Where can I see the list of Ibook 2 educational textbooks available to the USA?

Hi,
Is there a way for non-Americans to see the list of educational textbooks available in the USA?
or... would any American user kindly list them as of today?
PS: I'm not American (Canadian).
Thanks

After hours of fidgeting and looking into it, I managed to change stores in itunes and was able to look at the selection you have.
Reading the comments proved to be quite insightful: while the idea behind ibooks' textbooks is highly appealing, it is far from living to its potential. There were a lot of comments on published textbooks such as Pearson's and McGraw Hill's (aka major publishers) that were riddled with bugs, incorrect information (especially on quizzes) and, worst of all, spelling mistakes (that aren't found in the print version). The redeeming factor may be that purchased textbooks are automatically updated - however, there were few comments on how textbooks were improved other than spelling.
I find it underwhelming to see how much space these textbooks take up while their level of interactivity is not up to par with the advertising. A lot of comments dealt with how videos would not play and that the interactive content was poorly implemented.
At 2-3 gigs per book and the reasons listed above, I do hope smaller publishers capitalize on this oportunity to produce higher quality and interactive content. After all, if it is not for its added interactive features, the pedagogical value is severly limited.
My two cents (as a Canadian teacher).
I'd sure would love to hear how other teachers really do think about ibooks' textbooks, including American educators and their hands-on experience.
Thanks

Similar Messages

  • Where can I get a list of all Oracle products available in the Cloud?

    All Oracle Products available in the Cloud can be viewed here
    Applications can be accessed under dedicated "Knowledge Zones" where you can have insightful information about the product, how to develop, implement, market and sell the solutions. Also, under "Join the discussion" tab, you can engage with Oracle and follow the discussion on dedicated social media channels.

    LOL what a useless doc.  Maybe https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=612452503286937&id=1337394.1&_afrWindowMode=0&_adf.ctrl-…
    is a bit better, but good luck trying to be Itanium specific.
    Edit:  Well, so much for trying to paste in an MOS doc link.  It's called 10.2.0.5 Patch Set Updates - List of Fixes in each PSU [ID 1337394.1]

  • Where can I see a list of ical invitations i've sent?

    I am a new Mac user. When I send calendar invites in Outlook, I see the sent invitation in my email sent folder.  Where can I see a list of invitations i've sent from the Calendar app on my macbook pro?
    Thanks!

    Open App Store and click on the Purchases icon in the toolbar.

  • Firefox deleted a program and I need it back - where can I see a list of programs Firefox deemed a security risk?

    Firefox reported a program as security risk and I hurriedly deleted. It is not a virus it is a very important program I need o work. How can I retrieve this program?

    you're probably referring to the deactivation of the java plugin - go to [java.com] and download the latest version that has the security vulnerabilities already fixed.
    also see [[Unblocking the Java plugin]]

  • HT201272 Where can I see a list of purchases

    Purchased coins for a game, was charged but never received the coins. How do I (a) download the coins or (b) reverse the charges

    iTunes, Store, Purchases should show what you have purchased; you can also go to the Expresslane at https://expresslane.apple.com and then to Issues to seek help or iTunes then iTunes Store for help.

  • Where can I see a list of things I have pre-ordered?

    I can't seem to remember where to look to find a list of pending items I have pre-ordered. CAn anyone help?

    If you log into your iTunes Account, it may be in Acount Information/Purchase History

  • Where can I find a list of NI-DAQ functions supported over the RDA server?

    Hello,
    I am developing an application in Microsoft VisualC++ for PXI6071E MIO card remotely using RDA server.
    What I found out is that not all the functions described in the "Traditional NI-DAQ Function Reference Help" shipped with NI-DAQ version 7.0 are supported over the RDA server (e.g. Init_DA_Boards, or AO_Configure).
    Is there any document available where the functions supported by the RDA server are listed? It will help me a lot instead of manually executing all the needed functions and building this list by myself.
    Thank you in advance,
    Silvius
    Silvius Iancu

    Hello Sarah,
    Thank you very much for the link.
    Based on this article I included the easyio.h and easyio.lib from LabWindows/CVI into my VC++ project and I managed to perform the needed operations using Easy IO function calls.
    As a result of my own tests, the Analog Input functions provided by nidaq are not supported by the RDA server, but the General Purpose Timer/Counter functions are well supported.
    Hopefully the future versions of NI-DAQ will be fully supported by the RDA server.
    Thank you for your help,
    Silvius
    Silvius Iancu

  • Where can I find a list of all the credits applied to my iTunes account?

    Hi,
    I'm aware I can see my purchase history in iTunes but where can I see a list of all credits (vouchers) and debits (app purchases)? My account is showing zero credit and I want to confirm which top up vouchers I've applied to make sure they're fully spent.
    Thanks,
    Mark.

    Mark,
    There is no way to view a history of the cards that you have redeemed.
    When you redeem a card, check immediately that your credit balance has been incremented by the appropriate amount.

  • Where do I see a list of my incoming calls online

    Where can I see a list of my incoming calls on the Verizon website?

    Doesn't work for all types of accounts.  For those it does, Its as of the bill date.
    I remember when all phone bills listed such but I haven't seen for my accounts in years.
    note FIOS Digital Voice customers can see on the www.verizon.com/fiosvoice

  • Where can I see a full feature comparison of Nokia...

    Where can I see a full feature comparison of Nokia handsets? The Nokia website used be great for this, but now they've "upgraded" to a useless blue blob and the comparison engine has been reduced to "Smarrtphone or non-smartphone" and "Qwerty or touch", but the full feature comparison that used to be there has gone. 
    Thanks for any help.
    Solved!
    Go to Solution.

    petrib wrote:
    The developer site that phonehacker pointed you to has an "expert" search page (ugly and almost incomprehensible web form) that allows you to specify exact features, and then get a list of only devices that match those features.
    http://www.developer.nokia.com/search/?view=ds
    We've gone from one extreme to another
    I'm not a developer and I have no clue what any of those terms mean. All I am looking for is a layman's comparison search and nothing to technical.
    - Bluetooth Yes/No
    - Email Yes/No
    - WiFi Yes/No
    - Quadband Yes/No
    etc...

  • Where can i find a list of apple tv movies

    Where can I find a list of apple tv movies?

    On the Movies app, or in any installation of iTunes on a computer (signed in with an AppleID).

  • Where can I see the downloads LIST when downloading podcasts, like in the older version of iTunes?  I find it frustrating that I see only one at a time now !  Any suggestions please?

    Where can I see the downloads LIST when downloading podcasts,
    like in the older version of iTunes?  I find it frustrating that I see only one
    download at a time now !  Any suggestions please?

    Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
    I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
    My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
    I haven't tried installing the latest beta. Maybe that would fix the problem.
    Toddo

  • In my Itunes account, I can not see my list of songs in my files, nor can I look for individual songs in the Itunes store. Basically, anywhere there are list, I can not see them. What can I do to fix this problem?

    I am having trouble with my Itunes account on Windows XP . I can not see any list in my music files. The songs are there but I have to click on each song to see what it is. Also, in the itunes store, I can not see any pull down list or use my search bar. This happened when Itunes updated it's look. I can pull it up on my phone and see all of my purchased music. I would really appreciate knowing how to fix this problem. Thank you.
    Traci Lemley

    Nevermind - I answered my own question, which is I CAN"T READ ANY BOOKS I purchased in iBooks on my MacBook Pro.  If I want to read on my mac I have to use Kindle or Nook.  Which means any book I've already purchased through iBooks has to be read on my iPad.  Kind of a drag because there are times when it's more convenient for me to read while I'm sitting with my Mac.

  • Where can I find a list of the 1600 /- instruments included in the new Logic Pro X?

    Greetings,
    Where can I find a list of the 1600+/- instruments included in the new Logic Pro X?
    Thanks all!

    AFAIK, there is no master list. If you have the Silicon Prairie "Tools" utilities, you can compile your own lists. See: Silicon Prairie - FrameMaker Products
    The best approach is to simply use the Copy Special to pick up the paragraph and character styles that you want to add to your new template and build the template piecemeal, i.e. create one FM file for your tables, another for your page layouts/sizes, another for your tags, cross-refs, etc. Then combine those as required to build the final template. This Lego-like approach is much more flexible and allows you to modify base-components and quickly make a new brand new template.

  • How can I see a list of the assets associated with a sequence?

    How can I see a list of the assets, both online and offline, associated with a sequence?

    Exporting an EDL or copying and pasting a timeline into a bin gives a complete list of the clips in a sequence, but what I really would like is a list of the files used, without any duplications due to multiple clips from a single reel. Is there any quick way to automatically generate such a list?

Maybe you are looking for

  • How do I erase background from gif graphic in Photoshop 7  for use on website?

    I am using Photoshop 7 and am trying to convert a jpg photo from my camera to a gif that I can use on  my website.  I erased a background on a photo with checkerboard pattern) one time (that's what I am trying to find again) and I can't find that era

  • What is  USER_EXIT for  VL02N while  PGI

    Hi, While doing PGI System should calculate pallet no. For i wrote code in this FORM USEREXIT_SAVE_DOCUMENT use exit in INCLUDE MV50AFZ1 . While I am assign pallet no in likp its not updating LIKP transparent table. case sy-ucomm. when 'WABU_T' OR 'W

  • Error in adding custom fields to mm01/mm02/mm03 trx

    Hello People, To add my custom fields in the basic view tab of MM01 transaction, i have performed the following steps:- 1. Inserted the append structure in MARA table with the required fields. 2. Copied function group 'MGD1' to 'ZMGD1' and then set t

  • Home sharing not working on windows pc. Any help would be great!

    I have recently obtained an Apple TV however I am currently unable to access my music on itunes via home sharing from my windows 7 pc. I have the latest version of iTunes, having updated it a few days ago, and have made sure that all of the apple acc

  • How do I add a mouseEvent to an area

    does anyone know how i add a mouseEvent to an area? i want to test the response of the user to hit a Graphic on the screen but i dont know how to make the Graphic so that it can be hit. Simple enough problem just im a bit dim. lol THanks for any help