Where can I read the task description?
Hello,
when I synchronize 6.86.9.3 with outlook and have a look in the protocol, I see that the description of a task ("Aufgabe" in German version) will transferred to and from my mobile.
But where can I read the description in the phone? I didn't find any menu entry wich does show me it.
Regards,
Kurt
Hi
Which handset you are using? Have you checked this ( for example if it is today) you can check the same in calender or have checked in any notes on your phone ( Menu - Office - Notes) .... I am not sure is it the same u r expecting ? No clues w/o phone model ?
Similar Messages
-
Where can I read the description?
Hello,
when I synchronize a E61 with 6.86.9.3 with outlook and have a look in the Synch protocol, I see that the description of a task ("Aufgabe" in German version) will transferred to and from my mobile.
But where can I read the description in the phone? I didn't find any menu entry wich does show me it.
Regards,
KurtHi
Which handset you are using? Have you checked this ( for example if it is today) you can check the same in calender or have checked in any notes on your phone ( Menu - Office - Notes) .... I am not sure is it the same u r expecting ? No clues w/o phone model ? -
I would like to set my system network proxy settings to those, Firefox chose. Firefox is configured to use "Auto-detect proxy settings for this network" and this works fine. How can I read out the settings Firefox chose, so I can adapt these system?
Hello Richard,
Download MozBackup and make a backup of your bookmarks and passwords. Uninstall firefox and remove ALL folders with the name "Firefox".
Install Firefox and restore your bookmarks and passwords. Now you should have a fresh install so you have to make all settings again. -
Where can i find the Adobe Reader Reference Help File in french...?
Where can i find the Adobe Reader Reference Help File in french...?
Hi JackTatSykes
Download the reader X MSI from the below link : ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.0.0/en_US/
Reader XI : ftp://ftp.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/ -
Help required please. "Itunes can not read the contents of my iphone"
Greetings all,
I know this question has been asked before and I apologize for asking again but all the solutions provided don't seam to work for me, can anyone help me please.
I am receving the message: "Itunes can not read the contents of the iPhone. Go to the summary tab In iPhone Preferences and click restore torestore this Iphone to factory settings".
Now a little about my iphone, Itunes and my laptop and what steps i havealready tried.
I have an iPhone 4 running software 5.0
My itunes version is 10.5.0.142
I know these are not the most up to date versions but I have had this issue for almost 3 months now and updating the software back then was the first step I tried. I don’t believe updating to the latest will fix this issue as updating the last two times did nothing.
Every so often after starting Itunes, The program will stop responding and will require the three finger death kill (CTRL, ALT, DELETE) to open task manager to end the task of Itunes. Once it shuts down, I restart the iTunes and it runs smoothly, apart from not reading my iPhone.
When I run a diagnostic in itunes under the help tab, I get these fail messages:
Network Connectivity test: Secure link to Itunes store fail
Device connectivity test: Under support services: Itunes helper is not running. And under ports: No iPod, iPhone or iPad found.
Device Sync test: No iPod touch, iPhone or iPad found.
*See below for full diagnostic report*
I have restored back to factory settings twice.
I have shut down and restarted both my iPhone and laptop.
I am running Windows 7 32-bit on my laptop.
I am using ZoneAlarm as my fire wall, and have been disabling it when syncing my iPhone to prevent other error messages.
The iPhone is plugged into a genuine Iphone USB cable and is plugged into a USB port not a USB hub on my laptop, I have tried plugging it into all 4 USB ports and this issue still persist. The Cable is less then 5 months old, is not frayed or damaged in any way, have also borrowed 2 other cables from friends and still the same issue.
The iPhone does not even come up in windows explorer as a digital camera.
The iPhone is NOT jailbroken
I do not live close to a so called genius bar, however I have made the journey to them on 3 separate occasions last year when I first received my iPhone for a different issue, the so called genius's could not fix the problem so they just gave me a new (refurbished) iPhone, which did not extend my warranty. I will not be taking the iPhone back to them as I believe they can not resolve many issues, this is why I am reaching out to the power of the people in the wider apple community.
I have read in other forums about ifunbox and other programs for jail broken iPhones to isolate folders “iTunesDB” and "iTunesCDB" and delete them. If this is the issue is there a way to access these files through windows explorer as my iphone is not jailbroken.
I hope I have provided enough information and someone can help me fix this issue. If I have left anything out, please let me know. I thank everyone in advance for your patience and support.
Thanks
Hoggie27
FULL DIAGNOSITC REPORT
Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 001BAD14XXXXEA78
Current user is an administrator.
The current local date and time is 2011-11-16 10:04:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 230M
**** External Plug-ins Information ****
No external plug-ins installed.
The drive H: Vodafone USB SCSI CD-ROM Rev USB is a USB 1 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {97524DB0-B9DC-41DB-8AFA-0CE6938F7C95}
Description: PC
IP Address: (HAS BEEN REMOVED FOR PERSONAL REASONS)
Subnet Mask: 255.255.255.255
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 11:00:00 1970
Lease Expires: Thu Jan 01 11:00:00 1970
DNS Servers: 10.143.147.147
10.143.147.148
Adapter Name: {BFF0456E-DE42-4FEF-B1FA-1EA1C5EDEE42}
Description: Vodafone Mobile Broadband Network Adapter (ZTE)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 11:00:00 1970
Lease Expires: Thu Jan 01 11:00:00 1970
DNS Servers:
Adapter Name: {D5511FFD-0CA8-4F62-B3CA-E90384FFCD03}
Description: Broadcom 43225 802.11b/g/n
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 11:00:00 1970
Lease Expires: Thu Jan 01 11:00:00 1970
DNS Servers:
Active Connection: PC
Connected: Yes
Online: Yes
Using Modem: Yes
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
ZoneAlarm Firewall is installed.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-16 09:59:57.
**** CD/DVD Drive Tests ****
LowerFilters: Afc (1.0.0.2),
UpperFilters: GEARAspiWDM (2.2.0.1),
F: hp CDDVDW TS-L633N, Rev 0300
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.5.0.142 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPhone 4 (GSM) running firmware version 5.0
Serial Number: 85107XQLA4S
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
< Edited By Host >Hi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again -
Where do I see the errors descriptions????
First I deploy a Mapping in the Deployment Manager (all its OK) and then I execute it.
The mapping collects data from a table and put it in a flat file.
In the Execution results I see in the Summary:
Completion Status Completed with errors.
Row Activity
Mapping1 Inserted 0, Updated 0, Deleted 0, Merged 0.
Where do I see the errors descriptions????Claudio,
You can use the runtime audit browser to see the descriptions:
From the program menu, Warehouse Builder:
- invoke Start OWB OC4J instance
- invoke OWB Runtime Audit browser
- connect to your runtime repository, using the access user credentials, and click 'view execution report'
- drill down to the details of the execution
Hope this helps,
Mark. -
Where can we find the methods of the classes in OLE Interface
Hi All,
I am developing the code to download the file into multiple sheets of excel file.
got many links and sample codes from this forum.
but my doubt is where can we find the methods in applications.
Example:
add, cells, range etc are the methods in the object excel.application.
I want to find all other methods in this same object.
Please help me.
thanks in adv.
EswarHE,
see this demo program which is in DWDM
*& Report DEMOEXCELINTEGRATION *
INCLUDE rdemoexcelintegrationtop.
DATA: control TYPE REF TO i_oi_ole_container_control.
DATA: container TYPE REF TO cl_gui_custom_container.
DATA: link_server TYPE REF TO i_oi_link_server.
DATA: table_coll TYPE REF TO i_oi_table_collection.
DATA: retcode TYPE t_oi_ret_string,
document_type TYPE soi_document_type
VALUE soi_doctype_excel_chart,
document_format TYPE soi_document_type.
DATA: doc_url TYPE t_url.
DATA: usa_sales TYPE i VALUE 1000,
europe_sales TYPE i VALUE 2000,
japan_sales TYPE i VALUE 1000,
asia_sales TYPE i VALUE 100,
america_sales TYPE i VALUE 100,
africa_sales TYPE i VALUE 100.
DATA: total_sales TYPE i VALUE 0.
DATA: BEGIN OF test_line, region(50), sales TYPE i, END OF test_line.
DATA: test_table LIKE TABLE OF test_line.
DATA: wa_test_table LIKE test_line.
CLASS c_excel_document DEFINITION
CLASS c_excel_document DEFINITION.
PUBLIC SECTION.
DATA: proxy TYPE REF TO i_oi_document_proxy.
DATA: document_type TYPE soi_document_type.
DATA: data_table TYPE sbdst_content,
data_size TYPE i,
doc_url TYPE t_url.
METHODS: constructor
IMPORTING control TYPE REF TO i_oi_ole_container_control
document_type TYPE soi_document_type.
METHODS: on_close_document
FOR EVENT on_close_document OF i_oi_document_proxy
IMPORTING document_proxy has_changed.
METHODS: on_custom_event
FOR EVENT on_custom_event OF i_oi_document_proxy
IMPORTING document_proxy event_name param_count
param1 param2 param3.
METHODS: create_document
IMPORTING open_inplace TYPE c DEFAULT ' '
EXPORTING retcode TYPE t_oi_ret_string.
METHODS: open_document
IMPORTING open_inplace TYPE c DEFAULT ' '
open_readonly TYPE c DEFAULT ' '
EXPORTING retcode TYPE t_oi_ret_string.
METHODS: open_document_url
IMPORTING open_inplace TYPE c DEFAULT ' '
open_readonly TYPE c DEFAULT ' '
doc_url TYPE t_url DEFAULT ' '
EXPORTING retcode TYPE t_oi_ret_string.
METHODS: retrieve_document
IMPORTING documents TYPE document_list
EXPORTING document_format TYPE soi_document_type
doc_url TYPE t_url.
METHODS: close_document
IMPORTING do_save TYPE c DEFAULT ' '
RETURNING value(retcode) TYPE t_oi_ret_string.
PRIVATE SECTION.
DATA: control TYPE REF TO i_oi_ole_container_control.
ENDCLASS.
DATA: l_fcode LIKE fcode.
DATA: document TYPE REF TO c_excel_document.
DATA: bds_instance TYPE REF TO cl_bds_document_set.
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
SET PF-STATUS 'MAIN0100'.
SET TITLEBAR '001'.
retcode = c_oi_errors=>ret_ok.
IF control IS INITIAL.
DATA: b_has_activex.
CALL FUNCTION 'GUI_HAS_ACTIVEX'
IMPORTING
return = b_has_activex.
IF b_has_activex IS INITIAL. MESSAGE e007. ENDIF.
CALL METHOD c_oi_ole_control_creator=>get_ole_container_control
IMPORTING control = control
retcode = retcode.
CALL METHOD c_oi_errors=>show_message
EXPORTING type = 'E'.
CREATE OBJECT container
EXPORTING container_name = 'CONTAINER'.
CALL METHOD control->init_control
EXPORTING r3_application_name =
'Demo' "#EC NOTEXT
inplace_enabled = 'X'
inplace_scroll_documents = 'X'
parent = container
register_on_close_event = 'X'
register_on_custom_event = 'X'
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message
EXPORTING type = 'E'.
CALL METHOD control->get_link_server
IMPORTING link_server = link_server
retcode = retcode.
CALL METHOD c_oi_errors=>show_message
EXPORTING type = 'E'.
CALL METHOD link_server->start_link_server
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message
EXPORTING type = 'E'.
CALL METHOD control->get_table_collection
IMPORTING table_collection = table_coll
retcode = retcode.
PERFORM refresh_sales.
CREATE OBJECT document
EXPORTING control = control
document_type = document_type.
CALL METHOD table_coll->add_table
EXPORTING table_name = 'SALES_IN'
table_type = table_coll->table_type_input
IMPORTING retcode = retcode
CHANGING data_table = test_table.
ENDIF.
IF bds_instance IS INITIAL.
CREATE OBJECT bds_instance.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
l_fcode = fcode.
CLEAR fcode.
CALL METHOD cl_gui_cfw=>dispatch.
CASE l_fcode.
WHEN 'EXIT'. "Zurück
IF NOT document IS INITIAL.
CALL METHOD document->close_document.
FREE document.
ENDIF.
IF NOT link_server IS INITIAL.
CALL METHOD link_server->stop_link_server
IMPORTING retcode = retcode.
FREE link_server.
ENDIF.
IF NOT table_coll IS INITIAL.
FREE table_coll.
ENDIF.
IF NOT control IS INITIAL.
CALL METHOD control->destroy_control
IMPORTING retcode = retcode.
FREE control.
ENDIF.
IF NOT bds_instance IS INITIAL.
FREE bds_instance.
ENDIF.
LEAVE TO SCREEN 0.
WHEN 'CREATE'.
IF NOT control IS INITIAL.
document->data_size = 0.
CLEAR document->data_table.
CALL METHOD document->create_document.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ENDIF.
WHEN 'SELECT'.
IF NOT control IS INITIAL.
DATA: documents TYPE document_list.
DATA: descr TYPE document_descr.
CLEAR documents.
descr-document_name = 'Car Sales Chart'(do1).
descr-document_id = 'DEMOEXCELCHART1'.
APPEND descr TO documents.
descr-document_name = 'Car Sales Chart 2'(do3).
descr-document_id = 'DEMOEXCELCHART2'.
APPEND descr TO documents.
descr-document_name = 'Car Sales Sheet'(do2).
descr-document_id = 'DEMOEXCELSHEET1'.
APPEND descr TO documents.
CLEAR doc_url.
CALL METHOD document->retrieve_document
EXPORTING documents = documents
IMPORTING document_format = document_format
doc_url = doc_url.
IF NOT doc_url IS INITIAL.
CALL METHOD document->close_document.
CALL METHOD document->open_document_url
EXPORTING open_inplace = 'X'
doc_url = doc_url
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ELSE.
MESSAGE e010.
ENDIF.
ENDIF.
WHEN 'OPEN'.
IF document->data_size NE 0.
IF NOT control IS INITIAL.
CALL METHOD document->open_document
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ENDIF.
ELSE.
MESSAGE e005.
ENDIF.
WHEN 'INPLACE'.
IF document->data_size NE 0.
IF NOT control IS INITIAL.
CALL METHOD document->open_document
EXPORTING open_inplace = 'X'
open_readonly = 'X'
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ENDIF.
ELSE.
MESSAGE e005.
ENDIF.
WHEN 'SAVEAS'.
IF NOT document IS INITIAL AND NOT document->proxy IS INITIAL.
CALL METHOD document->proxy->save_as
EXPORTING prompt_user = 'X'
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ELSE.
MESSAGE e000.
ENDIF.
WHEN 'CLOSE'.
IF NOT document IS INITIAL.
CALL METHOD document->close_document
EXPORTING do_save = 'X'.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ELSE.
MESSAGE e000.
ENDIF.
WHEN 'COPYLINK'.
IF NOT link_server IS INITIAL.
PERFORM refresh_sales.
CALL METHOD link_server->execute_copy_link_dialog
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ELSE.
MESSAGE e004.
ENDIF.
WHEN 'REFRESH'.
IF NOT link_server IS INITIAL.
PERFORM refresh_sales.
ELSE.
MESSAGE e004.
ENDIF.
IF NOT document IS INITIAL AND NOT document->proxy IS INITIAL.
CALL METHOD document->proxy->execute_macro
EXPORTING macro_string = 'R3StartupMacro'
param_count = 1
param1 = 10
IMPORTING retcode = retcode.
CHANGING retvalue = usa_sales.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ELSE.
MESSAGE e000.
ENDIF.
WHEN 'PRINT'.
IF NOT document IS INITIAL AND NOT document->proxy IS INITIAL.
CALL METHOD document->proxy->print_document
EXPORTING prompt_user = 'X'
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ELSE.
MESSAGE e000.
ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
CLASS c_excel_document IMPLEMENTATION.
CLASS c_excel_document IMPLEMENTATION.
METHOD: constructor.
IMPORTING control TYPE REF TO i_oi_ole_container_control
document_type TYPE soi_document_type
me->control = control.
me->document_type = document_type.
ENDMETHOD.
METHOD create_document.
IMPORTING open_inplace TYPE c DEFAULT ' '
RETURNING value(retcode) TYPE t_oi_ret_string.
IF NOT proxy IS INITIAL.
CALL METHOD me->close_document.
ENDIF.
CALL METHOD control->get_document_proxy
EXPORTING document_type = document_type
IMPORTING document_proxy = proxy
retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
CALL METHOD proxy->create_document
EXPORTING create_view_data = 'X'
open_inplace = open_inplace
IMPORTING retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
SET HANDLER me->on_close_document FOR proxy.
SET HANDLER me->on_custom_event FOR proxy.
ENDMETHOD.
METHOD open_document.
IMPORTING open_inplace TYPE c DEFAULT ' '
open_readonly TYPE c DEFAULT ' '
RETURNING value(retcode) TYPE t_oi_ret_string.
IF NOT proxy IS INITIAL.
CALL METHOD me->close_document.
ENDIF.
CALL METHOD control->get_document_proxy
EXPORTING document_type = document_type
IMPORTING document_proxy = proxy
retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
CALL METHOD proxy->open_document_from_table
EXPORTING document_table = data_table
document_size = data_size
open_inplace = open_inplace
open_readonly = open_readonly
IMPORTING retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
SET HANDLER me->on_close_document FOR proxy.
SET HANDLER me->on_custom_event FOR proxy.
CALL METHOD proxy->update_document_links
EXPORTING update_manual_links = 'X'
IMPORTING retcode = retcode.
ENDMETHOD.
METHOD close_document.
IMPORTING do_save TYPE c DEFAULT ' '
RETURNING value(retcode) TYPE t_oi_ret_string.
DATA: is_closed TYPE i, has_changed TYPE i.
DATA: doc_url(256).
IF NOT proxy IS INITIAL.
CALL METHOD proxy->is_destroyed IMPORTING ret_value = is_closed.
IF is_closed IS INITIAL.
CALL METHOD proxy->close_document
EXPORTING do_save = do_save
IMPORTING has_changed = has_changed
retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
ENDIF.
IF NOT has_changed IS INITIAL.
CALL METHOD proxy->save_document_to_table
IMPORTING retcode = retcode
CHANGING document_table = data_table
document_size = data_size.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
ENDIF.
CALL METHOD proxy->release_document
IMPORTING retcode = retcode.
SET HANDLER me->on_close_document FOR proxy ACTIVATION ' '.
SET HANDLER me->on_custom_event FOR proxy ACTIVATION ' '.
ELSE.
retcode = c_oi_errors=>ret_document_not_open.
ENDIF.
ENDMETHOD.
METHOD open_document_url.
IMPORTING open_inplace TYPE c DEFAULT ' '
open_readonly TYPE c DEFAULT ' '
doc_url TYPE t_url DEFAULT ' '
RETURNING value(retcode) TYPE t_oi_ret_string.
IF NOT proxy IS INITIAL.
CALL METHOD me->close_document.
ENDIF.
CALL METHOD control->get_document_proxy
EXPORTING document_type = document_type
IMPORTING document_proxy = proxy
retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
me->doc_url = doc_url.
CALL METHOD proxy->open_document
EXPORTING document_url = doc_url
open_inplace = open_inplace
open_readonly = open_readonly
IMPORTING retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
Document shall also be available in ITAB for respective operations:
CALL METHOD proxy->save_document_to_table
IMPORTING retcode = retcode
CHANGING document_table = data_table
document_size = data_size.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
SET HANDLER me->on_close_document FOR proxy.
SET HANDLER me->on_custom_event FOR proxy.
CALL METHOD proxy->update_document_links
EXPORTING update_manual_links = 'X'
IMPORTING retcode = retcode.
ENDMETHOD.
METHOD retrieve_document.
importing documents type document_list
exporting document_format type soi_document_format
doc_url type t_url.
*----BDS-Data-Structures:--
Tables and WAs:
DATA: doc_signature TYPE sbdst_signature,
wa_doc_signature LIKE LINE OF doc_signature,
doc_components TYPE sbdst_components,
wa_doc_components LIKE LINE OF doc_components,
doc_properties TYPE sbdst_properties,
wa_doc_properties LIKE LINE OF doc_properties,
doc_uris TYPE sbdst_uri,
wa_doc_uris LIKE LINE OF doc_uris.
ID's:
DATA: doc_classname TYPE sbdst_classname VALUE 'SOFFICEINTEGRATION',
doc_classtype TYPE sbdst_classtype VALUE 'OT',
doc_object_key TYPE sbdst_object_key VALUE 'SOFFICEINTEGRATION',
doc_mimetype TYPE bapicompon-mimetype.
DATA: field_desc TYPE TABLE OF rsvbfidesc.
DATA: wa_field_desc TYPE rsvbfidesc.
DATA: l_nr LIKE sy-tabix.
CLEAR: field_desc, wa_field_desc.
wa_field_desc-fieldnum = 1.
wa_field_desc-display = 'X'.
APPEND wa_field_desc TO field_desc.
l_nr = 0.
CALL FUNCTION 'RS_VALUES_BOX'
EXPORTING
left_upper_col = 5
left_upper_row = 5
pagesize = 10
title = 'Select document'(sdc)
IMPORTING
linenumber = l_nr
TABLES
field_desc = field_desc
value_tab = documents
EXCEPTIONS
OTHERS = 1.
IF sy-subrc EQ 0 AND l_nr NE 0.
READ TABLE documents INDEX l_nr INTO descr.
IF sy-subrc EQ 0.
CLEAR: wa_doc_signature, wa_doc_components, wa_doc_uris.
CLEAR: doc_signature, doc_components, doc_uris.
wa_doc_signature-prop_name = 'DESCRIPTION'.
wa_doc_signature-prop_value = descr-document_id.
APPEND wa_doc_signature TO doc_signature.
CALL METHOD bds_instance->get_info
EXPORTING classname = doc_classname
classtype = doc_classtype
object_key = doc_object_key
CHANGING components = doc_components
signature = doc_signature
EXCEPTIONS nothing_found = 1
error_kpro = 2
internal_error = 3
parameter_error = 4
not_authorized = 5
not_allowed = 6.
IF sy-subrc NE 0 AND sy-subrc NE 1.
MESSAGE e016.
ENDIF.
IF sy-subrc = 1.
MESSAGE e017.
ENDIF.
CALL METHOD bds_instance->get_with_url
EXPORTING classname = doc_classname
classtype = doc_classtype
object_key = doc_object_key
CHANGING uris = doc_uris
signature = doc_signature
EXCEPTIONS nothing_found = 1
error_kpro = 2
internal_error = 3
parameter_error = 4
not_authorized = 5
not_allowed = 6.
IF sy-subrc NE 0 AND sy-subrc NE 1.
MESSAGE e016.
ENDIF.
IF sy-subrc = 1.
MESSAGE e017.
ENDIF.
READ TABLE doc_components INTO wa_doc_components INDEX 1.
READ TABLE doc_uris INTO wa_doc_uris INDEX 1.
doc_mimetype = wa_doc_components-mimetype.
doc_url = wa_doc_uris-uri.
CASE doc_mimetype.
WHEN 'application/x-rtf' OR 'text/rtf'.
document_format = soi_docformat_rtf.
WHEN 'application/x-oleobject'.
document_format = soi_docformat_compound.
WHEN 'text/plain'.
document_format = soi_docformat_text.
WHEN OTHERS.
document_format = soi_docformat_native.
ENDCASE.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD on_close_document.
FOR EVENT on_close_document OF c_oi_ole_container_control
IMPORTING document_proxy has_changed.
DATA: answer, do_save.
IF has_changed EQ 1.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
titlebar = 'Office Integration Demo'(oid)
text_question = 'Save Document?'(sav)
display_cancel_button = ' '
IMPORTING
answer = answer.
IF answer EQ '1'.
do_save = 'X'.
ELSE.
do_save = ' '.
ENDIF.
CALL METHOD me->close_document
EXPORTING do_save = do_save.
CALL METHOD c_oi_errors=>show_message
EXPORTING type = 'E'.
ENDIF.
ENDMETHOD.
METHOD on_custom_event.
FOR EVENT on_custom_event OF i_oi_document_proxy
IMPORTING document_proxy event_name param_count
param1 param2 param3.
IF event_name EQ 'ON_SERIES_CHANGE'.
CALL METHOD table_coll->get_table
EXPORTING table_name = 'SALES_IN'
IMPORTING retcode = retcode
CHANGING data_table = test_table.
CALL METHOD c_oi_errors=>show_message
EXPORTING type = 'E'.
CLEAR wa_test_table.
READ TABLE test_table INTO wa_test_table INDEX 1.
usa_sales = wa_test_table-sales.
CLEAR wa_test_table.
READ TABLE test_table INTO wa_test_table INDEX 2.
europe_sales = wa_test_table-sales.
CLEAR wa_test_table.
READ TABLE test_table INTO wa_test_table INDEX 3.
japan_sales = wa_test_table-sales.
CLEAR wa_test_table.
READ TABLE test_table INTO wa_test_table INDEX 4.
asia_sales = wa_test_table-sales.
CLEAR wa_test_table.
READ TABLE test_table INTO wa_test_table INDEX 5.
america_sales = wa_test_table-sales.
CLEAR wa_test_table.
READ TABLE test_table INTO wa_test_table INDEX 6.
africa_sales = wa_test_table-sales.
CLEAR wa_test_table.
ENDIF.
CALL METHOD control->set_focus.
ENDMETHOD.
ENDCLASS.
FORM refresh_sales.
FORM refresh_sales.
DATA: BEGIN OF item_line,
region(60),
sales TYPE i,
date TYPE d,
time TYPE t,
weight TYPE f,
amount TYPE p DECIMALS 3,
id(10) TYPE n,
END OF item_line.
DATA: sales_table LIKE TABLE OF item_line.
DATA: wa_sales_table LIKE item_line.
DATA: fields_table TYPE TABLE OF rfc_fields.
DATA: wa_fields_table TYPE rfc_fields.
DATA: ind TYPE i.
CALL FUNCTION 'DP_GET_FIELDS_FROM_TABLE'
TABLES
data = sales_table
fields = fields_table.
READ TABLE fields_table INDEX 1 INTO wa_fields_table.
wa_fields_table-fieldname = 'Region'."#EC NOTEXT
MODIFY fields_table FROM wa_fields_table INDEX 1.
CLEAR wa_fields_table.
READ TABLE fields_table INDEX 2 INTO wa_fields_table.
wa_fields_table-fieldname = 'Sales'. "#EC NOTEXT
MODIFY fields_table FROM wa_fields_table INDEX 2.
CLEAR: sales_table, wa_sales_table.
wa_sales_table-region = 'USA'(usa).
wa_sales_table-sales = usa_sales.
APPEND wa_sales_table TO sales_table.
CLEAR wa_sales_table.
wa_sales_table-region = 'Europe'(eur).
wa_sales_table-sales = europe_sales.
APPEND wa_sales_table TO sales_table.
CLEAR wa_sales_table.
wa_sales_table-region = 'Japan'(jap).
wa_sales_table-sales = japan_sales.
APPEND wa_sales_table TO sales_table.
CLEAR wa_sales_table.
wa_sales_table-region = 'Asia'(asi).
wa_sales_table-sales = asia_sales.
APPEND wa_sales_table TO sales_table.
CLEAR wa_sales_table.
wa_sales_table-region = 'America'(ame).
wa_sales_table-sales = america_sales.
APPEND wa_sales_table TO sales_table.
CLEAR wa_sales_table.
wa_sales_table-region = 'Africa'(afr).
wa_sales_table-sales = africa_sales.
APPEND wa_sales_table TO sales_table.
CLEAR wa_sales_table.
LOOP AT sales_table INTO wa_sales_table.
ind = sy-tabix.
wa_sales_table-date = sy-datum + ind.
wa_sales_table-time = sy-uzeit + ind.
wa_sales_table-weight = 100000 * ind.
wa_sales_table-amount = 11111 * ind.
wa_sales_table-id = ind.
MODIFY sales_table FROM wa_sales_table INDEX ind.
ENDLOOP.
CALL METHOD table_coll->add_table
EXPORTING table_name = 'SALES_OUT'
table_type = table_coll->table_type_output
IMPORTING retcode = retcode
CHANGING data_table = sales_table
fields_table = fields_table.
CALL METHOD link_server->add_table_item2
EXPORTING item_name = 'Sales' "#EC NOTEXT
item_title = 'Car Sales Figures'(sal)
IMPORTING retcode = retcode
CHANGING data_table = sales_table
fields_table = fields_table.
CALL METHOD link_server->add_string_item
EXPORTING item_name = 'ChartTitle'
item_title = 'Chart Title'(ti0)
item_value = 'Car Sales by Region'(ti1)
no_flush = 'X'
IMPORTING retcode = retcode.
CALL METHOD link_server->add_string_item
EXPORTING item_name = 'ColumnTitle1'
item_title = 'Column Title 1'(ti2)
item_value = 'Region'(ti3)
no_flush = 'X'
IMPORTING retcode = retcode.
CALL METHOD link_server->add_string_item
EXPORTING item_name = 'ColumnTitle2'
item_title = 'Column Title 2'(ti4)
item_value = 'Sold Cars'(ti5)
no_flush = ' '
IMPORTING retcode = retcode.
ENDFORM. -
Where can i find the wall amount for 610 1201
where can i find the wall amount for 610 1201
This question was solved.
View Solution.c0rnel wrote:
Can you give me more descriptions on what a 610 1201 is?
Monitor? TV? What brand?
Not having very much luck finding the product you're describing but i'm more than happy to assist you with this.
I would assume since the OP is posting in the Touchsmart forum they are referring to the Touchsmart 610-1201 computer, no idea why you can't find it, the OP gave all the correct information.
OP you're probably looking for the #VK554AA adapter, but you will still need an additional VESA wall mount.
Google for "touchsmart wall mount adapter for vesa wall mount" and you'll see the many sources for this part. -
Where can i find the wall mount for 610 1201
where can i find the wall mount for 610 1201
c0rnel wrote:
Can you give me more descriptions on what a 610 1201 is?
Monitor? TV? What brand?
Not having very much luck finding the product you're describing but i'm more than happy to assist you with this.
I would assume since the OP is posting in the Touchsmart forum they are referring to the Touchsmart 610-1201 computer, no idea why you can't find it, the OP gave all the correct information.
OP you're probably looking for the #VK554AA adapter, but you will still need an additional VESA wall mount.
Google for "touchsmart wall mount adapter for vesa wall mount" and you'll see the many sources for this part. -
Where can I find the reason why a process was suspended?
Hi everyone,
where can I find the reason why a BPM process was suspended a in CE 7.11 system?
In "Manage Processes: Process Instances" is see it is suspended, but the history and data objects are fine, so I see no reason why it might get suspended. I assume some problems within a Mapping Activity, e.g. a Bunsiness Rules call does not work, or there is a data mapping problem. For further troubleshooting, I need more information...
BTW, I read
[SAP Help: Process Troubleshooting|http://help.sap.com/saphelp_nwce711/helpdata/en/c9/8bbe067ee343258b8dd83fee859092/content.htm] but it did not help me. The Process Server Log does not work, see [my SDN forum thread|"Process Troubleshooting: Process Server Log" does not do anything?!; so I can't look up there.
Thanks, Georghi,
see the NWA Log.
log in in <server>:<port>/nwa
*Problem managment>log and Trace>Log Viewer-->select Last 24 hours.
surely you are having an error in a automate task.
Thanks
Rodrigo
Edited by: Rodrigo Alejandro Pertierra on Apr 29, 2009 5:33 PM -
Where Can I Watch the Mountain Lion Keynote?
Hi. Where can I watch the Mountain Lion Keynote officially? Thank you in advance.
Gbu.Good description of Mountain Lion changes below with clickable topics, visual examples.
http://arstechnica.com/apple/2012/07/os-x-10-8/
http://thenextweb.com/apple/2012/07/25/tnw-review-os-x-10-8-mountain-lion/
http://www.usatoday.com/tech/columnist/edwardbaig/story/2012-07-25/apple-mountai n-lion-review/56474032/1
Microsoft Office to Mountain lion - a little off topic and a few caveats
http://www.zdnet.com/microsoft-office-2011-2008-works-with-os-x-10-8-mountain-li on-7000001628/ -
Fire Fox sent not all the data in text form. Reached only piece of information. Where can I find the cache sent the text?
For example, I posted an article on a news site, but found that only a small part of my article was posted.I'm not sure whether Firefox saved that information. There is a chance that it is in the session history file, especially if you haven't closed that tab yet. To check that:
Open your currently active Firefox settings folder (AKA your Firefox profile folder) using
Help > Troubleshooting Information > "Show Folder" button
Find all files starting with the name sessionstore and copy them to a safe working location (e.g., your documents folder). In order to read a .js file, it is useful to rename it to a .txt file. Or you could drag it to Wordpad or your favorite word processing software.
The script will look somewhat like gibberish, but if you search for a word in your article that doesn't normally appear in web pages, you may be able to find your data.
Any luck?
For the future, you might want to consider this add-on, although I don't know how long it saves data after you submit a form: [https://addons.mozilla.org/en-US/firefox/addon/lazarus-form-recovery/]. -
PI 7.11 - Where can I get the NEW java API's
Hi,
We use PI 7.0 in productive environment, but we plan a release update to PI 7.11. We have several Java Mappings for PI 7.0 with Java 1.4. So we have to upgrade this also to Java 1.5.
We are using following SAP Java libs:
- aii_map_api.jar
- aii_mt_rt.jar
- guidgenerator.jar
- sapxmltoolkit.jar
Where can we get the equivalent libraries of the PI 7.11 system. Are there new API's? Is there a documentation where to get this?
Thx in advance
MichaelThx !!!
Quick answer ) -
Where can I find the app "password Saver" by yonglin wang? while updating my iphone the app was dropped for some reason. I went to reload from my purchased apps and it is not available. The history shows my purchase but I can not find the app to reload. I've lost some critical info and need to retreive if possible. Any suggestions?
You tried what ? If the app is no longer available in the store (can you find it in the main part of the store ?) for re-downloading then you would need to have a copy of it somewhere e.g. on your computer's iTunes, on a backup of your downloads.
-
The link to system requirements for Firefox 4 beta takes you to a page that gives you the requirements for Firefox 3.6 instead. I assume that the requirements for the beta are different as I can't seem to install the beta on my Macs. Where can I find the beta system requirements?
I never expected Mozilla to neglect the users of Apple's PowerPC (PPC) computers, while still supporting much older operating environments such as Windows XP. So, I should just throw away a $6,000 system, which is still fast and functional, and contribute masses of heavy metals to land-fills because…?
I'm hurt and confused after supporting Firefox for many years — installing and using it not only on my own computers but on most of my customers' computers. Now I have to tell my customers with PPC Macs they can't have a secure cross-platform browsing experience from Mozilla. They'll have to learn to use some other browser, or buy a new computer.
If one doesn't buy a new computer every year, one doesn't deserve Firefox 4. This is sort of sounding more like a Microsoft™© doctrine. (But wait, I can still have Firefox 4 on a ''SERIOUSLY CRAPPY WINDBLOWS XP pile of rubbish?!'') Please open your eyes Mozilla. This just doesn't make sense.
Maybe you are looking for
-
How do I get music to stream to Apple TV from my macbook air with Mavericks
Just bought a Macbook Air last week. I am very conversant with Apple TV and Macs. I have two iMacs and stream music from them to Apple TV and it's fine. They are running Lion and Snow Leopard. My Air is running Mavericks. I open iTunes, enable Home
-
Adjusting frame to image - linked images
hi, I have a bunch of images inserted in indesign, linked from an eps file. I have modified the images in illutrator and now updating links I have to modify the frames because the graphics are longer and they don't fit the image frame. I can go one b
-
How can i retain rss in safari mavericks
how can i retain rss mavericks in safari
-
Intel chip virus vulnerability?
I'm interested in getting a mac mini or any mac for that matter with the new intel chips but I'm a little nervous since I've heard that the new system architecture could make macs vulnerable to virus' like pc's are. I have an Ibook g4 and the one of
-
Extension Manager CS5/Win7/64 hangs and won't open
I am on a Win7/64 running CS5. Yes, it EM worked before. Now it hangs - I have manually (thru AppData) moved the extentions over but can't turn them on becuase I can't launch EM. I have read all of these forums and tried the solutions given and nothi