WHERE CAN I PUT MY INVOICES WHEN I AM FINISHED CREATING AND WANT TO USE THEM?

I am creating Invoices for work.I have twelve clients and I have created a invoice I like. Where do I put these to use every month and how do I do that?

Tara,
Numbers has a Custom Template function. Create a document that you would like to reuse, and then File > Save as Template...
From then on, when you want to start at that point with a new document you do a File > New... and navigate to the My Templates area at the bottom of the Template Chooser where you can click on the one you created.
If you ever want to modify that template, just do it and then File > Save as Template... again, using the identical file name.
Jerry

Similar Messages

I've bought headphones for iphone 4g and want to use them in my ipod 4g. When i want to use pilot it don"t work. What should i do ?

I've bought headphones for iphone 4g and want to use them in my ipod 4g. When i want to use pilot it don"t work. What should i do ?

If you have an Apple store nearby you can make an appointment at their Genius Bar.
Apple Retail Store - Genius Bar
You can also try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device

HT4060 I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual

I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual. The other day, I had charged my iPad overnight so that I could take it to university with me for the day, and when I had switched it on the next day the battery was on 5% and I had not used it since charge.

Your battery may be dying. THey are only good for so many charges/discharges. If you have an apple store near by make an appointment and have them check itout

Where do mail rules live in finder? I lost all and want to retrieve them rather than re invent

Where do mail rules live in finder?

Mail rules are stored in iCloud if you use iCloud.
They're in ~/Library/Mobile Documents/com~apple~mail/Data/MailData/SyncedRules.plist.
Note you should be VERY careful about modifying anything under Mobile Documents as it's iCloud and changes/errors/deletions you make will be instantly synched to all your devices.

TS4002 I'm trying to create a new apple-id but when typing the email adress I want to use I'm told that the particular email adress is not allowed but when searching I can't find same being used. How do I find out where that particular email adress is use

I'm trying to create a new apple-id but when typing the email adress I want to use I'm told that the particular email adress is not allowed When searching I can't find same being used anywhere. How do I find out where that particular email adress is used so I can delete it there and use it for my new apple-id?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Also
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.

HT1498 where can I find a receipt when renting a movie through apple tv

where can I find a receipt when renting a movie through apple tv

On the Movies app, or in any installation of iTunes on a computer (signed in with an AppleID).

Where can I find the date when the pre-sale movies will be released?

Where can I find the date when the pre-sale movies will be released?

Hi Claudia1950,
Thanks for visiting Apple Support Communities.
According to the following article on iTunes Store pre-orders, "Most pre-orders will show an expected release date near or below the pre-order button."
You may also find this information helpful:
When a pre-ordered item becomes available, you will receive an email letting you know that you can download your pre-order.
iTunes Store: About pre-orders
http://support.apple.com/kb/ht5714
Best Regards,
Jeremy

Where can I find the invoices for 2014?

My account only lists the invoices for January and February 2015.
So where can I find the invoices for 2014? I urgendly need the invoice for 12/2014.
And just to make it clear: there is no button saying "Archive", "Show all" or anything like that.
regards
Oliver Schroth

Hallo Oliver (ich antworte auf Deutsch, ok?)
meine Rechnungen finde ich, wenn ich so vorgehe: adobe.com >>> https://accounts.adobe.com/ >>> https://accounts.adobe.com/account >>>
https://accounts.adobe.com/plans/hier erscheint Deine Nummer >>> Abos & Produkte >>> Details zum Abo >>> Rechnungsverlauf.
Üblicherweise reicht es eigentlich nur den letzten Link aufzurufen, aber die Infos von "unterwegs" sind vielleicht auch ganz interessant.
Hans-Günter

Where can I get a bluttooth driver for my ipad minm and windows 7

Where can I get a bluetooth driver for my ipad mini and windows 7? Windows see and know the device but the ipad doesn't see win7. In troubleshooting, win7 say it doesn't have a driver??

Mac 101: Printing (OS X Lion)
Important:
Your OS X Lion system will either have the necessary printing software already installed, or it will automatically download and install software when the printer is connected or configured. Do not install software that came with the printer as it may be out of date, and do not connect the printer to your Mac yet. Follow the instructions that came with the printer to unpack, install ink or toner, and insert paper. Finally, use the instructions in this article to connect the printer to your Mac.
The procedures are identical for Mountain Lion.

I can't open my phone when i just finish update to ios7.0.3

i can't open my phone when i just finish update to ios7.0.3
it's always show me "connect to iTunes"
I try to restore I phone to factory setting, then restore backup, but it's useless:
and I try to restore from iCloud Backup, but it was the same
I want to know about that, how can I open my phone and have all data back?
Cause the data for me is very important.
thank a lot.

Alright; first thing we need to confirm is do a full restore, and see if you get any kind of error message. During the set up assistant you then want to see if you have any backups in iTunes/iCloud by using this article to see where they are located
http://support.apple.com/kb/HT1766?viewlocale=en_US
For iTunes
To verify that the backup finished successfully, open iTunes Preferences and select the Devices tab. The name of the device will appear along with the date and time the backup was created.

I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the "double click" defult to o

I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the default to open an image with a double click in 4?

You can associate files from the Bridge level and the Desktop level.
In Bridge CS4, go to Preferences > File Type Associations and change it to Photoshop CS4 for the file types you want.
If you want to open files from the Windows Desktop in CS4, these are the instructions:
Do this from the Windows Desktop:
If you want your image file to open in Photoshop and it doesn't, right click on it and choose
Open with > Choose default program… select Photoshop CS4 or CS6 and checkmark "always use the selected program to open this type of file".

Can I put my library on an external hard drive and use it between two computers?

Can I put my library on an external hard drive and use it between two computers? I have two MBP; I will refer to one as computer A and to the other as computer B. I would like to be able to plug in my external hard drive, boot up iTunes, and if there were any changes made to the library previous to its last time accessed on this compluter, they show up on that computer, regardless of being imported on the other.
A hypothetical example: I import three albums called 1, 2, and 3 on computer A over a week or so. I take the external hard drive and plug it into computer B. The entire library which was visible on A, is visible on B, including albums 1, 2, and 3.
Is this possible? If so, what files need to be copied onto the external? I'm trying some different combinations, trial and error basically. Hopefully someone knows and can answer before I mess up my library. I also want to do this to free up space on my computer. All importing will be done from disc.

iTunes/Preferences/Advanced : point your iTunes to the new location of the Library.
Set "Share on local network" in the Sharing tab, and you or everyone on the local network can play your music.
You make a backup first of the Library.
Move the follwing to the new location:
/Users/your username/Music/iTunes/iTunes Music
have fun.

Can I put a SQL query into a bind variable and then use it to output report

Hi,
Can I put a SQL query into a bind variable and then use it to output report?
I want to create a report and an item "text area" (say P1_TEXT) which can let user to input a SQL query(they are all technical users and knows SQL very well). Then, I use a bind variable (that text area) to store the SQL statement. Then, I add a submit button and I want to use the following to output the report:
select * from (:P1_TEXT);
Do you think it is possible to do that? Any known limitations for APEX in this area?
Thanks a lot,
Angela

You can, but make sure it's what you really want to do. Make sure you are VERY familiar with SQL Injection. Most people who know what it is, go out of their way to prevent SQL Injection. You're going out of your way to allow it.
You can try using &P1_TEXT. instead of bind variable syntax. Bind variables are one of the best ways to prevent SQL Injection, which is why it's not working for you.
Once again, I strongly urge you to consider the implications of your app, but this suggestion should get it working.
Tyler

I have problems with my films that become slightly jerky after I have imported and edited them in iMovie and then burned them onto a DVD using iDVD. I can see the weak jerkiness when panning in both laterally and vertically. I shoot with a camcorder Canon

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

Where can i buy iphone 6 plus tampered glass screen protector and waterproof casing

where can i buy iphone 6 plus tampered glass screen protector and waterproof casing. how much is it and where can i get it.FROM SINGAPORE

If you take a look at the Lifeproof fre and it's features, I don't think you should need a tempered glass screen. I have found this case to be so perfect that the touch ID works better than it did directly on the iPhone 6 Gorilla Glass.

WHERE CAN I PUT MY INVOICES WHEN I AM FINISHED CREATING AND WANT TO USE THEM?

Similar Messages

Maybe you are looking for