Where'd my lock go?

My "Lock" icon dissapeard. I can't lock the keyboard! I just did a software update to fix another problem (with the address book) and then it was gone.

The lock and standby functions have been changed in OS 5.0. The new options are a keypad lock where you push and hold your mute button (this is similar to the old "standby") or a "password lock" where if you set a password you can lock the device with a password (which is the old "lock.") You wont' get an icon unless you set a password.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

Where are the Lock Screen and the Home buttons on my iPad2

Where are the Lock Screen and the Home buttons on iPad2?

See here http://www.apple.com/support/ipad/
And here
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

The old status bar showed a lock icon when on a secure site - where is that lock icon in vers 4?

The status bar was along the bottom of the window. At the right end of that bar, a lock icon would appear when you are on a secure site, like banking or bill pay. With the status bar now gone, where do I see that lock icon?

The padlock is no longer a part of Firefox; it can give users a false sense that a site is secure by not supplying all of the information about a site. Familiarize yourself with the '''''Site Identity Button''''' in Firefox:
*https://support.mozilla.com/en-US/kb/Site+Identity+Button
*http://www.dria.org/wordpress/archives/2008/05/06/635/
You can install an add-on to show a padlock in the URL/Location/Address bar:
*https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/
<br />
<br />
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Shockwave Flash 10.2 r152
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*See: https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash

Where is the lock on the iPod touch

On my ipod nano it has a lock on top that I can use so while I am listening to music nothing changes by itself, very handy when the ipod is put into a pocket. Where is this feature on the ipod touch?

Top right corner. It is the Sleep/On/Off button.

Where is layer locking stored in psd?

i'm referring to to transparent pixel lock, image pixel lock and position lock. file formats pdf mentions the transparency protected flag at bit 0 in the layer records section - which sounds suspiciously similar, but none of the other locks are to be found.

Where is that name stored in exif or elsewhere
When you assign a custom name for a location, that name is stored in the "Places" database in the Aperture library, and the image versions will reference this place in the Places database. The image version will be tagged with GPS EXIF tags for longitude and latitude, when you export the image, but the location name will not be included. Aperture does not add it to the IPTC tags. If you want to export the names of the places, you have to set the IPTC metadatatags "image location", "image city", "image country" etc. on your own, for example using batch change.

Where is screen lock on iPad Air 2?

Have the new iPad Air 2. Unlike my old iPad 2 (not air) there is no screen lock button to change from portrait to landscape.
Where do I find that feature now?

I found it. From the iPad User Guide for IOS 8.1
. (On iPad models without a side switch, use Control Center.)”
Excerpt From: Apple Inc. “iPad User Guide For iOS 8.1.” Apple Inc., 2014. iBooks.
This material may be protected by copyright.
Check out this book on the iBooks Store: https://itun.es/us/5A6R2.l

Where is the lock symbol that tells me I am on a secure page in Firefox 5.0

I just recently upgraded to Firefox 5.0. The old version had a little lock in the bottom right hand corner that signified that I was on a secure page (for banking, shopping checkout, etc). I do not know where to check on the page of this new version to be sure that I am on a secure page before entering the required checkout info.
Thanks for your help.

The padlock only shows that there is a secure connection and doesn't guarantee that you are connected to the right server. So you might still be connected to the wrong server if you make a typo in the URL and someone has claimed that mistyped URL. The functionality of the padlock has been replaced by the Site Identity Button on the left end of the location (address) bar.
https://support.mozilla.com/en-US/kb/Site+Identity+Button
http://www.mozilla.com/en-US/firefox/security/identity/
This has actually existed since Firefox 3.0
If you still want a padlock icon also then
https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/

N70 - Where auto keyguard lock,alarm snooze,Font s...

N70 -
Pl tell me how to find these features. Are they available on N70?
Where r 1. auto keyguard lock? 2. alarm snooze time setting? 3. Font size change? 4. schedule reminder?
Is there a way to view contact list with name and number? i feel 3G phone series don't have many personalization settings that older ones had. Any help? bjm
http://binujamesmathew.googlepages.com

1. auto keyguard lock?
There isn't anything like you get on the old phones. The nearest thing is to go into the security settings and set the Autolock period to something like 1 minute.
Alternatively, there are 3rd party apps around that replicate the functionality from the old phones - a quick search of this board will give you names (I forget what they are).
2. alarm snooze time setting?
Again, there's nothing you can do about this apart from buy a 3rd party app like "Time Machine" (US$5) which has all that sort of thing, plus timers etc.
3. Font size change?
I think I saw a post about a 3rd party product that did something about this last week - try a search of this forum.
4. schedule reminder?
Just set an alarm on the meeting or to-do item - I don't think the option is available on the other calendar entry types.
5. Is there a way to view contact list with name and number?
Don't think soMessage Edited by patc on 20-Aug-200702:24 PM

Where to set lock while loading master data attributes

Hello Experts,
I have two different datasources from ECC which loads into 0CUST_SALES attributes. I'm using two different DTP & transformation which are loading data in the this infoobject attributes.
When i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".
Here what exactly LOCK means?
Thanks in advance.
Zakir Khan.

Hi,
The lock means that some program is updating the master data (a table) and at the same time other program can not update that same master data. When the first program completes the updation it will release the lock so that the other program can update this.
In your case you and schedule the DTP one after another.
Thanks

Why wont the image rotate on my screen? Where is the lock?

The image stopped going to landscape on my 4s after installing 7.0.?. Is there a lock somewhere? I tried following on line directions but cannot find lock.

Hello Wally,
The orientation lock control is now located in the Control Center on your iPhone. If you swipe up from the bottom of the screen, you will see the option to lock or unlock the orientation:
Swipe up along the bottom of the screen to display Control Center (you can do this from any screen, including the Lock screen).
Tap the Screen Rotation Lock button.
If the button was highlighted, the button will appear dimmed after tapping it.
I recommend reviewing the full article if the issue persists:
iOS: Screen does not rotate
http://support.apple.com/kb/TS3805
Thank you for using Apple Support Communities.
Best,
Sheila M.

Where we use lock objects in our coding like report

what is the purpose of lock objects s? how we use them in real time? like in devoloping reports?

Hi,,.
Lock objects are use in SAP to avoid the inconsistancy at the time of data is being insert/change into database.
SAP Provide three type of Lock objects.
- Read Lock(Shared Locked)
protects read access to an object. The read lock allows other transactions read access but not write access to
the locked area of the table
- Write Lock(exclusive lock)
protects write access to an object. The write lock allows other transactions neither read nor write access to
the locked area of the table.
- Enhanced write lock (exclusive lock without cumulating)
works like a write lock except that the enhanced write lock also protects from further accesses from the
same transaction.
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
Check these links
Re: Lock Objects
http://help.sap.com/saphelp_47x200/helpdata/en/ce/931bb5c79911d5993e00508b6b8b11/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://www.sapdevelopment.co.uk/dictionary/lock_enqueue.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a2/3547360f2ea61fe10000009b38f839/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
Lock objects are use in SAP to avoid the inconsistancy at the time of data is being insert/change into database.
SAP Provide three type of Lock objects.
- Read Lock(Shared Locked)
protects read access to an object. The read lock allows other transactions read access but not write access to
the locked area of the table
- Write Lock(exclusive lock)
protects write access to an object. The write lock allows other transactions neither read nor write access to
the locked area of the table.
- Enhanced write lock (exclusive lock without cumulating)
works like a write lock except that the enhanced write lock also protects from further accesses from the
same transaction.
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
Lock objects are use in SAP to avoid the inconsistancy at the time of data is being insert/change into database.
SAP Provide three type of Lock objects.
- Read Lock(Shared Locked)
protects read access to an object. The read lock allows other transactions read access but not write access to
the locked area of the table
- Write Lock(exclusive lock)
protects write access to an object. The write lock allows other transactions neither read nor write access to
the locked area of the table.
- Enhanced write lock (exclusive lock without cumulating)
works like a write lock except that the enhanced write lock also protects from further accesses from the
same transaction.
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
GO TO SE11
Select the radio button "Lock object"..
Give the name starts with EZ or EY..
Example: EYTEST
Press Create button..
Give the short description..
Example: Lock object for table ZTABLE..
In the tables tab..Give the table name..
Example: ZTABLE
Save and generate..
Your lock object is now created..You can see the LOCK MODULES..
In the menu ..GOTO -> LOCK MODULES..There you can see the ENQUEUE and DEQUEUE function
Lock objects:
http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
Match Code Objects:
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
http://searchsap.techtarget.com/tip/0,289483,sid21_gci553386,00.html
See this link:
http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
Lock objects are used to synchronize access to the same data by more than one program.
General information about the lock mechanism.
You can synchronize access by several programs to the same data with a logical lock mechanism. This lock mechanism fulfills two main functions:
A program can tell other programs which data records it is just reading or changing.
A program can prevent itself from reading data that is just being changed by another program.
When accessing data records, the records just being edited by other programs can be identified by the entry in the lock table. Such an entry for the lock must define a number of fully specified key fields, that is either a value is passed for the key field or this field is locked generically.
To set locks, a lock object must be defined in the ABAP Dictionary. When this lock object is activated, two function modules (see Function Modules for Lock Requests) are generated with the names ENQUEUE_<lockobjectname> and DEQUEUE_<lockobjectname>.
If data records are to be locked, you must call function module ENQUEUE_<lockobjectname>. The values of the key fields that specify the records to be locked are passed for all the tables contained in the lock object when the function module is called. There is a generic lock if a value is not passed for all the key fields. The function module writes the appropriate lock entry (see Example for Lock Objects). If another program also requests a lock, it will be accepted or rejected depending on the lock mode (see Lock Collisions). The program can then react to this situation.
Locked data records can be unlocked by calling function module DEQUEUE_<lockobjectname>. The key values and the lock mode used to set the lock must be passed to the function module.
Creating Lock Objects
Procedure
Select object type Lock object in the initial screen of the ABAP Dictionary, enter an object name and choose Create. The name of a lock object should begin with an E (Enqueue).
The maintenance screen for lock objects is displayed.
Enter an explanatory short text in the field Short text.
You can then use the short text to find the lock object at a later time, for example with the R/3 Repository Information System.
Enter the name of the primary table of the lock object.
All other tables in the lock object must be linked with the primary table using foreign keys. There are also some restrictions on the valid foreign key relationships.
Select the lock mode of the primary table in the field below it.
The lock mode is used as the default value for the corresponding parameters of the function modules generated from the lock object.
Choose Add if you want to lock records in more than one table with the lock object.
A list of all the tables linked with the primary table using valid foreign keys is displayed. Select the appropriate table. The lock mode of the primary table is copied as lock mode. You can change this setting as required, for example you can assign the lock mode separately for each table.
Similarly, you can add a table linked with the secondary table just added with foreign keys. To do this, place the cursor on the name of the secondary table and choose Add.
If no lock mode is assigned to a table, no lock is set for the entries in this table when the generated function modules are called. You should not assign a lock mode if a secondary table was only used to define a path between the primary table and another secondary table with foreign keys.
Save your entries.
A dialog box appears in which you have to assign the lock object a development class.
You can (optionally) exclude lock parameters (see lock objects) from the function module generation on the Lock parameter tab page. This makes sense for example if you always want to lock a parameter generically.
To do this, simply deselect the Weight flag for the parameter. The parameter is not taken into consideration in the generated function modules. This parameter is then always locked generically.
The name of a lock parameter is usually the name of the corresponding table field. If two fields with the same name are used as lock parameters in the lock object from different tables, you must choose a new name for one of the fields in field Lock parameter.
You can define whether the function modules generated from the lock object should be RFC-enabled on the Attributes tab page.
If you set the Allow RFC flag, the generated function modules can be called from within another system with Remote Function Call.
If you permit Remote Function Calls for an existing lock object, you must ensure that the generated function modules are called from within an ABAP program with parameters appropriate for the type. You should therefore check all programs that use the associated function modules before activating the lock object with the new option.
Choose .
Result
When you activate the lock object, the two function modules ENQUEUE_<lockobjectname> and DEQUEUE_<lockobjectname> are generated from its definition to set and release locks.
Regards
Vasu

Where is the lock sign for trusted connections?

We are building websites for customers. For several customers we build a webshop with iDeal support. iDeal is a payment implementation which is supported by the main banks in The Netherlands. These banks provide a secure connection.
But since FF 4, the lock sign is replaced with a bar at the beginning of the url. So many of our customers complained that their customers don't have the impression that the connection is secure..... So our customers have less completed orders...
So can you please bring back the yellow lock sign?

The padlock has been replaced by the site identity button which provides more information than the padlock. For details on using it see https://support.mozilla.com/kb/Site+Identity+Button
Those that want a padlock icon can install the Padlock add-on - https://addons.mozilla.org/firefox/addon/padlock-icon/

Where is the lock icon in printers pop up menu

anyone know why the lock icon doesn't show up in printers & Scanners window?

The "Lock/Unlock" feature is enabled by installing a compatible Smart Cover/Case (or third-party equivalent) with an embedded magnet in the correct position in the cover. Are you using a real Apple product? If not, the cover/case you are using may not have the magnet in the right place or may not even have one at all.
If you ARE using a real Apple Smart Cover/Case and you have an Apple Store nearby, have them check both the case and cover you are using. You may have a bad magnectic switch on the iPad or a faulty cover/case.
I also remember reading here of a Smart Case/Cover which had the magnet installed upside-down and was repelling rather than attracting. You might want to take the cover off and flip it to verify this...you'll have to slide the cover around in different positions on the right-hand bezel on the iPad to see if you can activate the magnet.
The setting (when enabled by a compatible Smart Cover/Case) would be under Settings/General.

Where is drag lock for my new Magic Pad?

I just bought a new magic pad for my iMac. I really like it and I have touch to click enabled. I am trying to find an easier way to click and drag other than click with my thumb and draging with my finger. I read something about drag lock that would do this but I don't see if in the System Preferences. Have things changed? Is there a way to click and drag that doesn't involve an hard click?
Thanks.

Two ways to do this:
You can use the 3 finger drag option in System Preferences > Trackpad > Point & Click tab > check 3 finger drag. Note this method will alter other 3 finger gestures.
The other method is in System Preferences > Accessibility > Mouse & Trackpad in list on left > Trackpad options... button > check Enable dragging with or without drag lock. This is a double tap and hold method of dragging.

Where is the lock icon when i am ordering something on line

when i order something on line with internet explorer a lock icon comes up to let me know i am secure how does firefox work in this case?

The favicon (the icon before the address) should have a blue or green box around it if you are on a secure connection (it should also say https://..... after it). Click the favicon and security information (including a padlock) will be displayed to verify the connection. (Green is more secure.)
More info:
https://support.mozilla.com/en-US/kb/Site%20Identity%20Button

Where'd my lock go?

Similar Messages

Maybe you are looking for