Where can I purchase new Mac Pro in RSA?

Use the link here to find a Reseller...
http://www.apple.com/za/buy/

Similar Messages

Where can I buy the Mac Pro 2013 motherboard? Just the motherboard

So where can I buy JUST the Mac pro 2013 motherboard? If you can, please link it.
Thanks!

This is a User-to-User help site.
Helpers get their rewards by helping.
I know some good solutions to a lot of problems with Mac Pros. And other readers know a whole lot more solutions.
I do not know of any problem that can be solved by replacing these boards in a nearly-new Mac Pro. The processor board is sold as a bare board, with no processors or heatsinks. It takes an hour of trained technician time just to install the processors and heat sinks, and you MUST get the correct parts or it will not work. If your technique is not correct, the processor(s) will self destruct when you power them up.
The mainboard does not include the SATA connectors, which are actually on a wiring harness that is attached from behind.
What problem are you trying to solve here?

About to purchase new Mac Pro - Need Advice

I am about to purchase a new mac pro and have some questions
I am planning to use final cut pro as well as Edius on Boot Camp.
I intend to edit footage in HDV from a sony Z1 and also from the new sony - pmw -ex3 which i will be planning to edit in HD and 24p.
1) the default config for the mac pro is dual 2.8.ghz processors, what advantage gain will i get i upgrade to 3.0 or 3.2, is the extra power worth the money? will this give me more real-time editing
How many layers of HD 1920 x 1080 from the sony pmw-ex3, will i be able to edit in FCP 6.0 without any problems? would you advise more ram
2) i prefer to work from RAID 5 drives and keep system drive separate, this is how i have worked on in PC/Windows environment. Can anyone confirm if i can have one JBOD drive for the system and 3 drives configured as a RAID 5 drive?
Will i be able to use a boot to run windows and also be able to use the RAID 5 drive on windows side?
3) Is anyone using the 3ware RAID 5 side car? what is experienece is this compatible on the windows partition from boot camp
4) How will i be able to preview HD footage?
5) Do i need to invest in a better Graphics
Thanks in advance

Hi,
Here are a few answers.
1. The Mac Pro 2.8 GHz model performs so well that it is difficult to justify paying 28% more for 7% of additional processor power in the case of the Mac Pro 3.0 GHz or 56% more for 14% additional processor power with the Mac Pro 3.2 GHz model. You might see a small 5-10% increase in performance when compressing video with the 3.2GHz model but it certainly would not be worth paying 50% more to me. In addition, Amazon has the 2.8 on sale for $2599 after an easy rebate:
http://www.amazon.com/exec/obidos/ASIN/B000VR4F2Q/arizomacinusergr
That is a $200 savings off the retail price.
2. If you want to use boot camp I would NOT recommend the Apple RAID card. Boot camp does not work with this card which leaves you wondering why you bought the card and how to get around this HUGE limitation. Instead, I would recommend the Areca ARC-1221x, HighPoint RR 3522 or the ARC-1680x if you want a SAS card. All of these cards have new firmware available that provide awesome performance and boot capability with the Mac Pro 2008. I would also get a SeriTek/2eEN4 4-bay and 1TB Samsung HDs. This gives a solid, quiet 4-bay enclosure that can support RAID 5 with any of the cards and you can add a second enclosure later if you want to use all eight external ports with RAID 6 (for added redundancy and increased volume size). This leaves the internal bays available for Boot Camp, Mac OS X, backups or mirrors and provides RAID 5/6 capability that can be configured to perform almost twice as fast as the Apple RAID card and provide double the redundancy with RAID 6. Links with more information are found here:
http://firmtek.stores.yahoo.net/sata2een4.html
http://www.newegg.com/Product/Product.aspx?Item=N82E16822152102
http://www.amug.org/amug-web/html/amug/reviews/articles/highpoint/3522/
http://www.amug.org/amug-web/html/amug/reviews/articles/areca/1221x/
http://www.amug.org/amug-web/html/amug/reviews/articles/areca/1680x/
3. The 3Ware RAID 5 card is not a top pick in the Macintosh market. The options outlined above will provide much better performance and RAID 6 capabilities.
4. You can view the the HD footage on the monitor.
5. You may want a better graphics card but I would try the stock card first. I was surprised how well the ATI radeon HD 2600 XT card performs with Apple applications.
Have fun!

Looking for Thunderbolt 2 RAID Array options that can match the new Mac Pro's quietness -- or at least come close!

Maybe it is too early to talk about anything beyond the Pegasus2 Series (http://www.promise.com/promotion_page/promotion_page.aspx?region=en-global&rsn=1 00) when it comes to Tunderbolt 2 storage options. Looking for something on the order of 8 to 12 usable TB of redundant storage or possibly a JBOD option of 4 bays. This is coming close but I do not think it is Thunderbolt 2 (http://www.g-technology.com/products/g-raid-thunderbolt).
Either way -- looking for users experience not only on usable Thunderbolt 2 solutions but more importantly noisiness. I want to upgrade my existing Mac Pro to one of the new ones and I have found the old one to be nearly unnoticable in a quiet desktop environment. Would love to find the same peace and quiet when migrating to the new form factor that is going to need external storage to match what I have been used to inside the old Mac Pro.

Not your quiet storage, but then I would put it in a cool closet or small room off to the side :-)
http://www.macgurus.com/store/Item/ARC8050 ( I was assuming but maybe not, that it would support RAID6 which is always preferable for larger arrays. Seems to have most features you want for 8 drives). MacGurus "Burly" are never quiet but they are rugged and well tested.
Migrating storage will be a concern. I don't like the noise from my older SATA OWC dual-drive metal enclosure though suppose to be 'acceptable' unless they have improved the fans they are out for me.
OWC for Thunderbolt products.
Helios enclosure (the new dual-slot Helios PCIe chassis)
… moving various hard drives into Thunderbolt cases
USB3 hard drive enclosure.
For those without eSATA enclosures, a simple eSATA to USB3 adapter might do the trick.
USB3 is plenty fast to house two hard drives.
OWC Mercury Elite Pro Dual.
Available now starting at about $430.
review of the OWC Mercury Elite Pro Dual.
Some upcoming new TB2 enclosures:
http://www.sonnettech.com/product/thunderbolt/index.html
http://gigaom.com/2013/12/21/the-technology-gap-between-the-old-and-new-mac-pro- could-cost-you-a-mini/

Where can I get new Macbook Pro 'feet'

I am trying to find a place that sells the rubber pads that are on the bottom of my macbook pro because one of them fell off. Does anyone know where I can find one? ...for under $20?

I went into AppleStore United Kingdom in December 2011 and was quoted over £100 to replace the whole bottom cover of MacBook Pro 2009. I was told that they can't replace the feet alone.
I went back in May 2012 and was told that they now have a part available to replace just the feet! "076-1398 MacBook Pro Foot Installation Kit, Single Pack." Each foot costs £7.00 but the two missing feet were replaced for free under Applecare support. I regret that I did not ask for all 4 feet to be replaced concurrently. Even if they weren't detached the plastic supports have got brittle over time due to heat stress. They are bound to fail soon. So make sure you get all four replaced.
If you're in DIY mode and don't have AppleCare you may want to use rubber tap washers from your hardware store. These should be stuck on with the best glue you have available. Do it on a flat surface near where the old feet were located. That way you get 100% contact rather than trying to put them over the indentations where feet are supposed to go. It won't look extremely pretty but the rubber has excellent grip and not many people are going to look at underside of computer.

I can see my new mac pro but not my pc

I have conected all my divices but can not conect my PC I have all the updated software but it sitll does not show. My apple tv in on my wireless net work and so is my PC

can the mac see the pc?
if not it sounds like the pc don't have share lib turned on

Where did everyone's new Mac Pro ship from?

Mine shipped from "BLOOMINGTON, CA". And it only took 3 days, with FedEx Ground. Interesting, I thought it's manufactured in China?

I got a shipping notice for mine this evening. Fedex says they picked it up in Fullerton, CA.
My understanding is that Apple routinely does the CTO/BTO final configurations in the USA.
Regards,
George

User Upgradability on the new Mac Pro?

I understand that one can configure the new Mac Pro from around $3,000 to almost $10,000. But can one buy the base unit and then upgrade parts later on? For example, RAM upgrade, CPU upgrade, graphic card upgrade, etc.
Is the Mac Pro as quiet as a Mac Mini?

The tear-down images and data on the Xeon E5-xxxxV2 series processors look like the cpu can be upgraded by the user. All E5 processors use the FCLGA - 2011 socket, same pin-out so should be replaceable:
1620V2 - 4 core - 3.7 GHZ - $294
1650V2 - 6 core - 3.5 GHz - $583
1680V2 - 8 core - 3.0 GHz - $1723
2697V2 - 12 core - 2.7 GHz - $2618
Interesting tidbit - the max addressable memory for the 4, 6, 8 core models is 256 GB, while that of the 12 core is 768 GB.

Hello, I purchased Adobe as a download a few years ago and installed in on a Mac Pro. I would like to uninstall it on that mac and install it on a new Mac Pro. Any idea how I can do that?

Hello, I purchased Adobe as a download a few years ago and installed in on a Mac Pro. I would like to uninstall it on that mac and install it on a new Mac Pro. Any idea how I can do that?

Just download, install, and activate using your serial number. You are allowed to have the software installed and activated on two machines. If you do not wish to retain the original installation as a backup you can deactivate it by opening one of the programs and choosing Help -> Deactivate.
Here is a general link for where you can find download links...
Download and Installation Help -
https://helpx.adobe.com/download-install.html
If you would like a more direct link you will need to name the software and the version.
If you need your serial number you should be able to find it in your Adobe account online if you registered the software when you first installed it.

I brought Pages, and it showed in the purchase history. But in my new Mac pro, It needs me to buy again. I register already, it didn't show "downloadable". How can I do?

I brought Pages, and it showed in the purchase history. But in my new Mac pro, It needs me to buy again. I register already, it didn't show "downloadable". How can I do?

Sorry, I bought the Pages App in March. Now I can't download.

Recently purchased used Mac Pro, where can I find year/build etc. info?

Recently purchased used Mac Pro, where can I find year/build etc. info?

EZ-under the Apple, then About this Mac, then "More info" . If you check somewhere on your mac you may find a serial number, but the first way works the best, I've found
JB

Can I add both a HD 2600 XT and 8800 GT to a new Mac Pro

I just purchased the new Mac Pro and got the base config. with the HD 2600 XT. The way my setup works is I need to use this Mac Pro with 3 monitors, all within close areas within the office. We will have a wireless/bluetooth keyboard/mouse and since it's within 15 ft. we don't expect to have problems. With the monitors we will have to run DVI Cables around doors so it should be more like 20-22 ft. I was going to purchase a DVI splitter such as the one from Monoprice.com but figured my best solution is to add a video card. These monitors need to be mirrored but won't have to all display at the same time.
I came to the conclusion it's almost as good to just add a 2nd video card. I am considering the 8800 GT but am wondering, if I have a system with both the 2600 XT and 8800 GT will it cause problems? To be safe am I better off just getting another 2600 XT? If so, where can I purchase it? I can find the 8800 GT on Apple's site but can't find the 2600 XT anywhere. I don't do much gaming other than X-Plane but do some Adobe CS3 work in Photoshop, Illustrator, and inDesign, some HD video in Final Cut Studio, and other than that basic office work in iWork, Office, and mail, ical, and safari web browsing.

When I called Apple they told me that I wouldn't be able to use my current 2600 with the 8800 (if it ever gets here). They said I could use two 8800's or multiple 2600's but not an 8800 and 2600 together. I may give it a try anyways because I'd like to run 3 monitors.
If I were you I think I'd just get one of the 2600's that are likely to start showing up on E-bay when people start to finally get their 8800's. That is if you can wait until March.
Best of luck.

I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

Well, I really would love the new unreleased mac pro however , I'm not sure of the expected cost , Everyone speculates from $3,000 to $8,000, in which I may have to wait a while to purchase.
To the point .... I want fully functional thunderbolt ports to be on the current mac pro's .... wonder if anyone had workarounds yet?... or could I chain the the current mac pro to a mac mini to make that happen?

HT1727 i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?

i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?

If you bought them on your iPad then you will need to connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over to the Tones part of your computer's iTunes library and you can then sync them to your iPhone - ringtones are a one-time only download, so you won't be able to redownload them directly on your phone.

Where can I purchase new Mac Pro in RSA?

Similar Messages

Maybe you are looking for