Where can I get Firefox 3.6.19? I hate the new Firefox and want to reinstall my old version.

I just downloaded and installed Firefox 4 and absolutely hate it. How can I go about reverting my version of Firefox back to the version 3.6.19 that I was previously running?

There isn't one by that revision number. The previous secure version is 3.6.17
To revert to that, please do the following:<br><br>
#Go to [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.17] and download it to the desktop.<br><br>
#Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box'').<br><br>
#Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox<br><br>
#Finally run the installation file you downloaded to the desktop earlier.<br>
Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.<br><br>
After you complete the installation, please go to the [http://www.mozilla.com/en-US/plugincheck/ Plugins Check] page and update where necessary.
''However, before you go that route, here are a few tips to make FF4 look like the previous version''.<br><br>
* Right click a blank part of the tab bar and click "Tabs on top" to remove the checkmark. Tabs will subsequently reappear below the search bar.<br><br>
* Repeat the same steps, but click the top one called "Menu bar". This will reinstate the text links at the top.<br><br>
* To rearrange the layout, repeat the same steps again and choose "Customize". A panel will open and while that remains onscreen, you can move elements like toolbars, buttons etc around and place them anywhere you wish. You can also drag anything you don't like into that panel and add anything you want by dragging it out of there.<br><br>
* To replace the status bar at the foot of the page, install this add-on: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/<br><br>
See screenshot. Both top and bottom views are FF4.

Similar Messages

  • Where can I get an Html error report of all the syntax and tag problems?

    Where can I get an Html error report of all the syntax and tag problems?

    Thank you for your answer.
    Where is the DW validation for me?
    My files are in my computer so I don’t have an external URL.
    File > validation > as xml = closes DW... Maybe because it is not a correct command for HTML,
    And
    Window > results > validation = gives a partial mistakes (e.g. shows an open tag without closing tag, but doesn’t show a closing tag without an open tag).
    Thank you.

  • I have a copy of Final Cut Express 2. Can I get a current upgrade instead of repurchasing the new Final Cut Pro?

    I have a old copy of Final Cut Express 2 that I never installed. Can I get a current upgrade instead of repurchasing the new Final Cut Pro?
    The Apple Store does not show does not contain purchase information of the old unused Final Cut Express. What can I do to register Final Cut Express 2 will not operate in the current OS systems on my iMac. It only is compatible with the G3 or G5.

    If you have a record/documentation of your FCS full version purchase, you can contact Apple here:
    https://ssl.apple.com/support/proapps/serialnumbers/
    to obtain your serial number.
    MtD
    Message was edited by: Meg The Dog to fix typo

  • How can I get my safari to open after installing the new Mavericks operating system?

    How can I get my safari to open after installing the new Mavericks operating system?

    Thanks Carolyn. Unfortunately, this didn't work. It turned out to be in my display monitor as I have my computer wired to my tv for streaming. Once I changed the monitor display it worked fine. Go figure

  • Why is there no warning that firefox 4 doesn't run on a powermac? where can I find firefox 3.6 to reinstall?

    So I responded to a prompt (while running Firefox 3.6 on my powermac) to download and install Firefox 4. Great! Well, the install and over-write of 3.6 ran smoothly, but trying to open Firefox 4 there was a message saying the hardware didn't support it. OK fine. But now I have no firefox. Where can I find 3.6.16 to install?
    The Firefox 4 beta from a few months ago DID run, so this is curious.
    thanks
    Don

    This oversight is inexcusable!! I am also running 10.4.11 on a PowerPC Mac, and I received a notification advising me to update to Firefox 4.0. I checked first, and not only was there no warning that it was compatible only with Intel computers running 10.5 or higher, but it showed that it required 10.4 or higher! Mysteriously, this is gone now.
    I lost everything, and now have nothing to lose by going back to Safari. You (Mozilla) axxholes have cost me a lot of time!!!

  • How can I get rid of windows 8.1 in my new lenovo and get windows 7 put in?

    How can I get rid of Windows 8.1 on my new Lenovo laptop and install Windows 7?

    Hi,
    I'll assume your laptop was upgraded from Windows 7 to Windows 8.1
    1. Start by copying all your personal folders (Documents, Pictures, Music, Videos, Favourites, local databases,
    hosts files, etc) into an external disk, DVD, tape, whatever.
    2. If I were you, I wouldn't use Windows 8.1 backup tool, I'm not sure Windows 7 Restore applet will be able
    to read a Windows 8.1 backup.
    3. Check that you have all the necessary licenses, CDs and executables to reinstall your former Windows 7
    applications, components, browsers, plugins, Java, .NET Frameworks, etc. Be aware that some applications require
    to keep same hostname and/or same IP and/or or same local username (or all of them) as they were on the original
    Windows 7 machine.
    4. Check that you have your Windows 7 CD and license handy.
    5. Do you have a Windows 7 image backup of your laptop (prior to the Windows 8 upgrade)?
    5.a Yes? Then restore that image and restore your personal folders on top. You might need to
    install or reinstall some of the applications I mentioned on #3
    5.b No? You'll have to format your laptop, install Windows 7 from scratch, create your local
    user with administrative rights, install SP1, install necessary updates, reinstall all your
    applications and finally restore your personal folders.
    Sebastian Sajaroff Senior DBA Pharmacies Jean Coutu

  • Where can i get a 45 Degree angle adapter for the laptop end of the G6 power supply.

    I am annoyed by the power cord sticking out at 90 Deg from the right side of my G6 Notebook . the plug obstructs the usb mouse and i am looking for a 45 Degree adapter to solve this problem.
    If HP make one of these then where / what site can i get it from .
    If HP do not make this type of adapter than can anyone let me know if they have seen a website so i can buy one.

    What is the exact model of the notebook?
    I am not certain about a 45 degree adapater, but most adapters are either straight or 90 degrees.
    Here is a list of various adapters.  
    Even though the adapter you have may be at a 90 degree angle, it should be able to rotate to where the cord is not blocking any necessary ports.  
    Let me know the exact model and product number so I can give something that is a little more specific.  
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Why do you force us away from genius iweb? Where can I get iweb to my mbook pro with Lion? Upgrade and loose iweb?

    Hi
    I´m new here so I don´t know if theese questions are reacheing the Apples staff or only for the community useres..
    But I put my frustration out here anyway.. :-) (and sry for my norwegian/eng)
    I have like 12 differerent wen sites that I manage, very simple made, but working, thats why I like iweb cos it´s simple and it works.
    I have now finnaly taken the step away for PC laptop also, so I went buying a brand new macbook pro weith Lion the other day.
    Wanted to work on the websites while and travelling, so I copied all the domain info from myc stationary mac to a USB, ready to put into my new friend..
    What????
    No iweb in the programs..
    So there goes that plan into pieces... How to I fix that case? Buying an old ilife and try to intall it?
    Then I wanted to upgrad my stationary mac... but reading forums before I do so... DO NOT UPGRADE IF YOU ARE USING IWEB!!!!
    Well, thats enough said for me to cancel upgrading for me..
    WHY ARE YOU FORCING US AWAY FROM YOUR IWEB???
    WHY NOT MAKE A PROGRAM THAT CAN COVERT OUR IWEB INFO TO ANOTHER PROGRAM?
    I THINK YOU APPLE GUY´S NOW ARE FORCING US TO DO MOORE AND MOORE STUFF... AND I DON´T LIKE IT ONE BIT!
    YOU ARE FORCING US TO LOOK OVER OUR SHOULDER AND BACK TO WERE PC IS AT THE MOMENT.. HAVE THEY IMPROVED SO I CAN GO BACK??
    So, as you can understand here, I don´t like the direction that where Apple is going, it´s very roude and to much business now a days..
    Not taking care of it´s customers I think..
    If you take my point here in basic norw/ eng...
    Ok, that smy frustrations, have a nice day all!
    Majortilt

    majortilt wrote:
    So there goes that plan into pieces... How to I fix that case? Buying an old ilife and try to intall it?
    That will work.  The latest version of iWeb does run on Lion (with a couple of quirks). 
    But be aware that iWeb is clearly a dead end;  fixes/updates/improvements are highly unlikely, and it may quit working with new versions of OSX (possibly even future updates to Lion).
    If you're using MobileMe as a host, that will stop in June of 2011, so you'll have to move your site elsewhere.  You can still use iWeb with it; a few changes are required on the Site Publishing Settings page, of course, but they're pretty simple.  And a few features won't work, but there are workarounds for them.
    I recently moved my iWeb site from MobileMe to GoDaddy, and it was relatively painless. 
    See https://discussions.apple.com/community/ilife/iweb for much more discussion.

  • How can I get my HP DeskJet 6540 to recognize the new ink cartridges I installed?

    Hi everyone. I have an HP DeskJet 6540 printer and I replaced the ink cartridges. After I replaced the cartridges, I aligned them and then did a test print. I noticed that the blank ink didn't print. I opened system preferences, and then I opened the printer utility. It says, "Device Status : Pen Failure." Current Supplies Levels says, "The current levels for the selected printer are shown below...Cartridge on the left (tri-color 97) is unknown and the the cartridge on the right (black 96) is missing." Oh, I forgot to mention that the print cartridge light on the left side is flashing. I went to the HP support website and it says that the problem could be an incorrect print cartridge, incompatible print cartridge, or problem with the (left/right) print cartridge.  The solution they offered was to remove, inspect and reseat the problem cartidge. It also said to clean the problem cartridge contacts. I did that and it still gives me the same results. I even reset the printer but still got the same results...
    So the next thing I try is the OTHER cartridges listed as compatible with my printer which is 94 (black) and 95 (tri-color). I bought the new cartridges, placed them in the printer and I still got the same message from the print utility. I took the latter cartridges back and got a refund and explained that none of the compatible cartridges are working with my printer. I kept the 96 and 97 cartridges in the printer and the light on the left continues to flash so now I'm here asking if anyone knows how I can get my printer to recognize the new ink cartridges I installed?  Are there any other solutions that I have besides throwing the printer out of the window? :-)
    Thanks everyone ;-)

    With all that you have done it does sound like the printer has a fault. If you haven't tried turning off the printer for several minutes, then this would be worth trying (maybe you have done this when you say reset the printer?).
    If the cartridge light on the printer flashes when you turn the printer back on then it sounds like a hardware fault - not the driver or the operating system. And this is not usually something a user can resolve so it would need repair. And for the cost of a new printer, why would you bother.
    If you plan of sticking with HP and getting another model that can use the 96 & 97 cartridges (let's face it, they often cost more than the new printer), then take the two existing cartridges to the store and see if they will let you check they are okay. No point throwing them out also if they still have a fair bit of ink still in them.

  • My Boyfriend has lost all of his contacts on his phone after down loading the new iphone soft wear why would this happen and how can he get them back                          how can you get back your contacts after down loading the new iphone soft wear

    My boyfriend has lost all of his contacts on his phone after downloading the new iphone softwear. why would this happen and how can he get it all back

    You don't have to post the same question at one minute intervals.  Somebody will answer it, but perhaps not in 60 seconds.

  • I have windows 7 and can't get my bookmark to come out of the bookmark folder and onto a toolbar that I CAN ACCESS WITHOUT GOING INTO THE BOOKMARK FOLDER

    I tried dragging from the site onto the toolbar, and even though that works on my Mac, doesn't on Win. 7. I saved Facebook to my bookmark toolbar in the bookmarks folder, but can't get it out of the folder.

    My iphone 4s just developed a similar problem.  Ultimately, after a visit to the Genius Bar at which I was offered a replacement phone for $149, I took the phone to a non-Apple repair shop which diagnosed the problem as tarnished pins in the docking connector and replaced the connector for $49.
    The symptoms I experienced were that the phone would not pull a charge.  I tried different cables, wall outlet versus computer USB connection, etc.  The screen stayed black until I depressed the sleep button, at which time the red battery / lightening bolt symbol would flash three times and then the screen would go black. 
    If your battery is dead, that icon will not show up at all.  If you get the icon, it means your battery is run down and needs to recharge, but the defective docking connector is preventing the battery from taking the charge.

  • HT1152 All this help info tells me to use idvd, but I can't get it to open.  I asked the applecare guy and he says the new macs don't include idvd any more, so why do all the menu and help items say to use it?  I know there's other dvd burner software, wh

    I want to burn my imovie to a dvd.  All the help info says to use idvd but I can't get it to open.  The applecare guy said idvd is no longer included in new macs, so why are all the instructions still saying to use it?  Is one of the other software offerings, like dvd Cfreator for Mac, ok to use for this?  What's the best one?

    Please clarify what you mean by "you can't get it to open". Is iDVD on your system or not? If this is a new iMac, iDVD is no longer bundled with new Macs, so the application just isn't there and hence of course can't be opened. You can still purchase it as part of the retail iLife '11 box, though, if you want it, and it would be less expensive than DVD Creator (which I have no experience with), even though you'll get some redundant applications.
    Regards.

  • Can I get my iPod touch 4G replaced for the new ipod touch 5G for some fee?

    I own an iPod touch (4th Generation) 32gb and after itouch 5g's release, i am willing to buy it but my dad will not buy me the new one, so can i get the new one in exchange of my previous ipod touch with some additional fee ?

    Apple will only give you a 10% recycling discount it you turn in an old iPod

  • I blew my motherboard on an old computer and hooked my old hard drive to the new computer and want to transfer my bookmarks to the new drive but cannot find where they are located on the old drive--any help?

    My motherboard went bad on my old computer, but the hard drive was OK. I purchased a new computer and hooked my old hard drive to it through a usb adapter. I would like to import or copy my bookmarks from the old hard drive to my new one, but I cannot find where they are. I was unable to determine this from searching articles on the web. Be advised that my old hard drive is basically nothing but a storage place for files at this point. My old operating system was windows XP, and my new system is Windows Home Premium.

    https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
    Your old Profile is located here in Win XP and W2K: <br />
    ''drive'':\Documents and Settings\''Windows login user name''\Application Data\Mozilla\Firefox\Profiles\''profile_name''

  • Where can I get Firefox portable 7.0 or 7.0.1 version for Mac/apple?

    My college's website requires version 5,6, or 7 of firefox to run. I think it be bad to downgrade so I'm trying to find where I can download a portable version safely.

    Have you tried using the website with Firefox 30? A lot of websites say they require a certain version, but they really work with more modern ones.

Maybe you are looking for

  • I am on a mac with Leapoard 10.5.8. How do I install bootcamp?

    So... I have recently delved into recreational gameing, and have very quickly found out that there arent very many games compatible on the Mac software. Ive asked around a bit, and everyone suggests Apple Bootcamp. Ive taken a look around on the appl

  • BDC  for purchase order

    Hi guys I have written the following program to upload the purchase order data by using BDC call transaction method, now I want to write whatever is in the message table, I mean the errors if there are any and the other required fields. So can you pl

  • Latest fw BB Curve 9320

    Hello CUrrently, the fw of my Curve 9320 is v7.1.0.714 Is there a more recent fw for the device? I have an unlocked (free market) Curve device, I normallu use Orange SIM card on it Thanks

  • Export estimate in oracle 9i

    How can I estimate the size of full database export in oracle 9i? I am talking about old exp in oracle 9i (not data pump of 10 g). thanks

  • Uninstall SOA Suite from Business Vista and then install again

    I have installed SOA Suite 10.1.3 on Business Vista laptop. Before this I had to change oraparams.ini of installation package to add entry 6.0 (Vista) for supported OS. Installation was on computer without Oracle database, so automatically it was mad