Where could I find, live disk or other to restore HDD recovery partition?

Hello I have a A300 1M9 system unit.
I need to restore the HDD recovery partition, I had to change the harddrive disk, cause he is dead.
Is there any link where I could download the files? ISO img or other program able to create a new recovery partition on a new disk?
This computer is not under warranty, because he has more than 4 years.
Thank you for all the support you could give me
Seb
ps : second question : wich kind of hard drive disk could I buy for that model ? Wich connector, 2 1/2 hdd and sata? Ide? I dont know.
Message was edited by: Seaone

Hi and welcome in our community.
This is user-to-user forum so here you will not get answer from Toshiba technicians.
I have a bit experience with Toshiba laptops. Meanwhile I use my third Toshiba machine. ;)
I have A300 to and must say it is very good piece of hardware. So here is answer to your question:
Recovery image cannot be downloaded. You got your notebook with preinstalled Vista and preinstalled Toshiba recovery disc creator tool. With this tool you could create recovery disc. This disc can be used in situation when recovery partition is damaged or you want to use new HDD.
So I presume you dont have it. Original recovery disc can be ordered on https://backupmedia.toshiba.eu/landing.aspx
My advice: I use Win7 32bit on my A300 and it works perfectly and very stabile. Dont waste your time trying to obtain original recovery disc. Install own Win7 version. F you need some assistance I can help you with installation and configuration.

Similar Messages

  • I´ve installed Photoshop CC 2014 on one computer but when I should install the program on my other computer it ask for a serial number. Where could I find this?

    I´ve installed Photoshop CC 2014 on one computer but when I should install the program on my other computer it ask for a serial number. Where could I find this?

    Hi,
    No serial needed for subscriptions.Your applications can't communicate with the activation server.
    Check and delete Adobe entries on your hosts file as explained on step 3 :
    Sign in, activation, or connection errors | CS5.5 and later

  • I deleted some JPG files in Bridge CS5. They are not in the trash. Where could I find them?

    I deleted some JPG files in Bridge CS5. They are not in the trash. Where could I find them?

    From the Finder menu select 'Secure Empty Trash'. If this or the suggestion above doesn't resolve the problem take a look at the various suggestions in this link:
    http://www.thexlab.com/faqs/trash.html

  • Where could we find the CT and PT values  for Particular Device ???

    I 'm facing a scenario in  a report  i need to place a  field device number and assosiated  CT's and PT's .
    where could we find the CT and PT values  for Particular Device ??? basically im MM consultant   we don't ahave  DM consultant  please help with this issue???
    means actually i got the table and field  details  for transformation ratio (or) CT/PT ratio
                          ETYP_UEBERVER. from the screen EG03 , t-code
                            but im not sure   this  is the exact field that i require  ....
    can any one help ....   i will be very  thankfull to your  solution  inadvance....

    The transformation ratio are the attributes of a "Winding Group".  Find winding group of a device and then you'll get the desired information.

  • Where could I find the file been download from mail?

    Where could I find the file been download from mail?

    Unless you've got an app that supports the file type, and you've used Mail's 'open in' function (by holding the attachment and selecting where to store/copy the file), then the file/attachment will only be attached to the email itself in the Mail app.

  • I'm in need of java runtime for my iphone 4s5.0.1. where could i find it?

    i'm in need of java runtime for my iphone 4s5.0.1. where could i find it?

    Hi.
    JAVA on iOS, I heard that
    iPhone will never support JAVA.

  • Where could I find java coding specification

    Where could I find java coding specification.
    I don't know what it really names for, I think it gives a principle for how to coding java program.
    For example, it will tell us which one is better between "final static" and "static final"

    For example, it will tell us which one is better
    between "final static" and "static final"neither of these, it's
    static public final
    Rules:
    first static as theses are class
    variables/methods that don't need instantiation. Then
    the non-static fields/methods. Therefore, "static"
    should be the first keyword for clean grouping.
    Then the visibility like public, protected,
    private (in this order) should be used. (see
    [url=http://java.sun.com/docs/codeconv/html/CodeConven
    tions.doc2.html#1852]Instance variables).Afterwards use final which should be the last
    keyword before the variable type / method return type
    / method parameter type, e.g.
    static public final doThis(final String key) {
    }If these are the "rules", then why is the convention for the main function
    public static void main(String[] args)?

  • Could anyboody please tell me where could i find sample graphics swf files

    Hi  all
    I am trying to download some graphics swf file for applying skinning to my FLex components .
    But i cant find any free graphics swf  files .
    Could anyboody please tell me where could i find sample graphics swf files ??
    please guide me . Thanks

    Thank you very much .
    I like this below URL  Component very Much
    http://ntt.cc/ext/Themes-Skins-For-Adobe-Flex/demo/BlackBlue/BlackBlue.html#app=2370&dfb0- selectedIndex=0&aa12-selectedIndex=2
    how can i apply this skin to my components ??
    Thanks .

  • HT4718 No 1.    I can not activate Filevault : FileVault can't be turned on for the disk "Macintosh HD". Some disk formats don't support the recovery partition required by encryption. To use encryption, reinstall this version of Mac OS X on a reformatted

    I have TWO PROBLEMS
    No 1.  I can not activate FileVault. It displyas as follows :
    FileVault can’t be turned on for the disk “Macintosh HD”.
    Some disk formats don’t support the recovery partition required by encryption. To use encryption, reinstall this version of Mac OS X on a reformatted disk.
    No 2. I can not activate Find My Mac service. It displays as follows :
    Find My Mac requires a recovery partition
    Some configurations, such as software or hardware RAID, do not support a recovery partition and can't be used with find my mac

    Restart holding down the option/alt key and see if you have a Recovery Volume.
    Recovery Partition – Recreate Without Reinstalling
    Recovery Partition – Recreate Without Reinstalling (Requires Installer)
    Recovery Drive – Restore Missing
    Recovery Disk Assistant

  • ICloud (Find My Mac) won't recognize my Lion Recovery Partition.

    When I open the iCloud prefs, Find My Mac is greyed out and says "Recovery partition required." My recovery partion is bootable and working.
    This happened after I resized my partitions using GParted. As mentioned, I tested the Recovery Partition right after resizing them, and it still works.
    Here is the output of 'diskutil list /dev/disk0':
    /dev/disk0
       #:                  TYPE NAME            SIZE       IDENTIFIER
       0: GUID_partition_scheme                *320.1 GB   disk0
       1:                   EFI                 209.7 MB   disk0s1
       2:             Apple_HFS Macintosh HD    213.9 GB   disk0s2
       3:             Apple_HFS Recovery HD     649.1 MB   disk0s3
       4:  Microsoft Basic Data BOOTCAMP        75.5 GB    disk0s4
       5:  Microsoft Basic Data                 21.0 GB    disk0s5
       6:            Linux Swap                 8.7 GB     disk0s6
    Partition 5 is ext3 formatted for Linux.

    I tried using the RecoveryHDUpdate from Apple, but no dice. When selecting an install disk, it gave this error with a yellow triangle icon:
    Lion Recovery Update can't be installed on this disk. An error occurred while evaluating JavaScript for the package.
    Selecting the Recovery HD itself yielded a different yellow triangle error:
    Lion Recovery Update can't be installed on this disk. This update requires Mac OS X version 10.7.

  • HDD recovery partition to other storage media

    Hi,
    I own a Toshiba laptop model A665-S6094 with 640GB hdd model MK6465GSX.
    Recently, my OS was not started anymore and I suspected that there are some problems with my hdd.
    In fact I was true, there are several bad blocks, I was very disappointed with that, the 640GB hdd has only 1y and 5m, just enough to be out of warranty.
    I tried to revitalize the hdd with hdd regenerator or even zero byte fills program but with no luck. The bad sectors are still there.
    Before I managed to backup my data and also to save the hidden recovery partition, created an iso image from it. I also saved the MBR, just in case. But I do not have any recovery media.
    Now I plan to flush the recovery partition content on a USB stick and to boot from USB device with a brand new hdd. Will this be working?
    If I plan to boot with recovery DVD disks, how I should write the recovery partition on recovery media and how should I split the zzimages folder?
    Are there any differences between the recovery partition and the recovery media disks? After all Toshiba Recovery Disc Creator is using the recovery partition to create recovery media, right?
    Greetings,
    Laurentiu

    All you have to do is make sure the USB stick is formatted NTFS or FAT32 and "active". Then just copy the contents from the root of the recovery partition to the root of the USB stick. Double-check the file "DATA.INI" and make sure that "CDNUM=1" and "CDMAX=1", but if it came from the HDD recovery partition, they should already be correct. Go and and test boot.
    Rick...

  • Where could I find the info where the transport is imported already

    Hello
    I noticed some transport requests were already imported in PRD system. However the copy eas made to QAS system afterwards. So the requests seems not yet to be approved (althought in log they are already imported to PRD).
    Where (in which table etc) could I find the info where the transport is imported already

    Hi,
    As Uday said you can see in E070 table and in Tcode> STMS_IMPORT>Goto Import History
    Regards,
    Kalyan

  • I tried to download Adobe Reader XI. But no where could I find the Acceptance Button.

    I tried to download Adobe Reader XI. I was asked to press the Acceptance Button on the Agreements. But No where can I find it. Could anybody tell me why? Do I have to pay for the downloaded soft ware? I am a Comcast User. I am entitled to download a copy free. What should I do? thanks. Henry

    http://helpx.adobe.com/acrobat/kb/cant-click-accept-acrobat-reader.html

  • I am having difficulties importing files into Thunderbird. Where can I find live chat supprt?

    Before one of my email accounts closed, I saved all of the material from that email account to a sub-folder I created under Local Folders, and saved all of the information as .msf files to my computer. Now when I open Thunderbird, all of the material from the former email account that I saved to the folder is no longer there.
    More importantly, this is a complicated problem that requires more than one answer. Does Mozilla offer Live Chat support, and where can I find it?

    christ1 -The reason I didn't provide more info is because I saved these files to Thunderbird over a year ago, and this problem just came up recently, so quite frankly, I don't remember all the steps I took to save the files at the time. Also, this one-question-at-a-time type of post-and-respond takes hours, and doesn't allow me to check things as I go along in real time.
    Secondly, the main other reason I posted here was to see if Live Chat or any other form of actual '''in person''' support was available. This problem is complicated since we're talking about two different computers, and I've done about all I can on my own. It seems that Live Chat has been cancelled, as James mentioned, so I'm totally stuck without any way to get the files that are missing. Again, I am totally flabbergasted that a company as big as Mozilla seems to be completely unreachable and unaccountable to its users, truly unbelievable.

  • Where could I find the CSI?

    Hello, all,
    Our group bought oracle 10g 3 years ago when I was now here. The guy who installed/configured the oracle left, and very few documentation was left.
    Now we have some problems with the oracle and need the oracle support, but we could not find the CSI. Is there any hard copy or files where we could find it?
    Thank you very much!
    Qian

    How to obtain the Oracle Enterprise Installed Base(CSE)/
    Oracle Installed Base(CSI) Log and Debug files
    The CSE/CSI Log and debug files contain transactional information passed from
    ERP transactions that updates Installed Base. It allows your Oracle Support
    Analyst to gather critical information about the transactions in order to
    troubleshoot where the problem lies. These files are requested by your analyst
    when you report a problem relating to transactions erroring in the Transaction
    Errors Reprocessing Form.
    To generate the Log and Debug files:
    1) Set up the following profiles using the System Administrator Responsibility:
    (N) Profile > System
    a) CSE: Debug Option = Y
    b) CSI: Debug Level = 10
    c) CSI Log File Name = a valid filename
    d,e) CSE: Debug Log Directory and CSI Log File Path = the first directory path
    defined in the 'utl_file_dir' system parameter which has write permissions (e.g. /usr/tmp). You can find out which directory is defined for
    utl_file_dir by running this query in SQLPLUS
    SQL> SELECT value
    FROM v$parameter
    WHERE name = 'utl_file_dir';
    Note: If the activity that is performed uses SFM, bounce (stop/start) the SFM
    concurrent managers whenever this profile has changed.
    For other activities/transactions, the profile setting will not take effect
    until the user logs off and then logs back into the application.
    Refer to Note 204016.1 for instructions on updating the utl_file_dir in the
    init.ora file.
    2) Reprocess the errored transaction from the Transaction Errors Reprocessing Form:
    Using the Oracle Installed Base Admin Responsibility
    (N) Transaction errors Re-Processing
    - Query on the errored transaction
    - Check the Processed flag for one of the errored transactions
    (Note down the Inv Mtl Txn Id)
    - Save
    - Run the concurrent program 'Resubmit Interface Process' with the 'SELECTED'
    option.
    If the profiles have previously been set, you most likely will not need to
    perform step 2. You should already have the log and debug files in the log
    directory.
    3) Once the Resubmit Interface Process completes, the log and debug files are
    available in the log directory as defined in step 1 above. You should see the
    following files:
    a) CSI Log file - based on the profile 'CSI Log File Name'
    b) CSE Log file - system creates CSE log with the system date,
    e.g. cse27-MAY-2003.log - This log generally contains transactional information
    for Subinventory Transfers.
    c) Debug file - Debug files come in the form of <msg_code>.<material_transaction_id>.dbg.
    An example of a debug file for OM_Shipment transactions is csisoshp.3043503.dbg.
    Note that for sales order lines which do not generate inventory material transactions,
    this ID needs to be replaced by the Sales Order Line ID. These transactions would be
    CSISOFUL (Sales Order Fulfillment) and CSIRMAFL (Return Order cancellation). The debug file
    for a Sales Order Fulfillment transaction would be in the form of csisoful.<line_id>.dbg.
    Depending on the type of transaction that errored, your dbg file will have
    different msg_code.
    The following are examples of common transaction types and msg_code:
    Type of Transaction               MSG_CODE
    Sales Order Shipments               csisoshp
    Sales Order Fulfillment               csisoful
    RMA Receipt                    csirmarc
    Sales Order RMA Fulfillment          csirmafl
    WIP Assembly Completion               csiwipac
    WIP Assembly Return               csiwipar
    WIP Component Issue               csiwipci
    WIP Component Return               csiwipcr
    As you have noticed, the inventory material transaction id plays a big part in
    identifying the dbg file. This id is recorded in the Inv Mtl Txn Id column on
    the Transaction Errors Reprocessing form, or the inv_material_transaction_id
    column in CSI_TXN_ERRORS table.
    Remember that 11.5.6+ Oracle Installed Base offers life-cycle tracking of ERP
    transactions and as such, if you are not seeing your Sales Order shipment being
    reflected in Installed Base, you should also look into the possibility that
    prior transactions for the item may have errored out and is therefore causing
    the Sales Order Shipment to be stuck. If such is the case, identify and clear
    out the prior transactions first.
    When logging a TAR with Oracle Support, provide the CSE/CSI log file and dbg
    file for the errored transaction.

Maybe you are looking for