Where can I see how much RAM I have used and how much I have left?

I'm not sure where to see my RAM availability.

Finder, Applications, Utilities, Activity Monitor and you can look at memory, CPU, storage, network

Similar Messages

  • I got my newly bought (within 30 days) ipad mini cracked, and the screen was broken, where can I find a place(montreal) to replace it, and how much will it cost?

    I got my newly bought (within 30 days) ipad mini cracked, and the screen was broken, where can I find a place(montreal) to replace it, and how much will it cost? Can i get a free replacement in apple store since within 30 days?

    huilihuili wrote:
    Can i get a free replacement in apple store since within 30 days?
    No. Damage caused by the user is not covered by warranty. A replacement iPad mini is $219 for the 1st generation, or $249 for the iPad mini with Retina display.

  • HT5527 I don't have iCloud in my system preferences, I am using 10.6.8 how do I see how much storage I am using and how do I purchase more?

    I don't have iCloud in my system preferences, I am using 10.6.8 how do I see how much storage I am using and how do I purchase more?

    You can't check your usage on the iCloud website - you have to do this from the iCloud prefs pane, which you don't have. If you are only using it for email you would have to be storing an awful lot of messages to exceed 5GB. If you are concerned about this you can download some of them to your Mac and off iCloud.
    To do this simply create a folder under 'On My Mac', go to the iCloud mailbox, select some of the messages and drag them to the folder you created. Don't try to do too many at once (say more than 100) and allow time for them to download.
    If you haven't yet set Mail up to access iCloud, but are simply using the website, you can set it up as detailed here:
    Entering iCloud email settings manually in Snow Leopard or Leopard
    If you do decide to upgrade, the latest version of iPhoto is only £10.49, though MS Office is more of a problem. But you can go on as you are as long as your Mac holds out - Snow Leopard is a good solid system.

  • Where can we see the text corresponding to a TDNAME and CLUSTID of STXL table?

    Hi,
    Can  anyone please tell me how and where can we see the text corresponding to a entry in STXL table.
    I can see only CLUSTID for a TDNAME in STXL table,but I need the corresponding text and in which other table this text is stored,
    Thanks,
    Vamsi

    got my answer
    import tline to rt_lines
         from database stxl(tx)
              client   rt_client
              id       stxl_id
    the fields of structure tline cannot be seen physically in any table.
    Here the id - stxl_id forms the key of table stxl.
    So against this key we are exporting the data clusters in database tables and application buffers of the shared memories  using below code first
    export tline from wt_lines
           to database stxl(tx)
              client   wt_client
              id       stxl_id.
    Finally we are importing that data using import statement into rt_lines which we exported earlier from wt_lines.
    In stxl(tx) the tx value corresponds to RELID field in STXL table
    Regards,
    Vamsi

  • My old laptop broke. Now I have a MacBook Pro. When I click on Purchases on the iTunes Store I can't see my Purchased music. Just Apps and Books. I have authorised my Mac but still can't download my music. How can I get my music back?

    Help

    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    (the music feature currently works in the US only)

  • I have plenty of mg available on my phone but itunes won't sync saying there is not enough room on my phone.  In usage it shows me exactly what how much storage I have used and how much  is available and I have plenty available.

    iTunes won't sync my music showing a full capacity bar when syncing but I have tonnes of space on my phone

    Hi SuziWine1!
    Here is an article for you that will help you address this issue:
    iOS: "Not enough free space" alert when trying to sync
    http://support.apple.com/kb/ts1503
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • Where can i see the movies that i rented on my ipad

    Where can I see the movies that i rented recently and it keep saying go to download but there is no download name there not like before ?

    Have yo looked in the Videos App?

  • What are SMOUTIL1,SMOUTIL2,SMOUTIL3?where can i see?how to use them?

    What are SMOUTIL1,SMOUTIL2,SMOUTIL3?
    where can i see?
    how to use them?
    Please tell me,Thank you very much.

    SMOUTIL1, SMOUTIL2, SMOUTIL3 are considered the WMD's of the CRM middleware. 
    If they fall into improper hands, your middleware system could be wiped out and destroyed, reaping havoc on both CRM & ERP.
    Please read the all the documentation located here, before you try to use these wmd's.
    http://help.sap.com/saphelp_crm40/helpdata/en/c8/93ad3a9bfd664ee10000000a114084/frameset.htm
    You may want to also first read the book just published by the SAP press called the SAP CRM Middleware optimization guide, before you try doing any work with the CRM middleware.
    Take care,
    Stephen

  • Can someone explain the icloud to me please? Where are all my old pictures and how can I see them? Photostream only holds 1000 and when I sync my icloud to my mac it only imports what is on my photo stream.

    Can someone explain the icloud to me please? Where are all my old pictures and how can I see them? Photostream only holds 1000 and when I sync my icloud to my mac it only imports what is on my photo stream.

    When you enable photo stream on your Mac, in imports photos currently in your photo stream.  However, photo stream only keeps photos for 30 days, even though up to 1000 photos will remain on your device until you delete them.  When you enable photo stream on your Mac, you will only receive photos added in the last 30 days, as the others are no longer in your photo stream.
    If you want to get all your old photos on your Mac, save them to your camera roll (if they aren't already there) by opening your photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll.  Once they are in your camera roll, import them to your Mac as explained here: http://support.apple.com/kb/HT4083.
    Another option would be to create a shared photo stream containing the older photos and invite yourself (as explained here: http://help.apple.com/icloud/#mmc0cd7e99).  Then check Shared Photo Streams in iPhoto>Preferences>Photo Stream and you will see this shared photo stream on your Mac.

  • How and where can i see the values of 0CURRENCY

    Hi gurus,
    How and where can i see the values of 0CURRENCY, for example if the key value is VEB how can i see it that means "Bolivares" , some days ago i had a similar doubt with 0UNIT, and some friend helped me , saying: go to the Transaction CUNI , and it works, but now my doubt is with 0CURRENCY, thanks guys !

    Table TCURC will give you the long and short text for the currency keys.  You can also display in a query by adding 0CURRENCY to the drilldown and displaying key and text.
    Regards,
    Kerry

  • How can I see the information about a file used in a sequence?

    How can I see the information about a file used in a sequence?

    You can use pretty much any two or multiple button mouse on a Mac, right out of the box.
    I use this one: http://www.apple.com/mightymouse/

  • Where can I see output from ClassInitialize and ClassCleanup

    Hi,
    If I write
    TestContext.WriteLine("Some output")
    or
    Console.WriteLine("Some output")
    inside a test method, i see an "output" link in the Test Explorer and when I click it I can see the output "Some output". This is also true when I do it from a [TestInialize], [TestCleanup] and even [AssemblyInitiailize] or [AssemblyCleanup]
    methods. However, if I do that from a [ClassInitialize] or [ClassCleanup] methods - I can't see the output.
    Is there any reason for that? How/where can I see any output that I write inside ClassInitialize?
    AFAIR, in VS2010 I was able to see that from a link on the Test Results pane, but I currently don't have VS2010 installed to verify it.
    Thanks,
    Arnon.
    Arnon Axelrod

    Hi Arnon,
    >>I checked it again, and I realize that it works OK for regular MSTest classes (with [TestClass] attribute), but not for Coded UI (with [CodedUITest] attribute).
    I think I could repro this issue in my side, I get the same issue as yours using the VS2013 with the latest update package, it doesn't support it in Coded UI tests even if I enable the detailed coded UI test log:
    https://msdn.microsoft.com/en-us/library/jj159363.aspx
    To get the issue confirmed and diagnose by product team, would you please create connect report for it? You will get email notification for update.
    http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx
    If you submit the report, please share us the link here, I will help you vote it.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Where can I see my balance

    I just bought the Pages App for my iPhone and iPad, I clicked on buy now and it started to download and it seems that I have purchased the App, but I think I do not have any credit on my balance, so my question is where can I see how I paid for the App without paying anything. Or do I need to pay for the app on a later date?

    In iTunes on the top right part of the screen, sign in to your account (if you haven't done that yet). You can see your past purchase from the screen after you signed in.

  • Where can I see API for ADF Internal Class for a Specific JDev Version

    Hi,
    I wanted to check the API for certain ADF internal classes. Is this possible and where can I see it?
    I know also for a fact that its not good practice to make use of the internal class but my case is a little different
    so I would like to extend how the internal class is working.
    I use JDev 11G PS3 (11.1.1.4)
    Thanks

    Hi,
    Hope following will useful
    http://download.oracle.com/docs/cd/B14099_19/web.1012/b14022/overview-summary.html
    http://download.oracle.com/docs/cd/B14099_19/web.1012/b14022/allclasses-noframe.html

  • Where can we see Fact Table And Dimension Table in DataWarehouse Workbench?

    Hai Experts
    where can we see Fact Table And Dimension Table in DataWarehouse Workbench?
    Best Regards
    nvnkmr12

    Hi
    Refer the link below and you will get a comprehensive explanation of how data is stored and modeled in BI. If explains fact table, dimension table, SID table, P and Q , X and Y tables.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/6ce7b0a4-0b01-0010-52ac-a6e813c35a84
    Cheers
    Umesh

Maybe you are looking for