Where can i get sis 648 drivers??

Well, if you have an MSI Neo board with the SIS648, TRY HERE

Similar Messages

MOVED: Help!! Where can i get WD SATA Drivers for winXP-64 Bit

This topic has been moved to Operating Systems.
Help!! Where can i get WD SATA Drivers for winXP-64 Bit

>>http://www.intel.com/support/chipsets/sb/CS-028823.htm<<...

Where can I get Brother printer drivers?

I found on the local net the printer I want to share. MFC-685CW
I need the drivers, though, so I select to have them installed but get an error to do with network server connection or something.
I found them on the Apple site but when I run the 'BrotherPrinterDrivers.dmg', it complains that the package isn't properly signed. Also, there's a message saying the page is not maintained by Apple, anymore.
Anybody have a suggestion for where I might find Brother drivers my OS will accept?

Brother support: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?r eg=us&c=us&lang=en&prod=mfc685cw_us_as

Where can i get the macbook pro (2010) bootcamp drivers for windows 7?

I recently decided to install windows 7 ultimate (32-bit) on my macbook pro (2010 model). However my macbook did not come with installation disks, i know this for a fact and it came pre installed with 10.6. And when i try to download the windows support files through bootcamp assistant, it says that the download cannot continue. So where can i get these drivers from?

All MBP's with Snow Leopard (10.6) came with an installaton disc, and that is where the drivers are, if you don't have (or didn't get) the disc contact Apple for a replacement, there is no downloadable version of BC3

Where can I get drivers

Where can I get drivers for windows 7 for a presario SR1907CL?
Thank You,
birdaug

birdaug,
Here are the specs for your Compaq Presario SR1907CL Desktop Computer and its A8N-LA (Nagami2L) motherboard. Based on the specs, the following drivers should do the trick;
nVidia Chipset Driver v15.49 for Windows 7 64-bit (Ethernet, SATA/IDE, SMBUS, Away Mode Drivers as well as others)
nVidia Graphics Driver v307.83 for Windows 7 64-bit
Realtek ALC883 HD Audio Driver (check "Accept", click "Next", and select download location for 2nd item down list)
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

My 2nd gen shuffle lost its drivers, where can i get them?

My 2nd gen shuffle lost its drivers, where can i get them?

Hi Chrissy197,
Thanks for using Apple Support Communities. If your iPod isn't being recognized properly by your computer and drivers are needed, I would recommend going through this article:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
You may find step 9 particularly helpful.
Cheers,
- Ari

Where can I get jvc pro digital camcorder drivers?

Where can I get jvc pro digital camcorder drivers?@

You do not get camera drivers... you tell people here what CODEC your camera produces and then someone may have a suggestion
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

How and where can I get intel hd 4000 graphics drivers and controll panel to 3d settings ... I want to turn off my vertical sync! please someone has to help me with this problem!

How and where can I get intel hd 4000 graphics drivers and controll panel to 3d settings ... I want to turn off my vertical sync! please someone has to help me with this problem!

So are there any other ways to get there, or to change options there?
And is it plausible to use 3d vision (like nvidia its one) but than without an nvidia graphics card. for watching movie's and gaming etc.
Thank you!

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.

Where can I get driver for network scanning on my Laserjet Multifunction M1120n for Windows 7?

Where can I get driver for network scanning on my Laserjet Multifunction M1120n for Windows 7 64bit? It must be the Windows 7 driver of Scanto.msi. Thank you for your support.
This question was solved.
View Solution.

Hi,
Unfortunately any HP Software component (HP Toolbox, HP Scan, etc.) for this product support 32-bit envoirnment only.
As you may find by the User Guide, only basic Print and Scan drivers provided for 64-bit (Page 14):
http://h10032.www1.hp.com/ctg/Manual/c01072750.pdf
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Where can I find XP x64 drivers for Portege R500 - hotkey / power management?

Where can I find downloads that will enable power management or hotkey support for my Portege R500?
I have already installed drivers for everything except fingerprint reader (don't want), tpm (really don't want), and hdd motion sensor (tos620a) (not bothered about right now). Most drivers are latest from original vendor websites, or, failing those, from Toshiba's Vista 64-bit download areas.
Everything else generally works: wifi, graphics & chipset, sound, lan, bluetooth stack, cardbus, card reader, etc.
However, having done this, the following issues remain:
FN hotkeys don't work for suspend to ram, suspend to disk, *screen* *brightness* - essential to extending lifetime; FN hotkeys for numeric/direction pad, external monitor toggle *do* work
Dedicated backlight toggle button doesn't do anything
However, in order to get battery lifetime beyond ~2.5 hours and closer to the rated 7.1 hours, I'll need to turn some things down / off occasionally. What software can help and where can I get it, such that it works on Windows XP x64 edition?
Note:
I have tried the xp 32-bit packages that Toshiba supplies, they don't appear to work on x64. The 'ctrls' package requires 'cmod', but 'cmod' gives this error:
TOSHIBA Common Modules Setup
Not an ACPI machine. Cannot install TOSHIBA ACPI Logical Device.
OK
I have tried the xp 32-bit package called 'pwrsav'; it installs a bad help link to my start menu, and adds a couple of exes, tpsmain and tpsoddctl, to my auto-runs. These 32-bit executables quit immediately after execution.
I would have tried to install Toshiba's Vista 64-bit packages for hotkeys / common modules / power management, but the only one of the three I can find via toshiba.co.uk are common modules, and unfortunately that zip file only contains .inf, .cat and .sys files, no installer.
Motivation:
I'm using a fresh install both because the default Vista install is unusable (900MB memory used on a fresh boot desktop, drive split into multiple partitions, trial, adware and broken software installed left and right)
I'm using x64 because I'm a software engineer whose next product needs to work on x64, and this new laptop was a likely first candidate

You didn't link to the tool you found. If you meant this tool then, you should be aware it doesn't work on x64 on R500:
Display Tuner
Cannot detect monitor!
Your monitor does not support DDC control or your videocard is not supported by Display Tuner.
You cannot use Display Tuner in this configuration.
OK
It would be unlikely to work in any case, as display driver brightness isn't normally the same as the screen's brightness (hence power usage).
Maybe it's a communication issue, but I *have* found +original+ drivers for all essential components, just not for things like screen brightness - something that, to be honest, I more expect to be handled in firmware / bios, as that's been my experience on previous laptops, and is more reliable in any case, considering I could be running an oddball Linux or a completely different OS, or a CPU-intensive high-priority task.
The R500 series seem to be scrimping on the firmware and expecting OS utilities and dedicate yet another system tray icon to take over that job.
It does look like x64 is a no-go for mobile use on this machine, due to lack of firmware power management, which is a great pity as the point of such a light machine is mobility. I'll wipe it and install XP 32-bit and see how that goes.

I need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work? i use OS X

i need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work?

With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
So just go thru the motions of creating a proper printer instance:
Make sure the Mac "sees" the printer on the network.
System Preferences / Print & Scan
Click on the + button on the left column
Select the appropriate type of printer, will use IP for the rest of this
Select HP Jetdirect - Socket, default for HP network printers
Type the IP address or look it up
Name the printer for easy identification on the print dialog
Let the Mac identify the printer model or manually choose the driver
Click Add.
Once the instance pops up in the list, can click on Options & Supplies for further config.

I don't have IMAQ vision, where can I get some super basic easy VI's for IMAQ?

Hello,
I don't have IMAQ vision, where can I get some super basic easy VI's to get images from my IMAQ PCI-1424 board, without Vision?? is there some kind of tutorial that will help me get started from the ground up in designing VI's? Also I am trying to run the HL Snap in picture control.vi and I keep getting an error that says:
-1074397150 occured at IMAQ snap.vi
Possible reasons,
NI-IMAQ (Hex 0xBFF6022) wait timed out; aquisition not complete.
Why am I getting this??? it is driving me nuts, I don't know how to get a image on my computer from the IMAQ board. I can get one in MAX. Also in MAX I try to change the camera driver to Kodak because that is the boar
d that I have KLI-2113, but when I try to change anything under properties like the window size and then apply it, it says error removing old camera. why does that do that? Some of the other drivers sort of work and let me change the settings. I don't know if they work right though. I can get atleast some response to light from the CCD chip.
Anyways, thanks,
Brian

Brian;
There is an example on how to display images in LabVIEW without having the full IMAQ application.
You can always convert the images to bitmaps (flattening) and display them in a picture indicator. If you are going to do some image processing within LabVIEW, this may be the way to go.
About the error you are getting, hopefully the above example will help you in resolving the issue. If the problem persist, it will be more beneficial if you can post the code. Also, you may get better answers if you post your question in the Vision forum.
Regards;
Enrique
www.vartortech.com

Where can I get software for my Canon laser printer D420? I didn't think I would need it for an iMac

Where can I get software for my Canon laser printer D420? I didn't think I would need it for an iMac

HI wvpearson.
You can download the Mac OS X drivers for the imageCLASS D420 from the Canon USA website. Please click the link below:
imageCLASS D420 - Drivers & Software
Once you are at the site, your operating system will be automatically detected. Select DRIVERS and download the files listed.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666). Have a good day.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Satellite C850 - Where can I get and Win7 istallation .iso from?

Hi guys,
I've searched around and found lots of threads, but haven't actually found a solution.
I bought C850 with Win7-64-home-premium preinstalled for my wife.
First I wanted to decline Microsoft EULA and claim money back for Win7 licence, but I thought its only 50 or 60 quid, and I might want it once a year so I left it as is.
First impression - its Terrible slow !!!
I have an old NB100, with Atom and 2GB RAM running Linux witch I use from time to time when I work on the move and this old tiny netbook is A LOT faster then my new C850 with i3 and 8GB of RAM. I mean A LOOOOOT faster.
Then I run Mint Live-CD and then I saw how fast C850 can be if only given real operating system instead of Microsofts crapware.
Then I installed WIn7-64-professional and there was a BIG difference. It wasn't nowhere near as fast as on Linux Mint, but it was whole lot better then original install.
That was only to check how it goes on clean install. I do not have licence for Win7-pro for C850 and I have not even a slightest intention of paying for something as useless as Win7. People should be paid for all the suffering caused by Win7.
On the other hand I would gladly pay for Linux Mint and in fact I have made a nice donation to the project not long time ago :)
Conclusion - slowdown was casued by Toshiba bloatware (which is completely not needed for proper operation of laptop!) and all the other stuff like McAfee or Nero.
I've tried to do reinstall but the reinstalled Win7 comes with all this bloatware and I need clean Win7 install.
To cut short answers like "install and delete waths not needed" - that doesn't solve the problem for two reasons:
1) if install and delete, a lot of stuff stays on the system, registry entries, lots of files etc
2) I need and .iso of Win7, so I can slipstream few things and get rid of WHOLE LOT of useless things
Where can I get and istallation .iso from ?
I mean clean Win7 without all that Toshiba bloatware, McAfee, Nero and other rubbish.
Mind you, I purchased a laptop with Win7 licence so I do have LEGAL RIGHT to use Win7 on its own.
Any hint VERY MUCH appreciated.
Thank you.

On this forum you can find a lot of similar threads where people write about the same experience. We can discuss about this theme for days but the conclusion is always the same: new notebooks are delivered with recovery image that contains OS, all necessary drivers, Toshiba specific tools and utilities, additional software and some stuff that nobody needs.
Nobody force notebook owners to use recovery image like this. What you must do is OS optimizing. Remove all software you dont need, disable auto start for all not important stuff and check Windows settings. I do the same all the time and there is big difference how notebook runs, especially start-up time will be much shorter. On this forum you can find very interesting threads about that.
So my advice for you is to install recovery image again and optimize it. The performance will be OK and your wife will have nice piece of hardware for everyday work.
> 1) if install and delete, a lot of stuff stays on the system, registry entries, lots of files etc
Everything can be removed but if you dont do this it is definitely not so critical for notebook performance.
> 2) I need and .iso of Win7, so I can slipstream few things and get rid of WHOLE LOT of useless things
At first, you will not find iso file anywhere and slipstreaming will not work at all. You cannot unbundle recovery image and use parts that you need. It doesnt work on this way.
I just hope you have created recovery disc before you have started your testing phase.

Where can i get sis 648 drivers??

Similar Messages

Maybe you are looking for