Where can I get replacement install Cds of earlier versions?

Hi
I've acquired a very cheap old secondhand G4 Imac to use as a photolibrary and large E-photoframe.
Unfortunately the os needs to be reinstalled but the machine cames without any Panther CD's. Where can I get a replacement set of Panther (or perhaps Tiger) CD's without spending a fortune. The machine won't run Leopard so needs an earlier version of osx.
Apple used to have archived versions of it's osses available for download. Do they still do it? Presumably as 10.3 is now pretty old hat it would count as an arcived system...

Look over this list of iMac specs to determine what OS was originally installed. http://www.everymac.com/systems/apple/imac/index-imac.html
Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store *but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*. For other sources, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4) . Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray) (See Can I use another Mac's system restore disc on my Mac? ). Expect to pay (possibly a lot) more than the Apple list price of $129.
Also check these web stores: http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521 http://www.allmac.com/shop/index.php?cPath=5_10003
Possible Alternative if you are currently using Panther 10.3 – Do a Google search for Tiger 10.4 Upgrade DVD . It will upgrade your 10.3 to 10.4, but it doesn’t contain the full retail Tiger installer. Should be cheaper than the retail Tiger install DVD.
After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
http://www.apple.com/support/tiger/install/
You can also download the Tiger Installation and Setup Guide
http://manuals.info.apple.com/en/TigerInstall_SetupGuide.pdf
When you upgrade the OS, do it via Archive & Install. See About the Archive and Install feature http://support.apple.com/kb/HT1710
Be sure to select Preserve Users & Settings. Also, repair permissions before and after the install.
If you do a Google search for M9227LL/A (Panther 10.3 retail install CDs) or M9228LL/A (Family Pack), you may find a set. The CDs should be black with a white X.
After you install the base 10.3.x, update to the final Panther version 10.3.9. See Mac OS X 10.3.9 Update (Combo) http://support.apple.com/kb/HT2464
Suggest you join LEM-Swap for buying & selling Mac stuff. http://groups.google.com/group/lemswap
After you join, post a WTB (want to buy).
 Cheers, Tom

Similar Messages

  • Where can I get replacement restore CDs?

    I bought a MacBook Air (late 2008) on eBay, and the original owner had lost the restore CDs.  Where can I get replacement discs?

    Contact Apple Service, or a provider.
    https://locate.apple.com/

  • Where can I get a download for an earlier version of firefox the new version won't run on my computer

    I downloaded version 4 and replaced the old files. The new version won;t run because my Mac dose not have an Intell prossesor. I uninstalled the new version and I cant find the old version to download.

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

  • Where can I get replacement media or download for final cut 3?

    where can I get replacement media or download for final cut 3?

    There is no download for any install of Final Cut Pro before version X.
    For physical media, try contacting Apple Care support. Otherwise, ebay or alternative resellers is your only recourse for acquiring install discs.
    x
    edit: If you want Final Cut Pro 3, you'll need a PowerPC computer that can run OS9. If you mean Final Cut Studio 3 (aka FCS 2009) you'll have better luck finding something out there that will run on contemporary machinery.

  • Where can I get another install disk for my mac book pro?

    Where can I get another install disc for macbook pro?

    That procedure has changed in 10.7:
    Mac OS X 10.7 Help: Reset a login password

  • Where can I get replacement feet?

    I've noticed that I've lost one of the rubber feet from the bottom of my 1st-gen MBP. Where can I get replacements? Will an Apple Store sell them to me?
    Much thanks.

    Awesome. Thank you both.

  • HT1338 where can i get replacement discs of the operating system ...that originally came with my md311 17" macbook pro?

    where can i get replacement discs of the operating system ...that originally came with my md311 17" macbook pro?

    Call Apple and give them your serial number and they will send you the disks for a nominal charge.

  • I want to upgrade to Maverick but am currently running 10.5.8 where can I get a more up to date version in order to download Maverick?

    I want to upgrade to Maverick but am currently running 10.5.8 where can I get a more up to date version in order to download Maverick?

    Click here and read the entire page. Mac OS X 10.7 and newer don't support PowerPC software such as Microsoft Office 2004.
    (98384)

  • Where can I get replacement screws for the bottom of my MacBook Pro?

    I have a late 2011 13 inch MacBook Pro. I recently upgraded it from the stock 500 gigabyte 5400 RPM hard drive to a 750 gigabyte 7200 RPM Seagate Momentus XT Solid State Hybrd drive. When I was putting the screws back in the bottom case  I lost one of the small screws. Now the bottom case of my MacBook is little loose due to the missing screw. Where can I get a replacement screw?

    PowerBook Medic has screw sets:
    http://www.powerbookmedic.com/xcart1/_search.php?is_hc=Y&mode=search&q=screws
    iFixit:
    http://www.ifixit.com/MacBook-Parts/MacBook-Screw-Set/IF186-027
    eBay:
    http://www.ebay.com/sch/i.html?_trksid=p3984.m570.l1313&_nkw=macbook+screw+set

  • Can I get replacement install DVD?

    Hello all. My install DVD doesn't work. When I try to use it, my PB says it can't read it properly and that there is a fault. Can I get a replacement from Apple and how? Do I have to take it into an Apple Store to have it checked or something?
    Mark.

    Just a note,
    I am not sure where you purchased your copy of Tiger or if it came with your machine, (Software is machine specific). If you upgraded from 10.3.9 to Tiger you needed to use this DVD.
    http://members.aol.com/onlyftp/TigerFullVersion.jpg
    Be sure you always follow the recommended steps in the link below to maintain trouble free use.
    http://discussions.apple.com/thread.jspa?threadID=122021
    Cheers Don
    Contact Apple at 1-800-MY-Apple

  • Where can I get replacement software?

    I recently bought a used Macbook Pro but did not get the software, is there any place I can go to get replacement disks? The laptop had been slicked before I took possesion to ensure no personal data was on the hard drive.

    Hi nightblood-
    Greetings and welcome to the Apple Discussion boards
    The software should have been included so contacting the seller might be appropriate.
    Apple will provide replacement disks at a nominal charge.
    Luck-
    -DaddyPaycheck

  • Where can I get the lastest Adobe Flash Player (version 10) for my Dual 1.8GHz PowerPC G5?

    Can someone tell me how to get the lastest Adobe Flash Player (version 10) for an Apple PowerPC G5 computer with OS 10.5.8?

    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version, 10.2.152.25, 10.3.x beta, or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Version 11.0.1.152 is for Lion.
    * Unhelpfully, if you want the last version for PPC Macs, you need to go here:  http://kb2.adobe.com/cps/142/tn_14266.html  and scroll down to 'Archived Versions/Older Archives'. The first one on the list, Flash Player 10.1.102.64 is the one you download. More information here:  http://kb2.adobe.com/cps/838/cpsid_83808.html
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

  • Where can I buy replacement battery for macbook early 2008 edition

    hello,
    where can I buy a replacement battery for macbook early 2008 edition (white). Thanks

    http://store.apple.com/us/product/MA561LL/A/rechargeable-battery-13-inch-macbook -white?fnode=a2cccbd899382c314b01b098b93…

  • I have a A1312 computer but not original install discs. Where can I get replacements

    I have an A1312 Mac and I want to install a solid state hard drive. But I do not have the original install discs. My OSX10.9.2

    You can boot that computer using the retail copy of Snow Leopard:
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8.
    Replacement DVDs usually cost about $50.00. This is a little cheaper. Maybe you can tell us exactly what your final goal is? For example, after you install the SSD what do you plan to do with the HDD? Do you have an external drive enclosure in which you could put your HDD to use while getting the new SSD set up? Or, do you plan to get an OWC DataDoubler in order to put your HDD in the space occupied by your optical drive?

  • Where can i get new install discs for my macbook 2008 alluminum  model

    I seemed the misplaced my discs for my macbook early 2008 unibody (silver), i just got a new hd after my old one died and need to install the OS obviously. I was wondering where i would be able to acquire some discs? I have got my sisters discs from her macbook pro from late 2011, the OS version is 10.6.3 but they dont seem to want to install, i get an error before i can begin the install that says something along the lines of "not able to install this software on this macbook".
    Would i be able to buy the OSX snow lepoard disc from the apple website?and would that work perfectly or?
    Any help would be much appreciated. Thanks!
    edit: just looking at the model/build page and i found this:
    MacBook (13-inch, Aluminum, Late 2008)
    Oct 2008
    10.5.5
    10.5.6
    9F2088, 9F2533, 9G2133
    that is my model.

    Call Apple using the appropriate phone number on this page. They may make a small charge for the new disks.
    Best of luck.

Maybe you are looking for

  • Imported .mov files not showing up in IMovie

    I downloaded 6-7 .mov files yesterday.   All fairly short 5-10 second clips.  The first 3 imported just fine and showed up in IMovie where I am editing a movie. Afterwards, when I selected "import" the computer responded the same way, as if it was im

  • XI Archiving Problem

    Hi Our XI system is configured to archive and delete xml messages. All Interfaces has been defined for archiving. XML messages has been archived for all interfaces except one interface. It use to work earlier but somehow it is not working now. I  del

  • I need to press F1 and call a executable help file

    Hi everyone, how do i listen to a f1 key pressed event and call another executable help file (help.hlp). I've got an application based on swing. Thanks for your help !

  • The itune Program will not load at work why

    The Itune program wil not load at work why

  • How make things invisible in iMovie?

    I want myself to disappear in a video in iMovie. So its like I am dancing and then suddenly I am gone like a ghost. Can this be done? If so then how do I this? Please help. Thank you.