Where can I see, how long my garanty is yet?
can somebody help me?
If you are looking for the duration of your warranty coverage, you can check here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Similar Messages
-
Can I see how long an "away" buddy has been idle also?
Hi,
Is there a way for me to see how long an "away" buddy has been idle? It's long been a feature of regular AIM but I can't figure out if it's even available in iChat. A buddy may be idle for several hours when away, and it would be convenient to be able to see both idle and away status simultaneously. Please let me know. Thanks.I can tell that wasn't helpful so here it is... Using iChat if the person simply leaves their computer (doesn't post an away message) you can then see how long they've been idle. Otherwise if they post the default Away or their own custom away message it does not additionally show their time away or idle time. I know!!! it should though (unless their is an add-on application out there, which I haven't seen one that can make this happen)... iChat doesn't show this information in this case. Sorry.
-
Can I see how long the longest entry has been in the sticky table ?
Hi,
I have a customer who has a possible issue with the sticky inactivity timeout on the CSS. At the moment we are using no timeout, just relying on the CSS to purge the entries.
However, is it possible to see how long the longest entry has been in the sticky table. I can see the 'elapsed time' with the 'show sticky' command but this only shows 100 entries per time and not in time order ?
Thanks in advance for any helpMichael,
You can use the command "show sticky-table" with L3 or L4 options, depending on what you have configured, then add ip addressing to the command, to focus down to where the oldest sticky entries are likely to be, but theres no other way. If your problem is having too many entries, configure a sticky timeout, as the default of 0 will keep then forever, or until overwritten due to the table being full. If the problem is sticky entries timing out too early, you can use the timeout parameter to increase their life, but the sticky table is limited to 32k entries.
Peter -
Where can I find how long until my upgrade?
I have the Motorola Rival and I can not stand this phone! I just stopped working..the screen is blacked out and the keyboard and everything is blank and its done its not working anymore and I want to know how long until my upgrade? I cant find it in My Profile ANYWHERE! HELP PLEASE!
If you call customer service they can tell you how long until your upgrade and if you phone is broke and your not eligible for an upgrade yet ask about gettting a certified pre owned phone. Your allowed one per year but you have to pay for it. I think I got my droid eris to replace my broken phone and it was $169.99+tax and you can have the equipment billed to your next bill.
-
Where can i see, how much diesel is consumed by one of my cost centre
pls let me know how can i see the consn of diesel to one of my cost centre ?
regds,
CBhi
go to KSB1
here u will get details for cost center
here select further selection criteria here in documents objects select material
so the material field will be theree for selection so u can now put material as well cost center
regards
kunal
Edited by: kunal ingale on Jan 9, 2009 10:01 AM -
Where can I see how much RAM I have used and how much I have left?
I'm not sure where to see my RAM availability.
Finder, Applications, Utilities, Activity Monitor and you can look at memory, CPU, storage, network
-
Where can I see how much space mac mail is taking on my hard drive?
I have a gmail, yahoo mail and icloud mail that I access on Mac Mail. Does it take up much space on the HD? I'm assuming they are all stored on the web servers but where do I look on the Mac to find what space they are taking up on my Mac?
In the Finder, hold the Option key and then choose Library from the Go menu. Then locate the folder called "Mail," and get information on it and note the calculated size. In addition, do the same for the Mail Downloads folder, and these two should constitue the majority of the space used by Mail and its configured accounts.
-
I just bought the Pages App for my iPhone and iPad, I clicked on buy now and it started to download and it seems that I have purchased the App, but I think I do not have any credit on my balance, so my question is where can I see how I paid for the App without paying anything. Or do I need to pay for the app on a later date?
In iTunes on the top right part of the screen, sign in to your account (if you haven't done that yet). You can see your past purchase from the screen after you signed in.
-
How and where can i see the values of 0CURRENCY
Hi gurus,
How and where can i see the values of 0CURRENCY, for example if the key value is VEB how can i see it that means "Bolivares" , some days ago i had a similar doubt with 0UNIT, and some friend helped me , saying: go to the Transaction CUNI , and it works, but now my doubt is with 0CURRENCY, thanks guys !Table TCURC will give you the long and short text for the currency keys. You can also display in a query by adding 0CURRENCY to the drilldown and displaying key and text.
Regards,
Kerry -
How can I see how often and where an image is used in the site?
Just realized the post appeared twice as at first sending I
got an error page (contains no data...).
So, please do all answer to the other post, so that all
replies get collected at one post only.
Hello,
please excuse my maybe dumb question but converting from
GoLive I am still trying to find several practical effective
workflow features in DW ...
1. where in the sitewindow/assets or files panel can I see an
indication at each image if and how often it is used in a site?
2. and where can I see/check on which pages it is used?
Thanks in advance for guiding me there ...
bye,
Beate> How do DW users know how often and where an image is
used on the site
> then?
I'm not sure what the benefit is of knowing how often an
image is used, but
a search for the image by filename would do the trick.
And just so you'll know, this is a peer forum, not an
official communication
vehicle to Adobe. We are all just users here, not Adobe
employees.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"beatrice" <[email protected]> wrote in
message
news:[email protected]...
> OK. I sent the below feature request.
> How do DW users know how often and where an image is
used on the site
> then?
> always doing a find/search?
> in GoLive there was an simple window where all the files
a page consisted
> of
> were listed plus all the files that were pointing to
that page. such,
> without
> having to open a page links and image and componentes
etc. could be
> changed via
> point&shoot.
>
> Couldn't you all think of this a being great and helpful
and making site
> management easy? Then send in a feature request as well,
please.
>
> ...............
> How can one know by the assets or files list if an image
is used at all on
> the
> site?
> and how many times? and on which pages?
> This is very useful to know especially in larger sites.
> e.g. an image should get changed on one page, now it
would be very good to
> see
> if when it was used on other pages as well if it would
make still sense
> there
> when changed.
> as DW can update files (when e.g. an image name gets
changed) there is a
> way
> this is already recorded. why not take this records and
send this back
> into a
> list/column in the files panel to indicated that the
image is used and
> how
> many times.
> plus to have another window that can display all the
pages the image is
> used
> in.
> so one could click through all those pages and open them
to check the
> image
> there.
> in GoLive that feature was called 'In and Out links' and
one could see a
> page
> in the middle and left and right from it many
branches/lines at which ends
> the
> filenames were visible used in that page.
> so one e.g. could also point and shoot from this list
and change a file or
> image or component simply by point and shooting to the
files panel without
> having to open the pages.
> These features were so practical for an effective daily
workflow that I
> don't
> understand why they haven't been put into cool DW yet.
Please, please do
> so in
> the next release. I can test it thoroughly if you need
testers for it.
> bye,
> beate
> -
What are SMOUTIL1,SMOUTIL2,SMOUTIL3?where can i see?how to use them?
What are SMOUTIL1,SMOUTIL2,SMOUTIL3?
where can i see?
how to use them?
Please tell me,Thank you very much.SMOUTIL1, SMOUTIL2, SMOUTIL3 are considered the WMD's of the CRM middleware.
If they fall into improper hands, your middleware system could be wiped out and destroyed, reaping havoc on both CRM & ERP.
Please read the all the documentation located here, before you try to use these wmd's.
http://help.sap.com/saphelp_crm40/helpdata/en/c8/93ad3a9bfd664ee10000000a114084/frameset.htm
You may want to also first read the book just published by the SAP press called the SAP CRM Middleware optimization guide, before you try doing any work with the CRM middleware.
Take care,
Stephen -
I need to reinstall creative cloud, but can't see how. Nothing works anymore!
Hi, I've had some issues with my iMac and need to reinstall Creative Cloud. I no longer have the software to uninstall, and can't see how to reinstall on the Adobe website. Where do I go from here?
You can delete the alias also Adobe creative cloud if you have that in Application folder and try downloading CC cleaner tool for MAC Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Run the software and remove Creative cloud Desktop app.
Navigate to the OOBE folder.
Mac OS: /Users/[user name]/Library/Application Support/Adobe/OOBE
Delete the OOBE folder.
Access hidden user library files | Mac OS 10.7 and later
You can download it again from here: Free Creative Cloud | Download Adobe Creative Cloud free trial
Sign in and then try to install CC apps. -
How can I tell how long a request has been sitting on an execute queue?
Is it possible to determine (in WL 8.1 and/or 10.3) how long an HTTP request has been sitting on the execute queue before being assigned to a servlet?
Under heavy load, I'm finding that the caller times out by the time the servlet tries to write the response because the request has been waiting on the execute queue for too long. To prevent doing all the work to process the request, I want to be able to see how long the request has been waiting to determine whether it's worth processing the request.
Currently I use the getExecuteThreadTotalCount() method in ExecuteQueueRuntimeMBean and assume that if the count is high, the request has probably been waiting for a while, but getting the actual time on the queue would be much better.
Thanks.Further investigation and a bunch of speed tests later, I'm even more puzzled. Between 7 pm and 9pm this evening, download speed has been consistently at 112kb, except for the 1 in 10 occasions where it hits 1.5mb, for 30 or 40 seconds, before dropping back to 112kb.
Does anyone have any ideas what is going on?
thanks in advance
Ben -
Reinstalled windows. Now can;t see how to get Photoshop, Bridge and lightroom back
After a complete reinstall of my system, I just came to the Adobe site wanting to download my products and can;t see how to do it. Might just be missing the obvious, but I dunno...any ideas? Where do I go to download the Creative Cloud app, and from there I can presumably download the products I have paid for...
You can check your Adobe account onoline and see if there are links there for your products. If you purchased them as downloads thru Adobe then they might be. Otherwise, you should be able to find them thru the following page:
Download and Installation Help -
https://helpx.adobe.com/download-install.html
You will need your serial number as well, which might be found in your Adobe account online if you registered the software. -
Where can I see output from ClassInitialize and ClassCleanup
Hi,
If I write
TestContext.WriteLine("Some output")
or
Console.WriteLine("Some output")
inside a test method, i see an "output" link in the Test Explorer and when I click it I can see the output "Some output". This is also true when I do it from a [TestInialize], [TestCleanup] and even [AssemblyInitiailize] or [AssemblyCleanup]
methods. However, if I do that from a [ClassInitialize] or [ClassCleanup] methods - I can't see the output.
Is there any reason for that? How/where can I see any output that I write inside ClassInitialize?
AFAIR, in VS2010 I was able to see that from a link on the Test Results pane, but I currently don't have VS2010 installed to verify it.
Thanks,
Arnon.
Arnon AxelrodHi Arnon,
>>I checked it again, and I realize that it works OK for regular MSTest classes (with [TestClass] attribute), but not for Coded UI (with [CodedUITest] attribute).
I think I could repro this issue in my side, I get the same issue as yours using the VS2013 with the latest update package, it doesn't support it in Coded UI tests even if I enable the detailed coded UI test log:
https://msdn.microsoft.com/en-us/library/jj159363.aspx
To get the issue confirmed and diagnose by product team, would you please create connect report for it? You will get email notification for update.
http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx
If you submit the report, please share us the link here, I will help you vote it.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Block Plan Order and Purchase Requisition in Sales order creation.
Please tell me, how to block Plan Order and Purchase Requisition while creating Sales Order. When we create a sales order, plan order and purchase requisitions are also created by their own, please tell me, how can we block them while creating sales
-
New to Apple have had great fun editing in iMovies and iPhoto but have become frustrated having created a slide show using a them in i photo I want to add it to iDvd to complement i movie that already is there. Can Iexport slide shows with their them
-
Face Time not working in my Iphone 4
do iphone equiped with face time app?? some one answer me please.
-
Creator 2 update 1 install error on Debian
I have a debian system running the 2.6.15-1-k7 kernel. When I tried to install Creator 2 I eventually get the message that compat-libstc++ and compat-libstdc++-devel not installed. I found an RPM file for Redhat 3 and Fedora 2. After installing it an
-
Default values in query designer
Hi, We have little weird requirement in our project. We have 2 variables on week char. in the query. One in global restriction which is manual input and other is in default values which is populated through customer exit. This is done to make sure if