Where can i get oracle patch 8297200

hi,
where can i get oracle patch patch 8297200 for my oracle 11g?

Download it from
https://support.oracle.com
You need a CSI number to download this.
Regards
Rajesh

Similar Messages

Where can I get oracle 9i release 2(9.2.x.x) patch sets?

Hi. everyone.
Where can I get the patch sets for "oracle 9i release 2"?
I looked aroud this site, but I could not find it.
Additionally, I would like to get the document, explaining the detail
of bugs after oracle 9i release 2 (9.2.0.1).
Does anyone help me? Thanks in advance.
Have a wonderful day.
Ho.
Message was edited by:
user507290
Message was edited by:
user507290

to forbrich
Thanks for your reply.
Have a wonderful dream. I think you are in dream now.
I am at the opposite side of the Earth you live.
Thanks again.
Ho.
from Japan

Where can I get - forms6i patch 17

Hi all,
Where can I get the patch for forms6i (patch 17)
and what's the patch number i need to download (patch 17)?
Your instance help would be appreciated.
Thanks & Regards
Muthu

all patches are downloadable from Metalink
metalink.oracle.com
If you search in the Oracle Developer-section you find all forms versions and all patches available

Where can I get Oracle database server 9i for windows 2003

Hi,
I need Oracle Database Server 9i for Windows 2003. From Oracle online download, there is one a patch set available. Where can I get the full version?
Thanks
Laura

Hi, I found the solution. There is no software to direcly install Oracle 9i on Windows 2003. I need to install the software for NT/2000 first, the patch it.
That's why there is only patchset for 2003 for downloading. See the doc below:
three installation components required to install
Oracle9i Database release 2 (9.2.0.3.0) on Windows Server 2003. These three
installation components must be installed in the order listed. If you are
migrating a pre-existing Oracle9i database to Windows Server 2003, first
upgrade the database to the Oracle9i Database release 2 (9.2.0.3.0) patch set
before upgrading the operating system.
Obtain the following installation components:
Oracle9i Database Release 2 (9.2.0.1.0) for Windows
Oracle Universal Installer release 2.2.0.18.0 for Windows
Oracle9i Database Release 2 (9.2.0.3.0) Patch Set for Windows

Where can I get Oracle Client 10.2.0.2 or Oracle Client 10.2.0.5

I need a Oracle Client version 10.2.0.2 or 10.2.0.5. Where can I get it? I tried oracle site, It only give me the base version of it 10.2.0.1.
My client application has to have the correct version. Does anybody know where can I get it?
This is urgent!
Thanks a lot!

user12048533 wrote:
I need a Oracle Client version 10.2.0.2 or 10.2.0.5. Where can I get it? I tried oracle site, It only give me the base version of it 10.2.0.1.As others have notes - 10.2.0.5 could mean the future database & client patch set from Oracle Support, or the current Grid Control patch set from http://download.oracle.com
Assuming you mean the database client, 10.2.0.3 and 10.2.0.4 are currently available. If they are not available in base form for your platform, then you take the highest one that IS available and download and apply the related patches.
My client application has to have the correct version. Does anybody know where can I get it?
In which case you want to discuss about the Oracle Support contract that your client currently is using.
This is urgent!
Apparently not. If it was, you would ask in the correct place - Oracle Support.
You are asking in a forum of volunteers. There can, by definition, be nothing urgent in these discussions because you are not guaranteed an answer, never mind a timely answer. Even then the answer is not guaranteed to be correct. Especially since virtually none of the answers officially comes from Oracle.

Where can I get Oracle 8i 8.1.5 for Linux (RH 6.0) On CD?

I'm stuck in a 28.8 baud neighborhood. Most of my connections
are 14.4 but at night - sometimes - I can get 28.8. There is no
Cable Modem support (Not available), not DSL (maybe by Q1 2999),
and ISDN is foolishly priced ($1800.00 to start and $300.00 per
month.) I have a smalll 100/T Base network with Win95, WinNT
4.0 (Server and Client) and Red Hat 6.0 Linux. I'd really like
to get Oracle 8i 8.1.5 Server for the Linux box and access it
via my NT Client. But, as I mentioned above, downloading is
very impracticle. It would take +100 hours and we have
power/phone outages almost every day. Where can I get this
stuff on a CD?
Thanks
Jeff Schwartz
null

On the oracle store (oraclestore.oracle.com->database->media)
you can order a trial copy for $40 ($39.95). Allow me to ask you
where do you live? I wouldn't like to move into your
neighbourhood.
Jeff Schwartz (guest) wrote:
: I'm stuck in a 28.8 baud neighborhood. Most of my connections
: are 14.4 but at night - sometimes - I can get 28.8. There is
no
: Cable Modem support (Not available), not DSL (maybe by Q1
2999),
: and ISDN is foolishly priced ($1800.00 to start and $300.00 per
: month.) I have a smalll 100/T Base network with Win95, WinNT
: 4.0 (Server and Client) and Red Hat 6.0 Linux. I'd really like
: to get Oracle 8i 8.1.5 Server for the Linux box and access it
: via my NT Client. But, as I mentioned above, downloading is
: very impracticle. It would take +100 hours and we have
: power/phone outages almost every day. Where can I get this
: stuff on a CD?
: Thanks
: Jeff Schwartz
null

Where can i get Oracle JDeveloper 9i Handbook exercise source code?

Hi
I'm studying JDeveloper 10g by read the book <<Oracle JDeveloper 9i Handbook >> which written by Peter Koletzke,Paul Dorsey and Avrom Faderman, Where can i get exercise source code? In chapter 13,I can't create the application module AccountantPromotionModule,who can help me or some idea?
thank you
li xinzhu
2004.9.2

Hi,
You can download source code for the 9i Handbook from either of the following websites:
http://ourworld.compuserve.com/homepages/Peter_Koletzke
http://www.dulcian.com
Note that, if you're using Oracle JDeveloper 10g (rather than Oracle9i JDeveloper), you might be interested in the just-published Oracle JDeveloper 10g Handbook. Oracle JDeveloper 10g has some very significant differences from Oracle9i JDeveloper--especially the introduction of Oracle Application Development Framework (ADF)--and these are covered in the new book but not the old one.
If you do get the new book, you can download code for it (or rather, will be able to by the end of this week) from either of the above websites or from
http://avromroyfaderman.com
Hope this helps,
Avrom

Where can I get oracle dead lock information

Hi Experts,
two days back I find oracle dead lock information at SM21 log file but when I checked today the old data was over written by new data.
Where can I find oracle dead lock information other than SM21? can anyone please help
Thanks in advance
Regards
Veera
Edited by: Veerab on Apr 27, 2011 8:22 AM

Hi,
Have you refered [SAP Note 84348 - Oracle deadlocks, ORA-00060 |https://service.sap.com/sap/support/notes/84348]? It contains good detailed description about possible oracle deadlock situations and analysis.
Along with the trace file generated by oracle (at directory /oracle/<SID>/saptrace/usertrace/), You can get historical information from alert<SID>.log file located at /oracle/<SID>/saptrace/background/.
In alert<SID>.log file the deadlock situation is written with deadlock graph at the time of occurances.
Regards,
Bhavik G. Shroff

Where can I get Oracle Enterprise Manager (OEM)

I want to use/install Oracle Enterprise Manager (OEM).Could you please tell me where can I get this?

Thanks. I am going to use OEM.it requires tns enty.
abcd =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 11.8.7.18)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = efgh)
i suppose SERVICE_NAME means database name. My SQL *PLUS is working without any tns entry. So please tell me how I can get database name that is SERVICE_NAME and the very first line of the tns entry that is "abcd" in the above example.

Where can I get the patch for Oracle JMS to work with RDBMS 9.2.0.1

Hi,
In the following extract from Oracle documentation the patch is mentioned that needs to be applied.
"You must apply a server-side patch for Oracle JMS, which ships with Oracle9iAS Release 2 (9.0.3) and the OTN release of OC4J, to work with an RDBMS 9.2.0.1 database. This patch is documented as bug 2513629; see the Metalink Web site or contact Oracle support for more information. However, it is strongly recommended that users move to RDBMS 9.2.0.2 when it is available. Users do not need to apply any server-side database patches when running with RDBMS 9.2.0.2."
Where I can get this patch?
Is it RDBMS patch or OC4J patch?
I don't have access to a Metalink.
Thanks a lot,
Andrei

Check out the configuration on the mapping. There you can create a data file. Do that and fill out the other parameters for the bad and discard file in that node.
Jean-Pierre

Where Can I get Oracle 8.0.5. or 8.0.4.trail edition

I would like to know where in the net I can find Oracle trail edition not for internet without letter i in the name.
My e-mail is cahnged [email protected]

Dustin Cross wrote:
I have several systems still running 10.7. I have purchased 10.8. There is still no legal way for me to get 10.8.0?
I can download each update from 10.8.0, but I can not get 10.8.0?
Thanks,
Dusty
No, you can't, and again, 10.8.0 will not boot a late 2012 iMac even if you can find a copy. Only 10.8.2 has the necessary drivers for that hardware.

Where can i get Oracle iFS Utilities

when i setup iFS1.1 which is downloaded from oracle.com,but this is no Oracle iFS Utilities in it.how can i get it?

Did you follow the installation instrcutions in the installation guide?
Refer to section: Installing the Oracle iFS Utilities.

Where can I get Oracle for solaris x86

Besides click the ContactOTN in web page to submit the question
about this to them, I follow the link
http://platforms.oracle.com/sun/index_sun.htm and click "Ask Us"
link to send message to them too.
Am I wrong ? Can you give me the correct way to ask the question
KK
jeamaro (guest) wrote:
: KK (guest) wrote:
: : I read through the news group and find some mention there is
: : a version Oracle for solaris x86. Then I go to
: : http://platforms.oracle.com/sun/index_sun.htm too.
: : Can anyone tell me the straight method to get it ?
: : I have already sent several mail to ask about that.
: : There is nothing return.
: : KK
: There is a version of Oracle for Solaris x86. Although it has
: not been available thru OTN. To which email ID have you been
: sending your questions?
: Regards
null

Besides click the ContactOTN in web page to submit the question
about this to them, I follow the link
http://platforms.oracle.com/sun/index_sun.htm and click "Ask Us"
link to send message to them too.
Am I wrong ? Can you give me the correct way to ask the question
KK
jeamaro (guest) wrote:
: KK (guest) wrote:
: : I read through the news group and find some mention there is
: : a version Oracle for solaris x86. Then I go to
: : http://platforms.oracle.com/sun/index_sun.htm too.
: : Can anyone tell me the straight method to get it ?
: : I have already sent several mail to ask about that.
: : There is nothing return.
: : KK
: There is a version of Oracle for Solaris x86. Although it has
: not been available thru OTN. To which email ID have you been
: sending your questions?
: Regards
null

Where can I get Oracle 7.3 Enterprise Edition for trial?

My potential employer is using Oracle 7.3. I am 8i DBA but never use 7.3. So I hope I can get the software to learn.

If you are familiar with 8i then you don't need a 7.3.
Only forget all about:
- java
- rebuilding indexes online
- Intermedia
- bugs
- locally managed tablespaces
Thomas
(you cannot donwload it because it is desupported years ago)

OSS note 506603 What is it And where can I get it?

Hello,
I am trying to create my form with a SAP Table wizard connection, when I try to use the Table wizard I got the error: "No such interface supported". I can see in a lot of comments the solution is on OSS note 506603. I was trying to find this patch in the sdn site but I could not find it. I am not sure if it is a document, an exe file, a dll,,, and when I see the same question asking where to get the OSS note 506603 there is no answer, could somebody help me telling me what is this and where can I get the patch? I would really appreciate it.
Many thanks.

Hi Eden,
How are you doing ?
OSS note is the older nomenclature for what is now SAP Notes.
They are available at :
http://service.sap.com/notes
you will need a service marketplace user id to log on.
alternatively, if you do not have access to service.marketplace.
send me an email [view my business card], i will reply with the patch. it is a few hundred kb.
with respect,
amit
the note number 506603 :-
Summary
Symptom
Additional information for SAP.Net Connector that was not included in the guide.
Other terms
SAP .NET Connector, Proxy Wizard
Solution
SAP.NET Connector Version 1.0 has been available since Nov 21, 2002. You can download the software from http://service.sap.com/connectors.
Version 2.0 is also available. Use only the new version for new developments.
Report any problems with the SAP.NET Connector under the components:
BC-MID-CON-DNW for problems with the .NET Proxy Wizard for Visual Studio.NET.
BC-MID-CON-DNC for problems with Communication Runtime.
Known problems
1. The Proxy Wizard terminates with the error message "Exception caught in method createFunction for DD_GET_UCLEN Reason: null".
This is caused by a missing function module, which can be installed as described in Note 580834.
2. Corrections for SAP.NET Connector 1.0
The updated version corrects various problems that have been noted during the interim period. You can download it from http://service.sap.com/connectors. To install this version, see the "Release Notes" file. For SAP.NET Connect 1.x, the newest patch-version is called "1.0.3".
3. Corrections for SAP.NET Connector 2.0
For Visual Studio Integration (Design Time) following problems have occurred:
For proxies with several functions, the following runtime error can occur under certain circumstances: "Method xyz can not be reflected." The cause is a combination of an error in the .NET framework and the way in which the proxy generator uses XML-attributes.
The SAP wizard table does not work. Existing tables are not recognized.
Both problems are solved by the patch attached to this note. Stop all instances of Visual Studio and unpack the ZIP file into the "%Program Files%\Microsoft Visual Studio .NET 2003/Common7/IDE" directory, whereby the "SAP.Connector.Design.DLL" file is replaced.
Header Data
Release Status: Released for Customer
Released on: 10.12.2004 16:40:26
Priority: Recommendations/additional info
Category: Installation information
Primary Component: BC-OP-NET-NCO SAP .Net Connector
Secondary Components: BC-OP-NET-VS Visual Studio .Net Connector Wizard
Message was edited by:
amit chawathe

Where can i get oracle patch 8297200

Similar Messages

Maybe you are looking for