Where can I get CD4047 or its match in Multisim 12?

where can I get CD4047 or its match in Multisim 12?
I am designing an INVERTER circuit in MULTISIM COMPONENT EVALUATOR 12.0 software.
but on doing so I can't find the IC (Integrated circuit) CD4047. I have tried to search CD4047 match component (can replace it) on the internet but not found?
1. What can I do or how can I replace its Match component?
2. In future when I design in Multisim, when I coudn't get components in the data base of MULTISIM, what solutions can you give me?
Hoping to get from your Answers
Thank you!

Experts,
There is the CD4538 which I believe is a similar chip (its dual - so you get 2).
1. If you locate the CD4047 model online, or you can use 1/2 of the CD4538, you can use the Component Wizard to import a custom component into Multisim.
2. There are various techniques to get models/parts into Multisim. If you can find an equivalent model you can use you can create a part using the Component Wizard. There are various SPICE modeling marco modeling techniques for creating models, but the complexity depends on the type of part and how much detail you need from the model. The best method is to locate the SPICE model from the manufacturer and follow our Component Wizard steps to import the new model into a Multisim part (usually with the most challenging step being the symbol - spice model mapping).
- Pat N

Similar Messages

My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X 8 from internet, is there any where can I get offline download of OS.

My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X mountain lion from internet, is there any where can I get offline download of OS file where I can install directely OS X Mavericks.

Hi, original poster here. I did not realize this would generate more discussion so I never checked back. I still had my warranty, so I took it to the store and got it repaired. The original problem I had was a screen with this icon flashing when I attempted to boot it up:
When I took it to the store, they told me that my computer was unable to communicate with the hard drive. I had this same problem three times in two months where this screen reappeared. Each time I went back to the store and they said the cause was different, but they were all hardware issues that physically made it impossible to communicate with the hard drive. After the third time, they simply replaced my laptop and I haven't had the same problem.
So in short: The reason you can't reinstall or move anything when you encounter this screen appears to be because nothing can communicate with the hard drive in the first place. You can't reach the disk or anything on it. So I don't believe it's possible to do anything besides take it to a physical store and have it fixed.

I have macbook pro i got it from craiglist, when i was updating the oprating sestem its asking me for sestem unlocking pin? where can i get it from?

i have macbook pro i got it from craiglist, when i was updating the oprating sestem its asking me for sestem unlocking pin? where can i get it from?

I would recommend wiping the system and reinstalling the OS for any used system. OS X does not have any "unlocking pin" of sorts so this may be from some third-party software on the system. The system does have a "firmware password" option that can be set to prevent booting to alternative boot environments (ie, external hard drives, safe mode, etc), but this will not prevent system updating.

My 2nd gen shuffle lost its drivers, where can i get them?

My 2nd gen shuffle lost its drivers, where can i get them?

Hi Chrissy197,
Thanks for using Apple Support Communities. If your iPod isn't being recognized properly by your computer and drivers are needed, I would recommend going through this article:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
You may find step 9 particularly helpful.
Cheers,
- Ari

I m login in th my iphone in the itune ti download something after entering cc details its asking about something itune gift card secure code...i am not getting this..where can i get this code in order to dowanload frm itune...

i m login in th my iphone in the itune ti download something after entering cc details its asking about something itune gift card secure code...i am not getting this..where can i get this code in order to dowanload frm itune...

Meen0902 wrote:
... after entering cc details its asking about something itune gift card secure code...i
Try the 3 or 4 digit code on the back of your Credit Card....

My IPad was stolen. Where can I get its serial number?

My IPad was stolen. Where can I get its serial number?

Pornwara wrote:
Where can I get its serial number?
See > http://support.apple.com/kb/ht1349
Pornwara wrote:
My IPad was stolen.
Lost or Stolen iOS device > http://support.apple.com/kb/HT5668

What is java proxy, why its is used and where can i get more info abt this?

Hi all!
My current scenario is File->XI->j2ee appl.
<b>Can XI sends file to my J2EE application using java server proxy.</b> If so how to develop that?
what are the requisites that my SAP system should have?
I have jdk1.5,Tomact5.0,eclipse3.1.2, NWDS2.0.9
Where can i get full step by step procedure to develop that. Please help me
Thanks

Hi
Go through these link:
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/97/7d5e3c754e476ee10000000a11405a/frameset.htm">Java Proxy</a>
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/5b/12b7e6a466456aa71ef852af033b34/frameset.htm">Configuring the Channel for Java Proxy Receivers</a>
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/c5/7d5e3c754e476ee10000000a11405a/frameset.htm">Java Proxy Objects</a>
Hope this will help.
Rgards
DhanyaR Nair

HT1947 Remote app requirements are stated as "software version 3.1.3 or later". I am running 4.2.1 and when I try to download it says 4.3 required. Where can I get the (old) version that runs on my IOS?

'Remote' app requirements are stated as "software version 3.1.3 or later". I am running 4.2.1 and when I try to download it says 4.3 required.
OK, I understand that new versions make use of facilities that come with new versions of IOS, but there is/was a version that runs on 3.1.3 and therefore, I assume 4.2.1. Where can I get the (old) version that runs on my IOS?
The app store seems to ignore all legacy equipment owners, and want me to spend loadsa money to get the latest shiny toy. It probably makes business sense, but I dislike companies that take that approach. This is my first venture into smart phones, and I like the IOS interface, but I'm not sure I can afford the maintenance.

The app store seems to ignore all legacy equipment owners, and want me to spend loadsa money to get the latest shiny toy. It probably makes business sense, but I dislike companies that take that approach.
This is standard for Apple. While there is little official mention of the software support lifespan for equipment, typical support has been about 4-5 years for computers. It strikes me that newer items, especially mobile devices, are not built as sturdily nor do they have the hardware upgrade capabilities required to keep up with newer systems. When we bought an iPhone 4S we were told by the person in the store we'd probably be looking at a newer model in two years. The iPhone 3G could be anywhere from 2 to 4 years old, putting it well into.
As for app availability, Apple typically pulls old software versions from its site when new versions appear. If it is a non-Apple app then I guess it is up to the vendor. It is indeed tiresome but it is not at all unusual. Since I only ever run used Macs, I download current versions even though my computer won't run them, stick them on a hard drive, then I have them when I upgrade to a newer used computer. If you run older equipment you have to learn a different mode of operation to exist with the Apple 'new and innovative' but 'forget about the old' philosophy.

Where can I get the driver for my HP DE8A4L external USB CD/DVD drive?

Where can I get the driver for my HP DE8A4L external USB CD/DVD drive?
On the label it says, Model HSTNN-PD06-91
and
HP PN: 518819-001 Rev.B
I've had my Mini 110-1000 running our music system for a couple of years, no complaints. When I wanted a CD/DVD drive, I purchased a DE8A4L external USB drive directly from HP. It didn't come with a driver disc. When I plug it in, the USB subsystem does not enable it. Device Manager shows a yellow exclamation point, saying, "Windows cannot load the device driver for this hardware..." It is running Windows XP Home Edition SP3.
What gives with this device?

Following up on tactic 2) above, I upgraded the BIOS from version F07 to the latest version available on the HP download site, version F19. This went well, but unfortunately the system still does not recognize the device.
When I try to Device Manager, and select the DE8A4L DVD device, and try "search for a device driver", it says it cannot find a better match for the driver already installed.
This Mini 110-1000 only came with 1 Gb RAM, and Windows XP Home. Is one of these a critical limitation for running an external USB DVD drive?

Where can i get a windows installation disc

i rebooted my hp pavillion g6-1159sa and the realised i had lost the windows installation disc, where can i get one for it from, (its on windows 7 64bit) help please

Hi:
It appears this model is sold in the UK.
You can contact HP at the phone number below and see if you can order a set of recovery disks directly from HP.
0844 369 0369 Mon-Fri 8.30-18.00
Sat 10.00-16.00
(except for Bank Holidays)
Calls cost 5p per minute.
If HP does not carry recovery disks for your model, you can order a set from their e-partner at the link below.
http://www.best2serve.com/page/rcd_hardware_related_products/?product_type_id=4&hardware_product_id=...

Where can I get an EPSON printer for the original iMac?

Where can I get an EPSON printer for the original iMac?

You should look for an Epson Stylus Color 740 or the higher-end 900 or 980, which are about 12 years old now. All have USB connectivity, and while the 900/980 is a better/faster printer, it's harder to find the ink tanks for it at the usual office supply stores. Ink tanks for the 740 series seem to be more readily available, without a special order. There were Mac versions of these printers (the 740i and 900i), with blue/ice housings that were color-keyed to match the fruit-colored "blueberry" iMac and Blue & White G3 mini-tower. There was no Epson printer that was color-keyed to the original Bondi Blue iMacs.

Where can i get an hdmi driver so i can get sound in my tv when connected to my hp pavilion dv6

where can i get an hdmi driver so i can get sound in my tv when connected to my hp pavilion dv6

Hi,
HDMI sound is actually comes with the video card. DV6 is a reries of dozens if not hundreds of models, which one is yours ? Please use the following steps to check and fix:
General Instructions for Setting Up HDMI Audio
Preliminary steps:
1. Plug the laptop into a power source. Some of the models have a power management scheme that will not allow for HDMI audio while running on batteries. Later, after you get your HDMI audio working, if you find that it still does not work on batteries you can change your power management settings in the Control Panel.
2. HDMI has its own audio driver separate from the audio system of the computer ( Sigmatel, IDT, or Realtek ) . It is incorporated into the graphics card's driver so make sure you have the newest version of your graphics card driver. On models with Intel graphics the HDMI audio driver will appear in the Device Manager as "Audio Device on High Definition Audio Bus".
3. Turn off the computer and TV before connecting the HDMI cable. Later, after you get your HDMI audio working, if you disconnect the cable while the computer is running and lose your audio, try closing and then re-opening whichever program you were using that generates audio.
4. Every time you try a different solution you should reboot the computer. HDMI audio is extremely finicky and seems to usually need a reboot.
Make the Connection:
1. Connect the HDMI cable to the computer and TV. If the TV has a "DVI/HDMI" port do not use it. Use a port for HDMI only.
2. Turn on the TV and select the HDMI port you are using. Adjust the TV settings to receive HDMI audio if any.
3. Turn on the computer. (Optional, some people close the laptop lid immediately after hitting the power button but I am not sure why. Most people should not need to do this.)
4. Optional. Some models do better if the TV is set to be the primary display. To set, repeatedly press Fn+F8 (or ctrl+alt+F4) to cycle through the settings (laptop display only/laptop display plus external display/external display only). Reboot the laptop.
5. Go to Start>Control Panel>Sound>Playback tab. Make "HDMI" the default device. (If "HDMI" is not there, right click in the white area and look under "Show Disconnected Devices" or "Show Disabled Devices" and see if it is there.)
Post Connection Problems:
1. If there is still no option to select "HDMI' as the default audio playback device, try re-installing or updating the graphics driver, or even try an older version. The graphics driver is the driver for HDMI audio, not the regular audio driver. A few people with Intel graphics had better results by uninstalling the graphics driver, rebooting, and letting Windows look for a driver (instead of downloading the driver from the Dell support site).
2. Try disconnecting and then reconnecting the HDMI cable.
3. If you are using Windows Media Player or Windows Media Center but get no HDMI audio even after it is selected as the default playback device, go to
Control Panel>Sound>Playback tab>Audio/Playback device>HDMI>properties>Advance>Exclusive Mode and uncheck "exclusive mode".
4. Try a different HDMI cable.
5. Try a different HDMI port on the TV.
Source: Dell forum
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Have a macbook alu running on osx 10.5.8... but need to upgrade software to run my iphone 5,, what do i need and where can i get it?

Hi
I have a Macbook alu running on osx 10.5.8
I cant get anymore software updates any more ..i guess because its too old?
However have just got an iphone 5 which it will not work with.
What software do i need to upgrade to and where can i get it
Thanks
Mark

PloppyPloppy wrote:
Hi
I have a Macbook alu running on osx 10.5.8
Hi Mark,
You need to Update to OS X 10.6.8 = Snow Leopard so you can Update iTunes to Sync your iPhone.
Upgrading to Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
Be sure to make a Backup of your Current System Before Upgrading...

HT5299 Where can I get a Thunderbolt SPLITTER? (Thunderbolt-Thunderbolt-Thunderbolt) I am unable to daisy chain due to no chassis outputs.

Where can I get a Thunderbolt SPLITTER? (Thunderbolt to Thunderbolt & Thunderbolt.) I cannot daisy chain because of no Thunderbolt OUTPUT on the chassis.

I have been keeping up with the Thunderbolt stuff for a year now. It is pretty disappointing that no one, Apple or otherwise seems to have any interest in Thunderbolt. I have a Thunderbolt external drive, and I am quite pleased with its speed.
I think there is an inherent flaw in how Thunderbolt works. It relies on devices to be daisy chained together. This is great concept, but there's a problem. Say I have a Thunderbolt Buffalo external drive, a Blackmagic Intensity device, and a monitor that connects via the Thunderbolt port. Oh wait, all 3 devices must be at the end of the chain! Even if I was to spend over $1000 on the apple monitor, I am still limited to the number of devices I can connect.
In other words if most Thunderbolt devices have to be at the end of the chain, then how on earth can the technology ever be truly useful?

Header Level Cash Discount For VBRK-VBELN, Where Can I get?

Hi Experts,
I know the # of VBELN of VF03 (VBRK), now, I need to pull the data of,
<b>1- Header Level Cash Discount - Condition Value and
2 - Header Level Cash Discount - Amount i.e.
% Value.</b>
Normally, I know the procedure is,
(The relationship is )
KONV-KNUMV = VBRK-KNUMV
For all the columns the field KONV-KWERT can be used
But, its ITEM level, where as I am looking for Header Level?
So, Where Can I get the VBRK-KNUMV Header level,
1- Cash Discount Condition Value data? and
2- Cash Discount Amount data i.e. %
Thank you,
Message was edited by:
Srikhar

ThanQ Sheshu,
No, there is no entry in KONV-KNUMH for KSHCL type of Discounts i.e. SKTV. THere r entries i.e. record #s for Pricing matters! I dont know Y?
So, It seems to b, I hv to use the follwoing code,
at new knumv
SUM (of types KONV-KSHCL = SKTV)
endat.
Or Do u hv any other clue? like, other tables searching?
anyways, thanq

Where can I get CD4047 or its match in Multisim 12?

Similar Messages

Maybe you are looking for