Internal-SSD/SubCategory/ID-636?Order=PRICE  Use the list at the left for larger and faster drives.
    Or OWC for regular hard drives and SSDs  http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
    Here are video instructions on replacing the hard drive on the Aluminum Unibody
    http://eshop.macsales.com/installvideos/macbook_13_unibody/
    Here are video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/
    To transfer your current hard drive I like the applications Carbon Copy Cloner or SuperDuper. They make a bootable copy of everything on your hard drive. http://www.bombich.com/index.html or http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html 
    You'll need a cheap SATA external hard drive case. Put the new drive in the case then format and partition the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.
    Here's a cheap SATA external hard drive case on Amazon http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=pd_cp_pc_0
    If you don’t have the tools to open up the MacBook OWC has a set for $5
    http://eshop.macsales.com/item/OWC/TOOLKITMHD/

  • Where can I get replacement screws for the bottom of my MacBook Pro?

    I have a late 2011 13 inch MacBook Pro. I recently upgraded it from the stock 500 gigabyte 5400 RPM hard drive to a 750 gigabyte 7200 RPM Seagate Momentus XT Solid State Hybrd drive. When I was putting the screws back in the bottom case  I lost one of the small screws. Now the bottom case of my MacBook is little loose due to the missing screw. Where can I get a replacement screw?

    PowerBook Medic has screw sets:
    http://www.powerbookmedic.com/xcart1/_search.php?is_hc=Y&mode=search&q=screws
    iFixit:
    http://www.ifixit.com/MacBook-Parts/MacBook-Screw-Set/IF186-027
    eBay:
    http://www.ebay.com/sch/i.html?_trksid=p3984.m570.l1313&_nkw=macbook+screw+set

  • Where can I get a replacement battery for my 13 inch MacBook for a reasonable price?

    I have been searching for a replacement battery for my 13 inch MacBook.  Does any one have any good recommendations on where to get one for a reasonable price?

    You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
    Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    Or for $129 from The Apple Store  http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY

  • Where can I get a replacement battery for macbook 7,1 13"?

    My battery condition is at "replace now" and the battery life is so poor that my macbook is now essentially a desktop, however I don't know where to find the right type of battery, and obviously I don't want to purchase the wrong type. Does anyone know where I can get one?
    Please help!

    The model 6,1 Late 2009 and the model 7,1 Mid 2010 A1342 use an A1331 battery. You can replace it yourself or have Apple do it for you for $129. If you need it quickly make sure you order it from a U. S. seller. Orders from China can take two or three weeks.
    http://www.ebay.com/sch/i.html?_nkw=macbook++battery+a1331&_sacat=0&_odkw=macboo k++battery+a1342&_sop=12&_osacat=0
    Here's installation instructions. You'll need a Tri Wing Y1 screwdriver in addition to the usual #00 Phillips screwdriver.
    http://www.ifixit.com/Guide/Installing-MacBook-Unibody-Model-A1342-Battery/1667/ 1

  • Where can I get a pin diagram for the BNC-2120 DAQ Boaard?

    I am using a NI BNC-2120 DAQ Board and a couple of the pins seem to have been damaged. I was looking for a pin diagram to so that I can check to see what these pins correspond to and if they could be contributing to some of the unusual readings we are getting.

    I'm assuming that the damaged pins you are referring to are on the back of the connector block where the cable plugs in.
    The BNC-2120 Accessory is able to be used with several different families of data acquisition products, and therefore the meaning of the pins could possibly depend on which particular data acquisition device you are connecting to the BNC-2120.
    You can find many of the generic pinouts for E series 68-pin devices in the DAQ-mx Help:
    http://digital.ni.com/manuals.nsf/websearch/95ADFF85ABA7853986256D8800668AE2?opendocument
    If you are using an M series device, the following lists its corresponding pinout, which is nearly identical:
    http://digital.ni.com/public.nsf/allkb/61ED77983AD7CCA386256F66008215F1
    If you let me know which device you are using and which pins you suspect are damaged, I could give you more information on what effect it might have.

  • Where can i get a replacement part of  the wireless keyboard A1314

    I wonder if I  can  get some replacement part (capss lock keys) of the wireless keyboard at any apple store??

    Call the Apple store and find out.
    Barry

  • Where can I get this Chinese keyboard for the X1 Carbon Touch?

    I'm looking for this keyboard for the X1 Carbon Touch (3443CTO):
    I believe it's sold in Taiwan, because it has the Bopomofo typing system, but I would mainly need it for Cangjie. So far, I think I've narrowed it down to two FRUs: 04X0479 and 04Y0819. Is it possible to install a Windows 7 X1 Carbon keyboard on a Windows 8 X1 Carbon Touch, ie. are they cross-compatible? Unfortunately, I don't know which one to purchase or how to order the keyboard. Any help would be appreciated, thanks!
    Solved!
    Go to Solution.

    Hi breandan,
    I have been quite busy lately with a startup i am running, so i didn't have time to contribute regularly on my ThinkScopes blog.
    I think you can pop off the keys, but you may damage them in the process. I think it would work out easier and cheaper trying to procure the keyboard that you need from some other random sources. If you know Chinese, you can try 51nb.com forum, they have lot of odd parts retailer that can stuffs for you, and they are not that expensive either. Failing that call IBM Parts service and quote the part you need, and get it from them.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Where can i get a replacement screen for my iphone 5

    I dropped my phone and the lcd now has lines running down the whole of the screen and was wondering where I can get a genuine replacement screen?

    From Apple but it will be part of a exchange refurbished iPhone 5 at $229
    or similar in other currencies
    Apple do not sell "spares"
    Apple retail store genius bar

Maybe you are looking for

  • Sharing with Samba

    Hey all ! I've been for the past two days trying to configure my smb.conf so it shares files over network. I've read docs, wikis, how-tos, theads et cetera but I just can't make the whole thing work. I want Movies and Musics to be read only. This wor

  • Creation of web site 'null' failed

    I finally decided to give Azure a try and the first thing I do - creating a simple web site - fails with: "Creation of web site 'null' failed." Details say: "Provisioning failed." I am simply trying to "quick create" a simple website, with no databas

  • Newby How do upload J2ME programs? - HELP

    I know you need a jar and jad file and upload to the Nokia 3100. The handset manager kit via USB cable works on 3100, 7210, 6610 and 6100. I created a Java JAR file: jar cvf Fortune.jar classes/Fortune.class bin classes lib res src tmpclasses tmplib

  • Keynote 6.0 print changes

    Keynote 6.0 substantially changes the printing options from 5.3.  Can we somehow get the "add borders around slides" option back and use the version 5.3 print borders.?  The new borders are huge.

  • Missing LAV Audio Channel - Urgent

    Hi there I am new to Premiere but used it for a corporate video. I imported all the MOV files, and now I can't find the LAV audio stream. I have tried reimporting the footage but I just get the Mic sound and no LAV. Any suggestions of what I have don