Where can I get Palm Windows Mobile SDK

Hi, I know this is not the right place but I am out of option.
I desperately need to get hold of the Palm Windows Mobile SDK - need to programmatically control the POWER ON pin on a Treo 750. But the download link on the Palm developer network, https://pdnet.palm.com is not working - "Access Denied". I got no response to my email requests from the Palm developer network, I guess that site has been abandoned.
Could someone kindly tell me who I should contact about this or tell me where I can get a copy of the SDK?
Palm should at least re-instate the SDK download link. It would also be nice to put a notice there so people know what level of supprot is expected there.
Post relates to: Treo 750
Post relates to: Treo 750 (AT&T)

Are you able to log in? Did you get the validation email from Palm to activate your account?
I'm viewing the right-hand column where a list resides labled "Windows Mobile SDK".
Palm Developer Guide, Windows Mobile Platform
Windows Mobile API Guide
Sample Codes
Header Files
The link above these selections is alive, and I'm taken to a download section.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.

Where Can I Get A Windows 7 Logo For My T500?

Hello,
I just got my T500 with Vista. I'm anxiously awaiting my W7 upgrade. Where can I get the Windows 7 logo / sticker to replace the Vista one? Thanks.
Bob Helms

There seem to be available on ebay
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Where can i get a windows installation disc

i rebooted my hp pavillion g6-1159sa and the realised i had lost the windows installation disc, where can i get one for it from, (its on windows 7 64bit) help please

Hi:
It appears this model is sold in the UK.
You can contact HP at the phone number below and see if you can order a set of recovery disks directly from HP.
0844 369 0369 Mon-Fri 8.30-18.00
Sat 10.00-16.00
(except for Bank Holidays)
Calls cost 5p per minute.
If HP does not carry recovery disks for your model, you can order a set from their e-partner at the link below.
http://www.best2serve.com/page/rcd_hardware_related_products/?product_type_id=4&hardware_product_id=...

Where can I get a windows installer disc for the bootcamp installation process?

I use an imac 10.9.5 maverick, with a 3.06 GHz intel core 13 processor, and a 4 GB 1333 MHz DDR3 memory. I am using BootCamp 1.0, and I need a windows installer disc to complete the installation process. Where can I get one of these discs?

Try Amazon, E-bay ........
buy windows installer install disk

Where can i get a windows 7 installation disc, and how much would it cost.

I need to know where i can get this installation disc, could somebody send me a link to like amazon where i could buy the disc. Please help me out.

If you have some Windows experience, you could get the Windows 8 Customer Preview which will last until next January. It is free. Possibly Windows 7 will cost less after 8 is available
at cost (like an old iPad?).
There is also a User guide here
http://windows.microsoft.com/en-US/windows-8/consumer-preview
The consumer preview download here is only if you already have Windows but you can get ISO below.
Write down the product key which is needed at install time and select language, 32 or 64 Bit.
http://windows.microsoft.com/en-US/windows-8/iso
In Mac, you need to run Boot Camp to create Windows space before install from ISO at boot.

Where can I get an external mobil hard drive to back up my PowerBook G4 without the Intel processor?

Where and what kind (brand) of external, mobil hard drive can I get to back up my PowerBook G4 without the Intel processor? I have 93GB of Memory and operating system OS X 10.5.8. Thank you.

Donald Morgan wrote:
Gee, I hope I understand this right, you can get a Terabyte from Walmart for around $120.00.
There is one major problem with the drives you get from just walking into a Walmart or Costco or Best Buy: They are usually one interface only, and that interface is USB. That's not a problem for new Macs with USB 3, where mass-market USB 3 drives are a great and cheap solution.
But for regular transfers with older Macs, I have always found great benefit in using a drive with multiple interfaces that bridge old and new Macs and PCs. The USB version in the PowerBook, USB 2.0, has always been a slow solution. It's slower than FireWire 400, FireWire 800, and Gigabit Ethernet. For my regular backups on G3/G4 Macs and most MacBook Pros, FireWire or Gigabit Ethernet have always been the way to go because they just save so much time over USB 2.0. Maybe not for small incremental daily backups, but when moving large collections of music/videos/photos, or especially when migrating to newer equipment.
That is why like the others here, I greatly prefer the OWC drives with multiple interfaces. The slow, awful USB ports work well for old FireWire-less Macs and for PCs, while FireWire 800 and eSATA get full-disk backups and mass transfers done in a fraction of the time as the poor soul waiting for USB 2.0 to finish. (Today's multi-TB disks can take hours to copy even with FireWire 800.)
If the priority is to save money over saving time, a cheap USB drive is fine, and USB 3 will be much faster than FireWire when you get a new Mac. But I've long valued the ability of a multi-interface drive from OWC to plug into any Mac or PC put in front of me and be able to transfer data using whatever the fastest option is.
I wouldn't worry about formatting drives from non-Mac stores since that takes about 10 seconds in Apple Disk Utility.

Where can I get the Windows 7 64 bit driver for the MBP (6,2)?

I have to install Windows 7 for work. I have my hard drive partitioned for triple boot, with Ubuntu 64 bit on one partition, and Windows 7 64 bit enterprise installed on another. Both boot fine; Ubuntu found all its drivers automatically (well done, guys!), but Windows of course cannot. Boot camp assistant refuses to download the drivers because I've already partitioned the drive. (Pardon my frustration, but that is a completely brain-damaged software design decision. -1 to apple.)
Is there any way to get the drivers?? Even just for the wireless card?? This is unbelievably frustrating. It's 2011 - stuff is supposed to 'just work,' and playing coy little hide-the-hardware-driver games does not 'just work'.

Alas, no dice. I was able to skip the compatibility check and run the bootcamp installer, and the 3.1 and 3.2 updates. However, I still have no wireless. The device manage shows it as an unknown network card.
linux lspci identifies the ethernet and wifi cards as:
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet PCIe (rev 10)
03:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01)
the ethernet card is recognized in windows, but the BCM43224 is not.
under linux the BCM43224 works out of the box using the standard "wl" driver with Broadcom's recently open-sourced firmware.
But I'm having a hard time finding any other Windows drivers for it: searching broadcom's site and windows support doesn't give me anything, and google just gives me loads of what look like pay-to-download scam sites and malware. Have I entered some weird parallel reality where wifi support is better in linux than in windows? :lol: that can't be, maybe I'm not configuring something correctly.

Where can I get CS4 (Windows) install media?

I am migrating from one PC to another, and I want to install my registered CS4 Master Collection onto the new machine. Unfortunately I cannot find my install DVDs! I have contacted Adobe and have spoken to Provantage, the reseller where I purchased the software--both of them assure me that the DVDs are no longer available and that there is no way to download the software. I need help! Can someone direct me to a source where I can get replacement media, or to a link to download the software? As much as I would like to upgrade, which would obviously solve the problem, I simply don't have the money to do so at this time. Help!

just about everywhere

Where can I get a Windows 7 64bit driver for my LaserJet CP1215?

According to the product info, my LaserJet CP1215 is supported under Windows 7 64bit:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01539618&lc=en&dlc=en&cc=us&product=3422476#N10...
But the driver package available for download is the same whether I select 32- or 64 bit Windows 7.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3422...
Needless to say, it is not working...although there are no error messages on installation or anything else. See http://h30434.www3.hp.com/t5/Home-Web-Printing/LaserJet-CP1215-wont-print-gets-unspecified-error-on-...
So what do I do, to print to this printer on Windows 7 ??
Help appreciated!

I'm seeing different 32bit and 64bit packages.
ftp://ftp.hp.com/pub/softlib/software10/COL22389/ly-59012-2/ljcP1215-HB-pnp-win32-en.exe
ftp://ftp.hp.com/pub/softlib/software10/COL22391/ly-59118-2/ljcP1215-HB-pnp-win64-en.exe
Suggest you try the latter link.
Found the information here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&os=4063&product=34224...
You're lucky - HP didn't even bother to make a Windows 7 driver for my HP 1010.
Cheers,
Peter

Where Can You Get The Windows Version Of Appleworks?

I Have The Mac Version Of Appleworks 6.2.9 The Version for os 9 and I am lookin for the windows version.NOT THE UPDATER
Thanks. Ben

HI Ben,
The Windows version of AppleWorks 6 was distributed only to the Education market. If you have access to that field, you might be able to pick up a previously owned copy.
The last update was to version 6.2.2/
Regards,
Barry

Where do I get the Windows 8 install disk

My Computer - Macbook pro 15", Retna Display (mid-2012), 2.3 GHz Intel Core i7, 4 GB 1600 MHz DDR3
So I would like to be able to play some pc games on my mac. I have bootcamp and I know to hold the options key after each restart to change, but my question is where can I get a Windows 8 disk that it ask for (it ask for windows 7 but the apple guy told me windows 8 would work). I would like a link, not just a comment like, bestbuy. Which they probably have anyways....

When you buy the Product Key from the Microsoft Store, the Download Manager (.exe) when run allows you to download an ISO image. An ISO image is a software disk image of a physical CD/DVD which can be burned to a physical CD/DVD depending on size.
From the Microsoft link...
Overview
When you download Windows from Microsoft Store, you have two options: You can download a collection of compressed files, or you can download an ISO file. An ISO file combines all the Windows installation files into a single uncompressed file.
If you choose to download an ISO file so you can create a bootable file from a DVD or USB drive, copy the Windows ISO file onto your drive and then run the Windows USB/DVD Download Tool. Then simply install Windows onto your computer directly from your USB or DVD drive.
When you download the ISO file, you must copy it onto a USB or DVD. When you're ready to install Windows, insert the USB drive or DVD with the ISO file on it and then run Setup.exe from the root folder on the drive.
On a Mac, once you have the ISO file, you can burn it to a physical DVD using Disk Utility (Yosemite): Burn a disk image to a CD or DVD.

Where do i get a windows install disk???!!!!

where can i get a windows install disk? do i have to buy a new windows os?
thx

No because then you will have not only have installation issues but also validation issues. If you are using Boot Camp on your Mac to install any of the windows versions then you will need a FULL version of the Windows operating system.
Axel F.

Where can i get the macbook pro (2010) bootcamp drivers for windows 7?

I recently decided to install windows 7 ultimate (32-bit) on my macbook pro (2010 model). However my macbook did not come with installation disks, i know this for a fact and it came pre installed with 10.6. And when i try to download the windows support files through bootcamp assistant, it says that the download cannot continue. So where can i get these drivers from?

All MBP's with Snow Leopard (10.6) came with an installaton disc, and that is where the drivers are, if you don't have (or didn't get) the disc contact Apple for a replacement, there is no downloadable version of BC3

Where can I get driver for network scanning on my Laserjet Multifunction M1120n for Windows 7?

Where can I get driver for network scanning on my Laserjet Multifunction M1120n for Windows 7 64bit? It must be the Windows 7 driver of Scanto.msi. Thank you for your support.
This question was solved.
View Solution.

Hi,
Unfortunately any HP Software component (HP Toolbox, HP Scan, etc.) for this product support 32-bit envoirnment only.
As you may find by the User Guide, only basic Print and Scan drivers provided for 64-bit (Page 14):
http://h10032.www1.hp.com/ctg/Manual/c01072750.pdf
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Where can I get Palm Windows Mobile SDK

Similar Messages

Maybe you are looking for