Where can i get Oracle JDeveloper 9i Handbook exercise source code?
Hi
I'm studying JDeveloper 10g by read the book <<Oracle JDeveloper 9i Handbook >> which written by Peter Koletzke,Paul Dorsey and Avrom Faderman, Where can i get exercise source code? In chapter 13,I can't create the application module AccountantPromotionModule,who can help me or some idea?
thank you
li xinzhu
2004.9.2
Hi,
You can download source code for the 9i Handbook from either of the following websites:
http://ourworld.compuserve.com/homepages/Peter_Koletzke
http://www.dulcian.com
Note that, if you're using Oracle JDeveloper 10g (rather than Oracle9i JDeveloper), you might be interested in the just-published Oracle JDeveloper 10g Handbook. Oracle JDeveloper 10g has some very significant differences from Oracle9i JDeveloper--especially the introduction of Oracle Application Development Framework (ADF)--and these are covered in the new book but not the old one.
If you do get the new book, you can download code for it (or rather, will be able to by the end of this week) from either of the above websites or from
http://avromroyfaderman.com
Hope this helps,
Avrom
Similar Messages
-
Where can i get oracle patch 8297200
hi,
where can i get oracle patch patch 8297200 for my oracle 11g?Download it from
https://support.oracle.com
You need a CSI number to download this.
Regards
Rajesh -
Where can I get Oracle 8i 8.1.5 for Linux (RH 6.0) On CD?
I'm stuck in a 28.8 baud neighborhood. Most of my connections
are 14.4 but at night - sometimes - I can get 28.8. There is no
Cable Modem support (Not available), not DSL (maybe by Q1 2999),
and ISDN is foolishly priced ($1800.00 to start and $300.00 per
month.) I have a smalll 100/T Base network with Win95, WinNT
4.0 (Server and Client) and Red Hat 6.0 Linux. I'd really like
to get Oracle 8i 8.1.5 Server for the Linux box and access it
via my NT Client. But, as I mentioned above, downloading is
very impracticle. It would take +100 hours and we have
power/phone outages almost every day. Where can I get this
stuff on a CD?
Thanks
Jeff Schwartz
nullOn the oracle store (oraclestore.oracle.com->database->media)
you can order a trial copy for $40 ($39.95). Allow me to ask you
where do you live? I wouldn't like to move into your
neighbourhood.
Jeff Schwartz (guest) wrote:
: I'm stuck in a 28.8 baud neighborhood. Most of my connections
: are 14.4 but at night - sometimes - I can get 28.8. There is
no
: Cable Modem support (Not available), not DSL (maybe by Q1
2999),
: and ISDN is foolishly priced ($1800.00 to start and $300.00 per
: month.) I have a smalll 100/T Base network with Win95, WinNT
: 4.0 (Server and Client) and Red Hat 6.0 Linux. I'd really like
: to get Oracle 8i 8.1.5 Server for the Linux box and access it
: via my NT Client. But, as I mentioned above, downloading is
: very impracticle. It would take +100 hours and we have
: power/phone outages almost every day. Where can I get this
: stuff on a CD?
: Thanks
: Jeff Schwartz
null -
Where can I get oracle 9i release 2(9.2.x.x) patch sets?
Hi. everyone.
Where can I get the patch sets for "oracle 9i release 2"?
I looked aroud this site, but I could not find it.
Additionally, I would like to get the document, explaining the detail
of bugs after oracle 9i release 2 (9.2.0.1).
Does anyone help me? Thanks in advance.
Have a wonderful day.
Ho.
Message was edited by:
user507290
Message was edited by:
user507290to forbrich
Thanks for your reply.
Have a wonderful dream. I think you are in dream now.
I am at the opposite side of the Earth you live.
Thanks again.
Ho.
from Japan -
Where can I get Oracle database server 9i for windows 2003
Hi,
I need Oracle Database Server 9i for Windows 2003. From Oracle online download, there is one a patch set available. Where can I get the full version?
Thanks
LauraHi, I found the solution. There is no software to direcly install Oracle 9i on Windows 2003. I need to install the software for NT/2000 first, the patch it.
That's why there is only patchset for 2003 for downloading. See the doc below:
three installation components required to install
Oracle9i Database release 2 (9.2.0.3.0) on Windows Server 2003. These three
installation components must be installed in the order listed. If you are
migrating a pre-existing Oracle9i database to Windows Server 2003, first
upgrade the database to the Oracle9i Database release 2 (9.2.0.3.0) patch set
before upgrading the operating system.
Obtain the following installation components:
Oracle9i Database Release 2 (9.2.0.1.0) for Windows
Oracle Universal Installer release 2.2.0.18.0 for Windows
Oracle9i Database Release 2 (9.2.0.3.0) Patch Set for Windows -
I need a Oracle Client version 10.2.0.2 or 10.2.0.5. Where can I get it? I tried oracle site, It only give me the base version of it 10.2.0.1.
My client application has to have the correct version. Does anybody know where can I get it?
This is urgent!
Thanks a lot!user12048533 wrote:
I need a Oracle Client version 10.2.0.2 or 10.2.0.5. Where can I get it? I tried oracle site, It only give me the base version of it 10.2.0.1.As others have notes - 10.2.0.5 could mean the future database & client patch set from Oracle Support, or the current Grid Control patch set from http://download.oracle.com
Assuming you mean the database client, 10.2.0.3 and 10.2.0.4 are currently available. If they are not available in base form for your platform, then you take the highest one that IS available and download and apply the related patches.
My client application has to have the correct version. Does anybody know where can I get it?
In which case you want to discuss about the Oracle Support contract that your client currently is using.
This is urgent!
Apparently not. If it was, you would ask in the correct place - Oracle Support.
You are asking in a forum of volunteers. There can, by definition, be nothing urgent in these discussions because you are not guaranteed an answer, never mind a timely answer. Even then the answer is not guaranteed to be correct. Especially since virtually none of the answers officially comes from Oracle. -
Where can I get oracle dead lock information
Hi Experts,
two days back I find oracle dead lock information at SM21 log file but when I checked today the old data was over written by new data.
Where can I find oracle dead lock information other than SM21? can anyone please help
Thanks in advance
Regards
Veera
Edited by: Veerab on Apr 27, 2011 8:22 AMHi,
Have you refered [SAP Note 84348 - Oracle deadlocks, ORA-00060 |https://service.sap.com/sap/support/notes/84348]? It contains good detailed description about possible oracle deadlock situations and analysis.
Along with the trace file generated by oracle (at directory /oracle/<SID>/saptrace/usertrace/), You can get historical information from alert<SID>.log file located at /oracle/<SID>/saptrace/background/.
In alert<SID>.log file the deadlock situation is written with deadlock graph at the time of occurances.
Regards,
Bhavik G. Shroff -
Where can I get Oracle Enterprise Manager (OEM)
I want to use/install Oracle Enterprise Manager (OEM).Could you please tell me where can I get this?
Thanks. I am going to use OEM.it requires tns enty.
abcd =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 11.8.7.18)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = efgh)
i suppose SERVICE_NAME means database name. My SQL *PLUS is working without any tns entry. So please tell me how I can get database name that is SERVICE_NAME and the very first line of the tns entry that is "abcd" in the above example. -
Error in Step 1 Chapter 19 - Oracle JDeveloper 11g HandBook exercise
Hi,
I was following Oracle JDeveloper 11g Handbook chapter 19 Step 1 on Jdeveloper 11.1.1.4 can gettnig the following error when running the application after completing step 1
Caused By: oracle.mds.naming.InvalidReferenceException: MDS-01161: Reference "/WEB-INF/editEmployee?flow.xml" has an invalid character "?".
at oracle.mds.internal.util.NamingUtil.handleInvalidCharacter(NamingUtil.java:1917)
at oracle.mds.internal.util.NamingUtil.validateOrEncode(NamingUtil.java:1662)
at oracle.mds.naming.ResourceName.validateName(ResourceName.java:743)
at oracle.mds.naming.ResourceName.validateResourceName(ResourceName.java:821)
at oracle.mds.naming.DocumentName.validateDocument(DocumentName.java:742)
at oracle.mds.naming.DocumentName.validateNameParts(DocumentName.java:569)
at oracle.mds.naming.ResourceName.<init>(ResourceName.java:121)
at oracle.mds.naming.DocumentName.<init>(DocumentName.java:179)
at oracle.mds.naming.MOName.<init>(MOName.java:101)
at oracle.mds.naming.DocumentName.createInternal(DocumentName.java:643)
at oracle.mds.naming.DocumentName.create(DocumentName.java:230)
Any leads onto this ?
the name of my tasfslow is as mentioned in the book "editEmployee-flow"
thnksThere were many defects and incompatibilities found with several jdeveloper versions.
Is JDev 11g Handbook code compatible with jdev version 11.1.1.2.0?
TUHRA chapter 20: Display of user info fails. NPE is thrown
Please consult the error page www.tuhra.com for further details.
NA
http://nickaiva.blogspot.com -
Where Can I get Oracle 8.0.5. or 8.0.4.trail edition
I would like to know where in the net I can find Oracle trail edition not for internet without letter i in the name.
My e-mail is cahnged [email protected]Dustin Cross wrote:
I have several systems still running 10.7. I have purchased 10.8. There is still no legal way for me to get 10.8.0?
I can download each update from 10.8.0, but I can not get 10.8.0?
Thanks,
Dusty
No, you can't, and again, 10.8.0 will not boot a late 2012 iMac even if you can find a copy. Only 10.8.2 has the necessary drivers for that hardware. -
Where can i get Oracle iFS Utilities
when i setup iFS1.1 which is downloaded from oracle.com,but this is no Oracle iFS Utilities in it.how can i get it?
Did you follow the installation instrcutions in the installation guide?
Refer to section: Installing the Oracle iFS Utilities. -
Hi, Everybody,
How are you doing?
I have lots of questions.
Q1)
I can't rebuild kernel of Solaris 8.0 source.
If someone has an answer, would you give it to me ?
It will help for me.
Q2)
In addition I want get login.c and passwd.c command source.
I unziped the CD of Solaris 8.0 source, buf I cannot find the source code for login.c and passwd.c command.
Would you help me ?
Thank youhttp://www.4shared.com/file/210566155/c080d93a/db_online.html
-
Where can I get Oracle for solaris x86
Besides click the ContactOTN in web page to submit the question
about this to them, I follow the link
http://platforms.oracle.com/sun/index_sun.htm and click "Ask Us"
link to send message to them too.
Am I wrong ? Can you give me the correct way to ask the question
KK
jeamaro (guest) wrote:
: KK (guest) wrote:
: : I read through the news group and find some mention there is
: : a version Oracle for solaris x86. Then I go to
: : http://platforms.oracle.com/sun/index_sun.htm too.
: : Can anyone tell me the straight method to get it ?
: : I have already sent several mail to ask about that.
: : There is nothing return.
: : KK
: There is a version of Oracle for Solaris x86. Although it has
: not been available thru OTN. To which email ID have you been
: sending your questions?
: Regards
nullBesides click the ContactOTN in web page to submit the question
about this to them, I follow the link
http://platforms.oracle.com/sun/index_sun.htm and click "Ask Us"
link to send message to them too.
Am I wrong ? Can you give me the correct way to ask the question
KK
jeamaro (guest) wrote:
: KK (guest) wrote:
: : I read through the news group and find some mention there is
: : a version Oracle for solaris x86. Then I go to
: : http://platforms.oracle.com/sun/index_sun.htm too.
: : Can anyone tell me the straight method to get it ?
: : I have already sent several mail to ask about that.
: : There is nothing return.
: : KK
: There is a version of Oracle for Solaris x86. Although it has
: not been available thru OTN. To which email ID have you been
: sending your questions?
: Regards
null -
Where can I get Oracle 7.3 Enterprise Edition for trial?
My potential employer is using Oracle 7.3. I am 8i DBA but never use 7.3. So I hope I can get the software to learn.
If you are familiar with 8i then you don't need a 7.3.
Only forget all about:
- java
- rebuilding indexes online
- Intermedia
- bugs
- locally managed tablespaces
Thomas
(you cannot donwload it because it is desupported years ago) -
Where can I get a list of Labview fieldpoint error codes?
I'm programming my application and want to act on some error codes such as failure to communicate but ignore others like some values out of range.
Assuming that you did a default installation, you can click Start-->Programs-->National Instruments-->FieldPoint 3.0-->FieldPoint Help. There is a category called Errors and Warning Codes. Under that category is two subcategories; FieldPoint Specific Error Codes and General Error codes. These two sub-categories should list most error codes that you will see.
Regards,
Aaron
Maybe you are looking for
-
Help Needed :- Upgrading to Windows 8.1 from Windows 8 on W540
I have tried repeatidly to upgrade to Windows 81 from windows 8 and it fails I get the driver power state failure error and error codes 0xc1900101 0x40017 . After 4 failures , i deleted drivers for Prinfing (pdf / printer drivers etc ) and some othe
-
I replaced my iPhone with a Samsung Galaxy5 and I am not receiving all of my text messages now. The rep at the store told me to go to iTunes and take my phone # off of the account and that would fix the problem. Is that true? What does iTunes have to
-
One of the local radio stations in the UK offers a live listen feed and i am unable to get it playing through my ibook. It works fine through my PC and I have tried downloading all the mac WM players etc with no joy. Here is the link, any help would
-
Getting line index at a certain point
Hi, I'm trying to get access to a line index in a paragraph at a certain point, for example mouse position. However, I only seem to be able to find methods to fetch line index at a text character position... Also, I'm struggling to be able to hold of
-
Batch classification during GR against production order using txn MIGO
Hello All I am usng batch classification during for movement type 101, when am doing the GR against production order using txn MB31 the system automatically navigates to classification screen wherein i need to enter the characterstic value & i