Where can i get info that how many languages suppo...

Where can i get info that how many languages supported by default in Nokia phone?
If i buy it in UK,how?
Many thanks!
Solved!
Go to Solution.

if you buy it in the UK, you would expect it to support your region's main languages or for Europe. for example, i am in asia-pacific region (australia) so the languages i have available to me are English, Pilipino, Tieng Viet and im guessing Japanase/chinese. so how many languages it supports depends on your region of course.
to check what languages are in your phone, goto Settings > PHone > Lanuage Settings> Phone Language (this is for S40 devices, no idea how to check in S60)
i hope this helps

Similar Messages

  • Where can I find info on how to install and run Snow Leopard Server as virtual machine inside Mountain Lion

    Where can I find info on how to install and run Snow Leopard Server as virtual machine inside Mountain Lion

    Here is the short answer:
    Installing Snow Leopard Server into Parallels 10 for DUMMIES:
    http://forums.macrumors.com/showpost.php?p=17285039&postcount=564

  • Shattered my screen where can i get it fixed how much does it cost?

    shattered my screen where can i get it fixed how much does it cost?

    Apple will exchange it for a refurbished one for this price.
    Apple - Support - iPod - Repair pricing
    A third-party place like the following may be less expensive.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Where can I get information on how to make a movie in FCPX with stills

    I am making a filmclip in FCP to my music, using mainly photos and short clips. Where can I get some information to help me. I am new to FCPX?

    There is lots and lots of information on the web.  I have only been using FCP for just over one year and among the sources I have found  helpful are:
    The Apple FCP X manual/help file is at http://help.apple.com/finalcutpro/mac/10.1/
    Introductory video tour at http://www.izzyvideo.com/final-cut-pro-x-tutorial/3-tour-of-the-interface/
    Articles by key community contributor,  Tom Wolsey at http://www.fcpxbook.com/updates/101/101libraries.html
    There are also lots of videos featuring specific topics at MacBreak Studio at: https://www.youtube.com/playlist?list=PL607BE2B2BFE9BE1A
    Then there is the FCP website at:  http://www.fcp.co/?view=featured
    Geoff

  • What is a refurbished iPhone? Where can I get it and how much does it cost?

    Hello,
    I have a iPhone 3GS (without warranty), but the battery is broken. I've heard of getting a refurbished iPhone. Can you explain me what it is expecially? Is it a new iPhone or what? Where can I buy it? And how much does it cost?
    Thanks

    You can look up all of this on Apple website.
    You can get the battery replaced if you like.  Since you make no mention of your country of residence, here is the U.S info:
    How much does iPhone Battery Replacement Service cost?
    Service arranged through Apple costs $79. A $6.95 shipping fee will be added if you arrange serviceonline or by calling Apple Technical Support. All fees are in U.S. dollars and are subject to local tax."
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model
    Out-of-Warranty Service
    iPhone 4S
    $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone
    $149
    A $6.95 shipping fee will be added if you arrange service online or by calling Apple Technical Support. All fees are in U.S. dollars and are subject to local tax. "
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

  • If my carrier (Congstar) doesn't provide updates, where can I get updates and how can I install them?

    My Alcatel One Touch has Firefox version 1.1.0.0-prerelease. When I try to Update my mobile phone it says, there are no updates, I have the latest version of the OS. But as I can see here the latest version is 1.3.
    How and where can get the latest version of Firefox OS? How can I install it?
    Thank you very much for your support!

    Hi mreichardt,
    There are no official v1.3 updates yet from Alcatel for the OneTouch Fire device.
    Please keep in mind that the OEMs (Original Equipment Manufacturers) are fully responsible for testing and releasing the updates, and that Mozilla still encourages them to provide users with the latest updates.
    Please see the following article for more information regarding updates for Firefox OS:
    * [http://www.cnet.com/news/after-upgrade-hiccups-alcatel-will-skip-firefox-os-1-2/]
    I hope you find this information helpful. Please let us know if you have any other questions.
    Thanks!!
    - Ralph

  • Where can I find info on how to add CRM custom fields and import data to them?

    Hi all,
    I am looking at the Extend CRM option in the V3 view.
    Is this new? Or have I just never noticed it before!
    Also is there a tutorial on it and info on how to import Customer data into these extra data fields?
    Thanks,
    Mary

    I'm just getting a good reply from online chat about this.
    Parikshit: First, go to customers -> Import Contacts (Advanced).
    Parikshit: http://rickynath.tk/jing/2012-06-07_0744.png
    Parikshit: Next, Scroll down and choose this option: http://rickynath.tk/jing/2012-06-07_0745.png

  • Where can i get info abt deadlocks

    Hi ,
    I want to get some info abt dead locks and when it happen.I have one scenario where 4-5 process writing to the same table at the same time.I want to find out how the process is gng to effect if i ncrease parallel processes.
    Thanks
    Anand

    Based on the above mentioned commands, it looks like it's just going to block the rows forever. Try the following
    1)Open two sessions of SQL Plus. Let's call them S1 and S2
    2)Run the following using S1
    CREATE TABLE DTEST (ID INT,NAME VARCHAR2(400));
    INSERT INTO DTEST (ID,NAME) VALUES (1,'NAME1');
    INSERT INTO DTEST (ID,NAME) VALUES (2,'NAME2');
    COMMIT;
    And then these
    S1: UPDATE DTEST SET NAME='NAME3' WHERE ID = 1;
    S2 : UPDATE DTEST SET NAME='NAME4' WHERE ID = 2;
    S1: UPDATE DTEST SET NAME='NAME4' WHERE ID = 2;
    S2: UPDATE DTEST SET NAME='NAME3' WHERE ID = 1;
    (While running the above mentioned commands,
    DBA_BLOCKERS, DBA_WAITERS views can be used to view the locks being held ofcourse
    by using separate sessions than the above mentioned ones)
    A deadlock will occur with the following error message
    ERROR at line 1:
    ORA-00060: deadlock detected while waiting for resource
    Hope this helps
    Regards

  • Where can I get info on translation rule semantics?

    I am looking for a comprehensive list of translation-pattern rule operators. I understand that they don't support wildcards. I have seen some examples with the "^" and others, but have never found any syntax related info.
    Can anyone help?

    Well here is a page that explains it somewhat:
    http://cisco.com/en/US/partner/tech/tk652/tk90/technologies_configuration_example09186a0080094681.shtml
    Here is a table of the supported characters:
    http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_command_reference_chapter09186a00801a7f32.html#2036716
    use the 'test translation-rule' command to check that your translations are doing what you want them to. Hope this helps....

  • Where can i find info on how to backup contacts and photos on iphone

    All I want to do is upgrade my os without losing data. How can i back up my data without using itunes?
    I tried itunes several times and it does not work. BTW i do not want to sync the phone, just back up data..

    Backing up photos: http://support.apple.com/kb/HT4083.  For contacts, you should be syning with a supported client via iTunes (Outlook 2003/2007/2010, Mac Address Book, etc.).  If you don't want to do that you could use the free app My Contacts Backup, which will create a backup that can later be used to re-import to your iphone in the future, if necessary.  If you want more comprehensive solutions you could purchase 3rd party software such as PhoneView or Touch Copy.

  • Where can I get info about Equium M50-236?

    Hey.
    I have check all over the internet for information about my laptop but there is no info.
    I think there must be info on Toshiba site, but no, and I think is very bad.
    My laptop is an Equium M50-236 (PSM57E-005009FS).
    The info I looking for is like: Which component/hardware I have and so on.

    Hello
    Your notebook is similar to Satellite M50-164. Both notebook have the same hardware components the same part number (PSM57E).
    More info you can find HERE
    Nothing is bad. ;) if you cannot find some info about your notebook just come here on this forum. ;)

  • Where can I get information about how apps work ?

    I have downloaded several applications to my iPhone. I don't know how to make some of them work. There must be a forum someplace to discuss the features and how they work. Someone know where it is ?

    If you downloaded them from iTunes then there are direct links to the makers websites, there will be instructions and tips on there.

  • I broke my display where can I get repear that

    I recently broke my Didplay of my ipod touch 4G do you know a Center where I can repear my ipod near Satelite Edo. de Mex.

    Do a Google search.

  • Missing oracle.jdeveloper.layout.* import. where can i get it?

    hi all.
    i'm very new to java, so i m sorry for the newbie question...
    well, i have overtaken an unfinished project. but this one needs the import
    oracle.jdeveloper.layout.*;
    which i do not have. where can i get it and how can i import it correctly? thank you.
    gr33tz
    j0sh

    thank you. i m working with eclipse, the project was built in oracle 9i JDeveloper.
    will the app be able to run on pc's too, that do not have these imports? i think it's sort of compiled before i release it as applet or a program? damn i'm a newbie...
    but where do i have to copy the stuff to, when i wanna use it in eclipse?? i don't really know which file i need, but i will find it somewhere i think on my pc in the jdeveloper's folder. but how can i reach it from eclipse?

  • Where can I get leopard for my imac G5?

    I would like to use Time Capsule for my G5, but was told I have to upgrade to Leopard. Where can I get one that is tailored for the imac? Apple Store doesn't sell it.

    Contrary to most opinions, you can get it from Apple Store's *phone sales*, 1-800-MY-APPLE (1-800-692-7753), for $129 USD. Alternatively, Customer Service and Sales Support at 1-800-676-2775.

Maybe you are looking for

  • Macbook Pro 13" Screen scratch?

    Well, I purchased my 13" Macbook Pro earlier this year, roughly march time, and since, have been very careful with it, with the intent of keeping it for a long time inn pristine condition. A little bit of OCD I guess. Well, what I've noticed is a scr

  • Printing more than one greeting card at a time?

    Does anyone know whether iPhoto 6 lets you print more than one greetings card at a time to save on postage? The postage changes for one type of card if you order 10 or more copies so I was wondering whether you could order 9 different cards (ie with

  • Plain HTTP adapter error: Bad Gateway, Proxy Error, please help !

    hello all, i have the following scenario: filesystem->file adapter->XI->plain http adapter-> receiver system. the following error occurred while calling plain http adapter: <SAP:Category>XIAdapter</SAP:Category> <SAP:Code area="PLAINHTTP_ADAPTER">ATT

  • Ifilter not working with Microsoft Indexing Service

    I'm running the Adobe Reader 9.3.1 on our Windows 2003 Server utilizing the Indexing Service.  Our indexing was working until something changed and we lost all indexing for any pdf.  Other documents were operating fine. I ran the install for the late

  • ABAP Sample Program for T Code FFB4

    Hi guys: I have the structure that t code FFB4 requires, but now I need to code a program for SAP to read the csv or text file and convert it automatically to match the structures required by FFB4 to post successfully. Does anyone please have a sampl