Where can i get an ipod nano 5th genertion new, where can i get an ipod nano 5th genertion new
Ok, so i don't really want one of the new ipod nano's and i already have a touch so does anyone know where i can buy a new ipod nano 5th generation from a retail store and not stores like ebay?
dear deggie it is a bit hard to get sorry go to www.soug.com they are selling one for 565 aed so far ..
Similar Messages
-
I have a 2009 A6 with a 5th Gen. iPod pluggedinto the MMI. I mostly listen to audio books, not a lot ofmusic. The books are 4-6 hours long, vs 4-6minutes with a song. Often, but not always, when I start my A6, the MMI starts on the first song on my iPod, thereforeI don't know where I stopped in my 4-6 hour book. How can I get the interface to stay stopped where I left off? I have gone into iTunes and placed my current book as the first "song" on my iPod for ease of finding it, but often the MMI starts it over at the beginning. Thank you if anyone has any experience with this. My dealer in San Rafael, CA says they've never heard of this issue.
I think my iPod, which is an iPod touch 3rd generation , which is a lot different from a nano, which really makes it almost impossible for me to help you, which is why I suggested that you post your question in the iPod nano community. Your first post says that your product is an iPod nano. I think the people who answer those questions would be most likely to help you. If yours isn't a nano then you can pick the right community from here. This community is really to answer questions about this forum, or issues that don't fit anywhere else.
laverne's mom
Message was edited by: laverne's mom -
I have a Ipod Nano 5th edition. 2 years ago I imported and exported my music files to my Windows 7 laptop and also to Itunes. It worked great. Recently I've tried to do the same and now I can't do either. When I plug in my ipod it is discoverable but I cannot view my music at all. I tried to sync new music I burned from CD's to the ipod, I keep getting a message that the music is already on it but it's not. It's updated, settings I believe are set correct and troubleshooting it, it reports no problems. I don't know what else to do. Need Help! Thank you in advance.
Hey 9Cre114,
I would try out restoring your iPod nano, that might resolve the issue. Restoring erases the iPod's disk and restores iPod to its original factory condition. You can read about how to do so here:
Warning: Because restoring erases all the songs and files on iPod, back up any files you've saved on the iPod disk. All of your songs, videos, podcasts, audiobooks, and games can be loaded back to your iPod provided that you have them stored in your iTunes Library. If you use the Nike + iPod Sport Kit, see this document for more information.
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
via: Restoring iPod to factory settings
http://support.apple.com/kb/HT1339
All the best,
David -
Alright, so my ipod touch stopped working, but I can still connect it to itunes, but my friend gave me his old nano. I was wondering how I could get my more updated songs from my ipod touch onto th nano. My laptop crashed whitch had all my new music, and im afraid if I sync my Ipod touch to the desktop with all my old songs, ill lose all my newer ones which I dont want to happen because I want them on my nano. Im sorry for the confusing topic im just so lost.
All you have to do is connect your new iPod to the computer that has the library for your old iPod.
When iTunes comes up, click on your new iPod under Devices.
At the top of the Summary Page click Music.
Click Synch Music.
Do the same thing for Photos, Apps, Movies and so on...
Now just synch the iPod. -
if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in America?
please i need help, im worried that if I connect my ipod here, it will burn or sometihng bad.Just connect it to a computer's USB port.
Most wall chargers are dual voltage (110- 220 volts) and only require a plug adopter. Check the wall charger to see if yours is. -
Good morning a few weeks ago I send the request for the replacement program of my ipod nano 1st generation and they sent me the shipping box but I did not get the label to go back, and I can not return it , i need to you sent me again the box for return the ipod
Best thing would be to call Apple up again, and let them what has happened and they'll help you!
-
I have a ipod 5th gen and i changed my password because everyone knew it. I had forgotten it and now it is fully disabled. I can not get it online anymore and i have tried everything to get it restored. Please help as I am really worried
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
i have several ipod nanos. i can sync one, but since i connected the ipad 2 I am getting an error on two of them, it says cannot sync, error 13019. the loaded songs show on the computer (on the ipods), but not when the ipod is plugged off the usb. Any answers? please
You can sync your iPod with multiple computers, but what can be synced is very limited. See this article for more details.
http://support.apple.com/kb/ht1202
B-rock -
I've got a iPod classic 80g I've got loads of pictures on there and I want to get them off. I've tried something where the files I get off come up as thumbnails which I can't open. Is there any way of getting them off and viewing them as a normal photo?
Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!
-
The on/off button on my 6th gen iPod nano recently got spoilt and I sent it back to the shop for a repair/exchange a week ago. Now I have just found out about the new 7th gen iPod nano and I am wondering, can I get the new one as a replacement?
No. You can turn your 6G Nano in to be recycled at your local Apple Store for a 10% discount towards the purchase of a new one. Otherwise, your only other option would be to sell the iPod on Craigslist or eBay and use the proceeds from the sale towards the purchase of the new 7G nano.
B-rock -
I just updated an iPod touch bit my pictures where lost is there any way I can downgrade and get my pictures back??
If the photos were synced to the iPod they are not in either an iTunes or iCloud backup.Y may be able to get them from the updated iPod
via How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official -
IPod Nano (1GB, 1st Gen.) can't be recognized by iTunes
I have been having problems Sync'ing my iPod nano with iTunes, however, the more I read help articles and follow the steps, the worse the problem gets. (I'm on a PC using Windows XP)
I've gotten to the point where I updated my iPod software in Disk mode (up until then it was being recognized only in Disk mode), but when iTunes failed to recognize it when not in Disk mode I preceded to restore my iPod to factory settings, as instructed in the help articles.
Now, up until then, I still had music in my iPod, and I was being able to charge it and listen to my music even though I couldn't sync the iPod anymore. After restoring, I not only lost my music (which I was aware of), but it STILL did not fix my problem. So I started to get annoyed.
I then noticed that my iPod was being recognized by My Computer, just not by iTunes, so I began to perform the steps indicated in the following article:
http://docs.info.apple.com/article.html?artnum=93716
I restarted my iPod service - no luck
I removed iTunes - no luck
I emptied my Temp directory and restarted...
That's when iTunes stopped recognizing my iPod altogether, not even in Disk mode. Not only that, but it seems to have affected the iPod itself, since it won't turn off or exit Disk mode anymore. So now I'm scared of going though with any more steps on whichever "help" articles and making the problem even worse than it already is (if that's possible).
The only other information I can provide is that windows is still recognizing my iPod, no problem, and when I connect my iPod, iTunes actually launches... but DOESN'T recognize a thing. So I ran a diagnostics using iTunes and here's what I got (iPod diagnostics):
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
INTEL_ D945GCL_
iTunes 7.3.2.6
iPodService 7.3.2.6 is currently running.
iTunesHelper 7.3.2.6 is currently running.
Current user is an administrator.
The current local date and time is 2007-08-30 11:53:26.
Connected Storage Devices:
Unidade de disco, MAXTOR STM3160211AS, Bus Type ATA, Bus Address 0,0
Unidade de disco, MAXTOR STM3160211AS, Bus Type ATA, Bus Address 0,0
Unidade de disco, Apple iPod USB Device, Bus Type USB
Universal Serial Bus Controllers:
Standard Universal PCI to USB Host Controller. Device is working properly.
Standard Universal PCI to USB Host Controller. Device is working properly.
Standard Universal PCI to USB Host Controller. Device is working properly.
Standard Universal PCI to USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
No IEEE 1394 Host Controller found.
Connected Device Information:
IPOD (H:\), iPod nano running firmware version 1.3.1
All green lights, and as you can see, according to iTunes, NO PROBLEM! Except that it won't recognize the iPod that the diagnostics says exists and reads... ?!?!?!
If anyone could shed some light on my situation, i would be VERY greatful!I've experienced the same issues, but apparently went to the next level. My computer does not recognize the ipod at all. As soon as we put a 2GB nano on and updated the software the 1GB started having problems. When we went through the diagnostics and web support it got worse. When we called support and spent 90 minutes on the line it completely stopped working and I felt lucky that the new ipod worked. The 1GB now plays and works fine away from the computer and will recharge in the dock that is not hooked to the PC, but itunes does not recognize it and we cannot update with new music.
I took it to Mac authority who could not diagnose the problem and said they'd never seen or heard of this issue. They could not even make the Mac recognize it as an external drive. After spending $20.00 to just have it diagnosed, they told me it needed a new logic board which would cost between $59 and $89 less the $20 I'd already blown. I am MUCH less than satisfied with the results, and have been told that I could buy another one for $20.00 off and a small discount.
The problem is, the 1GB worked until the moment we added the 2GB, now my son is being penalized because my daughter got a new nano, and I'm expected to shell out more money....If you find a resolution that doesn't cost more than the worth of the ipod, I would love to hear it. -
My wife's nano no longer is recognized by Windows but my ipod touch is? How can I fix this?
My wife's nano no longer is recognized by Windows but my ipod touch is? How can I fix this?
My iPod touch is always recognized by my Vista Box...using the same USB cable and port my wife's nano isn't detected anymore. Since Vista can't see the nano iTunes can't see it either. When I try my wife's nano I get the message:
"One of the USB devices attached to this computer has malfunctioned, and Windows doesn't recognize it. For assistance in solving this problem, click this message"
I thought her nano wasn't charged enough but I've charged it for hours and this doesn't make a difference. It used to synch like my ipod touch but it stopped working about a week ago. My wife's nano still holds songs and works it just can't be recognized by Windows. I even checked if the Apple Mobile Device app was running and it was and I stopped it and restarted it. Didn't make any difference. Any ideas? -
Please help me. I can't open my Ipod touch. I enable voice over settings on my Ipod Touch 5th gen. I can't disable it anymore. I off my ipod and now i can't open it. It doesn't accept my password. I can't open it anymore. Thanks!
Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see:
iPhone: Configuring accessibility features (including VoiceOver and Zoom) -
Given an older ipod , 5th generation and 30GB, can't restore
I was given an older iPod, 5th generation 30GB, I can't reset or restore it using windows 7 based computer even with the most current iTunes download. Is anyon e else having trouble resetting older iPods with windows or is their something wrong with the iPod itself. And if there is a problem with the iPod, does anyone know the approximate cost to get it repaired. I can't get anyone at Apple to tell me anything without it being looked at by a 'Genius' first. I don't want to waste my time driving an hour each way to an Apple store if I would better off just buying a new one. Any help would be greatly appreciated.
Here's more information on error message, it just says 'unknown error' and won't go into disc mode.when following the '5 R's' in technical support.Zac henderson wrote:
...Couldnt restore ipod, error code (9) " ...
Try here > Configure security software -
How can I, or can I export my songs on my iPod back to my computer?
The songs on my iPod Video 5th Gen now, were at one time on my computer, but have since been erased. Why can't I export the songs from my iPod back on to my computer? I have this same problem with my other devices (iPad 3rd Gen and iPod Nano 6th Gen). I am really frustrated now, because it seems as if I have to start all over again. This will be a royal pain in the butt! I don't understand why Apple makes this so hard and impossible to do this. Please help, anybody!!See Recover your iTunes library from your iPod or iOS device.
tt2
Maybe you are looking for
-
FM LDB_PROCESS doesn't work fine
Hi everyone, I need to access the logical database EHS_OH001 from a function, and I using the FM LDB_PROCESS to do this. But when I've compared teh results using this LDB via a report (selection screen and GET event) and this function I noticed that
-
Blank page after installing htmldb 1.6
I have installed htmldb 1.6 with a 9.2.0.5 database on SuSE Enterprise 9, but can't seem to get it working. I get a blank page when going to http://localhost:7785/pls/htmldb. When going to ps://localhost:7788/pls/htmldb/htmldb_login, I get an error i
-
Fund managment exceeding the budgeted and committed items
Dear All, In my client place we implement the fund management. we create the department wise fund center and related committed items. For example for the Fund center Administration Expenses- Committed item is Advertising expenses. When ever i made
-
Photoshop CS5 unexplained freezing
Hi, so I've been using CS5 since it came out, and have had no problems whatsoever. But today I started my computer and when I went to open a file, CS5 totally froze. I thought perhaps it was just that file, but it froze on every file. I did some read
-
How can I find 0YEA_QUA_MON_DAY hierarchy from 0CALDAY in RSA1?
Dear expert, How can I find 0YEA_QUA_MON_DAY hierarchy from 0CALDAY in RSA1? or any t-code? i've try RSH1, but not found. Megan Wu