Where can I get some introduction of Oracle Utility OMS?

Can Oracle NMS running on window 32 bit environment? Thank you!
Edited by: user542092 on Mar 6, 2010 6:47 PM

OP, please share the information where did you find? , it will help others too...
Edited by: user10456073 on Apr 2, 2010 7:47 AM

Similar Messages

  • I don't have IMAQ vision, where can I get some super basic easy VI's for IMAQ?

    Hello,
    I don't have IMAQ vision, where can I get some super basic easy VI's to get images from my IMAQ PCI-1424 board, without Vision?? is there some kind of tutorial that will help me get started from the ground up in designing VI's? Also I am trying to run the HL Snap in picture control.vi and I keep getting an error that says:
    -1074397150 occured at IMAQ snap.vi
    Possible reasons,
    NI-IMAQ (Hex 0xBFF6022) wait timed out; aquisition not complete.
    Why am I getting this??? it is driving me nuts, I don't know how to get a image on my computer from the IMAQ board. I can get one in MAX. Also in MAX I try to change the camera driver to Kodak because that is the boar
    d that I have KLI-2113, but when I try to change anything under properties like the window size and then apply it, it says error removing old camera. why does that do that? Some of the other drivers sort of work and let me change the settings. I don't know if they work right though. I can get atleast some response to light from the CCD chip.
    Anyways, thanks,
    Brian

    Brian;
    There is an example on how to display images in LabVIEW without having the full IMAQ application.
    You can always convert the images to bitmaps (flattening) and display them in a picture indicator. If you are going to do some image processing within LabVIEW, this may be the way to go.
    About the error you are getting, hopefully the above example will help you in resolving the issue. If the problem persist, it will be more beneficial if you can post the code. Also, you may get better answers if you post your question in the Vision forum.
    Regards;
    Enrique
    www.vartortech.com

  • Where can i get some magic trackpad feet?

    where can i get some magic trackpad feet?

    Contact these people.
    iFixit: The free repair manual
    But most DIY stores will have something you can utilise.

  • I want to know memory manament and data display algorithm in LabViEW.Where can I get some materials about them?

    I want to know memory manament and data display algorithm in LabViEW.Where can I get some materials about them? I need them to complete my essay .Thank you for your help.

    Memory menagement:
    http://zone.ni.com/devzone/conceptd.nsf/2d17d611efb58b22862567a9006ffe76/732cec772aa4fbe586256a37005541d3?OpenDocument
    About data display: what type of data you wat display?

  • Where can i get this package com.ack.util ?

    Hi all,
    where can i get this package com.ack.util ?
    Regards,
    Vishal

    It not a package from the core SE distribution. maybe findjar.com knows about it ...
    kind regards,
    Jos
    Edited by: JosAH on Oct 18, 2011 8:57 AM

  • Where can I get some information on a modded bios?

    I found this modded bios here for K8N Neo4 MS1725 boards. The name is W7125NCG.1C0. But I can't find any info on what exactly makes it special. Also, there was a thread with a bunch off modded bios's, but all the links are dead in it now. WHere can i get infor on those bios and where can i dl them? The thread is here:
    https://forum-en.msi.com/index.php?topic=59711.0
    and i am looking for the modded ms7125 bios

    Well Syar maybe deleted 'em. But don't be sad here are loads of modded MS-7125 bios versions:
    1. All Rebels Haven
    2. techpowerup
    BUT YOU NEED TO MAKE SURE WHETER YOU HAVE PCB 1.0 OR 3.0 ! Only use bios versions for your pcb version!
    3. oder direkt (or directly) MurdoK's (German MSI forum) XMOD1.D. A modded version of 1.D for PCB 1.0!
        or modded 5.3 bios for PCB 3.0 also by MurdoK: XMOD5.3
    Don't worry If on some of the pages only Platinum is mentioned. Platinum and Neo4-F are using the same bios.
    *Remember these are modded versions, not official ones! If something goes wrong only blame you but nobody else!*
    By the way W7125NCG.1C0 is no mod bios, it's the official version 1.C for K8N Neo4-F PCB 1.0.

  • Where can I get the Text to Speech utility for Captivate 4?

    I looked all over the Adobe site. Where can I find the text to Speech utility for Captivate 4 and the voices that go with it. A URL to the download site would be perfect.

    It has been discuss a few posts down to your recently, as indicated correctly by Micheal.
    http://forums.adobe.com/thread/944601?tstart=0
    Thanks,
    Anjaneai

  • Where can I get some feet for my 15" Macbook Pro (mid 2009) without the cost of A$200

    I am loosing my mind. Can anuone please help?
    I have a 15" mid 2009 Macbook Pro, that I love. It is my 6th Apple computer so it's not like I haven't contributed to the Apple estate.
    I use it for work and study so it pretty much runns continuously and has since its purchase in 2009. So, as you can imagine wear and tear are starting to show.
    3 of the 4 feet have come off and this is making me crazy. It does not ventilate properly and doesn't sit well on the desk. I have attempted to buy all manner of feet to fit it, but nothing works.
    So, I took it to my local Apple store a while ago in search of some replacement feet for it. Because, Apple have to inspect all repair jobs.
    I cannot buy, the feet alone, I must buy the complete bottom housing for it at the cost of A$199.00 (WHAT!!!, I HEAR YOU SAY!!!, and that is pretty much exactly what I said when I was told this by my apple genius (and yes, I did say Genius with a sarcastic tone), but certainly the thoughts that ran through my mind were far stronger).
    So, in my eternal search to make my perfectly working but incredibly annoying, beloved macbook pro be as good as ever, I have been to 2 "apple" dealers in the hope to buy this product at a cheaper price. Because, 1. I don't want the base, only the feet and 2. I don't want to pay 200 bucks for it.
    Anyway. the first purchase I made was through some dodgy chinese website. Apparently, there is no one at the other end, because all corespondense was ignored. But I did get my money back.
    But the second has really done my head in. www.applecomponents.com had advertised the part at $US69. So, I purchased and paid with paypal and all was well with the world. But, This morning I recieved the following email. And this is the entirity of the message from a business with obviously no customer service skill, not address, no phone number. Just a rude individual at the end of the email.
    Remember, this was the whole email...
    "so it's looking like this part was in the wrong bin. we don't actually have one. we can get new, but it would cost around $150.
    please advise?"
    ***? (and I am really holding back bolding that text and setting the font size to 68).
    In Australia, if a product is advertised at a price, that is what we pay for it.
    So, I re-check the website and the price has increase $100 but, it still says "in stock".
    Right about now, I am starting to get quite frustrated, with this faceless nameless person/company/shonk.
    I get in touch with some consumer experts and reply and I recieve the following reponse...
    "it was an honest mistake. we have a lot parts. we haven't sold one of these bottom cases for over 6 months. whoever labeled em' did it wrong. I don't have the part, but I have access to ordering it new with my vendor - hence the price change.
    feel free to call me anytime and we can talk it out.
    thanks
    phillip
    503-806-6423"
    (not really sure where this phone number resides so the 10 digits are useless)
    Now, Phillip is not the person I made the payment to. The payment was made to Alex Kraft.
    Who, After I demanded the product. Has just refunded my money and dissapeard off the planet.
    I am sick and tired of these shonks and it is now my mission to stop these people from trading.
    Sorry for my digression but, I feel, all should be aware of these people. Scammers.
    But, if anyone knows where I can get some feet from someone who will bloddy supply them at a price that is reasonable.
    Please let me know.
    Thanks

    your situation is not new.  Others have been told by Apple that they have to purchase the entire bottom panel in order to replace the feet.  There are engineering solutions that can solve this problem, but to pay nearly $200 to replace a part that costs less than $1 (I am being very, very conservative) to manufacture is too excessive.
    I have had the feet come off as well.  Fortunately for me, I have not lost them and have been able to replace them.  Why they cannot sell them individually is a puzzle to me.  Perhaps some bean counter at Apple feels its too much effort to have these items individually  in their inventory.  I have had nothing but good comments to say about Apple, but sadly this is an exception.
    To address your problem, I have seen second hand ones advertised on Ebay.  The price was a bit steep, $10 as I remember.  Other wise, wjosten's suggestion is the only alternative.
    Ciao

  • Where can i get some classical oop codes?

    in order to learn oop,i wanna get some codes,where????

    But seriously folks:
    If you want to see some object-oriented design and implementation, I would suggest looking at the source code behind the java libraries API.
    Start by picking some classes that you think will be simple, and start looking through the javadocs and the code.

  • Where can I get patches to migrating Oracle 8.1.7.0 to Oracle 8.1.7.3 ?

    Hi,
    I'm looking for downloads for Oracle 8.1.7.3 to MS windows
    I can get Oracle version 8.1.7.0 from OTN but I want version 8.1.7.3 !
    Please can someone tell me where I can download version 8.1.7.3 or patch to upgrade to 8.1.7.3
    Any help would be gratefully received,
    Thanks in advance,
    [email protected]

    metalink.oracle.com
    from Oracle Support

  • Where can I get the patch for Oracle JMS to work with RDBMS 9.2.0.1

    Hi,
    In the following extract from Oracle documentation the patch is mentioned that needs to be applied.
    "You must apply a server-side patch for Oracle JMS, which ships with Oracle9iAS Release 2 (9.0.3) and the OTN release of OC4J, to work with an RDBMS 9.2.0.1 database. This patch is documented as bug 2513629; see the Metalink Web site or contact Oracle support for more information. However, it is strongly recommended that users move to RDBMS 9.2.0.2 when it is available. Users do not need to apply any server-side database patches when running with RDBMS 9.2.0.2."
    Where I can get this patch?
    Is it RDBMS patch or OC4J patch?
    I don't have access to a Metalink.
    Thanks a lot,
    Andrei

    Check out the configuration on the mapping. There you can create a data file. Do that and fill out the other parameters for the bad and discard file in that node.
    Jean-Pierre

  • Where can I get some help with my Nokia Maps Licen...

    My problem is I bought a license and a Nokia n97.
    I originally bought the license on my n95 and was able to transfer my license to my new n97. But since I have upgraded to version 3.0 my license has dissapeared.
    I tried doing the sim card transfer method and that works up to the point where it tries to associate it with my new sim card (I changed provides when I upgraded). When it gets to this point it simply states "No updates" and then keeps trying again and again. I have rolled it back to version 2 and now have the same problem. 
    Unfortunately I have lost the email I got when I registered and I can't find any information on how to get this email resent.
    I have tried speaking with Nokia care here in Sydney, Australia and they said it is a known problem but there is no fix for it.
    I would like to try entering my license code again manually to see if thats possible. But I am told and I can see that nokia doesn't allow its customers to get this information again.
    Please do something about this Nokia. It's really a **bleep** situation.
    Solved!
    Go to Solution.

    zgeek wrote:
    My problem is I bought a license and a Nokia n97.
    I originally bought the license on my n95 and was able to transfer my license to my new n97. But since I have upgraded to version 3.0 my license has dissapeared.
    I tried doing the sim card transfer method and that works up to the point where it tries to associate it with my new sim card (I changed provides when I upgraded). When it gets to this point it simply states "No updates" and then keeps trying again and again. I have rolled it back to version 2 and now have the same problem. 
    Unfortunately I have lost the email I got when I registered and I can't find any information on how to get this email resent.
    I have tried speaking with Nokia care here in Sydney, Australia and they said it is a known problem but there is no fix for it.
    I would like to try entering my license code again manually to see if thats possible. But I am told and I can see that nokia doesn't allow its customers to get this information again.
    Please do something about this Nokia. It's really a **bleep** situation.
    Hi zgeek,
    I had a similar issue when moving from my N95-1 (maps 3.0 installed and licence upgraded) to my N86-1 (maps 3.0 pre-loaded). Everything was fine with the old SIM but couldn't transfer the licence across to the new handset and SIM.
    Nokia ended up giving me new licences as the old ones didn't want to work anymore.
    Have you searched your e-mail for the word "openbit"? Not sure if they just do Europe or the worldwide licencing sales.
    One of the Nokia staff that contributes to the support forums was able to assist me (see this thread), as long as you have your N95 IMEI and SIM and your N97 IMEI and SIM then they should be able to sort it - It took me 3 weeks to resolve  and cbidlake was excellent and prodding the right people.
    Hope that this helps., 
    Alun.
    N8-00 (Product Code: 059C5Q8 (UK Generic)) FW Belle (111.030.0609.377.01)
    Orange 5.1, NK702, 7110, 8310, 7250, 6230, N70, N95-1, N86 8MP, N8-00

  • Where can I get some easy tutorials on making two things: read on..

    I want to create a logo with a shine or light glare moving across it. I also want to do this for text.
    I'm making an eyewitness news logo and introduction. I'm working on a PC. I have premiere pro and AE CS4 versions.

    I did a tutorial on this a couple of years ago, but unfortunately, I don't have it online. CC Light Sweep should do the job for you. (comes with After Effects)  You can find some related tutorials here <http://www.motion-graphics-exchange.com/find/CC+Light+Sweep>
    good luck!
    elaine

  • Spamtowho_418: Where can I get some explanations?

    The spamtowho_418.exe-tool creates nice reports.
    Unfortunately, I can't explain/comprehend all the values. :oops: Is there a source where I can get more informations about 'Costliness', 'Rewrite Agents' and many other sections and terms?
    Has someone already "decrypted" such a report?

    Incrementations in the 'Rewrite Agents' section are caused simply by actions that state (in the logs) that the message is rewritten.
    Examples from the code comments (logfuncs.pl):
    Tue Jan 6 15:03:18 2004 Info: MID 2 rewritten to 3 by antispam
    #Tue Apr 5 17:34:20 2005 Info: MID 35381452 rewritten to 35381453 by antivirus
    #3.8.0:
    #Fri May 14 20:44:43 2004 Info: MID 6 rewritten to 7 by alt-rcpt-to-filter filter 'testfilt'
    #Tue May 3 06:07:03 2005 Info: MID 424576592 rewritten to 424576594 by antivirus(unsafe alt-rcpt-to) filter 'unknown'
    #Thu Aug 17 00:55:23 2006 Info: MID 1 rewritten to MID 2 by antispam (alt-rcpt-to) filter 'unknown'
    #Info: MID 386736 rewritten to MID 386737 by add-footer filter 'Footer Stamping'
    #Info: MID 419747 rewritten to MID 419761 by drop-attachments-by-filetype filter 'Block_Attachments'

  • Where can I get some sample videos?

    I've got my brand new Mac Book and Final Cut Express! My camera won't be here for another week! Anyone have a good place to go find some sample videos to play around with whilst I'm waiting for the camera to get here???

    I think you'd be very wise to invest in an instructional book ($25-30 US on Amazon) which will have lots of footage on an included DVD. Two excellent choices are Final Cut Express Editing Workshop by Tom Wolsky (frequent contributor to this forum) and Apple Pro Training Series: Final Cut Express by Diana Weynand.

Maybe you are looking for