Where Can I get sun-passthrough.dll

The install information for the ISAPI dll states to use sun-passthrough.dll but this dll is not included in the App Server 7 distribution. Can someone tell me where I can get this dll.

sun.com -> Downloads -> App Server -> Sun ONE Application Server 7 Add Ons
Chris

Similar Messages

Where can I get Workshop:

Hi,
I use change management software, and I used Workshop Compilers 98/12/15 C 5.0 to complie an extension to this CM software.
After a recent upgrade, teh software vendor will only support issues when the extensions have been compiled with Sun WorkShop 6 update 2 C 5.3 2001/05/15.
Now the latest Studio 11 has C Compiler 5.8, and after discussions with the vendor they have informed me that they have not tested with the latest compiler, and therefore cannot offer real support.
Where Can I get Sun WorkShop 6 update 2 C 5.3 2001/05/15. from? please?
I need to upgrade to this from the old 5.0 because when the extension is compiled with this, there is structure alignment problems which causes the extension to behave incorrectly.
again, Where Can I get Sun WorkShop 6 update 2 C 5.3 2001/05/15. from? please?
regards
S

WorkShop 5.0 has been obsolete for years, and is no longer supported.
WorkShop 6 update 2 is essentially End Of Life, meaning it will soon not be possible to buy it, and only limited support is available for it. (The product was released 5 years ago. In addition, it is not supported on Solaris 10, the current Solaris release. It's time to let go of this obsolete product as well.
Since Sun Studio 11 is free, you should strongly encourage the software vendor to support it. I would expect the existing software to compile and run without problems using Studio 11. You do need to be running Solaris 8 or later, however.
I asked someone else to respond to the question of buying a copy of WS6u2, assuming you really need it.

Where can i get sample tests for sun certification(programmer level)??

where can i get sample tests for sun certification(programmer level)??
advanced thanks
anu

Hi,
Check this link.
www.javaranch.com/maha
Goto the Mock Exams section. There is a table with links to free and paid Mock exams
on net. They are also rated for being close to the real exams and helping you learn.
Even the resources here is very good. They are also rated by users.
This is one of the best sites I have visited to prepare for the SJCP exam.
Hope this info helps.
Regards,
Roopasri Vittal
Developer Technical Support
Sun Microsystems
http://sun.com/developers/support

Where can I get Jaws.jar from Sun?

Where can I get Jaws.jar from Sun?
thank you.
while I use seach in download I do not find it.

// new class for jsObject!!!! since 1.4.2 compile this:
// javac -classpath "C:\Program Files\Java\j2re1.4.2_01\lib\plugin.jar" test.java
// since jaws.jar does not exsist anymore
// to compile with jaws: javac -classpath "C:\j2sdk1.4.0_03\jre\lib\jaws.jar" test.java
http://www.tek-tips.com/faqs.cfm?fid=5101

MOZcrt19.dll missing. Where can I get it?

Removed old Firefox, downloaded Firefox Setup Stub 22.0 -- started to get missing dll errors. Uninstalled, reinstalled, same problem. Did a search for all dll, found nspr4.dll in Yahoo Messenger folder, fixed that one. But I don't have MOZcrt19.dll anywhere on my computer. Don't want to use "free dll download" sites. OS was provided with my computer (XP Media Center, SP3), I have no disc. Where can I get MOZcrt19.dll safely? Anybody know? Thank you.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

OSS note 506603 What is it And where can I get it?

Hello,
I am trying to create my form with a SAP Table wizard connection, when I try to use the Table wizard I got the error: "No such interface supported". I can see in a lot of comments the solution is on OSS note 506603. I was trying to find this patch in the sdn site but I could not find it. I am not sure if it is a document, an exe file, a dll,,, and when I see the same question asking where to get the OSS note 506603 there is no answer, could somebody help me telling me what is this and where can I get the patch? I would really appreciate it.
Many thanks.

Hi Eden,
How are you doing ?
OSS note is the older nomenclature for what is now SAP Notes.
They are available at :
http://service.sap.com/notes
you will need a service marketplace user id to log on.
alternatively, if you do not have access to service.marketplace.
send me an email [view my business card], i will reply with the patch. it is a few hundred kb.
with respect,
amit
the note number 506603 :-
Summary
Symptom
Additional information for SAP.Net Connector that was not included in the guide.
Other terms
SAP .NET Connector, Proxy Wizard
Solution
SAP.NET Connector Version 1.0 has been available since Nov 21, 2002. You can download the software from http://service.sap.com/connectors.
Version 2.0 is also available. Use only the new version for new developments.
Report any problems with the SAP.NET Connector under the components:
BC-MID-CON-DNW for problems with the .NET Proxy Wizard for Visual Studio.NET.
BC-MID-CON-DNC for problems with Communication Runtime.
Known problems
1. The Proxy Wizard terminates with the error message "Exception caught in method createFunction for DD_GET_UCLEN Reason: null".
This is caused by a missing function module, which can be installed as described in Note 580834.
2. Corrections for SAP.NET Connector 1.0
The updated version corrects various problems that have been noted during the interim period. You can download it from http://service.sap.com/connectors. To install this version, see the "Release Notes" file. For SAP.NET Connect 1.x, the newest patch-version is called "1.0.3".
3. Corrections for SAP.NET Connector 2.0
For Visual Studio Integration (Design Time) following problems have occurred:
For proxies with several functions, the following runtime error can occur under certain circumstances: "Method xyz can not be reflected." The cause is a combination of an error in the .NET framework and the way in which the proxy generator uses XML-attributes.
The SAP wizard table does not work. Existing tables are not recognized.
Both problems are solved by the patch attached to this note. Stop all instances of Visual Studio and unpack the ZIP file into the "%Program Files%\Microsoft Visual Studio .NET 2003/Common7/IDE" directory, whereby the "SAP.Connector.Design.DLL" file is replaced.
Header Data
Release Status: Released for Customer
Released on: 10.12.2004 16:40:26
Priority: Recommendations/additional info
Category: Installation information
Primary Component: BC-OP-NET-NCO SAP .Net Connector
Secondary Components: BC-OP-NET-VS Visual Studio .Net Connector Wizard
Message was edited by:
amit chawathe

Where can i get an anti-reflection screen for my ipad 1 so i can use it outdoors?

I like to read in the sun. The glare and reflection from the ipad screen is uncomfortable. where can i get anti-reflective screen or cover for the ipad?

A Google or internet search is your friend.
Do a search for "iPad anti-glare".

Where can I get a demo of stream?

I have to make a stream module, where can I get a demo? thanks a lot.
[email protected]

Take a look at tablet and psli
http://soldc.sun.com/developer/support/driver/src/SUNWdrvs-8.html

Where can i get jdk 1.5 javadoc in Chm format?

Where can i get jdk 1.5 javadoc in Chm format?

no idea. don't think Sun distribute it like that, you could always compile it yourself, chm is compiled html, it's pretty straightforward to do, and I'm fairly sure there are free/downloadable HTML compilers available
google is your friend

Where can I get my questions about JMX answered?

Where can I get my questions about JMX answered?
In the Jungle Mix of the World Wild Web, where are the dwellings of the JMX denizens?
It recently came to my attention that the answer to that simple question may not be obvious...
I hope the information provided there
[ http://blogs.sun.com/roller/page/jmxetc#where_can_i_get_my ] will be helpful.
Cheers,
-- daniel

See this page
http://java.sun.com/products/JavaManagement/community/forum.html
Bye for now
CSJakharia

Where can i get jdk6.0

i simply want a jdk 6.0 coz i am installing netbeans 6.0.1.
but when i downloaded JEE SDK 5 from sun.com, it is a huge thing with many tools .
where can i get jdk 6 without any attached s/w

Aniruddh_Joshi wrote:
i installed this one 4m the same link... but this is a huge package.. n sory 'bout my EnglishI'm not asking you to write perfect English (that is something I can't either). I simply ask you to NOT use those annoying SMS-abbreviations like 'n', 'plz', 'u'... that should be 'and', 'please', 'you'...
JDK 6 Update 6 with Java EE
...Where did I suggest you should download that version? Re-read what I posted. I already told you which is the "JDK only" download.

Where can I get a compiler?

Where can I get a compiler that I can use that is like sun's but doesnt use an IDE?

This may duplicate some of what you've already done, if so fine. But please verify you've done exactly what is written or know why you shouldn't before proceeding. You may want to print these instructions before continuing.
To download the current version of Java, go here:
http://java.sun.com/j2se/1.4.1/download.html
and click on the word DOWNLOAD in the column labeled SDK in this line:
Windows (all languages, including English)
After downloading, click on this page of installation instructions and read through #6:
http://java.sun.com/j2se/1.4.1/install-windows.html
NOTE: If you are installing on other than a standard 32-bit Windows system, go to this page
http://java.sun.com/j2se/1.4.1/install.html and choose the installation instructions for your system.
Install the software according to the preceeding instructions
Below is a Helloworld program, copy and paste it into your editor and save it as "HelloWorld.java" Use capitalization, Java is case-sensitive. If you're using Notepad, quote the name when saving, otherwise Notepad adds ".txt" to the name. Go to DOS/command window and check that you've got the file where you want it and that it's named correctly.
-------program HelloWorld.java--------
public class HelloWorld {
public static void main (String[] args) {
System.out.println("Hello World!");
In the same directory as HelloWorld.java, enter "javac" - the program should print out a list of options, if not, set your PATH - see below.
In the same directory as HelloWorld.java, enter "javac HelloWorld.java" and the javac compiler will create HelloWorld.class. If it was successful it will not give any messages. Check that the file is created.
In the same directory as HelloWorld.java, enter "java -classpath . HelloWorld" with the spaces and the period. The program will run.
Here is additional information:
The Windows path is a set of pointers that Windows uses to locate programs that you execute, like javac.exe and java.exe. This setting is explained here:
http://java.sun.com/j2se/1.4.1/install-windows.html
Scroll down to: 5. Update the PATH variable
(you should have already done this as part of the Java installation)
The CLASSPATH is another set of pointers that is used by Java to find the files that you create and want compiled and/or run. This setting is explained here:
Setting the Classpath:
http://java.sun.com/j2se/1.4.1/docs/tooldocs/windows/classpath.html
[NOTE: always start your classpath with ".;" which means the current directory. See my classpath, below]
How Classes are Found:
http://java.sun.com/j2se/1.4.1/docs/tooldocs/findingclasses.html
Examples:
This is my path
PATH=C:\WINDOWS;C:\WINDOWS\COMMAND;C:\BATCH;C:\J2SDK1.4.1\BIN;C:\PROGRA~1\UTILIT~1;C:\PROGRA~1\WIN98RK
This is my classpath
CLASSPATH=.;C:\mjava;C:\mnrx;C:\NetRexx\lib\NetRexxC.jar;C:\j2sdk1.4.1\lib\tools.jar;C:\NetRexx\NrxRedBk

Where can I get the source code of the jconsole in jdk1.5

Where can I get the source code of the jconsole in jdk1.5?

Hi,
The JConsole 5 source code is not publicly available but you can get JConsole 6/7 source code from http://openjdk.java.net.
Regards,
Luis-Miguel Alventosa - JMX/JConsole dev team - http://blogs.sun.com/lmalventosa

Where can I get more information on Cryptography Extension ??

Hi.
Does anyone know how to set up the Jarsafe product ?
Another thing is, how to set security for the Cryptography Extension ??
can anyone tell me where can i get more information on this ??
Thank you.

You need to download the JCE 1.2.1 that is available on the http://java.sun.com website. Once you download the software, you need to make the jar files available. It is easiest to place the JCE jar files in the extension mechanism folder since permission has already been granted, by default, to any code in that folder. That folder is JAVA_HOME\lib\ext on Windows. JAVA_HOME is where the Java Runtime Environment is installed.
When using JarSafe with Java Web Start, make sure that the JCE jar files are placed in the extension mechanism folder of the JRE that Java Web Start is using.

Where Can i get jaxp-1_0_1.zip

Hello all,
I am new to this XML technology.I want to parse a XML using JAXP.Where can i get this jaxp-1_0_1.zip package .Plz send to this email id [email protected]

JAXP 1.3 may be obtained from
http://java.sun.com/xml/downloads/jaxp.html

Where Can I get sun-passthrough.dll

Similar Messages

Maybe you are looking for